[ovirt-users]Отн: HyperConverged Self-Hosted deployment fails

2019-01-19 Thread Strahil Nikolov
Thanks Simone, I will check the broker.I didn't specify the layout correctly - it's 'replica 3 arbiter 1' which was OK last time I used this layout. Best Regards,Strahil Nikolov От: Simone Tiraboschi До: hunter86bg Копие: users Изпратен: събота, 19 януари 2019 г. 17:42 Тема: Re

[ovirt-users]Отн: HyperConverged Self-Hosted deployment fails

2019-01-19 Thread Strahil Nikolov
]: s9 add_lockspace fail result -223 Can someone guide me how to go further ? Can debug be enabled for sanlock ? Best Regards,Strahil Nikolov От: Strahil Nikolov До: Simone Tiraboschi Копие: users Изпратен: събота, 19 януари 2019 г. 17:54 Тема: Отн: [ovirt-users] HyperConverged Self-Host

[ovirt-users]Отн: HyperConverged Self-Hosted deployment fails

2019-01-19 Thread Strahil Nikolov
read. Best Regards,Strahil Nikolov От: Strahil Nikolov До: Simone Tiraboschi Копие: users Изпратен: събота, 19 януари 2019 г. 23:34 Тема: Отн: [ovirt-users] HyperConverged Self-Hosted deployment fails Hello All, it seems that the ovirt-ha-broker has some problems:Thread-8::DEBUG::2019

[ovirt-users] Re: Sanlock volume corrupted on deployment

2019-01-28 Thread Strahil Nikolov
Hi Simone, I will reinstall the nodes and will provide an update. Best Regards,Strahil Nikolov On Sat, Jan 26, 2019 at 5:13 PM Strahil wrote: Hey guys, I have noticed that with 4.2.8 the sanlock issue (during deployment) is still not fixed.Am I the only one with bad luck or there is something

[ovirt-users] Re: Vm status not update after update

2019-04-02 Thread Strahil Nikolov
I think I already met a solution in the mail lists. Can you check and apply the fix mentioned there ? Best Regards,Strahil Nikolov В вторник, 2 април 2019 г., 14:39:10 ч. Гринуич+3, Marcelo Leandro написа: Hi, After update my hosts to ovirt node 4.3.2 with vdsm  version  vdsm-4.30.11

[ovirt-users] Re: Controller recomandation - LSI2008/9265

2019-04-05 Thread Strahil Nikolov
At least , based on spec  I would prefer LSI9265-8i as it supports hot spare, SSD support , cache and set it up in Raid 0 - but only in a replica 3 or replica 3 arbiter 1 volumes. Best Regards,Strahil Nikolov В петък, 5 април 2019 г., 9:20:57 ч. Гринуич+3, Leo David написа: Thank

[ovirt-users] Re: Hosted-Engine constantly dies

2019-04-05 Thread Strahil Nikolov
Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community

[ovirt-users] oVirt 4.3.2 Importing VMs from a detached domain not keeping cluster info

2019-04-05 Thread Strahil Nikolov
. Most probably this is not a supported activity, but can someone clarify it ? Thanks in advance. Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https

[ovirt-users] Re: Hosted-Engine constantly dies

2019-04-05 Thread Strahil Nikolov
er dev teams. Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community

[ovirt-users] oVirt 4.3.2 Disk extended broken (UI)

2019-04-05 Thread Strahil Nikolov
-f8db501102faimage: c525f67d-92ac-4f36-a0ef-f8db501102fafile format: rawvirtual size: 180G (193273528320 bytes)disk size: 71G Attaching some UI screen shots. Note: I have extended the disk via the UI by selecting 40GB (old value in UI -> 100GB). Best Regards,Strahil Niko

[ovirt-users] Hosted-Engine constantly dies

2019-03-31 Thread Strahil Nikolov
Any hints are appreciated and thanks in advance. Best Regards,Strahil Nikolov hosted-engine-crash Description: Binary data ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/si

[ovirt-users] Re: Hosted-Engine constantly dies

2019-04-01 Thread Strahil Nikolov
Hi Simone, I am attaching the gluster logs from ovirt1.I hope you see something I missed. Best Regards,Strahil Nikolov <> ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: Hosted-Engine constantly dies

2019-04-01 Thread Strahil Nikolov
Hi Simone, >Sorry, it looks empty. Sadly it's true. This one should be OK. Best Regards,Strahil Nikolov <> ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt

[ovirt-users] Re: Ovirt 4.3 RC missing glusterfs-gnfs

2019-02-20 Thread Strahil Nikolov
el7.x86_64 (ovirt-4.3-centos-gluster5)               glusterfs-client-xlators(x86-64) = 5.2-1.el7 You could try using --skip-broken to work around the problem Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an em

[ovirt-users] Re: Are people still experiencing issues with GlusterFS on 4.3x?

