[Users] Storage unresponsive after sanlock

2014-01-27 Thread Trey Dockendorf
I setup my first oVirt instance since 3.0 a few days ago and it went very well, and I left the single host cluster running with 1 VM over the weekend. Today I come back and the primary data storage is marked as unresponsive. The logs are full of entries [1] that look very similar to a knowledge

Re: [Users] ovirt-3.3.3 release postponed due to blockers

2014-01-28 Thread Trey Dockendorf
I found manually installing python-cpopen before adding a node in the engine is a viable workaround. This was on EL6.5 - Trey On Jan 28, 2014 7:57 AM, Sven Kieske s.kie...@mittwald.de wrote: Hi, and thanks for your fast reply. I know this does not fix it, but I'm preparing to deploy new

Re: [Users] Storage unresponsive after sanlock

2014-01-29 Thread Trey Dockendorf
hosts I'll reset everything and try to reproduce this with some monitoring to get a timestamp for approximate time of failure. Thanks - Trey Regards, Maor On 01/29/2014 02:50 AM, Trey Dockendorf wrote: See attached. The event seems to have begun around 06:00:00 on 2014-01-26. I was unable

Re: [Users] Storage unresponsive after sanlock

2014-01-29 Thread Trey Dockendorf
are the differences between the two hosts (VDSM version, OS version) Does the first host succeeded to work on other DC? Have you tried to reinstall it? Regards, Maor On 01/29/2014 02:50 AM, Trey Dockendorf wrote: See attached. The event seems to have begun around 06:00:00 on 2014-01-26. I was unable

Re: [Users] vdsm-python-cpopen is obsoleted by python-cpopen

2014-01-30 Thread Trey Dockendorf
Try manually installing python-cpopen on the node before adding node in the engine. On Jan 30, 2014 2:33 PM, Robert Story rst...@tislabs.com wrote: Hello, Any status on the pthon-cpopen obsoleted issue? Or any work-arounds? BZ is here: https://bugzilla.redhat.com/show_bug.cgi?id=1056470. I

Re: [Users] vdsm re setup?

2014-01-31 Thread Trey Dockendorf
I ran into same issue. I'm setting up an ovirt module that has the sudoer file for ovirt 3.3.2. Are you using filebucket with puppet? If so, try restoring. - Trey On Jan 31, 2014 1:15 PM, Matt Warren mwar...@hnw.com wrote: I'm putting vdsm on a host that is also managed by puppet. I'm

Re: [Users] vdsm re setup?

2014-01-31 Thread Trey Dockendorf
Matt, I uploaded the puppet module I wrote for oVirt, https://github.com/treydock/puppet-ovirt. It's very in the very early stages and lightly tested so use with caution. - Trey On Fri, Jan 31, 2014 at 1:15 PM, Matt Warren mwar...@hnw.com wrote: I'm putting vdsm on a host that is also managed

[Users] Mixing tagged and untagged VLANs

2014-02-03 Thread Trey Dockendorf
Using 3.3.2 I seem unable to mix tagged and untagged VLANs on a single interface. I'm trying to put the following logical networks on a host's eth0. ovirtmgmt: - Display Network - Migration Network - NOT VM Network - NO VLAN private: - VM network - NO VLAN ipmi: - VM Network - VLAN 2

Re: [Users] Mixing tagged and untagged VLANs

2014-02-05 Thread Trey Dockendorf
:) Assaf Muller, Cloud Networking Engineer Red Hat - Original Message - From: Trey Dockendorf treyd...@gmail.com To: users users@ovirt.org Sent: Monday, February 3, 2014 10:45:44 PM Subject: [Users] Mixing tagged and untagged VLANs Using 3.3.2 I seem unable to mix tagged and untagged

Re: [Users] engine-backup --restore

2014-02-12 Thread Trey Dockendorf
I was having the same issue (and posted about it today, with full steps). I'd reply to my current post to list but I don't seem to receive my own posts. I have since taken these steps (as root) $ su - postgres -c dropdb engine $ su - postgres -c psql -c \create user engine password 'PASSWORD'\

Re: [Users] engine-backup --restore

2014-02-13 Thread Trey Dockendorf
page with this mentioning you so others can get this easily. Regards, On 12/02/14 17:32, Trey Dockendorf wrote: I was having the same issue (and posted about it today, with full steps). I'd reply to my current post to list but I don't seem to receive my own posts. I have since taken

