Re: [ovirt-users] 答复: Engine is still unreachable
Hi, Sandvik sorry, but i can't find out what's wrong now... did you use ovirt-node or centos? and did you open sshd? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 答复: Engine is still unreachable
Hi Chou, I use CentOS 6.5 apply all updates then it is now CentOS 6.6, Yes, the port for sshd is already open by default, I tried to connect ssh from hosted-engine to host vice versa and the connection is successful using root user and even with the standard user. Now I'm trying to install CentOS 6.6 as a host and the oVirt-engine with the different server that meets the hardware minimum requirements of the oVIrt, but still, I hope someone can help me with this promlem. Thanks sandvik On Mon, Nov 24, 2014 at 10:58 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik sorry, but i can't find out what's wrong now... did you use ovirt-node or centos? and did you open sshd? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 答复: Engine is still unreachable
Hi users, Chou, here's my I already tried your suggestion right now, but it still failed, here's my engine.log and vdsm.log. and one more thing, since the time that I started the installation of ovirt-hosted-engine setup, I starting to have this kind of error message on my /var/log/message. Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Thanks in advance Sandvik On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik it's just a suggestion:-) i think you can have a try, as i don't know my solution worked or not. maybe there are some other people who have encountered this problem before and they can give you some advice:-) 2014-11-20 22:35 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: HI Chou, Thanks, I will try your solution now, and should I resend this email to users@ovirt.org? Thanks Sandvik On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik and please don't send the email to me only but to user mail list, so everybody can help you :-) 2014-11-20 9:17 GMT+08:00 Coffee Chou coffee@gmail.com: Hi, Sandvik i can see the ERROR message: Command returned failure code 1 during SSH session you can try these: 1. stop firewall on the hosted_engine_1 2. running command: vdsm-tool configure if it's still failure, please attach your engine.log and vdsm.log 2014-11-20 7:55 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi Chou, I have successfully install the hosted engine, but at the end of the installation I have this kind of error message To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM (3) Abort setup (1, 2, 3)[1]: [ INFO ] Engine replied: DB Up!Welcome to Health Status! Enter the name of the cluster to which you want to add the host (Default) [Default]: [ INFO ] Waiting for the host to become operational in the engine. This may take several minutes... [ ERROR ] The VDSM host was found in a failed state. Please check engine and bootstrap installation logs. [ ERROR ] Unable to add hosted_engine_1 to the manager Please shutdown the VM allowing the system to launch it as a monitored service. The system will wait until the VM is down. [ INFO ] Enabling and starting HA services Hosted Engine successfully set up [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf' [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been updated [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination The ovirt webadmin is accessible, but my hosted_engine_1 status failed. I tried to activate it inside the webadmin, but it say's Error while executing action: hosted_engine_1: - Cannot activate Host. Host has no unique id. and when I try to reinstall it on the webadmin, nothing happen it still failed status. I hope you can help me. Please see attach for screenshot. Thanks in advance. sandvik On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin agustinsand...@gmail.com wrote: Hi guys, First of all I want to thank you for replying my email. @Chou, yes I can access the engine webadmin. @Chao, I've tried the no. 1 option and it worked, when I check my /etc/hosts I have hostname conflict, then the ovirt engine is now reachable, but there's another error message, it say's invalid certificate. Is this because of I've put different FQDN during the installation process? On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou coffee@gmail.com wrote: Hi, Chao You may make a mistake, that's not my setup :-) But i don't think it's a problem of password. If the passwords were not the same, it will throw an ERROR of: [ ERROR ] Cannot automatically add the host to cluster None: HTTP Status 401 [ ERROR ] Failed to execute stage 'Closing up': Cannot add the host to cluster None so, i guess, maybe Sandvik's setup is
Re: [ovirt-users] 答复: Engine is still unreachable