2019-03-17 Thread Strahil Nikolov
w releases and to be prepared before deploying on my lab. Best Regards,Strahil Nikolov В събота, 16 март 2019 г., 15:35:05 ч. Гринуич+2, Nir Soffer написа: On Fri, Mar 15, 2019, 15:16 Sandro Bonazzola ha scritto: Hi, something that I’m seeing in the vdsm.log, that I think is glust

[ovirt-users] Re: Hosted Engine I/O scheduler

2019-03-18 Thread Strahil Nikolov
creation) START: 2019-03-18 08:52:02.xxxAdding a disk to VM (initial creation) COMPLETED: 2019-03-18 08:52:20.xxx Of course the results are inconclusive, as I have tested only once - but I feel the engine more responsive. Best Regards,Strahil Nikolov В неделя, 17 март 2019 г., 18:30:23 ч

[ovirt-users] Ovirt 4.3.1 cannto set host to maintenance

2019-03-12 Thread Strahil Nikolov
. | | | Imgur | | | | | | | | | | | Imgur Imgur Post with 0 votes and 0 views. | | | How can I recover from that situation? Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-12 Thread Strahil Nikolov
mestamp : 14458 Extra metadata (valid at timestamp):     metadata_parse_version=1     metadata_feature_version=1     timestamp=14458 (Tue Mar 12 10:47:41 2019)     host-id=2     score=3400     vm_conf_refresh_time=14458 (Tue Mar 12 10:47:41 2019)     conf_on_shared_

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-13 Thread Strahil Nikolov
s/vdsm/common/function.py", line 94, in wrapper     return func(inst, *args, **kwargs)   File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3743, in defineXML     if ret is None:raise libvirtError('virDomainDefineXML() failed', conn=self) libvirtError: XML error: No PCI buses avail

[ovirt-users] Re: Ovirt 4.3.1 cannto set host to maintenance

2019-03-13 Thread Strahil Nikolov
Regards,Strahil Nikolov В сряда, 13 март 2019 г., 11:08:57 ч. Гринуич+2, Simone Tiraboschi написа: On Wed, Mar 13, 2019 at 9:57 AM Strahil Nikolov wrote: Hi Simone,Nir, >Adding also Nir on this, the whole sequence is tracked here: >I'd suggest to check ovirt-imageio and vds

[ovirt-users] Re: Ovirt 4.3.1 cannto set host to maintenance

2019-03-13 Thread Strahil Nikolov
2-6ecc-4901-8cec-8e39f3d69cb0/9460fc4b-54f3-48e3-b7b6-da962321ecf4 -rw-r--r-- 0/0 138 2019-03-12 08:06 info.json -rw-r--r-- 0/0   21164 2019-03-12 08:06 8474ae07-f172-4a20-b516-375c73903df7.ovf -rw-r--r-- 0/0  72 2019-03-12 08:06 metadata.json Best Regards,Str

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-07 Thread Strahil Nikolov
-id=2     score=3400     vm_conf_refresh_time=3926 (Thu Mar  7 15:34:45 2019)     conf_on_shared_storage=True     maintenance=False     state=GlobalMaintenance     stopped=False !! Cluster is in GLOBAL MAINTENANCE mode !! [root@ovirt1 ovirt-hosted-engine-ha]# virsh list --all  Id  

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-07 Thread Strahil Nikolov
that ? Maybe wipe and restart the ovirt-ha-broker and agent ? Also, I think this happened when I was upgrading ovirt1 (last in the gluster cluster) from 4.3.0 to 4.3.1 . The engine got restarted , because I forgot to enable the global maintenance. Best Regards,Strahil Nikolov В сряда, 6 март

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-09 Thread Strahil Nikolov
the configurations to the right places ... maybe this is way too optimistic. At least I have learned a lot for oVirt. Best Regards,Strahil Nikolov В четвъртък, 7 март 2019 г., 17:55:12 ч. Гринуич+2, Simone Tiraboschi написа: On Thu, Mar 7, 2019 at 2:54 PM Strahil Nikolov wrote

[ovirt-users] Re: Migrate HE beetwen hosts failed.

2019-03-18 Thread Strahil Nikolov
CPUs ?usually the older the CPU type on the VM - the higher compatibility it has , but performance drops - so keep that in mind. Best Regards,Strahil Nikolov В понеделник, 18 март 2019 г., 8:36:01 ч. Гринуич+2, k...@intercom.pro написа: Hi all. I have oVirt 4.3.1 and 3 node hosts

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-18 Thread Strahil Nikolov
-2deb52357304 Once you create your link , start it again. 6. Wait till OVF is fixed (takes more than the settings in the engine :) ) Good Luck! Best Regards,Strahil Nikolov В понеделник, 18 март 2019 г., 12:57:30 ч. Гринуич+2, Николаев Алексей написа: Hi all! I have a very similar

[ovirt-users] Re: Ovirt 4.3.1 cannto set host to maintenance

2019-03-12 Thread Strahil Nikolov
key: '441abdc8-6cb1-49a4-903f-a1ec0ed88429DISK' , but lock does not exist For the Cancelled event - I think it shouldn't go into this "Failed" state as the user has cancelled the action.For the second - i have no explanation. Now comes the question - what should be done in order to

