Re: [ovirt-users] ICMP with VLANS

Hi Lior, everything was configured by oVirt. Looking at the host configuration there is only one IP for the mgmt.-bridge. Regards, Sven -Ursprüngliche Nachricht- Von: Lior Vernia [mailto:lver...@redhat.com] Gesendet: Dienstag, 3. Februar 2015 14:34 An: Sven Achtelik Cc: users

[ovirt-users] ICMP with VLANS

Hi Everyone, I'm running a setup with Ovirt 3.5 on a Dell Server with hosted engine. A long as I use every NIC on the host with VLANs icmp is working fine. After creating these networks with VLAN-Tags to use them all on one card icmp is not working anymore. Is there something that I have to do

Re: [ovirt-users] ICMP with VLANS

Sven Achtelik Gesendet: Dienstag, 3. Februar 2015 07:57 An: users@ovirt.org Betreff: [ovirt-users] ICMP with VLANS Hi Everyone, I'm running a setup with Ovirt 3.5 on a Dell Server with hosted engine. A long as I use every NIC on the host with VLANs icmp is working fine. After creating

Re: [ovirt-users] Howto extend Hosted-Engine Disk

Hi Bob, how can I add a disk without the GUI ? It's a hosted engine install and the gui won't let me do any changes to the engine VM. Sven Von: Bob Doolittle [mailto:b...@doolittle.us.com] Gesendet: Mittwoch, 11. März 2015 16:06 An: Sven Achtelik; users@ovirt.org Betreff: Re: [ovirt-users

[ovirt-users] Howto extend Hosted-Engine Disk

Hi All, I've installed ovirt 3.5 with a hosted-engine some time ago and noticed that I've set the virtual disk of the engine to small during install. Is there a way to extend the virtual disk without reinstalling everything ? Thank you, Sven ___

Re: [ovirt-users] Hosted Engine-Setup issue additional host

Golan Gesendet: Sonntag, 26. April 2015 16:59 An: users@ovirt.org; Yedidyah Bar David Betreff: Re: [ovirt-users] Hosted Engine-Setup issue additional host On 04/26/2015 05:38 PM, Sven Achtelik wrote: Hi All, after a successful setup of hosted-engine on the first node I'm having trouble completing

[ovirt-users] Hosted Engine-Setup issue additional host

Hi All, after a successful setup of hosted-engine on the first node I'm having trouble completing it on an additional node. The Setup fails with: - [ INFO ] Waiting for the host to become operational in the engine. This may take several minutes... [ INFO ]

Re: [ovirt-users] Hosted-Engine Setup: Failed to setup networks

Hi All, fixed it, vdsm doesn't like the PREFIX entry in the ifcfg file. After changing that to NETMASK it worked. Sven Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag von Sven Achtelik Gesendet: Mittwoch, 22. April 2015 23:51 An: users@ovirt.org Betreff: [ovirt

[ovirt-users] Hosted-Engine Setup: Failed to setup networks

Hi Everyone, I tried to install oVirt 3.5 - hosted engine and it fails with some VDSM error while creating the ovirtmgmt bridge. The Host is running CentOS 7 and the interface I want to use is em1 and it's the parent interface from a vlan. [ ERROR ] Failed to execute stage 'Misc

Re: [ovirt-users] Hosted Engine-Setup issue additional host

An: Sven Achtelik Cc: Yedidyah Bar David; Roy Golan; users@ovirt.org Betreff: Re: AW: AW: AW: [ovirt-users] Hosted Engine-Setup issue additional host Uh this really is weird. The situation is clear though: Broker dies when it tries to initialize logging (missing /dev/stdout ???) Agent dies because

Re: [ovirt-users] Hosted Engine-Setup issue additional host

-Ursprüngliche Nachricht- Von: Yedidyah Bar David [mailto:d...@redhat.com] Gesendet: Montag, 27. April 2015 09:46 An: Sven Achtelik; Martin Sivak Cc: Roy Golan; users@ovirt.org Betreff: Re: AW: AW: [ovirt-users] Hosted Engine-Setup issue additional host - Original

