[Users] RIDICULOUS!!!! NetApp pulls back FREE Downloadable VSC Plugin from Community !!!

2014-03-22 Thread Matt .
and with emails, irc, so on to get this small piece of software right... they also dind't charge you for that. It's bad in the name for NetApp so I hope you guys het it right again! Cheers, Matt The original email to the mailinglist: On older systems it's quite nice to test this out, you don't need

[Users] Cannot Ping CARP/Spoofed address

2014-04-06 Thread Matt .
EnableMACAntiSpoofingFilterRules=false --cver=3.3 (The clusters are 3.3 compatible) In some strange way this is not working in any way. How can we solve this, as I'm out of options. Thanks! Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman

Re: [Users] Cannot Ping CARP/Spoofed address

2014-04-06 Thread Matt .
nics ? Cheers, Matt 2014-04-07 3:12 GMT+02:00 Matt . yamakasi@gmail.com: Hi Dan, Thank you for your reply! I have installed that hook and removed it again because I was not sure. Following the mailinglist it looks like it's globally doable, so it's actually not ? I understand

Re: [Users] Cannot Ping CARP/Spoofed address

2014-04-06 Thread Matt .
HI, I managed it by using the commands on that hook page. It seems that you enable it for a whole VM indeed. Nice! Thanks for the clarification! Cheers, Matt 2014-04-07 4:07 GMT+02:00 Matt . yamakasi@gmail.com: Hi Dan, Thank you for your reply! I have installed that hook

[Users] oVirt 3.4 Templates break Foreman Provisioning/Adding host

2014-04-07 Thread Matt .
! Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] oVirt 3.4 Templates break Foreman Provisioning/Adding host

2014-04-08 Thread Matt .
for add 2014-04-08 9:07 GMT+02:00 Michal Skrivanek michal.skriva...@redhat.com: On Apr 7, 2014, at 14:47 , Matt . yamakasi@gmail.com wrote: Hi Guys, On Foreman 1.4.2 it seems that you have issues with oVirt 3.4 when adding a host. When you add this host you will get

Re: [Users] oVirt 3.4 Templates break Foreman Provisioning/Adding host

2014-04-08 Thread Matt .
option to get rid of Default Datacenter. I didn't see logs @ the engine.log to be honest. Cheers, Matt 2014-04-08 14:17 GMT+02:00 Michal Skrivanek michal.skriva...@redhat.com: On Apr 8, 2014, at 14:08 , Matt . yamakasi@gmail.com wrote: Hi, It seems that it's an issue

[ovirt-users] Connection hickups with Pfsense and Carp

2014-04-15 Thread Matt .
because of disconnects, also a good tcdump. Do I need to make specific settings on the vswitch or the real switch between ? Or is something else going on ? Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo

Re: [ovirt-users] Connection hickups with Pfsense and Carp

2014-04-16 Thread Matt .
This is resolved. It seems that skews that pfsense sets on a backup/failover cluster node are much higher than they were set manually. Pfsense synced them again and it's solved. 2014-04-15 8:52 GMT+02:00 Matt . yamakasi@gmail.com: Hi Guys, I'm facing some issues with Pfsense and a Carp

Re: [ovirt-users] Connection hickups with Pfsense and Carp

2014-04-16 Thread Matt .
on a VM there I think the vswitch only needs the mode. Information is welcome! 2014-04-16 11:18 GMT+02:00 Matt . yamakasi@gmail.com: This is resolved. It seems that skews that pfsense sets on a backup/failover cluster node are much higher than they were set manually. Pfsense synced them

Re: [ovirt-users] Connection hickups with Pfsense and Carp

2014-04-16 Thread Matt .
OK, also this is finetuned, but it would be nice to have some more info about the hooks in these cases... it's interesting as oVirt has the right settings to start with but we need to know what we need to set when we have a setup like this for an example. 2014-04-17 0:35 GMT+02:00 Matt

Re: [ovirt-users] Connection hickups with Pfsense and Carp

2014-04-17 Thread Matt .
. 2014-04-17 9:08 GMT+02:00 Dan Kenigsberg dan...@redhat.com: On Thu, Apr 17, 2014 at 01:11:13AM +0200, Matt . wrote: OK, also this is finetuned, but it would be nice to have some more info about the hooks in these cases... it's interesting as oVirt has the right settings to start

[ovirt-users] Foreman not starting VM, hangs on finishing creating a new VM

2014-04-23 Thread Matt .
EngineLock [exclusiveLocks= key: 7bfc175c-dbcd-43c9-9549-cde8d3b3b731 value: VM I get the feeling this has something todo with eachother. Any idea here ? Thanks! Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Foreman not starting VM, hangs on finishing creating a new VM