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-12 Thread Strahil Nikolov
in /var/run/ovirt-hosted-engine-ha/vm.conf won't work ? I will keep the HostedEngine's xml - so I can redefine if needed. Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org

[ovirt-users] Re: iSCSI domain creation ; nothing happens

2019-03-12 Thread Strahil Nikolov
Do you have the iscsi-initiator-utils rpm installed ? Best Regards,Strahil Nikolov В вторник, 12 март 2019 г., 15:46:36 ч. Гринуич+2, Guillaume Pavese написа: My setup : oVirt 4.3.1 HC on Centos 7.6, everything up2dateI try to create a new iSCSI Domain. It's a new LUN/Target created

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-15 Thread Strahil Nikolov
Ok, I have managed to recover again and no issues are detected this time.I guess this case is quite rare and nobody has experienced that. Best Regards,Strahil Nikolov В сряда, 13 март 2019 г., 13:03:38 ч. Гринуич+2, Strahil Nikolov написа: Dear Simone, it seems that there is some

[ovirt-users] oVirt 4.3.1 - Remove VM greyed out

2019-03-15 Thread Strahil Nikolov
Hi Community, I have the following problem.A VM was created based on template and after poweroff/shutdown it cannot be removed - the button is greyed-out. Anyone who got such an issue ?Any hint where to look for ? Best Regards,Strahil Nikolov ___ Users

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-09 Thread Strahil Nikolov
you hint me how to recover the 2 OVF tars now ? Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code

[ovirt-users] oVirt 4.3.2 - Cannot update Host via UI

2019-03-22 Thread Strahil Nikolov
meaningful. Any hint where to look for ? Thanks in advance. Best Regards,Strahil Nikolov engine-log-without-Gluster Description: Binary data ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement

[ovirt-users] Re: Ovirt self-hosted engine won't come up

2019-02-14 Thread Strahil Nikolov
/ovirt-hosted-engine/virsh_auth.conf resume HostedEngine Best Regards,Strahil Nikolov В четвъртък, 14 февруари 2019 г., 19:39:35 ч. Гринуич+2, joshuao...@gmail.com написа: It appears the engine is down entirely now and hosted-engine --vm-start doesn't appear to change anything. Engine

[ovirt-users] Re: Unable to deatch/remove ISO DOMAIN

2019-01-25 Thread Strahil Nikolov
'; Best Regards,Strahil Nikolov В петък, 25 януари 2019 г., 11:04:01 ч. Гринуич+2, Martin Humaj написа: Hi StrahilI have tried to use the same ip and nfs export to replace the original, did not work properly. If you can guide me how to do it in engine DB i would appreciate

[ovirt-users] Re: Ovirt 4.2.8 allows to remove a gluster volume without detaching the storage domain

2019-01-25 Thread Strahil Nikolov
Hey Community, where can I report this one ? Best Regards,Strahil Nikolov В четвъртък, 24 януари 2019 г., 19:25:37 ч. Гринуич+2, Strahil Nikolov написа: Hello Community, As I'm still experimenting with my ovirt lab , I have managed somehow to remove my gluster volume ('gluster volume

[ovirt-users] Re: Sanlock volume corrupted on deployment

2019-01-30 Thread Strahil Nikolov
) [3fd826e] EVENT_ID: GLUSTER_COMMAND_FAILED(4,035), Gluster command [] failed on server . Any hint how to proceed further ? Best Regards,Strahil Nikolov В вторник, 29 януари 2019 г., 14:01:17 ч. Гринуич+2, Strahil написа: Dear Nir, According to redhat solution 1179163 'add_locksp

[ovirt-users] Re: Deploying single instance - error

2019-01-30 Thread Strahil Nikolov
Hi All, I have managed to fix this by reinstalling gdeploy package. Yet, it still asks for "Disckount" section - but as the fix was not rolled for CentOS yet - this is expected. Best Regards,Strahil Nikolov On Thu, Jan 31, 2019 at 8:01 AM Strahil Nikolov wrote: Hey Guys/Gal

[ovirt-users] Re: Deploying single instance - error

2019-01-30 Thread Strahil Nikolov
-2.0.8-1.el7.noarch Note: This is a fresh install. Best Regards, Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code

[ovirt-users] Re: But in the web interface?

2019-02-05 Thread Strahil Nikolov
Dear Hetz, I have opened a bug for that : 1662047 – [UI] 2 dashboard icons after upgrade | | | | 1662047 – [UI] 2 dashboard icons after upgrade | | | You can check the workaround described there. best Regards,Strahil Nikolov ___ Users

[ovirt-users] Re: Ovirt 4.3 RC missing glusterfs-gnfs

2019-02-05 Thread Strahil Nikolov
this client registered? As you might have noticed there is no gluster-gnfs from repository ovirt-4.3-centos-gluster5. Best Regards,Strahil Nikolov [root@ovirt2 yum.repos.d]# yum update Loaded plugins: enabled_repos_upload, fastestmirror, package_upload, product-id, search-disabled-repos