Re: [ovirt-users] Bad performance with Windows 2012 guests

Hi Doron, I've also noticed that there seems to be a difference in performance between Win2k8 R2/Linux and Windows Server 2012. After reading Martijns post I've done some speed test regarding the drive speeds and was looking for a way to compare the VMs on a more professional way. My tests

Re: [ovirt-users] Bad performance with Windows 2012 guests

Rozenfeld [mailto:vroze...@redhat.com] Gesendet: Montag, 4. Mai 2015 05:00 An: Sven Achtelik Cc: Doron Fediuck; Martijn Grendelman; Karen Noel; users@ovirt.org Betreff: Re: AW: AW: Bad performance with Windows 2012 guests On Sun, 2015-05-03 at 07:46 -0500, Sven Achtelik wrote: Hi Vadim, I've tested

Re: [ovirt-users] Bad performance with Windows 2012 guests

with the same results. Sven -Ursprüngliche Nachricht- Von: Vadim Rozenfeld [mailto:vroze...@redhat.com] Gesendet: Sonntag, 3. Mai 2015 14:35 An: Sven Achtelik Cc: Doron Fediuck; Martijn Grendelman; Karen Noel; users@ovirt.org Betreff: Re: AW: Bad performance with Windows 2012 guests On Sun

Re: [ovirt-users] Bad performance with Windows 2012 guests

Hi Vadim, could you reproduce my issue with your system ? Do you have any advice on getting more performance with Win2012 ? Thank you, Sven -Ursprüngliche Nachricht- Von: Vadim Rozenfeld [mailto:vroze...@redhat.com] Gesendet: Dienstag, 5. Mai 2015 02:57 An: Sven Achtelik Cc: Doron

[ovirt-users] Slow Export Domain

Hi Everyone, I'm trying to export VMs to an Export Domain for Backup and noticed that all of this is running at max 100Mbit/s. Is this some limitation that comes with the Export Domain ? I've checked all network connections and all of them report at least 1000Mbits/s. Am I missing something ?

Re: [ovirt-users] Slow Export Domain

<christophe.tref...@uni.lu> Cc: Sven Achtelik <sven.achte...@mailpool.us>; users@ovirt.org Betreff: Re: [ovirt-users] Slow Export Domain On Jun 22, 2016, at 12:31 PM, Christophe TREFOIS <christophe.tref...@uni.lu<mailto:christophe.tref...@uni.lu>> wrote: Not true, we have s

[ovirt-users] Rearrange View of VMs

Hi List, does anyone know if it's possible the rearange the colums in the VMs view ? I would like to have the Desciption directly next to Name and IP Address before Host. Thank you, Sven smime.p7s Description: S/MIME cryptographic signature

Re: [ovirt-users] Rearrange View of VMs

Nachricht- Von: Alexander Wels [mailto:aw...@redhat.com] Gesendet: Montag, 23. Januar 2017 15:39 An: users@ovirt.org Cc: Sven Achtelik <sven.achte...@eps.aero> Betreff: Re: [ovirt-users] Rearrange View of VMs On Monday, January 23, 2017 8:00:58 AM EST Sven Achtelik wrote: > Hi List, >

Re: [ovirt-users] [Spice-devel] Video performance

Hi, where would I have to add this: I mean which file or is it somewhere in the config ? I found something that sounds like it would do the same. What do you think about that ? http://www.jieyung.com/en/faq.asp?newsclassid=377=508 It's written for 3.5 and does something

Re: [ovirt-users] Mirgration issues

. Von: Fred Rolland [mailto:froll...@redhat.com] Gesendet: Dienstag, 21. Februar 2017 13:59 An: Sven Achtelik <sven.achte...@eps.aero> Cc: users <users@ovirt.org> Betreff: Re: [ovirt-users] Mirgration issues I see the following in the source VDSM log : 2017-02-21 05:53:28,067 INFO (mig