2014-04-24 Thread Matt .
Would it be normal that it does this login runs a couple of times per second ? 2014-04-24 7:50 GMT+02:00 Itamar Heim ih...@redhat.com: On 04/23/2014 09:50 PM, Matt . wrote: Hi All, I'm having an issue with oVirt 3.4 and Foreman 1.5 RC1 at the moment, it does not start/finish a new

Re: [ovirt-users] Foreman not starting VM, hangs on finishing creating a new VM

2014-04-24 Thread Matt .
Any idea on this ? It seems that the logins also exist on a 3.4.3 system with FM 1.4.2... 2014-04-24 10:18 GMT+02:00 Matt . yamakasi@gmail.com: I think the same, it tries to relogin after the VM is created and tries to start it... When I cancel the VM in Foreman it stops... So

Re: [ovirt-users] Foreman not starting VM, hangs on finishing creating a new VM

2014-04-24 Thread Matt .
Hi Guys. This just seems to work again as it did before on this same install. I didn't change a thing here so I will report when it's happening again... No clue yet! Thanks, Matt 2014-04-24 23:29 GMT+02:00 Matt . yamakasi@gmail.com: Any idea on this ? It seems that the logins

Re: [ovirt-users] Connection hickups with Pfsense and Carp

2014-05-12 Thread Matt .
Hi, I really needed to enable the hook... Will investigate on new hosts! 2014-05-11 22:37 GMT+02:00 Itamar Heim ih...@redhat.com: On 04/17/2014 04:08 AM, Matt . wrote: Hi Guys, I'm not able to write a howto yet as we need to check how this is running on high traffic and we are going soon

Re: [ovirt-users] [Users] Cannot Ping CARP/Spoofed address

2014-05-15 Thread Matt .
At the moment I'm not able to ping an IP with the macspoof hook installed on the host it runs on and macspoof=true on the VM... what could this be ? 2014-04-07 11:24 GMT+02:00 Dan Kenigsberg dan...@redhat.com: On Mon, Apr 07, 2014 at 05:01:07AM +0200, Matt . wrote: HI, I managed

Re: [ovirt-users] Connection hickups with Pfsense and Carp

2014-05-15 Thread Matt .
with macspoof set on true on a VM. 2014-05-15 12:35 GMT+02:00 Itamar Heim ih...@redhat.com: On 05/15/2014 04:26 AM, Matt . wrote: Itamar, On some testhost I'm updating now to 3.4(.x) I also need to install the hook it seems... it's not there by default. Any idea why you thought it should

Re: [ovirt-users] Connection hickups with Pfsense and Carp

2014-05-15 Thread Matt .
OK, we are on the same line there. The issue is that it doesn't work on this host, others do. I have a 3.3 cluster and 3.4... both are enabled using the command... or can't you have 2 versions ? 2014-05-15 12:43 GMT+02:00 Itamar Heim ih...@redhat.com: On 05/15/2014 06:42 AM, Matt . wrote

Re: [ovirt-users] [Users] Cannot Ping CARP/Spoofed address

2014-05-15 Thread Matt .
, 2014 at 12:02:06PM +0200, Matt . wrote: At the moment I'm not able to ping an IP with the macspoof hook installed on the host it runs on and macspoof=true on the VM... what could this be ? It could be many things. But let's try to rule out oVirt bugs. Take a look at virsh -r dumpxml vm

Re: [ovirt-users] Connection hickups with Pfsense and Carp

2014-05-15 Thread Matt .
... ? Cheers, Matt 2014-05-15 13:39 GMT+02:00 Dan Kenigsberg dan...@redhat.com: On Thu, May 15, 2014 at 12:45:46PM +0200, Matt . wrote: OK, we are on the same line there. The issue is that it doesn't work on this host, others do. It is very hard for me to follow your condition, and top-posting

Re: [ovirt-users] [Users] Cannot Ping CARP/Spoofed address

2014-05-15 Thread Matt .
It seems that you can migrate a VM with macspoof=true from a host with the hook installed to a host without the hook installed you can still ping the host after migrating. Is this known/bug/normal ? 2014-05-15 13:40 GMT+02:00 Matt . yamakasi@gmail.com: I already did a virsh -r dumpxml