[ovirt-users] Re: ovirt-node 4.2 iso - hyperconverged wizard doesn't write gdeployConfig settings

2019-02-05 Thread Strahil Nikolov
.service.d/99-cpu.conf [Service] CPUAccounting=yes Slice=glusterfs.slice Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/priva

[ovirt-users] Ovirt 4.2.8 allows to remove a gluster volume without detaching the storage domain

2019-01-24 Thread Strahil Nikolov
. Create a storage domain of it3. Go to Volumes and select the name of the volume4. Press remove and confirm . The tasks fails , but the volume is now gone in gluster . I guess , I have to do some cleanup in the DB in order to fix that. Best Regards,Strahil Nikolov

[ovirt-users] Re: [Gluster-users] Gluster snapshot fails

2019-04-12 Thread Strahil Nikolov
unt] Where=/gluster_bricks/isos [Install] WantedBy=multi-user.target Best Regards,Strahil Nikolov В петък, 12 април 2019 г., 4:12:31 ч. Гринуич-4, Strahil Nikolov написа: Hello All, I have tried to enable debug and see the reason for the issue. Here is the relevant glusterd.log: [2019-0

[ovirt-users] Re: [Gluster-users] Gluster snapshot fails

2019-04-12 Thread Strahil Nikolov
g "systemd-1" as a device and tries to check if it's a thin LV.Where should I open a bug for that ? P.S.: Adding oVirt User list. Best Regards,Strahil Nikolov В четвъртък, 11 април 2019 г., 4:00:31 ч. Гринуич-4, Strahil Nikolov написа: Hi Rafi, thanks for your update.

[ovirt-users] oVirt 4.3.2 missing/wrong status of VM

2019-04-14 Thread Strahil Nikolov
As I couldn't find the exact mail thread, I'm attaching my  /usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py which fixes the missing/wrong status of VMs. You will need to restart vdsmd (I'm not sure how safe is that with running guests) in order to start working. Best Regards,Strahil

[ovirt-users] Re: Tuning Gluster Writes

2019-04-14 Thread Strahil Nikolov
Best Regards,Strahil Nikolov В неделя, 14 април 2019 г., 19:06:07 ч. Гринуич+3, Alex McWhirter написа: On 2019-04-13 03:15, Strahil wrote: > Hi, > > What is your dirty  cache settings on the gluster servers  ? > > Best Regards, > Strahil NikolovOn Apr 13, 2019 00:44, Al

[ovirt-users] Re: [Gluster-users] Gluster snapshot fails

2019-04-12 Thread Strahil Nikolov
I hope this is the last update on the issue -> opened a bug https://bugzilla.redhat.com/show_bug.cgi?id=1699309 Best regards,Strahil Nikolov В петък, 12 април 2019 г., 7:32:41 ч. Гринуич-4, Strahil Nikolov написа: Hi All, I have tested gluster snapshot without systemd.automo

[ovirt-users] Re: [Gluster-users] Gluster snapshot fails

2019-04-12 Thread Strahil Nikolov
    Status    : Stopped Best Regards,Strahil Nikolov В петък, 12 април 2019 г., 4:32:18 ч. Гринуич-4, Strahil Nikolov написа: Hello All, it seems that "systemd-1" is from the automount unit , and not from the systemd unit. [root@ovirt1 system]# sys

[ovirt-users] Re: Are people still experiencing issues with GlusterFS on 4.3x?

2019-03-15 Thread Strahil Nikolov
F_STORE (0 bytes), issues with gluster , out-of-sync network - so for me 4.3.0 & 4.3.0 are quite unstable. Is there a convention indicating stability ? Is 4.3.xxx means unstable , while 4.2.yyy means stable ? Best Regards,Strahil Nikolov ___ Users mail

[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent

2019-03-15 Thread Strahil Nikolov
On Fri, Mar 15, 2019 at 8:12 AM Strahil Nikolov wrote: Ok, I have managed to recover again and no issues are detected this time.I guess this case is quite rare and nobody has experienced that. >Hi,>can you please explain how you fixed it? I have set again to global maintenance, d

[ovirt-users] Re: oVirt 4.3.1 - Remove VM greyed out

2019-03-15 Thread Strahil Nikolov
Please ignore this one - I'm just too stupid and i didn't realize that the Deletion Protection was enabled. Strahil В петък, 15 март 2019 г., 11:27:08 ч. Гринуич+2, Strahil Nikolov написа: Hi Community, I have the following problem.A VM was created based on template and after

[ovirt-users] Re: [ovirt-announce] Re: [ANN] oVirt 4.3.4 First Release Candidate is now available

2019-05-16 Thread Strahil Nikolov
If someone else already opened - please ping me to mark this one as duplicate. Best Regards,Strahil Nikolov В четвъртък, 16 май 2019 г., 22:27:01 ч. Гринуич+3, Darrell Budic написа: On May 16, 2019, at 1:41 PM, Nir Soffer wrote: On Thu, May 16, 2019 at 8:38 PM Darrell Budic wrote: I

[ovirt-users] Re: [ovirt-announce] Re: [ANN] oVirt 4.3.4 First Release Candidate is now available

2019-05-16 Thread Strahil Nikolov
>This may be another issue. This command works only for storage with 512 bytes >sector size. >Hyperconverge systems may use VDO, and it must be configured in compatibility >mode to >support>512 bytes sector size. >I'm not sure how this is configured but Sahina should know. >Nir I do use VDO.