Re: [ovirt-users] Mirgration issues

) was filtered out by 'VAR__FILTERTYPE__INTERNAL' filter 'HA' (correlation id: 8ff8601b-238b-4565-b3bf-de6211cb4685) I suggest you first check if the host is functioning correctly. Regards, Yanir Quinn On Tue, Feb 21, 2017 at 3:04 PM, Sven Achtelik <sven.achte...@eps.aero<mailto:sven.achte

Re: [ovirt-users] Mirgration issues

Did that twice and it didn’t change anything. Von: Arman Khalatyan [mailto:arm2...@gmail.com] Gesendet: Donnerstag, 23. Februar 2017 15:02 An: Sven Achtelik <sven.achte...@eps.aero> Cc: Yanir Quinn <yqu...@redhat.com>; users <users@ovirt.org> Betreff: Re: [ovirt-users] Mirgrat

Re: [ovirt-users] Mirgration issues

Do you mean just reinstalling from the Engine gui or reinstalling it completely including the OS? Von: Arman Khalatyan [mailto:arm2...@gmail.com] Gesendet: Donnerstag, 23. Februar 2017 13:45 An: Sven Achtelik <sven.achte...@eps.aero> Cc: Yanir Quinn <yqu...@redhat.com>; users <

Re: [ovirt-users] Mirgration issues

with nothing running on host 02. Von: Arman Khalatyan [mailto:arm2...@gmail.com] Gesendet: Donnerstag, 23. Februar 2017 11:59 An: Sven Achtelik <sven.achte...@eps.aero> Cc: Yanir Quinn <yqu...@redhat.com>; users <users@ovirt.org> Betreff: Re: [ovirt-users] Mirgration issues Did y

Re: [ovirt-users] Mirgration issues

about it and that it’s not fixed yet. Von: Arman Khalatyan [mailto:arm2...@gmail.com] Gesendet: Donnerstag, 23. Februar 2017 13:22 An: Sven Achtelik <sven.achte...@eps.aero> Cc: Yanir Quinn <yqu...@redhat.com>; users <users@ovirt.org> Betreff: Re: [ovirt-users] Mirgration is

Re: [ovirt-users] Mirgration issues

How could this vm persist over reboots and reinstalls? And how would I remove this ? Von: Michal Skrivanek [mailto:michal.skriva...@redhat.com] Gesendet: Donnerstag, 23. Februar 2017 17:35 An: Sven Achtelik <sven.achte...@eps.aero>; Martin Sivak <msi...@redhat.com> Cc: Arman Kha

[ovirt-users] GUI is slow when in Hosts Tab

Hi All, the Engine Gui is working fine and fast until I open the Hosts Tab and selected on of my Hosts. It's taking about 10 Seconds after selecting a Host until I can see any information for the Host. After doing this everything feels sticky until I logout and login again. This happens with

Re: [ovirt-users] VM incremental backup

Hi Yaniv, how can this be done with DD ? Since it doesn’t know if the block is free space ? I’ve been looking for such a solution for a long time now. Everything I could find out was that I have to use a utility that understands the FS and therefore knows where the free space is. Thank you,

Re: [ovirt-users] VM incremental backup

No, I never came across this approach. I didn’t know about virt-sparsify. I’ll look into that and give it a try. Thank you Von: Yaniv Dary [mailto:yd...@redhat.com] Gesendet: Dienstag, 27. September 2016 15:10 An: Sven Achtelik <sven.achte...@mailpool.us> Cc: Maton, Bret

[ovirt-users] oVirt HC setup question

Hi All, I'm planning to install oVirt 4 with the HC setup from this blogpost and did a demo setup. http://www.ovirt.org/blog/2016/08/up-and-running-with-ovirt-4-0-and-gluster-storage/ I've managed to install everything just fine and thought that enabling a storage network would move all the

Re: [ovirt-users] oVirt HC setup question

at.com>> wrote: On Wed, Dec 7, 2016 at 6:46 PM, Sven Achtelik <sven.achte...@eps.aero<mailto:sven.achte...@eps.aero>> wrote: > Hi All, > > > > I’m planning to install oVirt 4 with the HC setup from this blogpost and did > a demo setup. > > > > http://ww

