Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-31 Thread Eli Mesika


- Original Message -
> From: "Amador Pahim" <apa...@redhat.com>
> To: "Eli Mesika" <emes...@redhat.com>, "Marcelo Leandro" 
> <marcelol...@gmail.com>
> Cc: "Martin Perina" <mper...@redhat.com>, "Moti Asayag" <masa...@redhat.com>, 
> "Allon Mureinik" <amure...@redhat.com>,
> "users" <users@ovirt.org>
> Sent: Thursday, January 28, 2016 6:18:33 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> On 01/28/2016 01:59 PM, Eli Mesika wrote:
> >
> > - Original Message -
> >> From: "Marcelo Leandro" <marcelol...@gmail.com>
> >> To: "Amador Pahim" <apa...@redhat.com>
> >> Cc: "Eli Mesika" <emes...@redhat.com>, "Martin Perina"
> >> <mper...@redhat.com>, "Moti Asayag" <masa...@redhat.com>,
> >> "Allon Mureinik" <amure...@redhat.com>, "users" <users@ovirt.org>
> >> Sent: Thursday, January 28, 2016 1:39:49 PM
> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>
> >> Hello,
> >> Yes i can.
> >>
> >> It's here:
> >> https://copy.com/OmnU13SAPXh13ZiR
> > Yes
> >
> > The problem is in the command_entities table that is not cleaned up and has
> > two records after taskcleaner.sh is invoked by engine-setup
> > Since engine tries to deserialize classes defined in this table and as
> > Martin noted changes between 3.5 and 3.6 changed some classes, we got this
> > exception
> > We should not allow leftovers to exists in this table during the upgrade
> > process and taskcleaner utility should handle that as well
> > Please open a BZ on that, I will handle that
> > Meanwhile, as a workaround, run the following before the upgrade
> >
> > psql -U engine -c "DELETE from command_entities;" 
> 
> I'm afraid the upgrade was done already. Will this work after the
> upgrade? Or he's supposed to downgrade/restore env to 3.5, run the
> DELETE and then try to upgrade again? Asking 'cause It's quite a task if
> yes :)

No need to downgrade, just run the query and retry 

> 
> >
> >
> >
> >> Thanks.
> >>
> >> 2016-01-28 8:17 GMT-03:00 Amador Pahim <apa...@redhat.com>:
> >>> On 01/28/2016 09:10 AM, Eli Mesika wrote:
> >>>>
> >>>> - Original Message -
> >>>>> From: "Martin Perina" <mper...@redhat.com>
> >>>>> To: "Eli Mesika" <emes...@redhat.com>
> >>>>> Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> >>>>> <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
> >>>>> Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
> >>>>> Sent: Thursday, January 28, 2016 12:59:02 PM
> >>>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>>>>
> >>>>>
> >>>>>
> >>>>> - Original Message -
> >>>>>> From: "Eli Mesika" <emes...@redhat.com>
> >>>>>> To: "Martin Perina" <mper...@redhat.com>
> >>>>>> Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> >>>>>> <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
> >>>>>> Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
> >>>>>> Sent: Thursday, January 28, 2016 11:55:56 AM
> >>>>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> - Original Message -
> >>>>>>> From: "Martin Perina" <mper...@redhat.com>
> >>>>>>> To: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> >>>>>>> <amure...@redhat.com>
> >>>>>>> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
> >>>>>>> "Amador
> >>>>>>> Pahim" <apa...@redhat.com>, "Marcelo
> >>>>>>> Leandro" <marcelol...@gmai

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-28 Thread Amador Pahim

On 01/28/2016 01:59 PM, Eli Mesika wrote:


- Original Message -

From: "Marcelo Leandro" <marcelol...@gmail.com>
To: "Amador Pahim" <apa...@redhat.com>
Cc: "Eli Mesika" <emes...@redhat.com>, "Martin Perina" <mper...@redhat.com>, "Moti 
Asayag" <masa...@redhat.com>,
"Allon Mureinik" <amure...@redhat.com>, "users" <users@ovirt.org>
Sent: Thursday, January 28, 2016 1:39:49 PM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

Hello,
Yes i can.

It's here:
https://copy.com/OmnU13SAPXh13ZiR

Yes

The problem is in the command_entities table that is not cleaned up and has two 
records after taskcleaner.sh is invoked by engine-setup
Since engine tries to deserialize classes defined in this table and as Martin 
noted changes between 3.5 and 3.6 changed some classes, we got this exception
We should not allow leftovers to exists in this table during the upgrade 
process and taskcleaner utility should handle that as well
Please open a BZ on that, I will handle that
Meanwhile, as a workaround, run the following before the upgrade

psql -U engine -c "DELETE from command_entities;" 


I'm afraid the upgrade was done already. Will this work after the 
upgrade? Or he's supposed to downgrade/restore env to 3.5, run the 
DELETE and then try to upgrade again? Asking 'cause It's quite a task if 
yes :)







Thanks.