[ovirt-users] Re: [ovirt-announce] Re: [ANN] oVirt 4.3.4 First Release Candidate is now available

2019-05-16 Thread Strahil Nikolov
of=testfile bs=4096 count=1 oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB) copied, 0.00295952 s, 1.4 MB/s Most probably the 2 cases are different. Best Regards,Strahil Nikolov В четвъртък, 16 май 2019 г., 22:17:23 ч. Гринуич+3, Nir Soffer написа: On Thu, May 16, 2019

[ovirt-users] Re: Administration Portal "Uncaught Exception" Issue

2019-05-27 Thread Strahil Nikolov
Well, in the older versions I have similar to your issue which was resolved by updating to the latest at that time version. Best Regards,Strahil Nikolov В понеделник, 27 май 2019 г., 23:31:13 ч. Гринуич+3, Zachary Winter написа: Yes, I am planning to do so.  Is this fixed

[ovirt-users] Re: Administration Portal "Uncaught Exception" Issue

2019-05-27 Thread Strahil Nikolov
Are you considering updating to 4.3.7 ? Best Regards,Strahil Nikolov В понеделник, 27 май 2019 г., 20:51:13 ч. Гринуич+3, Zachary Winter написа: Thank you for the log location.  With apologies, it happens "consistently" on some pages but not constantly everywhere.  It

[ovirt-users]Re: Bond Mode 1 (Active-Backup),vm unreachable for minutes when bond link change

2019-05-25 Thread Strahil Nikolov
When I unplug >Currently Active Slave eno1,bond link change to eno2 as expected but vm >become unreachable until external physical switch MAC Table ageing time >expired.It seems that vm doesn't sent gratuitous ARP when bond link >change. How can I fix if? > >vm os is Centos 7.5 >ovir

[ovirt-users] oVirt 4.3.4 RC1 to RC2 - Dashboard error / VM/Host/Gluster Volumes OK

2019-05-26 Thread Strahil Nikolov
and Hosts + Gluster Volumes arep roperly detected (yet all my VMs are powered off since before RC2 upgrade). Any clues that might help you solve that before I roll back (I have a gluster snapshot on 4.3.3-7) ? Best Regards,Strahil Nikolov ___ Users

[ovirt-users] Re: Single instance scaleup.

2019-05-26 Thread Strahil Nikolov
,Strahil Nikolov В неделя, 26 май 2019 г., 15:16:18 ч. Гринуич+3, Leo David написа: Thank you Strahil,The engine and ssd-samsung are distributed...So these are the ones that I need to have replicated accross new nodes.I am not very sure about the procedure to accomplish this.Thanks, Leo

[ovirt-users] Re: Unable to find OVF_STORE after recovery / upgrade

2019-05-25 Thread Strahil Nikolov
Regards,Strahil Nikolov В вторник, 14 май 2019 г., 23:48:17 ч. Гринуич+3, Sam Cappello написа: Hi, so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0.  i screwed up

[ovirt-users] Re: Feature Request: oVirt to warn when VDO is getting full

2019-06-04 Thread Strahil Nikolov
Hi Sahina, thanks for your response .Currently I'm below 70% usage , so I guess it's working properly.Actually the VDO is the brick for the gluster.I didn't know we have such feature - this will make everyone's life way better. Best Regards,Strahil Nikolov В вторник, 4 юни 2019 г., 6:19

[ovirt-users] fence_rhevm not working with ovirt 4.3.4.2-1.el7 (RC2)

2019-06-04 Thread Strahil Nikolov
Hello Community, I'm sending this e-mail just to notify you that I have raised a bug for the fence_rhevm (RHEL 8) which has problems parsing the response from the oVirt's API. The bug is : 1717179 – fence_rhevm cannot obtain plug status on oVirt 4.3.4.2-1.el7 (RC2) | | | | 1717179 –

[ovirt-users] Re: possible to clear vm started under different name warning in gui?