Re: [ovirt-users] Selecting which host to run a VM on using ovirt-shell

2014-05-28 Thread Matt .
on the setup tabs. Cheers, Matt 2014-05-28 21:06 GMT+02:00 Joop jvdw...@xs4all.nl: Hi List, As per the subject, I have a desire to start a lot of VMs after a maintenance shutdown of our infrastructure and I would like to either evenly spread the load among the hosts or to restart the VMs

Re: [ovirt-users] Selecting which host to run a VM on using ovirt-shell SOLVED

2014-05-28 Thread Matt .
Joop, I think you need to check if that is the same as Start Once , which I think it is. This does only start it there for once, you might want to set a default server too. 2014-05-28 22:57 GMT+02:00 Joop jvdw...@xs4all.nl: Joop wrote: Hi List, As per the subject, I have a desire to start

Re: [ovirt-users] Recommended for production environment

2014-06-25 Thread Matt .
You don't have to wait for CentOS 7, just use 6 at the moment! 2014-06-25 9:15 GMT+02:00 Sven Kieske s.kie...@mittwald.de: Am 25.06.2014 08:31, schrieb lucas castro: What's the OS recommended to use in production? I make all my tests on fedora, but centos is stable, fedora update. choosing

[ovirt-users] Mac-address Priority Messup

2014-08-24 Thread Matt .
? Thanks! Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] VSDM Hosts Swapspace

2014-10-18 Thread Matt .
recommended SWAP calculation for a machine with 16 GB of RAM: (16 GB x 0.5) + 8 GB = 16 GB Would VM's make the Host swap that fast when the mem is overcommitted ? I have tested this and don't see much more than 1,5GB of swap usage. I hope someone can tell me how they see/use this. Matt

[ovirt-users] VM = No bootable device on Centos 7 VDSM, 6.5 boots perfectly

2014-10-20 Thread Matt .
local but it doesn't see any disk it seems. When I boot the same machine on an existing 6.5 host it boots with away. Any idea here? Thanks! Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] VM = No bootable device on Centos 7 VDSM, 6.5 boots perfectly

2014-10-20 Thread Matt .
That is not mixed I thought. Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] node host os: CentOS 6.5 vs 7

2014-10-20 Thread Matt .
Hi, Have you testes a host with centos 7 already ? It's not booting my VM's here atm. Cheers, Matt 2014-10-20 18:09 GMT+02:00 Robert Story rst...@tislabs.com: My current hosts are 6.5, and I'm not thrilled about the prospect of upgrading to 7. Is there any big advantage to using 7 for oVirt

[ovirt-users] Cannot configure Libvirt, certificate invalid

2014-10-22 Thread Matt .
of certificates is invalid I hope someone can help out. Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] There can only be one one not approved host in the engine ?

2014-10-22 Thread Matt .
Hi All, Is it true that you can have only one host waiting for approval in the engine ? This is kinda an issue when you provision multiple hosts @ once. Ideas are welcome. Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org

Re: [ovirt-users] There can only be one one not approved host in the engine ?

2014-10-22 Thread Matt .
-10-22 13:44 GMT+02:00 Matt . yamakasi@gmail.com: Hi All, Is it true that you can have only one host waiting for approval in the engine ? This is kinda an issue when you provision multiple hosts @ once. Ideas are welcome. Cheers, Matt

[ovirt-users] Ovirt 3.5 VDSM Crashing on Networknames ?

2014-10-23 Thread Matt .
are brought down it seems. Anyone seeing this and knows why this happens ? Libvirt is 1.1.1 Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt 3.5 VDSM Crashing on Networknames ?

2014-10-24 Thread Matt .
I created a bug for this: https://bugzilla.redhat.com/show_bug.cgi?id=1156234 2014-10-23 19:30 GMT+02:00 Matt . yamakasi@gmail.com: I'm having a very strange issue on (some) VDSM hosts. Host is going down and VM's cannot find disk while booting, what do my logs show

Re: [ovirt-users] VM = No bootable device on Centos 7 VDSM, 6.5 boots perfectly

2014-10-25 Thread Matt .
on Centos 6.5 with the 3.5 Engine. Any usecases on Centos 7 and 3.5 hosts ? Cheers, Matt 2014-10-20 16:46 GMT+02:00 Matt . yamakasi@gmail.com: I cannot find the docs atm, but even with a upgraded engine to 3.5, same issue. 2014-10-20 16:07 GMT+02:00 Daniel Helgenberger daniel.helgenber...@m