2016-01-28 8:17 GMT-03:00 Amador Pahim <apa...@redhat.com>:

On 01/28/2016 09:10 AM, Eli Mesika wrote:


- Original Message -

From: "Martin Perina" <mper...@redhat.com>
To: "Eli Mesika" <emes...@redhat.com>
Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
<amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
Sent: Thursday, January 28, 2016 12:59:02 PM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6



- Original Message -

From: "Eli Mesika" <emes...@redhat.com>
To: "Martin Perina" <mper...@redhat.com>
Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
<amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
Sent: Thursday, January 28, 2016 11:55:56 AM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6



----- Original Message -

From: "Martin Perina" <mper...@redhat.com>
To: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
<amure...@redhat.com>
Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
"Amador
Pahim" <apa...@redhat.com>, "Marcelo
Leandro" <marcelol...@gmail.com>
Sent: Wednesday, January 27, 2016 2:31:20 PM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

So now I finally understand the issue:

When you try to login, CommandBase tries to execute LoginCommand, but
before the command execution it loads content of commands cache and
here comes the issue: there's stored AddVmFromSnapshotCommand which
contains DiskImage as a parameter and DiskImage implementation has
changed between 3.5 and 3.6.

Moti, is there some way how to clean up commands cache so it doesn't
contain those 3.5 commands?

Also should those situation be covered during engine upgrades?

Martin, is this a left over in the command_entities table that caused
the
failure while the entity is deserialized ?

Probably, because this DiskImage.Id serialization exception started to
appear
after upgrade from 3.5. Is there any way how to verify and clean up?

I suggest having a bug on the taskcleaner code which is called upon
upgrade, then I will try to reproduce
Amador, Is there a chance we can get a backup of that 3.5 DB in order to
reproduce ?


Yes, I was talking to Marcelo off-list and he has the dump taken by
engine-setup. Marcelo, could you send the tar.gz'ed 3.5 dump download link
off-list to Eli?
Thank you.



Thanks

Martin


- Original Message -

From: "Marcelo Leandro" <marcelol...@gmail.com>
To: "Martin Perina" <mper...@redhat.com>
Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
"Amador
Pahim" <apa...@redhat.com>
Sent: Wednesday, January 27, 2016 1:08:19 PM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

The server  just in time  isolate from the network,is it a problem?
thats ok?

follows the logs:

server.log:
https://copy.com/Eni9adZSCjyMZNFN

engine.log:
https://copy.com/ayczW9ipHdW4BWni

2016-01-27 5:32 GMT-03:00 Martin Perina <mper...@redhat.com>:

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-28 Thread Eli Mesika


- Original Message -
> From: "Marcelo Leandro" <marcelol...@gmail.com>
> To: "Amador Pahim" <apa...@redhat.com>
> Cc: "Eli Mesika" <emes...@redhat.com>, "Martin Perina" <mper...@redhat.com>, 
> "Moti Asayag" <masa...@redhat.com>,
> "Allon Mureinik" <amure...@redhat.com>, "users" <users@ovirt.org>
> Sent: Thursday, January 28, 2016 1:39:49 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> Hello,
> Yes i can.
> 
> It's here:
> https://copy.com/OmnU13SAPXh13ZiR

Yes 

The problem is in the command_entities table that is not cleaned up and has two 
records after taskcleaner.sh is invoked by engine-setup
Since engine tries to deserialize classes defined in this table and as Martin 
noted changes between 3.5 and 3.6 changed some classes, we got this exception
We should not allow leftovers to exists in this table during the upgrade 
process and taskcleaner utility should handle that as well
Please open a BZ on that, I will handle that 
Meanwhile, as a workaround, run the following before the upgrade 

psql -U engine -c "DELETE from command_entities;" 



> 
> Thanks.
> 
> 2016-01-28 8:17 GMT-03:00 Amador Pahim <apa...@redhat.com>:
> > On 01/28/2016 09:10 AM, Eli Mesika wrote:
> >>
> >>
> >> - Original Message -
> >>>
> >>> From: "Martin Perina" <mper...@redhat.com>
> >>> To: "Eli Mesika" <emes...@redhat.com>
> >>> Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> >>> <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
> >>> Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
> >>> Sent: Thursday, January 28, 2016 12:59:02 PM
> >>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>>
> >>>
> >>>
> >>> - Original Message -
> >>>>
> >>>> From: "Eli Mesika" <emes...@redhat.com>
> >>>> To: "Martin Perina" <mper...@redhat.com>
> >>>> Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> >>>> <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
> >>>> Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
> >>>> Sent: Thursday, January 28, 2016 11:55:56 AM
> >>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>>>
> >>>>
> >>>>
> >>>> - Original Message -
> >>>>>
> >>>>> From: "Martin Perina" <mper...@redhat.com>
> >>>>> To: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> >>>>> <amure...@redhat.com>
> >>>>> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
> >>>>> "Amador
> >>>>> Pahim" <apa...@redhat.com>, "Marcelo
> >>>>> Leandro" <marcelol...@gmail.com>
> >>>>> Sent: Wednesday, January 27, 2016 2:31:20 PM
> >>>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>>>>
> >>>>> So now I finally understand the issue:
> >>>>>
> >>>>> When you try to login, CommandBase tries to execute LoginCommand, but
> >>>>> before the command execution it loads content of commands cache and
> >>>>> here comes the issue: there's stored AddVmFromSnapshotCommand which
> >>>>> contains DiskImage as a parameter and DiskImage implementation has
> >>>>> changed between 3.5 and 3.6.
> >>>>>
> >>>>> Moti, is there some way how to clean up commands cache so it doesn't
> >>>>> contain those 3.5 commands?
> >>>>>
> >>>>> Also should those situation be covered during engine upgrades?
> >>>>
> >>>> Martin, is this a left over in the command_entities table that caused
> >>>> the
> >>>> failure while the entity is deserialized ?
> >>>
> >>> Probably, because this DiskImage.Id serialization exception started to
> >>> appear
> >>> after upgrade from 3.5. Is there any way