Re: [Users] eninge-cleanup left db non-empty (was: Downgrading to 3.3.3 after 3.4.0 beta 2 testing)

2014-02-13 Thread Trey Dockendorf
On Thu, Feb 13, 2014 at 1:55 AM, Yedidyah Bar David d...@redhat.com wrote: - Original Message - From: Yedidyah Bar David d...@redhat.com To: Trey Dockendorf treyd...@gmail.com Cc: users users@ovirt.org, in...@ovirt.org Sent: Thursday, February 13, 2014 8:32:01 AM Subject: eninge

Re: [Users] eninge-cleanup left db non-empty (was: Downgrading to 3.3.3 after 3.4.0 beta 2 testing)

2014-02-18 Thread Trey Dockendorf
Submitted against 3.3.3, https://bugzilla.redhat.com/show_bug.cgi?id=1066654 I am in process of installing 3.4.0-betaN to see if this only effects 3.3.3. - Trey On Sun, Feb 16, 2014 at 5:01 AM, Yedidyah Bar David d...@redhat.com wrote: - Original Message - From: Trey Dockendorf treyd

Re: [Users] Host Non-Operational from sanlock and VM fails to migrate

2014-02-18 Thread Trey Dockendorf
On Wed, Feb 12, 2014 at 3:04 AM, Nir Soffer nsof...@redhat.com wrote: - Original Message - From: Trey Dockendorf treyd...@gmail.com To: Itamar Heim ih...@redhat.com Cc: users users@ovirt.org Sent: Monday, February 10, 2014 3:03:05 AM Subject: Re: [Users] Host Non-Operational from sanlock

Re: [Users] eninge-cleanup left db non-empty (was: Downgrading to 3.3.3 after 3.4.0 beta 2 testing)

2014-02-18 Thread Trey Dockendorf
the following two commands were enough to allow restore to run. $ su - postgres -c dropdb engine $ su - postgres -c psql -c \create database engine owner engine template template0 encoding 'UTF8' lc_collate 'en_US.UTF-8' lc_ctype 'en_US.UTF-8'\ - Trey On Tue, Feb 18, 2014 at 2:32 PM, Trey Dockendorf treyd

Re: [Users] Snapshots not listed for VM using 3.3.4

2014-03-08 Thread Trey Dockendorf
On Sat, Mar 8, 2014 at 1:24 AM, Markus Stockhausen stockhau...@collogia.de wrote: Von: users-boun...@ovirt.org [users-boun...@ovirt.org]quot; im Auftrag von quot;Trey Dockendorf [treyd...@gmail.com] Gesendet: Freitag, 7. März 2014 23:23 An: users Betreff: [Users] Snapshots not listed for VM

Re: [Users] proper way to move nfs data storage domain?

2014-03-20 Thread Trey Dockendorf
I believe for the iso/exports domain you can export them from the UI Storage tab once they are detached from the data center, then import them from new server. Haven't tested this thoroughly, but before my system was production I had to shift storage domains around due to host renaming. - Trey

[ovirt-users] Unable to edit virt-v2v import VM - 3.4.0

2014-04-15 Thread Trey Dockendorf
I just imported a VM using the following command: virt-v2v -ic qemu+ssh://root@kvm1.DOMAIN/system -o rhev -os 192.168.202.245:/tank/ovirt/import_export --network ovirtmgmt --vmtype server syslog.DOMAIN I successfully imported it in the oVirt web UI, but when I try to edit the VM I get the

Re: [ovirt-users] IO errors when adding new disk on iSCSI storage

2014-05-15 Thread Trey Dockendorf
A colleague of mine has run into issues doing Linux (EL6.5) iSCSI over bonded interfaces. The solution he found was to abandon bonding and instead use multiple interfaces and multipath on the iscsi initiators. I can't provide details yet as this is all second hand knowledge. The errors you

Re: [Users] installing ovirt engine on CentOS

2012-03-08 Thread Trey Dockendorf
On Thu, Mar 8, 2012 at 1:12 PM, Nathan Stratton nat...@robotics.net wrote: On Thu, 8 Mar 2012, Elias Abacioglu wrote: I was hoping to have something in the middle cause I have no budget. I'm going to use this server to host my own test virtual guests. Basically to build and test packages on