Re: [ovirt-users] VM = No bootable device on Centos 7 VDSM, 6.5 boots perfectly

2014-10-26 Thread Matt .
Hi, I have tested the 3.4 release also on CentOS7 as host which gave me the same result. It seems CentOS 7 is the killer here. Matt 2014-10-26 2:14 GMT+01:00 Matt . yamakasi@gmail.com: HI, I'm still struggeling here with the 3.5 hosts on CentOS 7, no booting servers

Re: [ovirt-users] VM = No bootable device on Centos 7 VDSM, 6.5 boots perfectly

2014-10-26 Thread Matt .
NFS. I will update the bugreport! Thanks again. Cheers, Matt 2014-10-26 14:34 GMT+01:00 Tiemen Ruiten t.rui...@rdmedia.com: I have two CentOS 7 hosts in a 3.5 cluster, working fine. My storage domain is iSCSI and I have only one logical network, no VLAN tagging. There's one Centos 7 VM

Re: [ovirt-users] VM = No bootable device on Centos 7 VDSM, 6.5 boots perfectly

2014-10-26 Thread Matt .
Tiemen, Are you PXE booting or are it normal installs ? Cheers, Matt 2014-10-26 14:43 GMT+01:00 Matt . yamakasi@gmail.com: Hi, Thanks for your reply! I think I just found out that it's a Firewall issue on CentOS 7. I have them normally off, but these were on as that should be setup

Re: [ovirt-users] replace ovirt engine host

2014-11-07 Thread Matt .
. Did it some time ago because I needed more performance. VDSM can run without the engine, it doesn't need it as the egine monitors and does the commands, so when it's not there... VM's just run (until you make them die yourself :)) I would give it 15-30 min/ Cheers, Matt 2014-11-07 18:36 GMT+01

[Users] No Master Storage Domain added

2012-11-18 Thread Matt .
Hi All, I have some strange issue at the moment after clearing my installation and did a new egine-setup. When I want to attach a data-domain to a datacenter I always get the message that I need to activate my Master Storage Domain, but it isn't there. As far as I know this Master Storage

[Users] Cannot add local storage on 3.2

2013-02-03 Thread Matt .
Hi All, I have made a successfull install of 3.2 but there seems to be changed a lot about local storage comparing to 3.1 When I want to add storage on a local host there is a Datacenter and Cluster created for this Host, named by the name of the host. After this, the local storage is not

Re: [Users] Cannot add local storage on 3.2

2013-02-03 Thread Matt .
This is strange than. When I configure local storage from the hosts tab, I get a new DC and Cluster added. When I add the local storage from the storage tab I cannot add it also. What is the idea about the local storage ? I cannot remeber from 3.1 at the moment but I thought I always added it

Re: [Users] Cannot add local storage on 3.2

2013-02-03 Thread Matt .
OK, thanks! So you don't have local storage on a KVM node, so not the management server. I would like to have this again and I think I need to setup an export with NFS. 2013/2/3 Gianluca Cecchi gianluca.cec...@gmail.com On Sun, Feb 3, 2013 at 3:42 PM, Matt . wrote: This is strange than

Re: [Users] Cannot add local storage on 3.2

2013-02-03 Thread Matt .
Hi, I have it working again. It had something todo with the 36:36 permissions indeed and a restart of NFS on the Node. Thanks! 2013/2/3 Gianluca Cecchi gianluca.cec...@gmail.com On Sun, Feb 3, 2013 at 5:24 PM, Matt . wrote: OK, thanks! So you don't have local storage on a KVM node

Re: [Users] Add NIC directly to VM (Dedicated)

2013-02-10 Thread Matt .
. Thanks so far. Cheers, Matt 2013/2/10 Dan Kenigsberg dan...@redhat.com On Sun, Feb 10, 2013 at 12:19:57PM +0100, Matt . wrote: Hi, For setting up a firewall in a VM I would like to add 2 of my 4 nics directly to a VM. In my previous setup I thought I have done that, but at the moment I

Re: [Users] Add NIC directly to VM (Dedicated)

2013-02-10 Thread Matt .
it should be a bug. Is this right ? Cheers, Matt 2013/2/10 Shahar Havivi shah...@redhat.com On 10.02.13 14:13, Dan Kenigsberg wrote: On Sun, Feb 10, 2013 at 12:19:57PM +0100, Matt . wrote: Hi, For setting up a firewall in a VM I would like to add 2 of my 4 nics directly to a VM

Re: [Users] Add NIC directly to VM (Dedicated)

2013-02-10 Thread Matt .
the above, could have been possible that I have set the Mac-Address of the real Nic @ the VM Nic ? As this is possible that might have been the solution I used ? For the rest this software is good and the support is superb! Thanks so far again. Matt 2013/2/10 Shahar Havivi shah...@redhat.com

Re: [Users] Add NIC directly to VM (Dedicated)

2013-02-10 Thread Matt .
Here: http://www.mail-archive.com/users@ovirt.org/msg06261.html 2013/2/10 Shahar Havivi shah...@redhat.com On 10.02.13 16:36, Matt . wrote: Hi, I'm thinking about the way how I did that with the dedicated NIC to the VM. I was discussing this a couple of months ago on IRC but I can't

[Users] How do Networks and Vlan-tagging work in oVirt ?