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-28 Thread Eli Mesika


- Original Message -
> From: "Martin Perina" <mper...@redhat.com>
> To: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik" <amure...@redhat.com>
> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador 
> Pahim" <apa...@redhat.com>, "Marcelo
> Leandro" <marcelol...@gmail.com>
> Sent: Wednesday, January 27, 2016 2:31:20 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> So now I finally understand the issue:
> 
> When you try to login, CommandBase tries to execute LoginCommand, but
> before the command execution it loads content of commands cache and
> here comes the issue: there's stored AddVmFromSnapshotCommand which
> contains DiskImage as a parameter and DiskImage implementation has
> changed between 3.5 and 3.6.
> 
> Moti, is there some way how to clean up commands cache so it doesn't
> contain those 3.5 commands?
> 
> Also should those situation be covered during engine upgrades?

Martin, is this a left over in the command_entities table that caused the 
failure while the entity is deserialized ?

> 
> Thanks
> 
> Martin
> 
> 
> - Original Message -
> > From: "Marcelo Leandro" <marcelol...@gmail.com>
> > To: "Martin Perina" <mper...@redhat.com>
> > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
> > Pahim" <apa...@redhat.com>
> > Sent: Wednesday, January 27, 2016 1:08:19 PM
> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > 
> > The server  just in time  isolate from the network,is it a problem?
> > thats ok?
> > 
> > follows the logs:
> > 
> > server.log:
> > https://copy.com/Eni9adZSCjyMZNFN
> > 
> > engine.log:
> > https://copy.com/ayczW9ipHdW4BWni
> > 
> > 2016-01-27 5:32 GMT-03:00 Martin Perina <mper...@redhat.com>:
> > > Hi,
> > >
> > > according to the test of login by ovirt-engine-extensions-tool you were
> > > logged in
> > > successfully, so there shouldn't be any issues logging into engine using
> > > admin@internal ...
> > >
> > > Unfortunately both engine.log and server.log ends on Jan 22th and I'd
> > > really
> > > like to see up-to-date logs.
> > >
> > > So if you still cannot login into webadmin please do following:
> > >
> > > 1. Stop engine service
> > >
> > >  systemctl stop ovirt-engine
> > >
> > >or
> > >
> > >  service ovirt-engine stop
> > >
> > >
> > > 2. Rotate logs
> > >
> > >cd /var/log/ovirt-engine
> > >mv engine.log engine-20160127.log
> > >mv server.log server-20160127.log
> > >
> > >
> > > 3. Start engine
> > >
> > >  systemctl start ovirt-engine
> > >
> > >or
> > >
> > >  service ovirt-engine start
> > >
> > >
> > > 4. Try to login as admin with domain internal using webadmin
> > >
> > >
> > > 5. Try to login as admin@internal using REST API by
> > >accessing
> > >
> > >  http://SERVER/ovirt-engine/api/datacenters
> > >
> > >Into user please enter full username: admin@internal
> > >
> > >
> > > When done please attach latest server.log and engine.log
> > >
> > >
> > > Thanks a lot
> > >
> > > Martin Perina
> > >
> > >
> > > - Original Message -
> > >> From: "Marcelo Leandro" <marcelol...@gmail.com>
> > >> To: "Martin Perina" <mper...@redhat.com>
> > >> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
> > >> "Amador
> > >> Pahim" <apa...@redhat.com>
> > >> Sent: Tuesday, January 26, 2016 8:46:12 PM
> > >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > >>
> > >> hello,
> > >>
> > >> setup.log:
> > >> https://copy.com/lIYzccOnwCiW7e9q
> > >>
> > >> and output the command :
> > >> https://copy.com/7psvpyUzUq0FKW31
> > >>
> > >> error screen when i try to login on webadmin:
> > >> https://copy.com/CfKZePnGFmIwF7B8
> > >>
> > >> Thanks
> &