Re: [Users] installing ovirt engine on CentOS

2012-03-08 Thread Trey Dockendorf
On Thu, Mar 8, 2012 at 5:30 PM, Elias Abacioglu elias.r...@gmail.com wrote: Will jpackage help? http://www.jpackage.org/installation.php Yes, It solves many of the problems but I still need to build a python-2.7 rpm package for EL6. After that I would reckon the next step would be to build

Re: [Users] installing ovirt engine on CentOS

2012-03-08 Thread Trey Dockendorf
On Thu, Mar 8, 2012 at 5:30 PM, Elias Abacioglu elias.r...@gmail.com wrote: Will jpackage help? http://www.jpackage.org/installation.php Yes, It solves many of the problems but I still need to build a python-2.7 rpm package for EL6. After that I would reckon the next step would be to build

Re: [Users] oVirt RPM install for RHEL 6.2

2012-03-20 Thread Trey Dockendorf
On Tue, Mar 20, 2012 at 12:17 PM, Andrei Vakhnin andrey.a.vakh...@nasa.gov wrote: Anyone was able to get a successful installation of ovirt-engine on RHELS 6.2? When I try to do rpm install of virt-engine on rhel6.2 I'm getting following errors: Error: Package:

[Users] oVirt 3.1 - Error adding host , incorrect vdsm version

2012-06-18 Thread Trey Dockendorf
I have a ovirt-3.1 server installed in CentOS 6.2 via the ovirt-dre repo , this is what is installed on the server with ovirt-engine ovirt-engine.noarch 3.1.0_0001-1.8.el6 @ovirt-dre ovirt-engine-backend.noarch 3.1.0_0001-1.8.el6

Re: [Users] oVirt 3.1 - Error adding host , incorrect vdsm version

2012-06-18 Thread Trey Dockendorf
On Mon, Jun 18, 2012 at 3:25 PM, Dan Kenigsberg dan...@redhat.com wrote: On Mon, Jun 18, 2012 at 03:01:10PM -0500, Trey Dockendorf wrote: I have a ovirt-3.1 server installed in CentOS 6.2 via the ovirt-dre repo , this is what is installed on the server with ovirt-engine ovirt

Re: [Users] Host setup for 3.1 beta

2012-06-18 Thread Trey Dockendorf
iso and also a plain Fedora 17 with the latest vdsm packages but in both cases the registration seems to succeed but the installation seems to fail. Could you provide more information about the failure? is this the issue reported by Trey Dockendorf in http://lists.ovirt.org/pipermail/users

[Users] Managing ovirt-node with Puppet - Bad idea?

2012-06-18 Thread Trey Dockendorf
Currently I've been running all my KVM systems as standard libvirt managed hypervisors with virt-manager for creating VMs. All the setup of these systems was done via Puppet, including bridges and pool definitions. Now that I've setup my first ovirt-node I'm wondering if Puppet is appropriate on

Re: [Users] oVirt 3.1 - Error adding host , incorrect vdsm version

2012-06-19 Thread Trey Dockendorf
- On Mon, Jun 18, 2012 at 04:08:06PM -0500, Trey Dockendorf wrote: On Mon, Jun 18, 2012 at 3:25 PM, Dan Kenigsberg dan...@redhat.com wrote: On Mon, Jun 18, 2012 at 03:01:10PM -0500, Trey Dockendorf wrote: snip You are right. And it is truly surprising that this bug

Re: [Users] Setting up logical storage networks

2012-06-20 Thread Trey Dockendorf
Thanks for the response, see responses inline. On Wed, Jun 20, 2012 at 2:54 AM, Mike Kolesnik mkole...@redhat.com wrote: Hi, Please see reply in-line. In ovirt-engine-3.1 I'm attempting to setup the base logical networks and have run into 2 major issues. Are you using cluster version 3.0

Re: [Users] Setting up logical storage networks

2012-06-22 Thread Trey Dockendorf
On Thu, Jun 21, 2012 at 7:17 AM, Dan Kenigsberg dan...@redhat.com wrote: On Wed, Jun 20, 2012 at 02:52:19PM -0400, Mike Kolesnik wrote: Thanks for the response, see responses inline. You're welcome, responses inline. On Wed, Jun 20, 2012 at 2:54 AM, Mike Kolesnik mkole...@redhat.com

Re: [Users] What is it going to take to get EL6 builds?