Re: [ovirt-users] Event History for a VM

Cecchi <gianluca.cec...@gmail.com> Cc: Sven Achtelik <sven.achte...@eps.aero>; users@ovirt.org; Raz Tamir <rata...@redhat.com>; Goldblatt, Kevin <kgold...@redhat.com> Betreff: Re: [ovirt-users] Event History for a VM Hi Sven, On your engine you can run the following to get the

Re: [ovirt-users] Event History for a VM

to look at. Thank you, Sven Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag von Sven Achtelik Gesendet: Donnerstag, 16. März 2017 11:54 An: users@ovirt.org Betreff: [ovirt-users] Event History for a VM Hi All, I would need to have an Event-History of our VMs

Re: [ovirt-users] Changing gateway ping address

Hi Sandro, where can I find that answer file ? Running ovirt 4.1. Thank you, Sven -Ursprüngliche Nachricht- Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag von Sandro Bonazzola Gesendet: Freitag, 10. Juli 2015 09:26 An: Matteo ;

Re: [ovirt-users] Changing gateway ping address

Thank you, which table is holding that information ? How can I change that value in the DB ? Access it directly ? Von: Simone Tiraboschi [mailto:stira...@redhat.com] Gesendet: Donnerstag, 16. März 2017 16:20 An: Sandro Bonazzola <sbona...@redhat.com> Cc: Sven Achtelik <sven.achte...

Re: [ovirt-users] Engine HA-Issues

. Juli 2017 08:10 An: Sven Achtelik <sven.achte...@eps.aero> Cc: users@ovirt.org Betreff: Re: [ovirt-users] Engine HA-Issues Hi , Can you please check the following. Following could be one of the reason why HE vm restarts every minute. Check the error or engine health state. If it’s

Re: [ovirt-users] Very poor GlusterFS performance

Hi All, it's the same for me. I've update all my hosts to the latest release and thought it would now use libgfapi since BZ 1022961 is listed in the release notes under enhancements. Are there any steps that need to be taken after upgrading for this to

[ovirt-users] Engine HA-Issues

Hi All, after running solid for several month my ovirt-engine started rebooting on several hosts. I've looked into the hostend-engine -vm-status and it sees that the engine is up on one host but not reachable. At the same time I can access the gui and everything is working fine. After some

Re: [ovirt-users] Windows 2016 Sysprep - Fixed IP

Ok, I'll try that. Thank you -Ursprüngliche Nachricht- Von: Tomáš Golembiovský [mailto:tgole...@redhat.com] Gesendet: Donnerstag, 27. Juli 2017 12:16 An: Sven Achtelik <sven.achte...@eps.aero> Cc: users@ovirt.org Betreff: Re: [ovirt-users] Windows 2016 Sysprep - Fixed IP On Thu,

[ovirt-users] Windows 2016 Sysprep - Fixed IP

Hi All, I'm looking into configuring a Windows 2016 Template via Run Once to have an static IP. Is there any way to do that ? Maybe over the Sysrep Section ? I didn't find an answer about how to use it or what syntax should be used ? Must I put a complete answer file into it or will this

[ovirt-users] Timeout for Hosts

Hi All, I have 2 hosts which are at remote locations where the ISP is forcing a connection reset after some days. During that reset the connection will be down for at most 2 minutes and the engine starts to complain about the hosts not being reachable. What is the right value to tweak to

Re: [ovirt-users] Timeout for Hosts

Ok, I'll try that one. Thank you -Ursprüngliche Nachricht- Von: Piotr Kliczewski [mailto:piotr.kliczew...@gmail.com] Gesendet: Donnerstag, 27. April 2017 09:59 An: Oved Ourfali <oourf...@redhat.com> Cc: Sven Achtelik <sven.achte...@eps.aero>; users@ovirt.org Betreff: Re:

[ovirt-users] Hyperconverged Setup and Gluster healing

Hi All, my oVirt-Setup is 3 Hosts with gluster and reaplica 3. I always try to stay on the current version and I'm applying updates/upgrade if there are any. For this I put a host in maintenance and also use the "Stop Gluster Service" checkbox. After it's done updating I'll set it back to

Re: [ovirt-users] Hyperconverged Setup and Gluster healing

Hi Kasturi, I'll try that. Will this be persistent over a reboot of a host or even stopping of the complete cluster ? Thank you Von: knarra [mailto:kna...@redhat.com] Gesendet: Montag, 24. April 2017 13:44 An: Sven Achtelik <sven.achte...@eps.aero>; users@ovirt.org Betreff: Re: [ovirt

[ovirt-users] Removing *250GB Disk from Gluster SD - Error

Hi All, I was trying to remove a ~250GB Disk from a Gluster SD and the engine has gone crazy. The Storage latency went up dramatically, which caused a change of the spm and everything to get unresponsive for about 10-30 seconds. How do I remove such a big disk in a way that this doesn't

[ovirt-users] "Could not detect Guest Agent on VM"

Hi All, I have several Windows VMs (Server 2012, Server 2012 R2) running and the guest tools are installed. IF I go and check the Services in those VMs I can also see the "Ovirt Guest Service" running and the "QEMU Guest Agent" running. Also there is Information about the VM show in the GUI,

Re: [ovirt-users] "Could not detect Guest Agent on VM"

.EE658F20] Is there anthing that needs to be changed ? Thank you, Sven -Ursprüngliche Nachricht- Von: Tomáš Golembiovský [mailto:tgole...@redhat.com] Gesendet: Monday, June 26, 2017 2:06 PM An: Sven Achtelik <sven.achte...@eps.aero> Cc: ovirt users <users@ovirt.org> Betreff

[ovirt-users] Error when taking snapshot on gluster SD

Hi All, I was taking a snapshot from a gluster based SD and got this errors: [root@ovirt-engine ovirt-engine]# zgrep -e 3102e526-172b-49a7-ae64-5879a7eb8079 engine.log-* engine.log-20170523.gz:2017-05-23 01:54:13,223-05 INFO

Re: [ovirt-users] Timeout for Hosts

Seems to be wokring. Thank you ! -Ursprüngliche Nachricht- Von: Piotr Kliczewski [mailto:piotr.kliczew...@gmail.com] Gesendet: Montag, 29. Mai 2017 10:41 An: Sven Achtelik <sven.achte...@eps.aero> Cc: Oved Ourfali <oourf...@redhat.com>; users@ovirt.org Betreff: Re: [ovirt-us

Re: [ovirt-users] Timeout for Hosts

Hi Piotr, I can't find that in the list of variables to set if I do an "engine-config -a" Is this something I have to setup first ? Thank you, Sven -Ursprüngliche Nachricht- Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag von Sven Achteli

Re: [ovirt-users] Timeout for Hosts

oVirt Engine Version: 4.1.2.2-1.el7.centos -Ursprüngliche Nachricht- Von: Piotr Kliczewski [mailto:piotr.kliczew...@gmail.com] Gesendet: Montag, 29. Mai 2017 10:30 An: Sven Achtelik <sven.achte...@eps.aero> Cc: Oved Ourfali <oourf...@redhat.com>; users@ovirt.org Betreff

Re: [ovirt-users] windows 2016 drivers

...@logicworks.pt [mailto:supo...@logicworks.pt] Gesendet: Mittwoch, 7. Juni 2017 12:06 An: Gianluca Cecchi <gianluca.cec...@gmail.com> Cc: Sven Achtelik <sven.achte...@eps.aero>; ovirt users <users@ovirt.org> Betreff: Re: [ovirt-users] windows 2016 drivers I mean for a 2016 as a w

Re: [ovirt-users] Seamless SAN HA failovers with oVirt?