Hi, I'm sorry I forgot, here's the attachement. On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik maybe you forgot to attach your log~ that's ovirt-hosted-engine-setup, so you can also attach your setup log:-) 2014-11-21 11:11 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi users, Chou, here's my I already tried your suggestion right now, but it still failed, here's my engine.log and vdsm.log. and one more thing, since the time that I started the installation of ovirt-hosted-engine setup, I starting to have this kind of error message on my /var/log/message. Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Thanks in advance Sandvik On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik it's just a suggestion:-) i think you can have a try, as i don't know my solution worked or not. maybe there are some other people who have encountered this problem before and they can give you some advice:-) 2014-11-20 22:35 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: HI Chou, Thanks, I will try your solution now, and should I resend this email to users@ovirt.org? Thanks Sandvik On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik and please don't send the email to me only but to user mail list, so everybody can help you :-) 2014-11-20 9:17 GMT+08:00 Coffee Chou coffee@gmail.com: Hi, Sandvik i can see the ERROR message: Command returned failure code 1 during SSH session you can try these: 1. stop firewall on the hosted_engine_1 2. running command: vdsm-tool configure if it's still failure, please attach your engine.log and vdsm.log 2014-11-20 7:55 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi Chou, I have successfully install the hosted engine, but at the end of the installation I have this kind of error message To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM (3) Abort setup (1, 2, 3)[1]: [ INFO ] Engine replied: DB Up!Welcome to Health Status! Enter the name of the cluster to which you want to add the host (Default) [Default]: [ INFO ] Waiting for the host to become operational in the engine. This may take several minutes... [ ERROR ] The VDSM host was found in a failed state. Please check engine and bootstrap installation logs. [ ERROR ] Unable to add hosted_engine_1 to the manager Please shutdown the VM allowing the system to launch it as a monitored service. The system will wait until the VM is down. [ INFO ] Enabling and starting HA services Hosted Engine successfully set up [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf' [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been updated [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination The ovirt webadmin is accessible, but my hosted_engine_1 status failed. I tried to activate it inside the webadmin, but it say's Error while executing action: hosted_engine_1: - Cannot activate Host. Host has no unique id. and when I try to reinstall it on the webadmin, nothing happen it still failed status. I hope you can help me. Please see attach for screenshot. Thanks in advance. sandvik On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin agustinsand...@gmail.com wrote: Hi guys, First of all I want to thank you for replying my email. @Chou, yes I can access the engine webadmin. @Chao, I've tried the no. 1 option and it worked, when I check my /etc/hosts I have hostname conflict, then the ovirt engine is now reachable, but there's another error message, it say's invalid certificate. Is this because of I've put different FQDN during the installation process? On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou coffee@gmail.com wrote: Hi, Chao You may make a
Re: [ovirt-users] 答复: Engine is still unreachable
Hi, Sandvik I have read the engine.log, it shows: Cannot find a valid baseurl for repo: base can you show me your repo? 2014-11-21 12:21 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi, I'm sorry I forgot, here's the attachement. On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin agustinsand...@gmail.com wrote: Hi, I'm sorry I forgot, here's the attachement. On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik maybe you forgot to attach your log~ that's ovirt-hosted-engine-setup, so you can also attach your setup log:-) 2014-11-21 11:11 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi users, Chou, here's my I already tried your suggestion right now, but it still failed, here's my engine.log and vdsm.log. and one more thing, since the time that I started the installation of ovirt-hosted-engine setup, I starting to have this kind of error message on my /var/log/message. Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Thanks in advance Sandvik On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik it's just a suggestion:-) i think you can have a try, as i don't know my solution worked or not. maybe there are some other people who have encountered this problem before and they can give you some advice:-) 2014-11-20 22:35 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: HI Chou, Thanks, I will try your solution now, and should I resend this email to users@ovirt.org? Thanks Sandvik On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik and please don't send the email to me only but to user mail list, so everybody can help you :-) 2014-11-20 9:17 GMT+08:00 Coffee Chou coffee@gmail.com: Hi, Sandvik i can see the ERROR message: Command returned failure code 1 during SSH session you can try these: 1. stop firewall on the hosted_engine_1 2. running command: vdsm-tool configure if it's still failure, please attach your engine.log and vdsm.log 2014-11-20 7:55 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com : Hi Chou, I have