2019-05-31 Thread Strahil Nikolov
Have you tried to power off and then power on the VM ? Best Regards,Strahil Nikolov В петък, 31 май 2019 г., 8:59:54 ч. Гринуич-4, Jayme написа: When a VM is renamed a warning in engine gui appears with an exclamation point stating "vm was started with a different

[ovirt-users] Re: change he vm memoy size

2019-05-30 Thread Strahil Nikolov
Hi Alexey, better open a bug for that. If the Description is updated, but after a reboot the engine is still using the old values - it seems that it is a bug. Best Regards,Strahil Nikolov В четвъртък, 30 май 2019 г., 9:26:51 ч. Гринуич-4, Valkov, Alexey написа: Indeed, after edit HE

[ovirt-users] Re: [ANN] oVirt 4.3.4 Third Release Candidate is now available

2019-05-30 Thread Strahil Nikolov
is time "Thin Provisioned" is working as expected: [root@ovirt1 948f106c-7bd6-49f1-b88f-30ac8c408d72]# qemu-img info fc230fd5-9b07-46be-88c2-937a3eeb01aa image: fc230fd5-9b07-46be-88c2-937a3eeb01aa file format: raw virtual size: 1.0G (1073741824 bytes) disk size: 0 Best Regards,Strahil N

[ovirt-users] Re: [ANN] oVirt 4.3.4 Fourth Release Candidate is now available

2019-06-06 Thread Strahil Nikolov
nd you can keep that in mind.For details , check  1693998 – [Tracker] Rebase on Gluster 6 | | | | 1693998 – [Tracker] Rebase on Gluster 6 | | | I can't find any other issues in RC4. Maybe someone with gluster v5 can check their "Advanced Details" and confirm they are OK.

[ovirt-users] Re: Replace bad Host from a 9 Node hyperconverged setup 4.3.3

2019-06-06 Thread Strahil Nikolov
Have you tried with "Force remove" tick ? Best Regards,Strahil Nikolov В четвъртък, 6 юни 2019 г., 21:47:20 ч. Гринуич+3, Adrian Quintero написа: I tried removing the bad host but running into the following issue , any idea? Operation Canceled Error while executing actio

[ovirt-users] Re: oVirt 4.3.4 RC1 to RC2 - Dashboard error / VM/Host/Gluster Volumes OK

2019-05-27 Thread Strahil Nikolov
-to-RC2 - Google Drive | | | I hope this one helps for finding the reason for the DWH failiure. Can you hint me what will happen if i purge the DWH data via the setup utility ?What kind of data will be lost, as my VMs, storage and network settings seem to be OK ? Best Regards,Strahil Nikolov

[ovirt-users] Re: iso files

2019-06-24 Thread Strahil Nikolov
Iso domains are deprecated. You can upload an ISO to a data domain via UI (and maybe API). Best Regards,Strahil Nikolov В понеделник, 24 юни 2019 г., 16:33:57 ч. Гринуич+3, написа: Hi, is possible to install a VM without an ISO domain? for version 4.3.4.3 ? Thanks -- Jose

[ovirt-users] Re: RFE: HostedEngine to use boom by default

2019-06-12 Thread Strahil Nikolov
another nice feature - gluster snapshots which I also use. If the approach in https://bugzilla.redhat.com/1670788 | | | | 1670788 – [RFE] Enable Storage Live Migration for Hosted Engine from wit... | | | is easy to implement - then BOOM won't be needed. Best Regards,Strahil Nikolov

[ovirt-users] Re: Ovirt hiperconverged setup error

2019-06-12 Thread Strahil Nikolov
Command run is "dig' which tries to resolve the hostname of each server.Do you have a DNS resolver properly configured ? Best Regards,Strahil Nikolov В сряда, 12 юни 2019 г., 3:59:14 ч. Гринуич-4, PS Kazi написа: ovirt Node version 4.3.3.1 I am trying to configure 3 node Gl

[ovirt-users] Re: Can't import some VMs after storage domain detach and reattach to new datacenter.

2019-06-23 Thread Strahil Nikolov
I have seen similar situation , when a VM had one disk on 1 domain and 2nd disk on another storage domain. Are you sure that all disks of the problematic VMs were moved to the iSCSI storage domain ? Best Regards,Strahil Nikolov В неделя, 23 юни 2019 г., 11:28:56 ч. Гринуич+3, m black

[ovirt-users] Re: Issues when Creating a Gluster Brick with Cache

2019-06-24 Thread Strahil Nikolov
Did you blacklist in /etc/multipath.conf all local disks ?In other words, when you run 'lsblk' do you see hte disk to have a child device (usually the wwid) ? Best Regards,Strahil Nikolov В понеделник, 24 юни 2019 г., 2:08:37 ч. Гринуич-4, Robert Crawford написа: Hey Everyone, When

[ovirt-users] RFE: HostedEngine to use boom by default

2019-06-11 Thread Strahil Nikolov
Hello All, I have seen a lot of cases where the HostedEngine gets corrupted/broken and beyond repair. I think that BOOM is a good option for our HostedEngine appliances due to the fact that it supports booting from LVM snapshots and thus being able to easily recover after upgrades or other

[ovirt-users] Re: Replace bad Host from a 9 Node hyperconverged setup 4.3.3

2019-06-11 Thread Strahil Nikolov
ve started playing with it when I deployed my lab. Best Regards,Strahil Nikolov Strahil, Looking at yoursuggestions I think I need to provide a bit more info on my currentsetup. - I have 9 hosts in total - I have 5 storage domains: - hosted_storage (D

[ovirt-users] Re: VM Disk Performance metrics?

