Ok, didn't read the doc properly, now it works as expected. Sorry for the
noise!
2016-09-21 15:55 GMT+02:00 Davide Ferrari :
> Ok, just saw that if I go to
>
> Networks -> br20 -> Hosts -> Unattached -> right click on vm04 -> setup
> host networks
>
> But there I cannot see the bond0.20 interfac
Ok, just saw that if I go to
Networks -> br20 -> Hosts -> Unattached -> right click on vm04 -> setup
host networks
But there I cannot see the bond0.20 interface, just bond0 and bond1
2016-09-21 15:08 GMT+02:00 Davide Ferrari :
> By the way, what are the exact steps to add a new network in oVir
By the way, what are the exact steps to add a new network in oVirt?
Because I was following this guide
https://www.ovirt.org/documentation/how-to/networking/bonding-vlan-bridge/
that basically explains how to create manually a standard bond+vlan+bridge,
that I already did on my ovirt hosts, but I
On Tue, Sep 20, 2016 at 12:13 PM, Maxence Sartiaux wrote:
> Okay, i found a workaround.
>
> - Create empty ifcfg-lan on all hosts (touch /etc/sysconfig/network-
> scripts/ifcfg-lan)
> - Assign the bridge to the bond (Ovirt only add MTU=1500 in the file)
> - Unassign the bridge (Ovirt rewrite the
Okay, i found a workaround.
- Create empty ifcfg-lan on all hosts (touch /etc/sysconfig/network-
scripts/ifcfg-lan)
- Assign the bridge to the bond (Ovirt only add MTU=1500 in the file)
- Unassign the bridge (Ovirt rewrite the bond configuration files)
- Re-assign the bridge on the bond
- yay it w
I configured the bond manually by editing the ifcfg file like i did in
my old install on ovirt 3.6 and 4.0
the only ifcfg file i have are the 4 for the physical interfaces, two
for the bonds and one for the ovirtmgmt bridge.
I'll send the vdsm log later.
On Mon, 2016-09-19 at 10:14 -0400, France
- Original Message -
> From: "Maxence Sartiaux"
> To: "users"
> Sent: Monday, September 19, 2016 11:53:12 AM
> Subject: [ovirt-users] Can't add logical network
> Hello,
> On a clean install ovirt 4.0.3-1, i've configured my bond on my hypervisor,
> created a new network on the engine a
Hi Maxence,
It seems much more likely that the problem is on the hypervisor side.
How did you configure the bond? With initscripts, with NetworkManager
directly, or indirectly through Cockpit?
What files are in /etc/sysconfig/network-scripts on the hypervisor? An
sosreport would be useful he
8 matches
Mail list logo