Hi Matthew, I'm also using a HA TrueNAS as the storage. I have NFS as well as iscsi shares and did do some in place upgrade. The failover went more or less smooth, it was more of an issue on the TrueNas side where the different vlans didn't come up. This caused the engine to take down the

Re: [ovirt-users] oVirt and FreeNAS

Hi Latcho, I'm using FreeNas and TrueNas and I'm happy with both Systems. For FreeNas I'm using an older Server with 64GB RAM and 2,8GhZ CPU. I'm running NFS as well as iSCSI and both work well. The performance is as expected maxing out the 1Gbit/s LAN connection and it could do more with

[ovirt-users] Huge Glsuter Issues - oVirt 4.1.7

Hi All, I'm experiencing huge issues when working with big VMs on Gluster volumes. Doing a Snapshot or removing a big Disk lead to the effect that the SPM node is getting non responsive. Fencing is than kicking in and taking the node down with the hard reset/reboot. My setup has three nodes

Re: [ovirt-users] Recovering oVirt-Engine with a backup before upgrading to 4.2

Even changing the locale.conf to en_US without the UTF8 doesn't change anything. Is this information cached somewhere and needs to be reread before this will work ? Any advice on moving forward is appreciated. Thank you, Sven > -Ursprüngliche Nachricht- > Von: Yedidyah Bar David [mailto:d...

[ovirt-users] Re: Upgrade from 4.1 to 4.2 failing - SQL Issues

Hi Paul, I only used the automatic update from oVirt. I'll look through the older post if I can do something with this information. Thanks, Sven -Ursprüngliche Nachricht- Von: p.stanifo...@leedsbeckett.ac.uk [mailto:p.stanifo...@leedsbeckett.ac.uk] Gesendet: Donnerstag, 26. Juli

[ovirt-users] Re: Upgrade from 4.1 to 4.2 failing - SQL Issues

=en_US SELINUX_LEVEL_REQUESTED= HISTCONTROL=ignoredups SHLVL=1 HOME=/root LOGNAME=root SSH_CONNECTION= LESSOPEN=||/usr/bin/lesspipe.sh %s XDG_RUNTIME_DIR=/run/user/0 _=/usr/bin/env Von: Simone Tiraboschi [mailto:stira...@redhat.com] Gesendet: Donnerstag, 26. Juli 2018 12:42 An: Sven Achtelik Cc

[ovirt-users] Re: Upgrade from 4.1 to 4.2 failing - SQL Issues

to work with my prod and be sure that whatever I'm doing is going to be a successful. Would you happen to have any other ideas to upgrade the DB part of it ? Thanks, Sven -Ursprüngliche Nachricht- Von: Sven Achtelik [mailto:sven.achte...@eps.aero] Gesendet: Freitag, 27. Juli 2018 09:31

[ovirt-users] Re: Upgrade from 4.1 to 4.2 failing - SQL Issues

Von: Simone Tiraboschi [mailto:stira...@redhat.com] Gesendet: Montag, 30. Juli 2018 09:19 An: Sven Achtelik Cc: Yedidyah Bar David ; users ; Gobinda Das Betreff: Re: [ovirt-users] Re: Upgrade from 4.1 to 4.2 failing - SQL Issues On Fri, Jul 27, 2018 at 9:27 AM Sven Achtelik

[ovirt-users] Re: Upgrade from 4.1 to 4.2 failing - SQL Issues

ystem from a 4.1.7 Backup to a 4.1.9 image and all went well. Do you need any other values ? Thanks, Sven Von: Simone Tiraboschi [mailto:stira...@redhat.com] Gesendet: Dienstag, 24. Juli 2018 15:47 An: Sven Achtelik ; Yedidyah Bar David Cc: users ; Gobinda Das Betreff: Re: [ovirt-users] Re: Up

[ovirt-users] Re: Upgrade from 4.1 to 4.2 failing - SQL Issues

Hi Paul, I'm trying with the latest packages, 4.2.5. How would I manually change those encodings ? Thanks, Sven -Ursprüngliche Nachricht- Von: p.stanifo...@leedsbeckett.ac.uk [mailto:p.stanifo...@leedsbeckett.ac.uk] Gesendet: Dienstag, 24. Juli 2018 15:54 An: users@ovirt.org