2019-06-11 Thread Strahil Nikolov
+1 vote from me. Best Regards,Strahil Nikolov В вторник, 11 юни 2019 г., 18:54:54 ч. Гринуич+3, Wesley Stewart написа: Is there any way to get ovirt disk performance metrics into the web interface?  It would be nice to see some type of IOPs data, so we can see which VMs are hitting

[ovirt-users] HostedEngine migration from ovirt1:/engine to gluster1:/engine (new ip)

2019-05-13 Thread Strahil Nikolov
nd mount options of "backup-volfile-servers=gluster2:ovirt3". Should I edit the DB ? P.S.: My google skills did not show any results on this topic and thus I'm raising it to the mail list.Thanks in advance. Best Regards,Strahil Nikolov ___ Use

[ovirt-users] Re: HostedEngine migration from ovirt1:/engine to gluster1:/engine (new ip)

2019-05-13 Thread Strahil Nikolov
ine. I'm avoiding the restore, as I cannot find a dummy-style instruction for restore and with my luck - I will definately hit a wall. In my case this is the final piece left and DB manipulation is far easier . Of course , I wouldn't manipulate the DB on a production site - but for a lab is

[ovirt-users] Re: [ovirt-announce] Re: [ANN] oVirt 4.3.4 First Release Candidate is now available

2019-05-19 Thread Strahil Nikolov
) we didn't have that ?I'm using storage that is faster than network and reading from local brick gives very high read speed. Best Regards,Strahil Nikolov В неделя, 19 май 2019 г., 9:47:27 ч. Гринуич+3, Strahil написа: On this one https://access.redhat.com/documentation/en-us

[ovirt-users] Re: oVirt upgrade version from 4.2 to 4.3

2019-05-20 Thread Strahil Nikolov
No need, I already have the number -> https://bugzilla.redhat.com/show_bug.cgi?id=1704782 I have just mentioned it ,as the RC1 for 4.3.4 still doesn't have the fix. Best Regards,Strahil Nikolov В понеделник, 20 май 2019 г., 3:00:12 ч. Гринуич-4, Sahina Bose написа: On Sun, May

[ovirt-users] Re: oVirt node loses gluster volume UUID after reboot, goes to emergency mode every time I reboot.

2019-05-21 Thread Strahil Nikolov
Do you use VDO ?If yes, consider setting up systemd ".mount" units, as this is the only way to setup dependencies. Best Regards,Strahil Nikolov В вторник, 21 май 2019 г., 22:44:06 ч. Гринуич+3, mich...@wanderingmad.com написа: I'm sorry, i'm still working on my linux knowl

[ovirt-users] Re: Dropped RX Packets

2019-05-16 Thread Strahil Nikolov
link" on the Guest ? Best Regards,Strahil Nikolov В четвъртък, 16 май 2019 г., 9:19:57 ч. Гринуич-4, Magnus Isaksson написа: Hello all! I'm having quite some trouble with VMs that have a large amount of dropped packets on RX. This, plus customers complain about short dropped connections, f

[ovirt-users] Fw: ovirt 4.3.3.7 cannot create a gluster storage domain

2019-05-16 Thread Strahil Nikolov
MB/s Best Regards,Strahil Nikolov - Препратено съобщение - От: Strahil Nikolov До: Users Изпратено: четвъртък, 16 май 2019 г., 5:56:44 ч. Гринуич-4Тема: ovirt 4.3.3.7 cannot create a gluster storage domain Hey guys, I have recently updated (yesterday) my platform to latest

[ovirt-users] Re: ovirt 4.3.3.7 cannot create a gluster storage domain

2019-05-16 Thread Strahil Nikolov
Due to the issue with dom_md/ids not getting in sync and always pending heal on ovirt2/gluster2 & ovirt3 Best Regards,Strahil Nikolov В четвъртък, 16 май 2019 г., 6:08:44 ч. Гринуич-4, Andreas Elvers написа: Why  did you move to gluster v6? For the kicks? :-) The devs are curre

[ovirt-users] ovirt 4.3.3.7 cannot create a gluster storage domain

2019-05-16 Thread Strahil Nikolov
s, 115 MB/s 250+0 records in 250+0 records out 1048576000 bytes (1.0 GB) copied, 9.08347 s, 115 MB/s [root@ovirt1 mnt]#  /usr/bin/dd iflag=fullblock of=file oflag=direct,seek_bytes seek=1048576 bs=256512 count=1 conv=notrunc,nocreat,fsync status=progress ^C0+0 record

[ovirt-users] ovirt 4.3.3 SELINUX issue

2019-05-15 Thread Strahil Nikolov
ack either from a rescue DVD or from the running 'enforcing=0' system. Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-polic

[ovirt-users] Re: Change host names/IPs

2019-05-15 Thread Strahil Nikolov
I think you need to :1. Set a host into maintenance2. Uninstall3. Remove the host (if HostedEngine is running there) 4. Change the hostname & IPs5. Add the host6. Install (if HstedEngine will be running there) Best Regards,Strahil Nikolov В вторник, 14 май 2019 г., 18:05:35 ч. Грину

[ovirt-users] Re: oVirt Open Source Backup solution?

