[ovirt-users] Re: Problem with cloud-init (metrics install)
On Mon, Aug 12, 2019 at 3:25 PM Chris Adams wrote: > I'm using ovirt-engine 4.3.5.5-1.el7. I installed the Metrics Store > using this guide and its CentOS settings: > > > https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html > > I tried to set a static IP on the created master0 VM per the guide by > setting the network settings under the Initial Run tab of the VM > settings, but they are not applied. If I start the VM with Run Once and > the network settings, they are applied, but if I shut it down and go > back to a regular run, the VM reverts back to DHCP. > > >From my understanding cloud-init oVirt should only provide the data source for cloud-init during the initial run. But the cloud-init data should be provided during the initial run if the VM is started by "Run" or "Run once". > Once upon a time, Dominik Holler said: > > On Sun, Aug 11, 2019 at 3:42 PM Liran Rotenberg > wrote: > > > > > Hi again, > > > Adding +Dominik Holler > > > > > > > Thanks for the heads up. > > > > > > > If you deployed the static configuration to the VM using cloud-init > > > you might be hitting this bug: > > > https://bugzilla.redhat.com/show_bug.cgi?id=1593010 > > > > > > Let me know if this is the case. If not, please elaborate on the steps > > > you did to this VM. > > > > > > > > Which version of ovirt-engine do you use? > > Which cloud image do you use? > > Which network setting is not applied as you expect? > > > > > > > Regards, > > > Liran. > > > > > > > > > > > > On Thu, Aug 8, 2019 at 8:32 PM Chris Adams wrote: > > > > > > > > How do you keep it from reverting back to DHCP on the next reboot? > > > > > > > > Once upon a time, Jayme said: > > > > > I found this a bit confusing myself. I ended up having to do it > > > manually > > > > > by logging in to the VM and changing the IP afterward. > > > > > > > > > > On Thu, Aug 8, 2019 at 11:21 AM Chris Adams > wrote: > > > > > > > > > > > I'm following this guide: > > > > > > > > > > > > > > > > > > > > > > https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html > > > > > > > > > > > > Specifically, the step "Setup virtual machine static IP and Mac > > > > > > address". The deploy does a bunch of stuff automatically, so the > > > first > > > > > > opportunity I have to do anything is after the VM is already > booted. > > > > > > > > > > > > It seems that having a DHCP server, with matching > reverse/forward DNS > > > > > > entries for each IP, is a requirement, and that there's not a > way to > > > set > > > > > > the metrics store VM to a static IP (despite having to have a DNS > > > entry > > > > > > pointing to an IP). > > > > > > > > > > > > Once upon a time, Liran Rotenberg said: > > > > > > > Hi Chris, > > > > > > > Run Once option is different from normal run. > > > > > > > For cloud-init you shall need the pre-requirement: > > > > > > > A sealed VM, for example if you wish to create a template: > > > > > > > > > > > > > > > > > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-templates#Sealing_Virtual_Machines_in_Preparation_for_Deployment_as_Templates > > > > > > > Cloud-init service should be installed and enabled on the VM > (make > > > > > > > sure before sealing the VM). > > > > > > > Run will consume the cloud-init configuration only if it is the > > > VM's > > > > > > first run. > > > > > > > > > > > > > > Regards, > > > > > > > Liran. > > > > > > > > > > > > > > On Thu, Aug 8, 2019 at 4:07 PM Chris Adams > > > wrote: > > > > > > > > > > > > > > > > I am trying to set up the oVirt Metrics Store, which uses > > > cloud-init > > > > > > for > > > > > > > > network settings, so I set the info under the "Initial Run" > tab. > > > > > > > > However, it doesn't seem to actually apply the network > settings > > > unless > > > > > > I > > > > > > > > "run once" and enable clout-init there. > > > > > > > > > > > > > > > > I haven't used cloud-init before (been on my to-do list to > check > > > out) - > > > > > > > > am I missing something? > > > > > > > > > > > > > > > > -- > > > > > > > > Chris Adams > > > > > > > > ___ > > > > > > > > Users mailing list -- users@ovirt.org > > > > > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > > > > Privacy Statement: > https://www.ovirt.org/site/privacy-policy/ > > > > > > > > oVirt Code of Conduct: > > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > > > List Archives: > > > > > > > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UKBKKLQQBFDNSVEIKETOD5GQPVVX2LBT/ > > > > > > > ___ > > > > > > > Users mailing list -- users@ovirt.org > > > > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > > > > oVirt Code of Conduct: > > > > > > https://