[ovirt-users] Re: Upgrade from 4.1 to 4.2 failing - SQL Issues

Sorry, wrong, I have the following setup packes installed ovirt-engine-setup.noarch 4.2.4.5-1.el7 @ovirt-4.2 ovirt-engine-setup-base.noarch 4.2.4.5-1.el7 @ovirt-4.2 -Ursprüngliche Nachricht- Von: Sven Achtelik [mailto:sven.achte...@eps.aero

[ovirt-users] Upgrade from 4.1 to 4.2 failing - SQL Issues

Hi All, I'm still struggling to upgrade from 4.1 to 4.2 and the root cause seems to be the SQL upgrade. I installed my 4.1.9 with the engine appliance image and restored a DB to it. My Upgrade to 4.2 is failing with the errors below: Performing Consistency

Re: [ovirt-users] Recovering oVirt-Engine with a backup before upgrading to 4.2

liche Nachricht- > Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag > von Sven Achtelik > Gesendet: Mittwoch, 28. März 2018 18:28 > An: Yedidyah Bar David > Cc: users@ovirt.org > Betreff: Re: [ovirt-users] Recovering oVirt-Engine with a backup before

Re: [ovirt-users] Recovering oVirt-Engine with a backup before upgrading to 4.2

ted-engine-setup.noarch > -Ursprüngliche Nachricht- > Von: Yedidyah Bar David [mailto:d...@redhat.com] > Gesendet: Freitag, 20. April 2018 08:55 > An: Sven Achtelik; Simone Tiraboschi > Cc: users@ovirt.org > Betreff: Re: [ovirt-users] Recovering oVirt-Engine with a backup before &g

Re: [ovirt-users] Workflow after restoring engine from backup

I did look at this, for the VMs in question there are no entries on the run_on_vds and migrating_to_vds fields. I'm thinking of giving this a try. -Ursprüngliche Nachricht- Von: Yedidyah Bar David [mailto:d...@redhat.com] Gesendet: Sonntag, 25. März 2018 07:46 An: Sven Achtelik Cc

[ovirt-users] Recovering oVirt-Engine with a backup before upgrading to 4.2

Hi All, I'm still facing issues with my HE engine. Here are the steps that I took to end up in this situation: - Update Engine from 4.1.7 to 4.1.9 o That worked as expected - Automatic Backup of Engine DB in the night - Upgraded Engine from 4.1.9 to 4.2.1 o That

Re: [ovirt-users] Recovering oVirt-Engine with a backup before upgrading to 4.2

> -Ursprüngliche Nachricht- > Von: Yedidyah Bar David [mailto:d...@redhat.com] > Gesendet: Mittwoch, 28. März 2018 10:06 > An: Sven Achtelik > Cc: users@ovirt.org > Betreff: Re: [ovirt-users] Recovering oVirt-Engine with a backup before > upgrading to 4.2 > >

Re: [ovirt-users] Recovering oVirt-Engine with a backup before upgrading to 4.2

> -Ursprüngliche Nachricht- > Von: Yedidyah Bar David [mailto:d...@redhat.com] > Gesendet: Mittwoch, 28. März 2018 10:06 > An: Sven Achtelik > Cc: users@ovirt.org > Betreff: Re: [ovirt-users] Recovering oVirt-Engine with a backup before > upgrading to 4.2 > >

[ovirt-users] Hosted-Engine Agent broken

Hi All, after upgrading my engine to 4.2 and upgrading my hosts to the latest versions the HA for the hosted engine is not working anymore. The Agent fails with the following errors. Did I miss anything while upgrading ? The Engine is still running - what would be the correct approach to get

[ovirt-users] Workflow after restoring engine from backup

Hi All, I had issue with the storage that hosted my engine vm. The disk got corrupted and I needed to restore the engine from a backup. That worked as expected, I just didn't start the engine yet. I know that after the backup was taken some machines where migrated around before the engine