2013-02-11 Thread Matt .
I'm struggeling setting up my network in oVirt at the moment as I would like to seperate specific VM's from other devices/clients in my network. I have decent setup switching network using Vlans, this is also the fact for ovirt and the storage nodes where teh ports are seperated between storage

Re: [Users] How do Networks and Vlan-tagging work in oVirt ?

2013-02-12 Thread Matt .
: VDSGenericException: VDSNetworkException: Specified netmask or gateway but not ip Why does this happen on None Bootproto or DHCP ? 2013/2/12 Moti Asayag masa...@redhat.com On 02/11/2013 12:37 PM, Matt . wrote: I'm struggeling setting up my network in oVirt at the moment as I would like

Re: [Users] How do Networks and Vlan-tagging work in oVirt ?

2013-02-13 Thread Matt .
Ecarnot nico...@ecarnot.net Le 12/02/2013 22:43, Moti Asayag a écrit : On 02/11/2013 12:37 PM, Matt . wrote: I'm struggeling setting up my network in oVirt at the moment as I would like to seperate specific VM's from other devices/clients in my network. You should define the 'logical

Re: [Users] Cannot remove disk, storage domain corrupted ?

2013-02-28 Thread Matt .
--127.0.0.1-8702-5) Running command: LoginUserCommand internal: false. What could this be ? Thanks, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Documentation: Storage Domain conversion from Data Domain to Export Domain

2013-03-01 Thread Matt .
Thanks for this. I'm on the Dreyou version and hope that I can update to this at the moment. 2013/3/1 Itamar Heim ih...@redhat.com On 01/03/2013 10:40, Matt . wrote: I have tried this with a domain that was not master and I can import it. Strange is that all tabs, also the VM's that I

[Users] Copy VM using the commandline

2013-03-03 Thread Matt .
and placing backups back I would like to know if I can copy the images from this folder to a storage device that can be seen normal. I hope this is possible. Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo

Re: [Users] fail to shutdown vM

2013-03-03 Thread Matt .
Hi, I had the same issue, are you on 3.2 ? Storage was in some strange way an issue, maybe an update that did that. Matt 2013/3/3 Itamar Heim ih...@redhat.com On 03/03/2013 17:49, bigclouds wrote: hi, all: on the webUI i can not shutdown VM. i see logs, because finally it calls

Re: [Users] Copy VM using the commandline

2013-03-03 Thread Matt .
. -- *De: *Matt . yamakasi@gmail.com *Para: *users users@ovirt.org *Enviados: *Domingo, 3 de Marzo 2013 19:20:03 *Asunto: *[Users] Copy VM using the commandline Is it possible to copy a VM from storage node to storage node by using the commandline ? ISO

[Users] Cluster, hosts, everything down and totally stuck

2013-03-07 Thread Matt .
we can sort this out. Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[Users] Upgrade from 3.2 to 3.3 fails because of Jboss-as conflicts

2013-06-14 Thread Matt .
/noredirect.html from install of jboss-as-7.1.1-10.el6.x86_64 conflicts with file from package ovirt-engine-jbossas711-1-0.x86_64 This is just a part of the log where the conficts are. *For the rest, the rollback to 3.2 works like charm * Thanks and Cheers, Matt

Re: [Users] Upgrade from 3.2 to 3.3 fails because of Jboss-as conflicts

2013-06-14 Thread Matt .
Hi, It's just the update and indeed I use Centos 6.4. Matt 2013/6/14 Alon Bar-Lev alo...@redhat.com Hi, What is ovirt-engine-jbossas711? Why do you need it? Use the standard jboss-as. Do you use centos? Alon - Original Message - From: Matt . yamakasi@gmail.com

Re: [Users] Upgrade from 3.2 to 3.3 fails because of Jboss-as conflicts

2013-06-14 Thread Matt .
. - Original Message - From: Matt . yamakasi@gmail.com Cc: users users@ovirt.org Sent: Friday, June 14, 2013 12:18:04 PM Subject: Re: [Users] Upgrade from 3.2 to 3.3 fails because of Jboss-as conflicts Hi, It's just the update and indeed I use Centos 6.4. Matt 2013/6/14

