Hi
My usecase is that I am setting up a lab to emulate a customers
production environment which has multiple vlans. As this is done in a
hosting environment where I don't have any control over the switches,
I've created virtual switches with OpenVSwitch which connects together a
couple of
Has anybody succeeded in installing Ovirt 3.6 with hosted engine on a
server which uses OpenVSwitch for the network config?
I believe my issue is that Ovirt wants to control the network to create
a bridge for its management and I wants it to just use whatever network
is available on the host
can I accomplish that?
/Sverker
On 2016-04-13 14:50, Dan Kenigsberg wrote:
On Mon, Apr 11, 2016 at 01:24:51PM +0200, Sverker Abrahamsson wrote:
Hi
My usecase is that I am setting up a lab to emulate a customers production
environment which has multiple vlans. As this is done in a hosting
I've followed the instructions to best effort, so hopefully it's right..
Den 2017-01-13 kl. 10:31, skrev Marcin Mirecki:
Please push the patch into: https://gerrit.ovirt.org/ovirt-provider-ovn
(let me know if you need some directions)
- Original Message -
From: "Sverker Abraha
dccb59a
addresses: ["00:1a:4a:16:01:54"]
port 92f6d3c8-68b3-4986-9c09-60bee04644b5
addresses: ["00:1a:4a:16:01:52"]
port ovirtbridge-port2
addresses: ["unknown"]
port ovirtbridge-port1
addresses: [&
Port_Binding "ovirtbridge-port1"
Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"
hostname: "h1.limetransit.com"
Encap geneve
ip: "144.76.84.73"
options: {csum="true"}
Port_Binding "ovirtbridge-port2"
Port_
- Original Message -
From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
To: "Marcin Mirecki" <mmire...@redhat.com>
Cc: "Ovirt Users" <users@ovirt.org>
Sent: Friday, December 30, 2016 12:15:43 PM
Subject: Re: [ovirt-users] Issue
in your case would probably be to create br-int and connect
this to your ovirtbridge, although I don't know the details of your env, so
this is just my best guess.
Marcin
- Original Message -
From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
To: "Marcin Mirecki&
g/repos/ovirt/experimental/master/ovirt-provider-ovn_fc24_46/rpm/fc24/noarch/
- Original Message -
From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
To: "Marcin Mirecki" <mmire...@redhat.com>
Cc: "Ovirt Users" <users@ovirt.org>
Sent: Friday,
in ??
[root@h2 share]# rpm -qf
/usr/share/otopi/plugins/ovirt-host-deploy/openstack/neutron_openvswitch.py
ovirt-host-deploy-1.6.0-0.0.master.20161215101008.gitb76ad50.el7.centos.noarch
/Sverker
Den 2016-12-28 kl. 23:24, skrev Sverker Abrahamsson:
In addition I had to add an alias to modprobe:
From
/usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook
(installed by ovirt-provider-ovn-driver rpm):
BRIDGE_NAME = 'br-int'
Den 2016-12-28 kl. 23:56, skrev Sverker Abrahamsson:
Googling on the message about br-int suggested adding that bridge to ovs:
ovs-vsctl add-br br
host works, although I need to
resolve the traffic issue over the OVS tunnel.
/Sverker
Den 2017-01-02 kl. 01:13, skrev Sverker Abrahamsson:
1. That is not possible as ovirt (or vdsm) will rewrite the network
configuration to a non-working state. That is why I've set that if as
hidden to vdsm and
correct id.
/Sverker
Den 2017-01-09 kl. 10:06, skrev Marcin Mirecki:
The port is set up on the host by the ovirt-provider-ovn-driver.
The driver is invoked by the vdsm hook whenever any operation on
the port is done.
Please ensure that this is installed properly.
You can check the vdsm log (/va
Sverker
Den 2017-01-09 kl. 10:41, skrev Sverker Abrahamsson:
This is the content of vdsm.log on h1 at this time:
2017-01-06 20:54:12,636 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC
call VM.create succeeded in 0.01 seconds (__init__:515)
2017-01-06 20:54:12,636 INFO (vm/6dd5291e) [virt.vm]
(v
-0500 (EST)
Från: Marcin Mirecki <mmire...@redhat.com>
Till: Sverker Abrahamsson <sver...@abrahamsson.com>
Kopia: Ovirt Users <users@ovirt.org>, Lance Richardson
<lrich...@redhat.com>, Numan Siddique <nusid...@redhat.com>
Let me add the OVN team.
Lanc
setting configuring the OVN-controller?