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-28 Thread Eli Mesika


- Original Message -
> From: "Martin Perina" <mper...@redhat.com>
> To: "Eli Mesika" <emes...@redhat.com>
> Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik" 
> <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
> Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
> Sent: Thursday, January 28, 2016 12:59:02 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> 
> 
> - Original Message -
> > From: "Eli Mesika" <emes...@redhat.com>
> > To: "Martin Perina" <mper...@redhat.com>
> > Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> > <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
> > Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
> > Sent: Thursday, January 28, 2016 11:55:56 AM
> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > 
> > 
> > 
> > - Original Message -
> > > From: "Martin Perina" <mper...@redhat.com>
> > > To: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> > > <amure...@redhat.com>
> > > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
> > > Pahim" <apa...@redhat.com>, "Marcelo
> > > Leandro" <marcelol...@gmail.com>
> > > Sent: Wednesday, January 27, 2016 2:31:20 PM
> > > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > > 
> > > So now I finally understand the issue:
> > > 
> > > When you try to login, CommandBase tries to execute LoginCommand, but
> > > before the command execution it loads content of commands cache and
> > > here comes the issue: there's stored AddVmFromSnapshotCommand which
> > > contains DiskImage as a parameter and DiskImage implementation has
> > > changed between 3.5 and 3.6.
> > > 
> > > Moti, is there some way how to clean up commands cache so it doesn't
> > > contain those 3.5 commands?
> > > 
> > > Also should those situation be covered during engine upgrades?
> > 
> > Martin, is this a left over in the command_entities table that caused the
> > failure while the entity is deserialized ?
> 
> Probably, because this DiskImage.Id serialization exception started to appear
> after upgrade from 3.5. Is there any way how to verify and clean up?

I suggest having a bug on the taskcleaner code which is called upon upgrade, 
then I will try to reproduce 
Amador, Is there a chance we can get a backup of that 3.5 DB in order to 
reproduce ?

> 
> > 
> > > 
> > > Thanks
> > > 
> > > Martin
> > > 
> > > 
> > > - Original Message -
> > > > From: "Marcelo Leandro" <marcelol...@gmail.com>
> > > > To: "Martin Perina" <mper...@redhat.com>
> > > > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
> > > > "Amador
> > > > Pahim" <apa...@redhat.com>
> > > > Sent: Wednesday, January 27, 2016 1:08:19 PM
> > > > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > > > 
> > > > The server  just in time  isolate from the network,is it a problem?
> > > > thats ok?
> > > > 
> > > > follows the logs:
> > > > 
> > > > server.log:
> > > > https://copy.com/Eni9adZSCjyMZNFN
> > > > 
> > > > engine.log:
> > > > https://copy.com/ayczW9ipHdW4BWni
> > > > 
> > > > 2016-01-27 5:32 GMT-03:00 Martin Perina <mper...@redhat.com>:
> > > > > Hi,
> > > > >
> > > > > according to the test of login by ovirt-engine-extensions-tool you
> > > > > were
> > > > > logged in
> > > > > successfully, so there shouldn't be any issues logging into engine
> > > > > using
> > > > > admin@internal ...
> > > > >
> > > > > Unfortunately both engine.log and server.log ends on Jan 22th and I'd
> > > > > really
> > > > > like to see up-to-date logs.
> > > > >
> > > > > So if you still cannot login into webadmin please do following:
> > > &g

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-28 Thread Martin Perina


- Original Message -
> From: "Eli Mesika" <emes...@redhat.com>
> To: "Martin Perina" <mper...@redhat.com>
> Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik" 
> <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
> Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
> Sent: Thursday, January 28, 2016 11:55:56 AM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> 
> 
> - Original Message -
> > From: "Martin Perina" <mper...@redhat.com>
> > To: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
> > <amure...@redhat.com>
> > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
> > Pahim" <apa...@redhat.com>, "Marcelo
> > Leandro" <marcelol...@gmail.com>
> > Sent: Wednesday, January 27, 2016 2:31:20 PM
> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > 
> > So now I finally understand the issue:
> > 
> > When you try to login, CommandBase tries to execute LoginCommand, but
> > before the command execution it loads content of commands cache and
> > here comes the issue: there's stored AddVmFromSnapshotCommand which
> > contains DiskImage as a parameter and DiskImage implementation has
> > changed between 3.5 and 3.6.
> > 
> > Moti, is there some way how to clean up commands cache so it doesn't
> > contain those 3.5 commands?
> > 
> > Also should those situation be covered during engine upgrades?
> 
> Martin, is this a left over in the command_entities table that caused the
> failure while the entity is deserialized ?

Probably, because this DiskImage.Id serialization exception started to appear
after upgrade from 3.5. Is there any way how to verify and clean up?