Re: [Users] Upgrade from 3.2 to 3.3 fails because of Jboss-as conflicts

2013-06-14 Thread Matt .
. - Original Message - From: Matt . yamakasi@gmail.com Cc: users users@ovirt.org Sent: Friday, June 14, 2013 12:26:18 PM Subject: Re: [Users] Upgrade from 3.2 to 3.3 fails because of Jboss-as conflicts OK, but what is the soltion for this issue ? Or isn't there one yet

Re: [Users] Upgrade from 3.2 to 3.3 fails because of Jboss-as conflicts

2013-06-14 Thread Matt .
OK, a manual stop of ovirt-engine fixed it, the script was not able anymore as jboss was removed! Upgarde went fine it says, let's rock and roll! Thanks! 2013/6/14 Matt . yamakasi@gmail.com I get the following than: During the upgrade process, oVirt Engine will not be accessible. All

[Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-14 Thread Matt .
HI All, I upgraded to 3.3 and tried to start a console. Whatever version of console I set, VNC or Spice, the browser downloads a console.vv file now. Am I doing something wrong or is this just the unreleased version ? Thanks for the help! Cheers, Matt

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-14 Thread Matt .
Hi Andrew, On the ovirt-engine ? 0.5.2 2013/6/14 Andrew Cathrow acath...@redhat.com what version of remote-viewer/virt-viewer do you have installed? virt-viewer 0.5.6 included mime type support. -- *From: *Matt . yamakasi@gmail.com *To: *users users

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-14 Thread Matt .
Matt . yamakasi@gmail.com Hi Andrew, On the ovirt-engine ? 0.5.2 2013/6/14 Andrew Cathrow acath...@redhat.com what version of remote-viewer/virt-viewer do you have installed? virt-viewer 0.5.6 included mime type support. -- *From: *Matt . yamakasi

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-14 Thread Matt .
OK, thanks. Need to check how I can add this patch from git without breaking stuff. 2013/6/14 Alon Bar-Lev alo...@redhat.com Known issue, was broken per[1] [1] http://gerrit.ovirt.org/#/c/14895/ - Original Message - From: Matt . yamakasi@gmail.com Cc: users users@ovirt.org

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-14 Thread Matt .
I have changed that, but the linkin ovirt will remain the same of course 2013/6/14 Alon Bar-Lev alo...@redhat.com - Original Message - From: Matt . yamakasi@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: users users@ovirt.org, Frantisek Kobzik fkob...@redhat.com Sent

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-14 Thread Matt .
OK, thanks. I'm not 100% sure about what to do now. I have to change the servlet, but where ? A locate on the servlet didn't have me any match. Cheers, Matt 2013/6/14 Alon Bar-Lev alo...@redhat.com - Original Message - From: Alon Bar-Lev alo...@redhat.com To: Frantisek Kobzik

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-14 Thread Matt .
Hi Alon, I have stopped there, but I get a console.vv download again on my Firefox and no console! Cheers, Matt 2013/6/14 Alon Bar-Lev alo...@redhat.com Hi Matt, You should have stopped when it worked to you... :) I guess by placing 'console/' I was talking to Frank regarding

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-14 Thread Matt .
have to do this manually. Thanks again!! Cheers, Matt 2013/6/14 Frantisek Kobzik fkob...@redhat.com Hi Matt! Right now I'm not sure whether you are trying to launch console via MIME (i.e. the console.vv is served to your locally installed virt-viewer) or you want to run noVNC html client

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-17 Thread Matt .
.20130609231551.gitc493152.el6.noarch I was running: ovirt-engine-websocket-proxy-3.3.0-0.2.master.20130609231551.gitc493152.el6.noarch Thanks! 2013/6/17 Frantisek Kobzik fkob...@redhat.com Hi Matt, could you specify what version/build of ovirt-websocket-proxy do you use? Thanks, Frank

[Users] Booting oVirt CentOS nodes from PXE ?

2013-06-17 Thread Matt .
Hi All, I'm wondering if it's possible to PXE boot nodes so we don't need to install every server on local disks. I have read something in the docs about a Fedora ISO, but how does this work and will it be possible with CentOS ? Thanks! Cheers, Matt

Re: [Users] Booting oVirt CentOS nodes from PXE ?