2012-07-05 Thread Trey Dockendorf
On Jul 5, 2012 5:05 PM, Robert Middleswarth rob...@middleswarth.net wrote: I know there are a few things that don't work under oVirt on EL6 but there are unofficial builds out there and they seem to work pretty well. What is the major stopper from getting EL6 builds? Is it just a mater of

Re: [Users] iSCSI discovery not showing all LUNs - oVirt 3.1

2012-07-06 Thread Trey Dockendorf
On Fri, Jul 6, 2012 at 8:07 AM, Itamar Heim ih...@redhat.com wrote: On 07/05/2012 06:08 PM, Trey Dockendorf wrote: I have a Promise M300i iSCSI with 2 LUNs. A 2TB LUN with ID 2260-0001-557c-af0a and a 4TB LUN with ID 22d9-0001-553e-4d6a. What's strange, is the very first time I ran

Re: [Users] Migrating from KVM to oVirt 3.1 fails - corrupt OVF

2012-07-20 Thread Trey Dockendorf
On Fri, Jul 20, 2012 at 3:52 AM, Itamar Heim ih...@redhat.com wrote: On 07/20/2012 02:08 AM, Trey Dockendorf wrote: On Thu, Jul 19, 2012 at 4:00 AM, Matthew Booth mbo...@redhat.com wrote: On 18/07/12 23:52, Itamar Heim wrote: On 07/18/2012 06:00 PM, Trey Dockendorf wrote: I'm attempting

Re: [Users] Migrating from KVM to oVirt 3.1 fails - corrupt OVF

2012-07-20 Thread Trey Dockendorf
On Fri, Jul 20, 2012 at 11:32 AM, Itamar Heim ih...@redhat.com wrote: On 07/20/2012 07:21 PM, Trey Dockendorf wrote: On Fri, Jul 20, 2012 at 3:52 AM, Itamar Heim ih...@redhat.com wrote: On 07/20/2012 02:08 AM, Trey Dockendorf wrote: On Thu, Jul 19, 2012 at 4:00 AM, Matthew Booth mbo

[Users] Issue setting IP information for Non-VM networks

2012-08-08 Thread Trey Dockendorf
A few weeks back I started a discussion about my issues with IP/Netmask not being set on networks that weren't enabled for VM use. The bug is here, https://bugzilla.redhat.com/show_bug.cgi?id=834205. I've since upgrade to latest ovirt / vdsm and while the issue seems to be resolved it's now

Re: [Users] Issue setting IP information for Non-VM networks

2012-08-09 Thread Trey Dockendorf
On Thu, Aug 9, 2012 at 3:19 AM, Igor Lvovsky ilvov...@redhat.com wrote: - Original Message - From: Mark Wu wu...@linux.vnet.ibm.com To: Trey Dockendorf treyd...@gmail.com Cc: users users@ovirt.org, ilvov...@redhat.com Sent: Thursday, August 9, 2012 10:44:42 AM Subject: Re: [Users

Re: [Users] Migrating from KVM to oVirt 3.1 fails - corrupt OVF

2012-08-11 Thread Trey Dockendorf
On Sun, Jul 22, 2012 at 3:20 PM, Ayal Baron aba...@redhat.com wrote: SNIP Would a qcow2 image with preallocation=metadata be possible on an iSCSI data store? ayal? nope. metadata preallocation means that each logical block has a corresponding physical block. Ayal, by saying

Re: [ovirt-users] ovirt-3.4.2 add host failed

2014-07-15 Thread Trey Dockendorf
Try yum downgrading 'python-pthreading'. I had similar issue yesterday and seeing others reporting the same. - Trey On Tue, Jul 15, 2014 at 2:51 AM, lofyer lof...@gmail.com wrote: I installed ovirt-3.4.2 on CentOS-6.5 from yum. While I was trying to add host, I got an error like this: Host

[ovirt-users] Proper way to change and persist vdsm configuration options

2014-07-30 Thread Trey Dockendorf
I'm running ovirt nodes that are stock CentOS 6.5 systems with VDSM installed. I am using iSER to do iSCSI over RDMA and to make that work I have to modify /etc/vdsm/vdsm.conf to include the following: [irs] iscsi_default_ifaces = iser,default I've noticed that any time I upgrade a node from