> 
> > 
> > Thanks
> > 
> > Martin
> > 
> > 
> > - Original Message -
> > > From: "Marcelo Leandro" <marcelol...@gmail.com>
> > > To: "Martin Perina" <mper...@redhat.com>
> > > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
> > > Pahim" <apa...@redhat.com>
> > > Sent: Wednesday, January 27, 2016 1:08:19 PM
> > > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > > 
> > > The server  just in time  isolate from the network,is it a problem?
> > > thats ok?
> > > 
> > > follows the logs:
> > > 
> > > server.log:
> > > https://copy.com/Eni9adZSCjyMZNFN
> > > 
> > > engine.log:
> > > https://copy.com/ayczW9ipHdW4BWni
> > > 
> > > 2016-01-27 5:32 GMT-03:00 Martin Perina <mper...@redhat.com>:
> > > > Hi,
> > > >
> > > > according to the test of login by ovirt-engine-extensions-tool you were
> > > > logged in
> > > > successfully, so there shouldn't be any issues logging into engine
> > > > using
> > > > admin@internal ...
> > > >
> > > > Unfortunately both engine.log and server.log ends on Jan 22th and I'd
> > > > really
> > > > like to see up-to-date logs.
> > > >
> > > > So if you still cannot login into webadmin please do following:
> > > >
> > > > 1. Stop engine service
> > > >
> > > >  systemctl stop ovirt-engine
> > > >
> > > >or
> > > >
> > > >  service ovirt-engine stop
> > > >
> > > >
> > > > 2. Rotate logs
> > > >
> > > >cd /var/log/ovirt-engine
> > > >mv engine.log engine-20160127.log
> > > >    mv server.log server-20160127.log
> > > >
> > > >
> > > > 3. Start engine
> > > >
> > > >  systemctl start ovirt-engine
> > > >
> > > >or
> > > >
> > > >  service ovirt-engine start
> > > >
> > > >
> > > > 4. Try to login as admin with domain internal using webadmin
> > > >
> > > >
> > > > 5. Try to login as admin@internal using REST API by
> > > >accessing
> > > >
> > > >  http://SERVER/ovirt-engine/api/datacenters
> > > >
> > > >Into user please enter full username: admin@intern

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-28 Thread Amador Pahim

On 01/28/2016 09:10 AM, Eli Mesika wrote:


- Original Message -

From: "Martin Perina" <mper...@redhat.com>
To: "Eli Mesika" <emes...@redhat.com>
Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik" <amure...@redhat.com>, "users" 
<users@ovirt.org>, "Amador
Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
Sent: Thursday, January 28, 2016 12:59:02 PM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6



- Original Message -

From: "Eli Mesika" <emes...@redhat.com>
To: "Martin Perina" <mper...@redhat.com>
Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
<amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
Sent: Thursday, January 28, 2016 11:55:56 AM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6



- Original Message -

From: "Martin Perina" <mper...@redhat.com>
To: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
<amure...@redhat.com>
Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
Pahim" <apa...@redhat.com>, "Marcelo
Leandro" <marcelol...@gmail.com>
Sent: Wednesday, January 27, 2016 2:31:20 PM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

So now I finally understand the issue:

When you try to login, CommandBase tries to execute LoginCommand, but
before the command execution it loads content of commands cache and
here comes the issue: there's stored AddVmFromSnapshotCommand which
contains DiskImage as a parameter and DiskImage implementation has
changed between 3.5 and 3.6.

Moti, is there some way how to clean up commands cache so it doesn't
contain those 3.5 commands?

Also should those situation be covered during engine upgrades?

Martin, is this a left over in the command_entities table that caused the
failure while the entity is deserialized ?

Probably, because this DiskImage.Id serialization exception started to appear
after upgrade from 3.5. Is there any way how to verify and clean up?

I suggest having a bug on the taskcleaner code which is called upon upgrade, 
then I will try to reproduce
Amador, Is there a chance we can get a backup of that 3.5 DB in order to 
reproduce ?


Yes, I was talking to Marcelo off-list and he has the dump taken by 
engine-setup. Marcelo, could you send the tar.gz'ed 3.5 dump download 
link off-list to Eli?

Thank you.




Thanks

Martin


- Original Message -

From: "Marcelo Leandro" <marcelol...@gmail.com>
To: "Martin Perina" <mper...@redhat.com>
Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
"Amador
Pahim" <apa...@redhat.com>
Sent: Wednesday, January 27, 2016 1:08:19 PM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

The server  just in time  isolate from the network,is it a problem?
thats ok?

follows the logs:

server.log:
https://copy.com/Eni9adZSCjyMZNFN

engine.log:
https://copy.com/ayczW9ipHdW4BWni

2016-01-27 5:32 GMT-03:00 Martin Perina <mper...@redhat.com>:

Hi,

according to the test of login by ovirt-engine-extensions-tool you
were
logged in
successfully, so there shouldn't be any issues logging into engine
using
admin@internal ...

Unfortunately both engine.log and server.log ends on Jan 22th and I'd
really
like to see up-to-date logs.

So if you still cannot login into webadmin please do following:

1. Stop engine service

  systemctl stop ovirt-engine

or

  service ovirt-engine stop


2. Rotate logs

cd /var/log/ovirt-engine
mv engine.log engine-20160127.log
mv server.log server-20160127.log


3. Start engine

  systemctl start ovirt-engine

or

  service ovirt-engine start


4. Try to login as admin with domain internal using webadmin


5. Try to login as admin@internal using REST API by
accessing

  http://SERVER/ovirt-engine/api/datacenters

    Into user please enter full username: admin@internal


When done please attach latest server.log and engine.log


Thanks a lot

Martin Perina


- Original Message -

From: "Marcelo Leandro" <marcelol...@gmail.com>
To: "Martin Perina" <mper...@redhat.com>
Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
"Amador
Pahim" <apa...@redhat.com>
Sent: Tuesday, January 26, 2016 8:46:12 PM
Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to
3.6

hello,

setup.log:
https://copy.com/lIYzccOnwCiW7e9q

and output the command :
https://copy.com/7psvpyUzUq0FKW31

error scre

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-28 Thread Marcelo Leandro
Hello,
Yes i can.