2013-06-17 Thread Matt .
Hi Matt, Are you willing to share some information ? How do you build that CentOS version and so on ? Would be nice to now! Thanks, Matt 2013/6/17 Matt Curry mcu...@skopos.us Yeah it works fine; I do a LOT of them. [image: Skopos Website] http://www.skoposfinancial.com/ *MATT CURRY

Re: [Users] oVirt 3.3 does not start HTML5/noVNC viewer

2013-06-18 Thread Matt .
Hi, I'm running CentOS 6.4 2013/6/18 Frantisek Kobzik fkob...@redhat.com Hi Matt, I just tried installing nightly websocket proxy on my Fedora 18 and it runs fine. Which system do you run? Thanks, Frank. - Original Message - From: Matt . yamakasi@gmail.com

Re: [Users] Booting oVirt CentOS nodes from PXE ?

2013-06-19 Thread Matt .
Hi Matt, As far as the oVirt developers have told me they are still busy building this ISO and will be released soon. How have you done this in the time between ? I think you are installing using PXE rather than booting from it ? Cheers, Matt 2013/6/17 Matt . yamakasi@gmail.com Hi Matt

Re: [Users] NetApp plugin/package. Is this available or planned ?

2013-06-26 Thread Matt .
Hi, I have checked this group @ the NetApp communities. It's unclear to me if this will be free for ever, I think it should and hope it will as the community can support such modules much more than someone that pays for it and just want to have it working. Let's hope for the best. Matt 2013

Re: [Users] NetApp plugin/package. Is this available or planned ?

2013-06-27 Thread Matt .
Hi Jon, Great to hear! Really great! Thanks. (now I hope to see it soon!) Cheers, Matt 2013/6/27 Benedict, Jon jon.bened...@netapp.com Hi Matt, It will always be free. We have set that precedence with the existing VSC integrations. jb -- *Jon Benedict *Technical Marketing

Re: [Users] too much debugging in ovirt-node

2013-06-28 Thread Matt .
I have also libvirt logs with about 10GB of space, annoying, needs to be fixed. 2013/6/28 Martin Kletzander mklet...@redhat.com On 06/26/2013 07:47 PM, Winfried de Heiden wrote: Hi all, Using ovirt-node-iso-2.6.1-20120228.fc18.iso (2012 seems to be a typo, must be 2013?) is logging

Re: [Users] Cannot connect via spice-html5. How to use noVnc?

2013-07-14 Thread Matt .
#Test_case_1_-_Websocket_Proxy_on_the_engine.27s_machine Because this would be a pain actually. Maybe we need to change the docs here a little bit after all. Cheers, Matt 2013/7/14 lofyer lof...@gmail.com On 2013/7/12 18:08, Frantisek Kobzik wrote: Hello, for running spice-html5 and novnc you also

Re: [Users] Limit migration bandwidth

2013-07-14 Thread Matt .
Hi Joop. What is your actual problem here ? I have seperated nics for: - Management - VM (Internal/LAN) - VM (Outside/WAN) - Storage Or are you putting everything over one pipe ? Cheers, Matt 2013/7/14 Joop jvdw...@xs4all.nl Thanks, that is it, problem solved. Joop -- Sent from my

Re: [Users] Cannot connect via spice-html5. How to use noVnc?

2013-07-16 Thread Matt .
I wonder what we are discussing here at the moment. Like The Foreman, it has a html5 Spice viewer, actually noVNC. This is what Ulteo has too but is unclear to enable it or install it on an existing enviroment at the moment. This is at least what I see. Cheers, Matt 2013/7/16 Frantisek

[Users] Registeri VDSM Host from HOSTS Commandline

2013-08-06 Thread Matt .
Hi All, I'm wondering if it's possible in some way to register a new installed host to the engine from the commandline of this host. The ovirt-node-iso seems to be capable of this, now this would be nice to have for the full installed hosts. I hope this can be done. Cheers, Matt

[Users] 503 error on Engine Login

2013-08-18 Thread Matt .
, anyone an idea ? Never seen it. Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] 503 error on Engine Login

2013-08-18 Thread Matt .
for ovirt-01.domain.local httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName 2013/8/18 Yedidyah Bar David d...@redhat.com *From: *Matt . yamakasi@gmail.com *To: *users users@ovirt.org *Sent: *Sunday, August 18, 2013 3:01:32 PM *Subject

Re: [Users] 503 error on Engine Login

2013-08-18 Thread Matt .
Solved, seems to be an issue in the hostsfile of the ovirt engine becaus of the fact that the DNS server was down as a it's a VM too. Thanks! 2013/8/18 Matt . yamakasi@gmail.com I have tried that and most of the time you get a qualified domainname issue, which is not always a problem