Marcin
- Original Message -
From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
To: "Marcin Mirecki" <mmire...@redhat.com>
Cc: "Ovirt Users" <users@ovirt.org>
Sent: Thursday, December 29, 2016 11:44
vn-config" or
using the OVN tools directly.
Please check out: https://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/
for details.
Also please note that the OVN provider is completely different
from the neutron-openvswitch plugin. Please don't mix the two.
Marcin
- Original Message
emove the nameservers section as well. At first I could not get it
to work, as vdsm-network would find the backup file
/var/lib/vdsm/persistence/netconf/nets/ovirtmgmt~ but after removing
that it worked fine.
Not sure when nameservers and defaultroute was set in vdsm as it worked
on reboot be
:07, skrev Sverker Abrahamsson:
By default the vNic profile of my OVN bridge ovirtbridge gets a
Network filter named vdsm-no-mac-spoofing. If I instead set No filter
then I don't get those ebtables / iptables messages. It seems that
there is some issue between ovirt/vdsm and firewalld, which we
.
It is not clear for me why the port is added on br-int instead of the
bridge I've assigned to the VM, which is ovirtbridge??
/Sverker
Den 2016-12-29 kl. 14:20, skrev Sverker Abrahamsson:
The specific command most likely fails because there is no chain named
libvirt-J-vnet0, but when should
there + testcode of some variants
/Sverker
Den 2016-12-29 kl. 22:55, skrev Sverker Abrahamsson:
When I change
/usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook
to instead of hardcoded to br-int use BRIDGE_NAME = 'ovirtbridge' then
I get the expected behaviour and I get
rt2"
Port_Binding "92f6d3c8-68b3-4986-9c09-60bee04644b5"
I don't know from where the faulty id comes from, it's not in any logs.
In the domain xml as printed in vdsm.log the id is correct:
).
Please give me some time to look for a solution.
- Original Message -
From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
To: "Marcin Mirecki" <mmire...@redhat.com>
Cc: "Ovirt Users" <users@ovirt.org>
Sent: Wednesday, December 28, 2016 11:48
can only handle external networks, which can not be used for a
management network.
Marcin
- Original Message -
From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
To: users@ovirt.org
Sent: Wednesday, December 28, 2016 12:39:59 AM
Subject: [ovirt-users] Issue with OVN/O
Hi
For long time I've been looking for proper support in ovirt for Open
vSwitch so I'm happy that it is moving in the right direction. However,
there seems to still be a dependency on a ovirtmgmt bridge and I'm
unable to move that to the OVN provider.
The hosting center where I rent hw
Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9)
7692306 8272306 Email: yd...@redhat.com <mailto:yd...@redhat.com> IRC
: ydary
On Wed, Dec 28, 2016 at 1:39 AM, Sverker Abrahamsson
<sver...@abrahamsson.com <mailto:sver...@abrahamsson.com>> wrote:
Hi
For l
to use it for
the setup.
Marcin
- Original Message -
From: "Marcin Mirecki" <mmire...@redhat.com>
To: "Sverker Abrahamsson" <sver...@abrahamsson.com>
Cc: "Ovirt Users" <users@ovirt.org>
Sent: Wednesday, December 28, 2016 12:06:26 PM
Subject: Re
In addition I had to add an alias to modprobe:
[root@h2 modprobe.d]# cat dummy.conf
alias dummy0 dummy
Den 2016-12-28 kl. 23:03, skrev Sverker Abrahamsson:
Hi
I first tried to set device name to dummy_0, but then ifup did not
succeed in creating the device unless I first did 'ip link add
vm_guid| run_on_vds
--+
4e4df6ea-ea01-465b-9424-4436aa24cec0 |
(1 row)
/Sverker
Den 2017-04-28 kl. 10:32, skrev Simone Tiraboschi:
On Thu, Apr 27, 2017 at 9:27 PM, Sverker Abrahamsson
<sver...@abrah
Hi
I upgraded an old ovirt installation from 3.5 to latest version, but end
up with this error message when running engine-setup:
[ INFO ] Stage: Setup validation
[ ERROR ] It seems that you are running your engine inside of the
hosted-engine VM and are not in "Global Maintenance" mode. In
Since upgrading my test lab to ovirt 4.2 I can't get ovirt-provider-ovn
to work. From ovirt-provider-ovn.log:
2017-11-14 00:40:15,795 Request: POST : /v2.0///tokens
2017-11-14 00:40:15,795 Request body:
{
"auth" : {
"passwordCredentials" : {
"username" : "admin@internal",
rface element in xml sent to libvirt is similar so I
think an understanding of where it comes from is necessary to
troubleshoot that (if needed).