successfully install the hosted engine, but at the end of the installation I have this kind of error message To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM (3) Abort setup (1, 2, 3)[1]: [ INFO ] Engine replied: DB Up!Welcome to Health Status! Enter the name of the cluster to which you want to add the host (Default) [Default]: [ INFO ] Waiting for the host to become operational in the engine. This may take several minutes... [ ERROR ] The VDSM host was found in a failed state. Please check engine and bootstrap installation logs. [ ERROR ] Unable to add hosted_engine_1 to the manager Please shutdown the VM allowing the system to launch it as a monitored service. The system will wait until the VM is down. [ INFO ] Enabling and starting HA services Hosted Engine successfully set up [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf' [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been updated [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination The ovirt webadmin is accessible, but my hosted_engine_1 status failed. I tried to activate it inside the webadmin, but it say's Error while executing action: hosted_engine_1: - Cannot activate Host. Host has no unique id. and when I try to reinstall it on the webadmin, nothing happen it still failed status. I hope you can help me. Please see attach for screenshot. Thanks in advance. sandvik On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin agustinsand...@gmail.com wrote: Hi guys, First of all I want to thank you for replying my email. @Chou, yes I can access the engine webadmin. @Chao, I've tried the no. 1 option and it worked, when
Re: [ovirt-users] 答复: Engine is still unreachable
Hi, The repo that I have use if http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm from this documentation http://www.ovirt.org/Quick_Start_Guide, because the repo that this documentation http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ seems not working, http://ovirt.org/releases/ovirt-release.noarch.rpm sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm -- This article originally appeared on community.redhat.com. Follow the community on Twitter at @redhatopen https://twitter.com/redhatopen, and find us on Facebook https://www.facebook.com/redhatopen and Google+ https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts . sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm -- This article originally appeared on community.redhat.com. Follow the community on Twitter at @redhatopen https://twitter.com/redhatopen, and find us on Facebook https://www.facebook.com/redhatopen and Google+ https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts . sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm -- This article originally appeared on community.redhat.com. Follow the community on Twitter at @redhatopen https://twitter.com/redhatopen, and find us on Facebook https://www.facebook.com/redhatopen and Google+ https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts . On Fri, Nov 21, 2014 at 1:51 PM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik I have read the engine.log, it shows: Cannot find a valid baseurl for repo: base can you show me your repo? 2014-11-21 12:21 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi, I'm sorry I forgot, here's the attachement. On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin agustinsand...@gmail.com wrote: Hi, I'm sorry I forgot, here's the attachement. On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik maybe you forgot to attach your log~ that's ovirt-hosted-engine-setup, so you can also attach your setup log:-) 2014-11-21 11:11 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi users, Chou, here's my I already tried your suggestion right now, but it still failed, here's my engine.log and vdsm.log. and one more thing, since the time that I started the installation of ovirt-hosted-engine setup, I starting to have this kind of error message on my /var/log/message. Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Thanks in advance Sandvik On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik it's just a suggestion:-) i think you can have a try, as i don't know my solution worked or not. maybe there are some other people who have encountered this problem before and they can give you some advice:-) 2014-11-20 22:35 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com : HI Chou, Thanks, I will try your solution now, and should I resend this email to users@ovirt.org? Thanks Sandvik On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou coffee@gmail.com wrote: Hi, Sandvik and please don't send the email to me only but to user mail list, so everybody can help you :-) 2014-11-20 9:17 GMT+08:00 Coffee Chou coffee@gmail.com: Hi, Sandvik i can see the ERROR message: Command returned failure code 1 during SSH session you can try these: 1. stop firewall on the hosted_engine_1 2. running command: vdsm-tool configure if it's still failure, please attach your engine.log and vdsm.log 2014-11-20 7:55 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi Chou, I have successfully install the hosted engine, but at the end of the installation I have this kind of error message To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM
Re: [ovirt-users] 答复: Engine is still unreachable
Hi users, chou, Here's the output of the command cat /etc/yum.repos.d/ cat: /etc/yum.repos.d/: Is a directory cat /etc/yum.repos.d/* # CentOS-Base.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base mirrorlist= http://mirrorlist.centos.org/?release=$releaseverarch=$basearchrepo=osinfra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #released updates [updates] name=CentOS-$releasever - Updates mirrorlist= http://mirrorlist.centos.org/?release=$releaseverarch=$basearchrepo=updatesinfra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #additional packages that may be useful [extras] name=CentOS-$releasever - Extras mirrorlist= http://mirrorlist.centos.org/?release=$releaseverarch=$basearchrepo=extrasinfra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus mirrorlist= http://mirrorlist.centos.org/?release=$releaseverarch=$basearchrepo=centosplusinfra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #contrib - packages by Centos Users [contrib] name=CentOS-$releasever - Contrib mirrorlist= http://mirrorlist.centos.org/?release=$releaseverarch=$basearchrepo=contribinfra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 # CentOS-Debug.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # All debug packages from all the various CentOS-5 releases # are merged into a single repo, split by BaseArch # # Note: packages in the debuginfo repo are currently not signed # [base-debuginfo] name=CentOS-6 - Debuginfo baseurl=http://debuginfo.centos.org/6/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-6 enabled=0 [fasttrack] name=CentOS-6 - fasttrack mirrorlist= http://mirrorlist.centos.org/?release=$releaseverarch=$basearchrepo=fasttrackinfra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 # CentOS-Media.repo # # This repo can be used with mounted DVD media, verify the mount point for # CentOS-6. You can use this repo and yum to install items directly off the # DVD ISO that we release. # # To use this repo, put in your DVD and use it with the other repos too: # yum --enablerepo=c6-media [command] # # or for ONLY the media repo, do this: # # yum --disablerepo=\* --enablerepo=c6-media [command] [c6-media] name=CentOS-$releasever - Media baseurl=file:///media/CentOS/ file:///media/cdrom/ file:///media/cdrecorder/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 # CentOS-Vault.repo # # CentOS Vault holds packages from previous releases within the same CentOS Version # these are packages obsoleted by the current release and should usually not # be used in production #- [C6.0-base] name=CentOS-6.0 - Base baseurl=http://vault.centos.org/6.0/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.0-updates] name=CentOS-6.0 - Updates baseurl=http://vault.centos.org/6.0/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.0-extras] name=CentOS-6.0 - Extras baseurl=http://vault.centos.org/6.0/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.0-contrib] name=CentOS-6.0 - Contrib baseurl=http://vault.centos.org/6.0/contrib/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.0-centosplus] name=CentOS-6.0 - CentOSPlus baseurl=http://vault.centos.org/6.0/centosplus/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 #- [C6.1-base] name=CentOS-6.1 - Base baseurl=http://vault.centos.org/6.1/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.1-updates] name=CentOS-6.1 - Updates
Re: [ovirt-users] 答复: Engine is still unreachable
Hi, Chao You may make a mistake, that's not my setup :-) But i don't think it's a problem of password. If the passwords were not the same, it will throw an ERROR of: [ ERROR ] Cannot automatically add the host to cluster None: HTTP Status 401 [ ERROR ] Failed to execute stage 'Closing up': Cannot add the host to cluster None so, i guess, maybe Sandvik's setup is still not accessable ? 2014-11-19 11:12 GMT+08:00 Xie, Chao xiec.f...@cn.fujitsu.com: Hi, Chou It seems your rhevm is not setup successfully. I suggest you can think about the two possible root cause below: 1. your /etc/hosts about host/rhevm-vm is configured correctly? 2. your password set in hosted-engine –deploy and rhevm-setup is same ? If those are not your problem cause, Please provide more log about it. *发件人:* users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *代表 *Coffee Chou *发送时间:* 2014年11月19日 10:08 *收件人:* Sandvik Agustin *抄送:* users@ovirt.org *主题:* Re: [ovirt-users] Engine is still unreachable Hi, can you access Engine webadmin with this ERROR message? 2014-11-18 19:45 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi!, I have install ovirt 3.4 on centos 6.6 following this documentation http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ I have already completed the installation of ovirt engine inside of the vm, when going back to hosted-engine --deploy terminal and choosing 1 the hosted-engine --deploy says: (1, 2, 3)[1]: 1 [ ERROR ] Engine is still unreachable Engine health status page is not yet reachable. To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM (3) Abort setup what should I do? how to fix this? Thanks in advance, sandvik ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