[ovirt-users] Re: Problem with cloud-init (metrics install)
I'm using ovirt-engine 4.3.5.5-1.el7. I installed the Metrics Store using this guide and its CentOS settings: https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html I tried to set a static IP on the created master0 VM per the guide by setting the network settings under the Initial Run tab of the VM settings, but they are not applied. If I start the VM with Run Once and the network settings, they are applied, but if I shut it down and go back to a regular run, the VM reverts back to DHCP. Once upon a time, Dominik Holler said: > On Sun, Aug 11, 2019 at 3:42 PM Liran Rotenberg wrote: > > > Hi again, > > Adding +Dominik Holler > > > > Thanks for the heads up. > > > > If you deployed the static configuration to the VM using cloud-init > > you might be hitting this bug: > > https://bugzilla.redhat.com/show_bug.cgi?id=1593010 > > > > Let me know if this is the case. If not, please elaborate on the steps > > you did to this VM. > > > > > Which version of ovirt-engine do you use? > Which cloud image do you use? > Which network setting is not applied as you expect? > > > > Regards, > > Liran. > > > > > > > > On Thu, Aug 8, 2019 at 8:32 PM Chris Adams wrote: > > > > > > How do you keep it from reverting back to DHCP on the next reboot? > > > > > > Once upon a time, Jayme said: > > > > I found this a bit confusing myself. I ended up having to do it > > manually > > > > by logging in to the VM and changing the IP afterward. > > > > > > > > On Thu, Aug 8, 2019 at 11:21 AM Chris Adams wrote: > > > > > > > > > I'm following this guide: > > > > > > > > > > > > > > > > > https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html > > > > > > > > > > Specifically, the step "Setup virtual machine static IP and Mac > > > > > address". The deploy does a bunch of stuff automatically, so the > > first > > > > > opportunity I have to do anything is after the VM is already booted. > > > > > > > > > > It seems that having a DHCP server, with matching reverse/forward DNS > > > > > entries for each IP, is a requirement, and that there's not a way to > > set > > > > > the metrics store VM to a static IP (despite having to have a DNS > > entry > > > > > pointing to an IP). > > > > > > > > > > Once upon a time, Liran Rotenberg said: > > > > > > Hi Chris, > > > > > > Run Once option is different from normal run. > > > > > > For cloud-init you shall need the pre-requirement: > > > > > > A sealed VM, for example if you wish to create a template: > > > > > > > > > > > > > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-templates#Sealing_Virtual_Machines_in_Preparation_for_Deployment_as_Templates > > > > > > Cloud-init service should be installed and enabled on the VM (make > > > > > > sure before sealing the VM). > > > > > > Run will consume the cloud-init configuration only if it is the > > VM's > > > > > first run. > > > > > > > > > > > > Regards, > > > > > > Liran. > > > > > > > > > > > > On Thu, Aug 8, 2019 at 4:07 PM Chris Adams > > wrote: > > > > > > > > > > > > > > I am trying to set up the oVirt Metrics Store, which uses > > cloud-init > > > > > for > > > > > > > network settings, so I set the info under the "Initial Run" tab. > > > > > > > However, it doesn't seem to actually apply the network settings > > unless > > > > > I > > > > > > > "run once" and enable clout-init there. > > > > > > > > > > > > > > I haven't used cloud-init before (been on my to-do list to check > > out) - > > > > > > > am I missing something? > > > > > > > > > > > > > > -- > > > > > > > Chris Adams > > > > > > > ___ > > > > > > > Users mailing list -- users@ovirt.org > > > > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > > > > oVirt Code of Conduct: > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > > List Archives: > > > > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UKBKKLQQBFDNSVEIKETOD5GQPVVX2LBT/ > > > > > > ___ > > > > > > Users mailing list -- users@ovirt.org > > > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > > > oVirt Code of Conduct: > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > List Archives: > > > > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TAATB64XMPFMBV3TGO6BZOQ3RNGX7Q6A/ > > > > > > > > > > -- > > > > > Chris Adams > > > > > ___ > > > > > Users mailing list -- users@ovirt.org > > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > > oVirt Code of Conduct: > > > > > https://www.ovirt.