[Users] Remove running Vm's from host

2013-08-18 Thread Matt .
on. What would be a known and decent way to have your SPM not running VM's, is itpossible to remove them from the engine @ Host ? They are actually not running... Thanks! Cheers, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman

Re: [Users] Remove running Vm's from host

2013-08-18 Thread Matt .
not known [root@kvm-02 ~]# 2013/8/18 Omer Frenkel ofren...@redhat.com -- *From: *Matt . yamakasi@gmail.com *To: *users users@ovirt.org *Sent: *Sunday, August 18, 2013 5:04:21 PM *Subject: *[Users] Remove running Vm's from host Hi All, Something I have seen

Re: [Users] Remove running Vm's from host

2013-08-18 Thread Matt .
Also a DNS issue for the last error, so added the hostnames in the hosts file again and I get this now: Connection to kvm-02.domain.local:54321 refused 2013/8/18 Matt . yamakasi@gmail.com I get some errors on this one: # vdsClient 0 list table Traceback (most recent call last): File

Re: [Users] Remove running Vm's from host

2013-08-18 Thread Matt .
Still that odd bug that fills the vdsm.log... Working now again since vdsm didn't start 2013/8/18 Matt . yamakasi@gmail.com Also a DNS issue for the last error, so added the hostnames in the hosts file again and I get this now: Connection to kvm-02.domain.local:54321 refused 2013/8

[Users] /api/vms Rest API 500 ERROR After upgrade to 3.3

2013-09-30 Thread Matt .
Hi All, I am facing the following problem: After upgrading to 3.3 the REST API doesn't show the VM's anymore from (one) DC. https://bugzilla.redhat.com/show_bug.cgi?id=1011489 I made a bugreport for this but no status so far. Has anyone seen the same ? Cheers, Matt

[Users] column storage pool with storage domain.comment does not exist

2013-10-29 Thread Matt .
, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[Users] Cannot add Host. Host with the same address already exists.

2014-01-05 Thread Matt .
in the DB somewhere and it is, I see some NULL columns for that host because it's actually not really there anymore and stuff like statics are not updated. I need to clean this one out, how can I accomplish this without getting a dirty DB ? Thanks! Cheers, Matt

Re: [Users] Cannot add Host. Host with the same address already exists.

2014-01-05 Thread Matt .
Hi, Thanks, I saw this information indeed in the views and the tables you have me, I was not 100% sure if everything was in it. I need to check the logs later on, if I find something I will post it! Thanks! Cheers, Matt 2014/1/5 Gilad Chaplik gchap...@redhat.com Hi Matt, connect to DB

[ovirt-users] MaxVmNameLengthNonWindows not set right ?

2015-01-27 Thread Matt .
, Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] VDSM memory consumption

2015-03-09 Thread Matt .
Oh Sorry Dan, you are one of them ;) Nice to have you on this :) 2015-03-09 23:49 GMT+01:00 Matt . yamakasi@gmail.com: Hi, I also see this on the latest 3.5 version, I'm thinking about setting up a cronjob to restart vdsm every night. I cannot believe that people say they don't have

Re: [ovirt-users] VDSM memory consumption

2015-03-09 Thread Matt .
Hi, I also see this on the latest 3.5 version, I'm thinking about setting up a cronjob to restart vdsm every night. I cannot believe that people say they don't have this issue. Can someone of the devs dive in maybe ? Thanks! Matt 2015-03-09 23:29 GMT+01:00 Dan Kenigsberg dan...@redhat.com

Re: [ovirt-users] VDSM memory consumption

2015-03-10 Thread Matt .
NO! The fix that should have fixed it didn't change a thing... we lost track there as some devs were going to look at it. 2015-03-10 11:47 GMT+01:00 Dan Kenigsberg dan...@redhat.com: On Mon, Mar 09, 2015 at 11:49:01PM +0100, Matt . wrote: Hi, I also see this on the latest 3.5 version, I'm

Re: [ovirt-users] VDSM memory consumption

2015-03-26 Thread Matt .
Hi Daniel, Great! Thanks. I only see this issue happening on CentOS 7, Joop van de Wege also confirmed he didn't see it on CentOS 6. Cheers, Matt 2015-03-26 13:33 GMT+01:00 Daniel Helgenberger daniel.helgenber...@m-box.de: Hello Everyone, I did create the original BZ on this. In the mean

  1   2   3   4   >