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-04 Thread Trey Dockendorf
...@redhat.com wrote: On 07/31/2014 01:28 AM, Trey Dockendorf wrote: I'm running ovirt nodes that are stock CentOS 6.5 systems with VDSM installed. I am using iSER to do iSCSI over RDMA and to make that work I have to modify /etc/vdsm/vdsm.conf to include the following: [irs] iscsi_default_ifaces

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-05 Thread Trey Dockendorf
for such customization. Thanks, - Trey [1] - https://github.com/treydock/puppet-ovirt (README not fully updated as still working out how to use Puppet with oVirt) On 08/05/2014 08:12 AM, Trey Dockendorf wrote: I'll file BZ. As far as I can recall this has been an issue since 3.3.x as I have been

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-05 Thread Trey Dockendorf
I'm still learning new things about it almost daily, so forgive any of my assumptions above that may be wrong :). Thanks, - Trey - Original Message - From: ybronhei ybron...@redhat.com To: Trey Dockendorf treyd...@gmail.com Cc: users users@ovirt.org, Fabian Deutsch fabi...@redhat.com

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-05 Thread Trey Dockendorf
to perform the API call manually (ie curl)? Thanks! - Trey On Tue, Aug 5, 2014 at 1:45 PM, Alon Bar-Lev alo...@redhat.com wrote: - Original Message - From: Trey Dockendorf treyd...@gmail.com To: ybronhei ybron...@redhat.com Cc: users users@ovirt.org, Fabian Deutsch fabi...@redhat.com

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-05 Thread Trey Dockendorf
Bar-Lev alo...@redhat.com wrote: - Original Message - From: Trey Dockendorf treyd...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: ybronhei ybron...@redhat.com, users users@ovirt.org, Fabian Deutsch fabi...@redhat.com, Dan Kenigsberg dan...@redhat.com, Itamar Heim ih...@redhat.com

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-05 Thread Trey Dockendorf
://www.ovirt.org/Features/HostDeployProtocol On Tue, Aug 5, 2014 at 3:01 PM, Alon Bar-Lev alo...@redhat.com wrote: - Original Message - From: Trey Dockendorf treyd...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: ybronhei ybron...@redhat.com, users users@ovirt.org, Fabian Deutsch fabi

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-05 Thread Trey Dockendorf
On Tue, Aug 5, 2014 at 3:31 PM, Itamar Heim ih...@redhat.com wrote: On 08/05/2014 09:36 PM, Trey Dockendorf wrote: On Tue, Aug 5, 2014 at 12:32 PM, ybronhei ybron...@redhat.com wrote: Hey, Just noticed something that I forgot about.. before filing new BZ, see in ovirt-host-deploy

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-21 Thread Trey Dockendorf
/HostDeployProtocol On Tue, Aug 5, 2014 at 11:32 PM, Alon Bar-Lev alo...@redhat.com wrote: - Original Message - From: Trey Dockendorf treyd...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: ybronhei ybron...@redhat.com, users users@ovirt.org, Fabian Deutsch fabi...@redhat.com, Dan Kenigsberg

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-21 Thread Trey Dockendorf
/keys/engine_id_rsa ssh-rsa PUBKEY Thanks, - Trey On Thu, Aug 21, 2014 at 1:44 PM, Alon Bar-Lev alo...@redhat.com wrote: - Original Message - From: Trey Dockendorf treyd...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: ybronhei ybron...@redhat.com, users users@ovirt.org, Fabian

Re: [ovirt-users] Proper way to change and persist vdsm configuration options

2014-08-22 Thread Trey Dockendorf
For what it's worth I managed to get the ovirt-engine's public key from engine.cer using Ruby and turn it into a Puppet fact. Had to borrow some code from https://github.com/bensie/sshkey https://github.com/treydock/puppet-ovirt/blob/1.x/lib/facter/ovirt_engine_ssh_pubkey.rb Thanks for all the

[ovirt-users] VDSM and iSCSI issue due to ulimits

2014-09-12 Thread Trey Dockendorf
Today I got an alert from monitoring systems that my EL7 MariaDB VM was down. I looked in oVirt and it showed the VM as paused due to storage I/O problem. That VM is the only one currently attached to disks that are on an iSCSI storage domain. That iSCSI storage domain uses iSER (over DDR

Re: [ovirt-users] Admin console - Always show advanced options

2014-09-19 Thread Trey Dockendorf
If it was 3.4 then it's not working as I've always had to click the advanced options. Likely a 3.5 feature then? - Trey On Sep 19, 2014 7:33 AM, Alexander Wels aw...@redhat.com wrote: It should remember your setting of the advanced mode so once you clicked it once, the next time it should be

Re: [ovirt-users] Is it possible to add ISCSI over iser?