It's here:
https://copy.com/OmnU13SAPXh13ZiR

Thanks.

2016-01-28 8:17 GMT-03:00 Amador Pahim <apa...@redhat.com>:
> On 01/28/2016 09:10 AM, Eli Mesika wrote:
>>
>>
>> - Original Message -
>>>
>>> From: "Martin Perina" <mper...@redhat.com>
>>> To: "Eli Mesika" <emes...@redhat.com>
>>> Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
>>> <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
>>> Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
>>> Sent: Thursday, January 28, 2016 12:59:02 PM
>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>>
>>>
>>>
>>> - Original Message -
>>>>
>>>> From: "Eli Mesika" <emes...@redhat.com>
>>>> To: "Martin Perina" <mper...@redhat.com>
>>>> Cc: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
>>>> <amure...@redhat.com>, "users" <users@ovirt.org>, "Amador
>>>> Pahim" <apa...@redhat.com>, "Marcelo Leandro" <marcelol...@gmail.com>
>>>> Sent: Thursday, January 28, 2016 11:55:56 AM
>>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>>>
>>>>
>>>>
>>>> - Original Message -
>>>>>
>>>>> From: "Martin Perina" <mper...@redhat.com>
>>>>> To: "Moti Asayag" <masa...@redhat.com>, "Allon Mureinik"
>>>>> <amure...@redhat.com>
>>>>> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
>>>>> "Amador
>>>>> Pahim" <apa...@redhat.com>, "Marcelo
>>>>> Leandro" <marcelol...@gmail.com>
>>>>> Sent: Wednesday, January 27, 2016 2:31:20 PM
>>>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>>>>
>>>>> So now I finally understand the issue:
>>>>>
>>>>> When you try to login, CommandBase tries to execute LoginCommand, but
>>>>> before the command execution it loads content of commands cache and
>>>>> here comes the issue: there's stored AddVmFromSnapshotCommand which
>>>>> contains DiskImage as a parameter and DiskImage implementation has
>>>>> changed between 3.5 and 3.6.
>>>>>
>>>>> Moti, is there some way how to clean up commands cache so it doesn't
>>>>> contain those 3.5 commands?
>>>>>
>>>>> Also should those situation be covered during engine upgrades?
>>>>
>>>> Martin, is this a left over in the command_entities table that caused
>>>> the
>>>> failure while the entity is deserialized ?
>>>
>>> Probably, because this DiskImage.Id serialization exception started to
>>> appear
>>> after upgrade from 3.5. Is there any way how to verify and clean up?
>>
>> I suggest having a bug on the taskcleaner code which is called upon
>> upgrade, then I will try to reproduce
>> Amador, Is there a chance we can get a backup of that 3.5 DB in order to
>> reproduce ?
>
>
> Yes, I was talking to Marcelo off-list and he has the dump taken by
> engine-setup. Marcelo, could you send the tar.gz'ed 3.5 dump download link
> off-list to Eli?
> Thank you.
>
>
>>
>>>>> Thanks
>>>>>
>>>>> Martin
>>>>>
>>>>>
>>>>> - Original Message -
>>>>>>
>>>>>> From: "Marcelo Leandro" <marcelol...@gmail.com>
>>>>>> To: "Martin Perina" <mper...@redhat.com>
>>>>>> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
>>>>>> "Amador
>>>>>> Pahim" <apa...@redhat.com>
>>>>>> Sent: Wednesday, January 27, 2016 1:08:19 PM
>>>>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>>>>>
>>>>>> The server  just in time  isolate from the network,is it a problem?
>>>>>> thats ok?
>>>>>>
>>>>>> follows the logs:
>>>>>>
>>>>>> serve

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-27 Thread Marcelo Leandro
The server  just in time  isolate from the network,is it a problem?
thats ok?

follows the logs:

server.log:
https://copy.com/Eni9adZSCjyMZNFN

engine.log:
https://copy.com/ayczW9ipHdW4BWni

2016-01-27 5:32 GMT-03:00 Martin Perina <mper...@redhat.com>:
> Hi,
>
> according to the test of login by ovirt-engine-extensions-tool you were 
> logged in
> successfully, so there shouldn't be any issues logging into engine using
> admin@internal ...
>
> Unfortunately both engine.log and server.log ends on Jan 22th and I'd really
> like to see up-to-date logs.
>
> So if you still cannot login into webadmin please do following:
>
> 1. Stop engine service
>
>  systemctl stop ovirt-engine
>
>or
>
>  service ovirt-engine stop
>
>
> 2. Rotate logs
>
>cd /var/log/ovirt-engine
>mv engine.log engine-20160127.log
>mv server.log server-20160127.log
>
>
> 3. Start engine
>
>  systemctl start ovirt-engine
>
>or
>
>  service ovirt-engine start
>
>
> 4. Try to login as admin with domain internal using webadmin
>
>
> 5. Try to login as admin@internal using REST API by
>accessing
>
>  http://SERVER/ovirt-engine/api/datacenters
>
>Into user please enter full username: admin@internal
>
>
> When done please attach latest server.log and engine.log
>
>
> Thanks a lot
>
> Martin Perina
>
>
> - Original Message -
>> From: "Marcelo Leandro" <marcelol...@gmail.com>
>> To: "Martin Perina" <mper...@redhat.com>
>> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador 
>> Pahim" <apa...@redhat.com>
>> Sent: Tuesday, January 26, 2016 8:46:12 PM
>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>
>> hello,
>>
>> setup.log:
>> https://copy.com/lIYzccOnwCiW7e9q
>>
>> and output the command :
>> https://copy.com/7psvpyUzUq0FKW31
>>
>> error screen when i try to login on webadmin:
>> https://copy.com/CfKZePnGFmIwF7B8
>>
>> Thanks
>>
>> 2016-01-26 12:24 GMT-03:00 Martin Perina <mper...@redhat.com>:
>> > And also could you try to login using extension test tool:
>> >
>> >   ovirt-engine-extensions-tool aaa login-user --profile=internal
>> >   --user-name=admin --password=interactive:
>> >
>> > and post the output of the command.
>> >
>> > Thanks a lot
>> >
>> > Martin Perina
>> >
>> > - Original Message -
>> >> From: "Martin Perina" <mper...@redhat.com>
>> >> To: "Marcelo Leandro" <marcelol...@gmail.com>
>> >> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
>> >> Pahim" <apa...@redhat.com>
>> >> Sent: Tuesday, January 26, 2016 4:12:21 PM
>> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>> >>
>> >> Could you please share also your server.log?
>> >>
>> >> Thanks
>> >>
>> >> Martin Perina
>> >>
>> >> - Original Message -
>> >> > From: "Marcelo Leandro" <marcelol...@gmail.com>
>> >> > To: "Martin Perina" <mper...@redhat.com>
>> >> > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
>> >> > "Amador
>> >> > Pahim" <apa...@redhat.com>
>> >> > Sent: Tuesday, January 26, 2016 4:03:16 PM
>> >> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>> >> >
>> >> > And here the engine.log:
>> >> > https://copy.com/TWjgIu7KwSkcmRZ8
>> >> >
>> >> > the log started 2016-01-19.
>> >> >
>> >> > 2016-01-26 11:57 GMT-03:00 Marcelo Leandro <marcelol...@gmail.com>:
>> >> > > I didn't change nothing on jan 20th and it happened on 22th.
>> >> > > I can't login into the web admin.
>> >> > >
>> >> > > Thanks
>> >> > >
>> >> > > 2016-01-26 9:55 GMT-03:00 Martin Perina <mper...@redhat.com>:
>> >> > >> Hi Marcelo,
>> >> > >>
>> >> > >> sorry for late response, too many tasks on me at the moment :-(
>> >> > >>
>> >> > >> As Eli said important is

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-27 Thread Martin Perina
Hi,

according to the test of login by ovirt-engine-extensions-tool you were logged 
in
successfully, so there shouldn't be any issues logging into engine using
admin@internal ...

Unfortunately both engine.log and server.log ends on Jan 22th and I'd really
like to see up-to-date logs.

So if you still cannot login into webadmin please do following:

1. Stop engine service

 systemctl stop ovirt-engine

   or

 service ovirt-engine stop


2. Rotate logs

   cd /var/log/ovirt-engine
   mv engine.log engine-20160127.log
   mv server.log server-20160127.log