Re: [ovirt-users] Workflow after restoring engine from backup

-66bd1b9d83af | 0 | xWOR | 2 | -1 (4 rows) Should that be enough to have a safe start of the engine without any HA action kicking in. ? -Ursprüngliche Nachricht- Von: Yedidyah Bar David [mailto:d...@redhat.com] Gesendet: Montag, 19. März 2018 10:18 An: Sven Achtelik

Re: [ovirt-users] Workflow after restoring engine from backup

. Ursprüngliche Nachricht Von: Yedidyah Bar David <d...@redhat.com> Datum: 19.03.18 07:33 (GMT+01:00) An: Sven Achtelik <sven.achte...@eps.aero> Cc: users@ovirt.org Betreff: Re: [ovirt-users] Workflow after restoring engine from backup On Sun, Mar 18, 2018 at 11:45 PM, Sven Achtelik

[ovirt-users] Re: multiple engines (active passive)

Hi Alex, could you share more details on your setup ? I also had issues with restoring the engine from a backup and it made me think of running engine not a self hosted HA. I don’t have any experience with pacemaker/corrosync and drbd, but I’m willing to test and find out how to use these for

[ovirt-users] HowTo trace errors or issues ?

Hi All, I would like to understand how to find the point that fails when starting from the Event showing in the GUI. With that event I get an correlation ID and how would I trace all the following tasks, actions or events that are connected to that correlation ID ? Is it something like

[ovirt-users] Python to retrive the VM-Config from the snapshot

Hi All, I'm trying to build a custom solution for Backups using the python. Everything works and I can get my disk copies. The last thing is getting the VM config and I can't find any hint on how to get this done with python. Is there a way to actually get this information out easily ?

[ovirt-users] Re: Upgrading from oVirt-Node 4.2.8 to latest

I tried that and the result is that there is nothing to update. In the GUI it still shows up as 4.2.8 and running that command I don’t see it reading any 4.3 repositories. Von: Edward Berger [mailto:edwber...@gmail.com] Gesendet: Mittwoch, 9. Oktober 2019 14:46 An: Sven Achtelik Cc: users

[ovirt-users] Re: Upgrading from oVirt-Node 4.2.8 to latest

ssues on screen directly. Von: Yuval Turgeman [mailto:yturg...@redhat.com] Gesendet: Donnerstag, 10. Oktober 2019 10:28 An: Sandro Bonazzola Cc: Sven Achtelik ; Nir Levy ; users Betreff: [ovirt-users] Re: Upgrading from oVirt-Node 4.2.8 to latest Sven, assuming you yum installed [1], can you share your

[ovirt-users] Re: Upgrading from oVirt-Node 4.2.8 to latest

:36 An: Sven Achtelik Cc: users Betreff: Re: [ovirt-users] Upgrading from oVirt-Node 4.2.8 to latest Il giorno mer 9 ott 2019 alle ore 10:51 Sven Achtelik mailto:sven.achte...@eps.aero>> ha scritto: Hi All, is there a way to go from 4.2.8 on ovirt node to go directly to the latest v

[ovirt-users] Upgrading from oVirt-Node 4.2.8 to latest

Hi All, is there a way to go from 4.2.8 on ovirt node to go directly to the latest version, without reinstalling the node from the iso file ? I wasn't able to find anything in documentation on how to get this done. Thanks, Sven ___ Users mailing list

[ovirt-users] Re: Engine/host communication maybe broken

On the engine VM it looks like this: ovirt-engine-dwhd.service loaded active running oVirt Engine Data Warehouse ovirt-engine.service loaded active running oVirt

[ovirt-users] Engine/host communication maybe broken

Hi All, I'm currently facing a situation which I don't know how to resolve and I don't know how that happened. The hosted engine HA part is working fine and the vm starts. It's accessible via the gui and that's it. It's showing some hosts online and some offline. It looks like it's not