2014-09-29 Thread Trey Dockendorf
Arman, One of my storage domains is iSCSI using iSER. You need the following in vdsm.conf: [irs] iscsi_default_ifaces = iser,default I believe the proper way to set that so it's preserved during node updates is the following # cat /etc/ovirt-host-deploy.conf.d/40-custom-vdsm-config.conf

Re: [ovirt-users] How to add custom lines in to host interface?

2014-10-19 Thread Trey Dockendorf
I'd be interested in this too. I currently set CONNECTED_MODE outside of ovirt using Puppet, and have no tried this with 3.5 as yet to upgrade. Having full 65K MTU is key on my IB fabric and using iSER benefits from maintaining that value. - Trey On Oct 19, 2014 10:11 AM, Arman Khalatyan

[ovirt-users] VMs cannot be started, stuck in migration

2014-10-21 Thread Trey Dockendorf
I recently had my IB switch go down which brought down all storage connections. As a result all VMs were either paused or entered an unknown state. After many hours they are all finally in the off state according to the web GUI. When I try and start some VMs I get the following message: Cannot

[ovirt-users] Changing iSCSI LUN host IP and changing master domain

2014-10-21 Thread Trey Dockendorf
I had a catastrophic failure of the IB switch that was used by all my storage domains. I had one data domain that was NFS and one that was iSCSI. I managed to get the iSCSI LUN detached using the docs [1] but now I noticed that somehow my master domain went from the NFS domain to the iSCSI domain

Re: [ovirt-users] VMs cannot be started, stuck in migration

2014-10-21 Thread Trey Dockendorf
SIGNED MESSAGE- Hash: SHA1 On 21.10.2014 18:39, Trey Dockendorf wrote: I recently had my IB switch go down which brought down all storage connections. As a result all VMs were either paused or entered an unknown state. After many hours they are all finally in the off state

Re: [ovirt-users] Changing iSCSI LUN host IP and changing master domain

2014-10-21 Thread Trey Dockendorf
is odd considering the NFS data domain was added as master when I setup oVirt. Nothing will come back until I get the master domain online and unsure what to do now. Thanks, - Trey On Tue, Oct 21, 2014 at 12:58 PM, Trey Dockendorf treyd...@gmail.com wrote: I had a catastrophic failure of the IB

Re: [ovirt-users] Changing iSCSI LUN host IP and changing master domain

2014-10-21 Thread Trey Dockendorf
domain question. Does iscsi show connected using iscsiadm -m session and -m node ? in the vdsm log there should be the iscsiadm commands that were executed to connect. Does multipath -ll show anything? -John On Tue, Oct 21, 2014 at 3:18 PM, Trey Dockendorf treyd...@gmail.com wrote: I

[ovirt-users] Recovering iSCSI domain (Was: Changing iSCSI LUN host IP and changing master domain)

2014-10-21 Thread Trey Dockendorf
at 3:17 PM, Trey Dockendorf treyd...@gmail.com wrote: John, Thanks for reply. The Discover function in GUI works...it's once I try and login (Click the array next to target) that things just hang indefinitely. # iscsiadm -m session tcp: [2] 10.0.0.10:3260,1 iqn.2014-04

Re: [ovirt-users] Changing iSCSI LUN host IP and changing master domain

2014-10-21 Thread Trey Dockendorf
On Tue, Oct 21, 2014 at 4:17 PM, Trey Dockendorf treyd...@gmail.com wrote: John, Thanks for reply. The Discover function in GUI works...it's once I try and login (Click the array next to target) that things just hang indefinitely. # iscsiadm -m session tcp: [2] 10.0.0.10:3260,1 iqn

[ovirt-users] Proper way to change iSCSI and NFS IP

2014-10-21 Thread Trey Dockendorf
What is the proper way to change iSCSI and NFS IP used to access the storage domains? My IB fabric which was doing storage crashed and we have a scheduled maintenance window for next week at which time I'd like to either move my storage to 10GbE or back to IB. I was able to move things off IB to

Re: [ovirt-users] Proper way to change iSCSI and NFS IP

2014-10-22 Thread Trey Dockendorf
Thanks, will give it a try and report if I run into any problems. - Trey On Tue, Oct 21, 2014 at 9:19 PM, Amador Pahim apa...@redhat.com wrote: On 10/21/2014 07:37 PM, Trey Dockendorf wrote: What is the proper way to change iSCSI and NFS IP used to access the storage domains? Using

Re: [ovirt-users] Are there some general strategyhow to Iscsi strorage domain?