2019-05-14 Thread Strahil Nikolov
In such case ,you use the same approach for the VM in whole - lock + snapshot on oVirt + unlock.This way you keep OS + app backup in one place , which has it's own Pluses and Minuses. Best Regards,Strahil Nikolov В вторник, 14 май 2019 г., 6:40:56 ч. Гринуич-4, Derek Atkins написа

[ovirt-users] Re: Is teamd supported on 4.3?

2019-05-14 Thread Strahil Nikolov
I'm still implementing the change ,so I'm not sure. By the way, as a workaround we can use vlan interfaces , right ? Best Regards,Strahil Nikolov В вторник, 14 май 2019 г., 6:46:06 ч. Гринуич-4, Dominik Holler написа: On Tue, 14 May 2019 13:33:30 +0300 Strahil wrote: > I'm us

[ovirt-users] Re: Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

2019-05-20 Thread Strahil Nikolov
not needed for local storage ;) Best Regards,Strahil Nikolov В понеделник, 20 май 2019 г., 19:31:04 ч. Гринуич+3, Adrian Quintero написа: Sahina,Yesterday I started with a fresh install, I completely wiped clean all the disks, recreated the arrays from within my controller of our DL3

[ovirt-users] Re: Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

2019-05-20 Thread Strahil Nikolov
Hey Sahina, it seems that almost all of my devices are locked - just like Fred's.What exactly does it mean - I don't have any issues with my bricks/storage domains. Best Regards,Strahil Nikolov В понеделник, 20 май 2019 г., 14:56:11 ч. Гринуич+3, Sahina Bose написа: To scale existing

[ovirt-users] Re: [ovirt-announce] Re: [ANN] oVirt 4.3.4 First Release Candidate is now available

2019-05-20 Thread Strahil Nikolov
I got confused so far.What is best for oVirt ?remote-dio off or on ?My latest gluster volumes were set to 'off' while the older ones are 'on'. Best Regards,Strahil Nikolov В понеделник, 20 май 2019 г., 23:42:09 ч. Гринуич+3, Darrell Budic написа: Wow, I think Strahil and i both hit

[ovirt-users] ovirt 4.3.3 Disk for New VM is always Preallocated

2019-04-29 Thread Strahil Nikolov
- Allocation Policy is set to "Preallocation" Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Condu

[ovirt-users] Re: ovirt 4.3.3 cannot create VM in non-default cluster

2019-04-29 Thread Strahil Nikolov
I've upgraded to Version 4.3.3.6-1.el7 and the issue is gone. Best Regards,Strahil Nikolov В неделя, 28 април 2019 г., 4:14:57 ч. Гринуич-4, Strahil Nikolov написа: It seems that No matter which cluster is selected - UI uses only the "Default" one. I'm attaching a screens

[ovirt-users] Re: ovirt 4.3.3 Disk for New VM is always Preallocated

2019-04-30 Thread Strahil Nikolov
I have raised a bug (1704782 – ovirt 4.3.3 doesn't allow creation of VM with "Thin Provision"-ed disk (always preallocated)) , despite not being sure if I have selected the right category. Best Regards, Strahil Nikolov В вторник, 30 април 2019 г., 9:31:46 ч. Гринуич-4, Strahil Nikolo

[ovirt-users] Re: ovirt 4.3.3 Disk for New VM is always Preallocated

2019-04-30 Thread Strahil Nikolov
noarch python2-ovirt-setup-lib-1.2.0-1.el7.noarch python-ovirt-engine-sdk4-4.3.1-2.el7.x86_64 Best Regards,Strahil Nikolov В понеделник, 29 април 2019 г., 20:45:57 ч. Гринуич-4, Oliver Riesener написа: Hi Strahil, sorry can’t reproduce it on NFS SD. - UI and Disk usage looks ok, Thin Provis

[ovirt-users] Re: ovirt 4.3.3 cannot create VM in non-default cluster

2019-04-28 Thread Strahil Nikolov
It seems that No matter which cluster is selected - UI uses only the "Default" one. I'm attaching a screenshot. Best Regards, Strahil Nikolov >Hi All, > >I'm having an issue to create a VM in my second cluster called "Intel" which >>consists of only 1

[ovirt-users] ovirt 4.3.3 cannot create VM in non-default cluster

2019-04-28 Thread Strahil Nikolov
n't match provided Cluster." When I try to select the host where I can put the VM , I see only ovirt1 or ovirt2 which are part of the 'Default' Cluster . Do we have an opened bug  for that ? Note: A workaround is to create the VM in the Default cluster and later edit it to match the needed Cluster

[ovirt-users] Re: HE deployment failing

2019-07-05 Thread Strahil Nikolov
Did you expand all your Gluster Bricks to have at least 61Gb (arbiter is not needed) ? A simple "df -h /gluster_bricks/engine/engine" should show the available space of your brick. Best Regards,Strahil Nikolov В петък, 5 юли 2019 г., 10:12:01 ч. Гринуич-4, Parth Dhanjal написа

  1   2   3   4   5   6   7   8   9   >