Hi All!
I'm try to set up last ovirt version : ovirt-release42-pre.rpm
repository (because bug
https://bugzilla.redhat.com/show_bug.cgi?id=1637468 , for example -
it's not fixed in release42 stable)
Then, I install these (and many deps) rpms:
ovirt-hosted-engine-setup-2.2.30-1.el7.noarch
ov
07.11.2018 12:27, Mike Lykov пишет:
4. Gluster volumes are in strange state:
When i try to create volume (storage->volumes->new), press "add
bricks" - there is a similar drop-down box "Bricks Host" contains only
"ovirtnode" names, not "ovirtstor
Hi All
I'm try to set up last ovirt version : ovirt-release42-pre.rpm repository
Then, I install these (and many deps) rpms:
ovirt-hosted-engine-setup-2.2.30-1.el7.noarch
ovirt-engine-appliance-4.2-20181026.1.el7.noarch
vdsm-4.20.43-1.el7.x86_64
vdsm-gluster-4.20.43-1.el7.x86_64
vdsm-network-4.20
I may try.
On Thu, Nov 8, 2018 at 2:56 PM Mike Lykov wrote:
Hi All
I'm try to set up last ovirt version : ovirt-release42-pre.rpm repository
Then, I install these (and many deps) rpms:
ovirt-hosted-engine-setup-2.2.30-1.el7.noarch
ovirt-engine-appliance-4.2-20181026.1.el7.noarch
vdsm-
Hi all.
I'm testing oVirt (it's new to me also) and create some VM with
nearly-all-default parameters.
(ovirt 4.2.7, with last updates)
I create one disk for VM (via webui) :
General -> create -> new image with default interface virtio-scsi (boot,
50 Gb size)
resource allocation - virtio-scs
shows that first time creating/running
was successful, scsi controller doubled later.
I will send logs to your personal email.
VM created at 9 Nov 16:02
one scsi controller
First error encountered at 13 Nov 13:15 - multiple scsi controllers
On Thu, Nov 15, 2018 at 1:04 PM Mike Lykov <mailto:
18.11.2018 8:16, Shawn Weeks пишет:
Currently when LibgfApiSupported is enabled it looks like the startup
command for the VM has the Gluster hostname always set to the same host.
How does that work if that host is down? In my case GlusterFS has 3x
replication and distribution enabled but if the
19.11.2018 14:36, Hari Prasanth Loganathan пишет:
Hi Team,
Could someone let me know the difference between creating VM from clone
and template in oVirt?
It really looks the same.
I think you can create a "clone based on template" (independent from
template) or "thin machine" (dependent fro
Hi All!
I'm trying to configure network in VMs created from template, and see
strange behaviour from cloud-init.
cloud-init installed and enabled in template.
ver cloud-init-0.7.9-24.el7.centos.1.x86_64
guest Centos 7.5
ovirt 4.2.7 from ovirt-releases-42-pre repo
1. I use "run once" with initi
20.11.2018 15:30, Mike Lykov пишет:
DataSourceNotFoundException: Did not find any data source, searched
classes: (DataSourceNoCloudNet)
2018-11-20 13:53:24,194 - stages.py[DEBUG]: applying net config names
for {'version': 1, 'config': [{'subnets': [{'type
20.11.2018 15:30, Mike Lykov пишет:
"cloud-init used to use a "marker" file that it created on initial
execution. If that "marker" file existed it would not rerun on reboot. "
- are it not working in ovirt/this cloud-init version ?
new restart:
--
201
'eth0'
I have not tested it myself but it looks like a corollary of [2]
HTH
[1] https://cloudinit.readthedocs.io/en/0.7.9/topics/boot.html#generator
[2] https://cloudinit.readthedocs.io/en/0.7.9/topics/boot.html#local
[3] https://cloudinit.readthedocs.io/en/0.7.9/topics/boot.html#fi
29.11.2018 12:59, Simone Tiraboschi пишет:
* Read more about the oVirt 4.2.8 release highlights:
http://www.ovirt.org/release/4.2.8/
There is a broken link in section "Upgrade Hosted Engine"
current link points to https://www.ovirt.org/upgrade-guide/upgrade-guide/
real link https://www.ovirt
M runs?
If will need to change parameters user may use "Run Once" start with new
parameters - in this case a 'disabled' file may be ignored.
But what reason to finding a configuration while usual run at all?
--
BR, Mike
On Wed, Nov 28, 2018 at 10:12 AM Eitan Raviv &
14.12.2018 15:52, Martin Sivak пишет:
Hi,
> Host id is not set
This is an internal error report that should normally not happen. It
means the ovirt-ha-agent asked for a storage operation before it
registered itself with the broker. If this happens seldom then it looks
like a race condition.
I have a 4.2.7 setup hyperconverged, two deployed VM Engine images and i
have 20-30 second network outage. After some pinging to start engine on
host 1, then 2, then again 1 Engine image stuck at
"Probing EDD (edd=off to disable)... _"
as here: https://bugzilla.redhat.com/show_bug.cgi?id=156
21.12.2018 14:24, Mike Lykov пишет:
I have a 4.2.7 setup hyperconverged, two deployed VM Engine images and i
have 20-30 second network outage. After some pinging to start engine on
host 1, then 2, then again 1 Engine image stuck at
"Probing EDD (edd=off to disable)... _"
as h
24.12.2018 11:30, Mike Lykov пишет:
Host nodes (centos 7.5) named ovirtnode1,5,6. Timeouts (in ha agent) are
default. Sanlock are configured (as i think)
HE running on ovirtnode6, and spare HE deployed on ovirtnode1.
Fixed (as seems) by guestfish/xfs_repair method. It requires to zero xfs
25.12.2018 10:14, Mike Lykov пишет:
1. Why (when it cannot boot due to corruption) it NOT show anything at
all in console?
I can get to grub menu (if moving fast enough), but if I continue boot I
see a blinking cursor for many minutes and not more. Grub options not
contain any splash/quiet
14.02.2019 19:45, Jiří Sléžka пишет:
Hello,
we are using ovirt 4.2.8.2-1.el7.
One our user probably tried to preview taken snapshot but the task is
stucked and never finished. Also disk is locked.
I'm also have this problem.
I try to use openbaccus project for backup VMs, and all was good (ma
Hi all. I have a HCI setup, glusterfs 3.12, ovirt 4.2.7, 4 nodes
Yesterday I see 3 VMs detected by engine as "not responding" (it is marked as
HA VMs)
(it all located on ovirtnode1 server)
Two of them are restarted by engine on other nodes successfully, but one are
not. All get LOCALIZED messag
Hi All!
I'm using ovirt-release42-4.2.7.1-1.el7.noarch
centos-release-7-5.1804.5.el7.centos.x86_64
And HCI glusterfs deployment (no ceph).
And yesterday I wanted an add hosted engine deploy on some node.
It requires to enable maintenance mode, reinstall node with "hosted engine =
deploy" conf
01.03.2019 9:51, Sahina Bose пишет:
> Any errors in vdsm.log or gluster mount log for this volume?
>
I cannot find any.
Here is full logs from one node for that period:
https://yadi.sk/d/BzLBb8VGNEwidw
file name ovirtnode1-logs-260219.tar.gz
gluster, vdsm logs for all volumes
sanlock client st
23 matches
Mail list logo