[ovirt-users] Re: Problem with cloud-init (metrics install)
On Sun, Aug 11, 2019 at 3:42 PM Liran Rotenberg wrote: > Hi again, > Adding +Dominik Holler > Thanks for the heads up. > If you deployed the static configuration to the VM using cloud-init > you might be hitting this bug: > https://bugzilla.redhat.com/show_bug.cgi?id=1593010 > > Let me know if this is the case. If not, please elaborate on the steps > you did to this VM. > > Which version of ovirt-engine do you use? Which cloud image do you use? Which network setting is not applied as you expect? > Regards, > Liran. > > > > On Thu, Aug 8, 2019 at 8:32 PM Chris Adams wrote: > > > > How do you keep it from reverting back to DHCP on the next reboot? > > > > Once upon a time, Jayme said: > > > I found this a bit confusing myself. I ended up having to do it > manually > > > by logging in to the VM and changing the IP afterward. > > > > > > On Thu, Aug 8, 2019 at 11:21 AM Chris Adams wrote: > > > > > > > I'm following this guide: > > > > > > > > > > > > > https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html > > > > > > > > Specifically, the step "Setup virtual machine static IP and Mac > > > > address". The deploy does a bunch of stuff automatically, so the > first > > > > opportunity I have to do anything is after the VM is already booted. > > > > > > > > It seems that having a DHCP server, with matching reverse/forward DNS > > > > entries for each IP, is a requirement, and that there's not a way to > set > > > > the metrics store VM to a static IP (despite having to have a DNS > entry > > > > pointing to an IP). > > > > > > > > Once upon a time, Liran Rotenberg said: > > > > > Hi Chris, > > > > > Run Once option is different from normal run. > > > > > For cloud-init you shall need the pre-requirement: > > > > > A sealed VM, for example if you wish to create a template: > > > > > > > > > > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-templates#Sealing_Virtual_Machines_in_Preparation_for_Deployment_as_Templates > > > > > Cloud-init service should be installed and enabled on the VM (make > > > > > sure before sealing the VM). > > > > > Run will consume the cloud-init configuration only if it is the > VM's > > > > first run. > > > > > > > > > > Regards, > > > > > Liran. > > > > > > > > > > On Thu, Aug 8, 2019 at 4:07 PM Chris Adams > wrote: > > > > > > > > > > > > I am trying to set up the oVirt Metrics Store, which uses > cloud-init > > > > for > > > > > > network settings, so I set the info under the "Initial Run" tab. > > > > > > However, it doesn't seem to actually apply the network settings > unless > > > > I > > > > > > "run once" and enable clout-init there. > > > > > > > > > > > > I haven't used cloud-init before (been on my to-do list to check > out) - > > > > > > am I missing something? > > > > > > > > > > > > -- > > > > > > Chris Adams > > > > > > ___ > > > > > > Users mailing list -- users@ovirt.org > > > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > > > oVirt Code of Conduct: > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > List Archives: > > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UKBKKLQQBFDNSVEIKETOD5GQPVVX2LBT/ > > > > > ___ > > > > > Users mailing list -- users@ovirt.org > > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > > oVirt Code of Conduct: > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > List Archives: > > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TAATB64XMPFMBV3TGO6BZOQ3RNGX7Q6A/ > > > > > > > > -- > > > > Chris Adams > > > > ___ > > > > Users mailing list -- users@ovirt.org > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > oVirt Code of Conduct: > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > List Archives: > > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/PKZJG2AXVMWDXIT4R65DQ2BJI3OZF3OQ/ > > > > > > > > > ___ > > > Users mailing list -- users@ovirt.org > > > To unsubscribe send an email to users-le...@ovirt.org > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDRDSQQ4NJRN36WTKEKAJLQLOMK6B5FG/ > > > > > > -- > > Chris Adams > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy St
[ovirt-users] Re: Problem with cloud-init (metrics install)
Hi again, Adding +Dominik Holler If you deployed the static configuration to the VM using cloud-init you might be hitting this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1593010 Let me know if this is the case. If not, please elaborate on the steps you did to this VM. Regards, Liran. On Thu, Aug 8, 2019 at 8:32 PM Chris Adams wrote: > > How do you keep it from reverting back to DHCP on the next reboot? > > Once upon a time, Jayme said: > > I found this a bit confusing myself. I ended up having to do it manually > > by logging in to the VM and changing the IP afterward. > > > > On Thu, Aug 8, 2019 at 11:21 AM Chris Adams wrote: > > > > > I'm following this guide: > > > > > > > > > https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html > > > > > > Specifically, the step "Setup virtual machine static IP and Mac > > > address". The deploy does a bunch of stuff automatically, so the first > > > opportunity I have to do anything is after the VM is already booted. > > > > > > It seems that having a DHCP server, with