/Sverker
Den 2018-05-13 kl. 00:23, skrev Sverker Abrahamsson:
Sure, they are attached. The attempt to start the hosted engine vm
occurs at 14:29:42
Hi
I have a problem with running hosted engine with openvswitch. I have one
cluster where the ovirt engine runs on the host, there it works and when
starting a vm the interface definition looks like this:
slot="0x03" type="pci" />
Hi Dominik
Den 2018-05-10 kl. 22:08, skrev Dominik Holler:
On Thu, 10 May 2018 19:15:07 +0200
Sverker Abrahamsson <sver...@abrahamsson.com> wrote:
Hi
I have a problem with running hosted engine with openvswitch. I have
Which version of oVirt?
Ovirt version is 4.2.3.5, vdsm version 4
engine up, but resyncing host network from engine side makes it loose
the connection.
/Sverker
Den 2018-05-14 kl. 10:12, skrev Sverker Abrahamsson:
Apparently the logs were too big for the mailing list, but should have
been received by Petr and Dominik. Let me know if not.
What it boils down
Hi Jonathan,
it seems somewhat similar to what I've been struggeling with. I've
worked around it with a hook script until someone can explain from where
it should discover that the interface should be created on an ovs
bridge. Look at the thread with topic "hosted engine with openvswitch".
In my setup the reason why I attempted to use OVS/OVN is that I
(currently) have two hosts in a data center (Hetzner) which does not
have a common subnet. Each of these hosts have one public IPv4 address.
Because of that I want the ovirt networks to be on private ip ranges and
they do not
to
set up a consistent naming from the virtual bios.
If it matters the switch type used is OVS.
/Sverker
Den 2018-03-26 kl. 13:41, skrev Sverker Abrahamsson:
I have a number of vm's running under Ovirt 4.2, most are CentOS 7 and
one Debian. Issue is that when multiple network interfaces are
assigned
:
On Thu, Sep 3, 2020 at 12:21 PM Sverker Abrahamsson
mailto:sver...@abrahamsson.com>> wrote:
Hi Ales,
right now I have a manually created ovirtmgmt bridge (virbr0 and
vnet0 seems to be created during the failed attempt to deploy
hosted engine):
[root@h1-mgmt ~]# nmcli co
Hi,
I'm attempting to install hosted engine but getting this failure:
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The
host has been set in non_operational status, deployment errors: code
505: Host h1-mgmt.limetransit.com installation failed. Failed to
configure
to create the
bridge manually and not through vdsm if that is possible.
/Sverker
Den 2020-09-02 kl. 19:14, skrev Sverker Abrahamsson via Users:
Hi,
I'm attempting to install hosted engine but getting this failure:
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "m
Гринуич+3, Sverker Abrahamsson via Users
написа:
Pretty formatting the "desired state" it seems that vdsm tries to remove
the ip of my underlying interface, that is enp4s0:
{
'interfaces': [{
'name': 'enp4s0',
'state': 'up',
'
Was it ever solved to install hosted engine with ovn? I tried a few
years ago, got it almost to work but then gave up.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
switch brand & model ?
Maybe someone more experienced in networking can help.
Best Regards,
Strahil Nikolov
В сряда, 2 септември 2020 г., 23:39:57 Гринуич+3, Sverker Abrahamsson via Users
написа:
Well, unforturnatly I don't have a choise since it is out of my control.
I only have
ipv4:
enabled: false
ipv6:
enabled: false
mac-address: A2:35:7A:6C:B7:EF
mtu: 1500
/Sverker
Den 2020-09-03 kl. 11:54, skrev Ales Musil:
On Thu, Sep 3, 2020 at 11:51 AM Sverker Abrahamsson via Users
mailto:users@ovirt.org>> wrote:
Hi Dominik
That is my issue, I
to change.
/Sverker
Den 2020-09-03 kl. 10:52, skrev Dominik Holler:
On Wed, Sep 2, 2020 at 10:38 PM Sverker Abrahamsson via Users
mailto:users@ovirt.org>> wrote:
Well, unforturnatly I don't have a choise since it is out of my
control.
I only have one physical network port
We ran in to this issue as well when trying to install Ovirt Hyperconverged.
The root issue is that kmod-kvdo in Centos 8 (and probably upstream) is
built for a specific kernel and if you don't run that kernel it is not
found. This is a major issue even if you match the kernel version then
if
47 matches
Mail list logo