2014-10-23 Thread Trey Dockendorf
Not sure if it's a solution for you, but ZFS. My domains are all ZFS (using ZFS on Linux in EL6.5) and my backup server receives incremental snapshots from primary storage which includes both NFS exports and iSCSI. ZFS makes creating block devices for iSCSI very easy, and they are included in

Re: [ovirt-users] Fwd: Are there some general strategyhow to Iscsi strorage domain?

2014-10-23 Thread Trey Dockendorf
-- From: Arman Khalatyan arm2...@gmail.com Date: Thu, Oct 23, 2014 at 10:11 AM Subject: Re: [ovirt-users] Are there some general strategyhow to Iscsi strorage domain? To: Trey Dockendorf treyd...@gmail.com

Re: [ovirt-users] qemu-kvm from Jenkins - renamed packages to rhev?

2014-10-30 Thread Trey Dockendorf
, Trey Dockendorf wrote: In the past in order to have live snapshots work in CentOS 6.5 I had to use RPMs from http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/. I've noticed now that the RPMs have been renamed and no longer match the names of those distributed by CentOS

Re: [Users] New website live! Feedback welcome

2012-12-01 Thread Trey Dockendorf
On Fri, Nov 30, 2012 at 6:18 AM, Dave Neary dne...@redhat.com wrote: Hi everyone, The new oVirt website is now live! http://www.ovirt.org We have made some changes to the infrastructure (the website is now running on MediaWiki: http://www.mediawiki.org on Red Hat's Platform as a Service

Re: [Users] What do you want to see in oVirt next?

2013-01-09 Thread Trey Dockendorf
On Jan 3, 2013 4:15 PM, Moran Goldboim mgold...@redhat.com wrote: On 01/03/2013 07:42 PM, Darrell Budic wrote: On Jan 3, 2013, at 10:25 AM, Patrick Hurrelmann wrote: On 03.01.2013 17:08, Itamar Heim wrote: Hi Everyone, as we wrap oVirt 3.2, I wanted to check with oVirt users on what

[ovirt-users] Automation and engine-setup

2015-02-25 Thread Trey Dockendorf
I am attempting to update my Puppet module [1] that manages oVirt and have found my method for executing engine-setup works on a fresh install but fails if run after install, for example to enable reports. Normally I run this: yes 'Yes' | engine-setup

Re: [ovirt-users] VDSM network persistence through re-install

2015-06-22 Thread Trey Dockendorf
, - Trey On Mon, Jun 22, 2015 at 3:35 AM, Dan Kenigsberg dan...@redhat.com wrote: On Sat, Jun 20, 2015 at 12:28:10PM -0500, Trey Dockendorf wrote: I recently found that when I reinstall a VDSM host via the engine interface, if that host was actually re-provisioned via kickstart, the network

Re: [ovirt-users] Upgrade to 3.5.3 fails on ovirt-engine-notifier service

2015-06-22 Thread Trey Dockendorf
/notifier.conf.d and put you customizations here, for example: MAIL_SERVER=my-mail-server.com This way your changes survive upgrades. Let me know if you have any other issues with it. Thanks Martin Perina - Original Message - From: Trey Dockendorf treyd...@gmail.com To: users

[ovirt-users] VDSM network persistence through re-install

2015-06-20 Thread Trey Dockendorf
I recently found that when I reinstall a VDSM host via the engine interface, if that host was actually re-provisioned via kickstart, the network settings defined in the engine are lost. Before the re-install I had defined 4 bonds and attached 5 logical networks to the host. After a re-install

Re: [ovirt-users] ovirt-guest-agent puppet module available for testing

2016-02-21 Thread Trey Dockendorf
Good to see such a module in the Forge. I never got around to publishing my module for oVirt which has very basic ovirt guest management. https://github.com/treydock/puppet-ovirt/blob/1.x/manifests/guest.pp - Trey On Sun, Feb 21, 2016 at 5:42 AM, Eyal Edri wrote: > Hi Rene,