matching reverse/forward DNS > > > entries for each IP, is a requirement, and that there's not a way to set > > > the metrics store VM to a static IP (despite having to have a DNS entry > > > pointing to an IP). > > > > > > Once upon a time, Liran Rotenberg said: > > > > Hi Chris, > > > > Run Once option is different from normal run. > > > > For cloud-init you shall need the pre-requirement: > > > > A sealed VM, for example if you wish to create a template: > > > > > > > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-templates#Sealing_Virtual_Machines_in_Preparation_for_Deployment_as_Templates > > > > Cloud-init service should be installed and enabled on the VM (make > > > > sure before sealing the VM). > > > > Run will consume the cloud-init configuration only if it is the VM's > > > first run. > > > > > > > > Regards, > > > > Liran. > > > > > > > > On Thu, Aug 8, 2019 at 4:07 PM Chris Adams wrote: > > > > > > > > > > I am trying to set up the oVirt Metrics Store, which uses cloud-init > > > for > > > > > network settings, so I set the info under the "Initial Run" tab. > > > > > However, it doesn't seem to actually apply the network settings unless > > > I > > > > > "run once" and enable clout-init there. > > > > > > > > > > I haven't used cloud-init before (been on my to-do list to check out) > > > > > - > > > > > am I missing something? > > > > > > > > > > -- > > > > > Chris Adams > > > > > ___ > > > > > Users mailing list -- users@ovirt.org > > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > List Archives: > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UKBKKLQQBFDNSVEIKETOD5GQPVVX2LBT/ > > > > ___ > > > > Users mailing list -- users@ovirt.org > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > List Archives: > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TAATB64XMPFMBV3TGO6BZOQ3RNGX7Q6A/ > > > > > > -- > > > Chris Adams > > > ___ > > > Users mailing list -- users@ovirt.org > > > To unsubscribe send an email to users-le...@ovirt.org > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/PKZJG2AXVMWDXIT4R65DQ2BJI3OZF3OQ/ > > > > > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDRDSQQ4NJRN36WTKEKAJLQLOMK6B5FG/ > > > -- > Chris Adams ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IXMWSBZSZ7Z5W3SROMJIMSBHFEGR7D72/
[ovirt-users] Re: Problem with cloud-init (metrics install)
How do you keep it from reverting back to DHCP on the next reboot? Once upon a time, Jayme said: > I found this a bit confusing myself. I ended up having to do it manually > by logging in to the VM and changing the IP afterward. > > On Thu, Aug 8, 2019 at 11:21 AM Chris Adams wrote: > > > I'm following this guide: > > > > > > https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html > > > > Specifically, the step "Setup virtual machine static IP and Mac > > address". The deploy does a bunch of stuff automatically, so the first > > opportunity I have to do anything is after the VM is already booted. > > > > It seems that having a DHCP server, with matching reverse/forward DNS > > entries for each IP, is a requirement, and that there's not a way to set > > the metrics store VM to a static IP (despite having to have a DNS entry > > pointing to an IP). > > > > Once upon a time, Liran Rotenberg said: > > > Hi Chris, > > > Run Once option is different from normal run. > > > For cloud-init you shall need the pre-requirement: > > > A sealed VM, for example if you wish to create a template: > > > > > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-templates#Sealing_Virtual_Machines_in_Preparation_for_Deployment_as_Templates > > > Cloud-init service should be installed and enabled on the VM (make > > > sure before sealing the VM). > > > Run will consume the cloud-init configuration only if it is the VM's > > first run. > > > > > > Regards, > > > Liran. > > > > > > On Thu, Aug 8, 2019 at 4:07 PM Chris Adams wrote: > > > > > > > > I am trying to set up the oVirt Metrics Store, which uses cloud-init > > for > > > > network settings, so I set the info under the "Initial Run" tab. > > > > However, it doesn't seem to actually apply the network settings unless > > I > > > > "run once" and enable clout-init there. > > > > > > > > I haven't used cloud-init before (been on my to-do list to check out) - > > > > am I missing something? > > > > > > > > -- > > > > Chris Adams > > > > ___ > > > > Users mailing list -- users@ovirt.org > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > > > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UKBKKLQQBFDNSVEIKETOD5GQPVVX2LBT/ > > > ___ > > > Users mailing list -- users@ovirt.org > > > To unsubscribe send an email to users-le...@ovirt.org > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TAATB64XMPFMBV3TGO6BZOQ3RNGX7Q6A/ > > > > -- > > Chris Adams > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/PKZJG2AXVMWDXIT4R65DQ2BJI3OZF3OQ/ > > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDRDSQQ4NJRN36WTKEKAJLQLOMK6B5FG/ -- Chris Adams ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HDNTABMK42QW27BBX7FNEISEPF7YEWCH/
[ovirt-users] Re: Problem with cloud-init (metrics install)
I found this a bit confusing myself. I ended up having to do it manually by logging in to the VM and changing the IP afterward. On Thu, Aug 8, 2019 at 11:21 AM Chris Adams wrote: > I'm following this guide: > > > https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html > > Specifically, the step "Setup virtual machine static IP and Mac > address". The deploy does a bunch of stuff automatically, so the first > opportunity I have to do anything is after the VM is already booted. > > It seems that having a DHCP server, with matching reverse/forward DNS > entries for each IP, is a requirement, and that there's not a way to set > the metrics store VM to a static IP (despite having to have a DNS entry > pointing to an IP). > > Once upon a time, Liran Rotenberg said: > > Hi Chris, > > Run Once option is different from normal run. > > For cloud-init you shall need the pre-requirement: > > A sealed VM, for example if you wish to create a template: > > > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-templates#Sealing_Virtual_Machines_in_Preparation_for_Deployment_as_Templates > > Cloud-init service should be installed and enabled on the VM (make > > sure before sealing the VM). > > Run will consume the cloud-init configuration only if it is the VM's > first run. > > > > Regards, > > Liran. > > > > On Thu, Aug 8, 2019 at 4:07 PM Chris Adams wrote: > > > > > > I am trying to set up the oVirt Metrics Store, which uses cloud-init > for > > > network settings, so I set the info under the "Initial Run" tab. > > > However, it doesn't seem to actually apply the network settings unless > I > > > "run once" and enable clout-init there. > > > > > > I haven't used cloud-init before (been on my to-do list to check out) - > > > am I missing something? > > > > > > -- > > > Chris Adams > > > ___ > > > Users mailing list -- users@ovirt.org > > > To unsubscribe send an email to users-le...@ovirt.org > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UKBKKLQQBFDNSVEIKETOD5GQPVVX2LBT/ > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TAATB64XMPFMBV3TGO6BZOQ3RNGX7Q6A/ > > -- > Chris Adams > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/PKZJG2AXVMWDXIT4R65DQ2BJI3OZF3OQ/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDRDSQQ4NJRN36WTKEKAJLQLOMK6B5FG/
[ovirt-users] Re: Problem with cloud-init (metrics install)
I'm following this guide: https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_Store.html Specifically, the step "Setup virtual machine static IP and Mac address". The deploy does a bunch of stuff automatically, so the first opportunity I have to do anything is after the VM is already booted. It seems that having a DHCP server, with matching reverse/forward DNS entries for each IP, is a requirement, and that there's not a way to set the metrics store VM to a static IP (despite having to have a DNS entry pointing to an IP). Once upon a time, Liran Rotenberg said: > Hi Chris, > Run Once option is different from normal run. > For cloud-init you shall need the pre-requirement: > A sealed VM, for example if you wish to create a template: > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-templates#Sealing_Virtual_Machines_in_Preparation_for_Deployment_as_Templates > Cloud-init service should be installed and enabled on the VM (make > sure before sealing the VM). > Run will consume the cloud-init configuration only if it is the VM's first > run. > > Regards, > Liran. > > On Thu, Aug 8, 2019 at 4:07 PM Chris Adams wrote: > > > > I am trying to set up the oVirt Metrics Store, which uses cloud-init for > > network settings, so I set the info under the "Initial Run" tab. > > However, it doesn't seem to actually apply the network settings unless I > > "run once" and enable clout-init there. > > > > I haven't used cloud-init before (been on my to-do list to check out) - > > am I missing something? > > > > -- > > Chris Adams > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UKBKKLQQBFDNSVEIKETOD5GQPVVX2LBT/ > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TAATB64XMPFMBV3TGO6BZOQ3RNGX7Q6A/ -- Chris Adams ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PKZJG2AXVMWDXIT4R65DQ2BJI3OZF3OQ/
[ovirt-users] Re: Problem with cloud-init (metrics install)
Hi Chris, Run Once option is different from normal run. For cloud-init you shall need the pre-requirement: A sealed VM, for example if you wish to create a template: https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-templates#Sealing_Virtual_Machines_in_Preparation_for_Deployment_as_Templates Cloud-init service should be installed and enabled on the VM (make sure before sealing the VM). Run will consume the cloud-init configuration only if it is the VM's first run. Regards, Liran. On Thu, Aug 8, 2019 at 4:07 PM Chris Adams wrote: > > I am trying to set up the oVirt Metrics Store, which uses cloud-init for > network settings, so I set the info under the "Initial Run" tab. > However, it doesn't seem to actually apply the network settings unless I > "run once" and enable clout-init there. > > I haven't used cloud-init before (been on my to-do list to check out) - > am I missing something? > > -- > Chris Adams > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UKBKKLQQBFDNSVEIKETOD5GQPVVX2LBT/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TAATB64XMPFMBV3TGO6BZOQ3RNGX7Q6A/