3. Start engine

 systemctl start ovirt-engine

   or

 service ovirt-engine start


4. Try to login as admin with domain internal using webadmin


5. Try to login as admin@internal using REST API by
   accessing 

 http://SERVER/ovirt-engine/api/datacenters

   Into user please enter full username: admin@internal


When done please attach latest server.log and engine.log


Thanks a lot

Martin Perina


- Original Message -
> From: "Marcelo Leandro" <marcelol...@gmail.com>
> To: "Martin Perina" <mper...@redhat.com>
> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador 
> Pahim" <apa...@redhat.com>
> Sent: Tuesday, January 26, 2016 8:46:12 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> hello,
> 
> setup.log:
> https://copy.com/lIYzccOnwCiW7e9q
> 
> and output the command :
> https://copy.com/7psvpyUzUq0FKW31
> 
> error screen when i try to login on webadmin:
> https://copy.com/CfKZePnGFmIwF7B8
> 
> Thanks
> 
> 2016-01-26 12:24 GMT-03:00 Martin Perina <mper...@redhat.com>:
> > And also could you try to login using extension test tool:
> >
> >   ovirt-engine-extensions-tool aaa login-user --profile=internal
> >   --user-name=admin --password=interactive:
> >
> > and post the output of the command.
> >
> > Thanks a lot
> >
> > Martin Perina
> >
> > - Original Message -
> >> From: "Martin Perina" <mper...@redhat.com>
> >> To: "Marcelo Leandro" <marcelol...@gmail.com>
> >> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
> >> Pahim" <apa...@redhat.com>
> >> Sent: Tuesday, January 26, 2016 4:12:21 PM
> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>
> >> Could you please share also your server.log?
> >>
> >> Thanks
> >>
> >> Martin Perina
> >>
> >> - Original Message -
> >> > From: "Marcelo Leandro" <marcelol...@gmail.com>
> >> > To: "Martin Perina" <mper...@redhat.com>
> >> > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
> >> > "Amador
> >> > Pahim" <apa...@redhat.com>
> >> > Sent: Tuesday, January 26, 2016 4:03:16 PM
> >> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >> >
> >> > And here the engine.log:
> >> > https://copy.com/TWjgIu7KwSkcmRZ8
> >> >
> >> > the log started 2016-01-19.
> >> >
> >> > 2016-01-26 11:57 GMT-03:00 Marcelo Leandro <marcelol...@gmail.com>:
> >> > > I didn't change nothing on jan 20th and it happened on 22th.
> >> > > I can't login into the web admin.
> >> > >
> >> > > Thanks
> >> > >
> >> > > 2016-01-26 9:55 GMT-03:00 Martin Perina <mper...@redhat.com>:
> >> > >> Hi Marcelo,
> >> > >>
> >> > >> sorry for late response, too many tasks on me at the moment :-(
> >> > >>
> >> > >> As Eli said important issues started at 2016-01-20, but engine-setup
> >> > >> log you posted is dated at 2016-01-22. So, did you perform any
> >> > >> upgrade on important configuration changed on Jan 20th? If so could
> >> > >> you please share also this setup log?
> >> > >>
> >> > >> Regarding login: I haven't found any issue logging, I see many
> >> > >> successful
> >> > >> logins of admin@internal in the log. So are you able to login into
> >> > >> webadmin
> >> > >> or not?
> >> > >>
> >> > >> Thanks
> >> > >>
> >> > >> Martin Perina
> >> > >>
> >&

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-27 Thread Martin Perina
So now I finally understand the issue:

When you try to login, CommandBase tries to execute LoginCommand, but
before the command execution it loads content of commands cache and
here comes the issue: there's stored AddVmFromSnapshotCommand which
contains DiskImage as a parameter and DiskImage implementation has
changed between 3.5 and 3.6.

Moti, is there some way how to clean up commands cache so it doesn't
contain those 3.5 commands?

Also should those situation be covered during engine upgrades?

Thanks

Martin


- Original Message -
> From: "Marcelo Leandro" <marcelol...@gmail.com>
> To: "Martin Perina" <mper...@redhat.com>
> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador 
> Pahim" <apa...@redhat.com>
> Sent: Wednesday, January 27, 2016 1:08:19 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> The server  just in time  isolate from the network,is it a problem?
> thats ok?
> 
> follows the logs:
> 
> server.log:
> https://copy.com/Eni9adZSCjyMZNFN
> 
> engine.log:
> https://copy.com/ayczW9ipHdW4BWni
> 
> 2016-01-27 5:32 GMT-03:00 Martin Perina <mper...@redhat.com>:
> > Hi,
> >
> > according to the test of login by ovirt-engine-extensions-tool you were
> > logged in
> > successfully, so there shouldn't be any issues logging into engine using
> > admin@internal ...
> >
> > Unfortunately both engine.log and server.log ends on Jan 22th and I'd
> > really
> > like to see up-to-date logs.
> >
> > So if you still cannot login into webadmin please do following:
> >
> > 1. Stop engine service
> >
> >  systemctl stop ovirt-engine
> >
> >or
> >
> >  service ovirt-engine stop
> >
> >
> > 2. Rotate logs
> >
> >cd /var/log/ovirt-engine
> >mv engine.log engine-20160127.log
> >mv server.log server-20160127.log
> >
> >
> > 3. Start engine
> >
> >  systemctl start ovirt-engine
> >
> >or
> >
> >  service ovirt-engine start
> >
> >
> > 4. Try to login as admin with domain internal using webadmin
> >
> >
> > 5. Try to login as admin@internal using REST API by
> >accessing
> >
> >  http://SERVER/ovirt-engine/api/datacenters
> >
> >Into user please enter full username: admin@internal
> >
> >
> > When done please attach latest server.log and engine.log
> >
> >
> > Thanks a lot
> >
> > Martin Perina
> >
> >
> > - Original Message -
> >> From: "Marcelo Leandro" <marcelol...@gmail.com>
> >> To: "Martin Perina" <mper...@redhat.com>
> >> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
> >> Pahim" <apa...@redhat.com>
> >> Sent: Tuesday, January 26, 2016 8:46:12 PM
> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>
> >> hello,
> >>
> >> setup.log:
> >> https://copy.com/lIYzccOnwCiW7e9q
> >>
> >> and output the command :
> >> https://copy.com/7psvpyUzUq0FKW31
> >>
> >> error screen when i try to login on webadmin:
> >> https://copy.com/CfKZePnGFmIwF7B8
> >>
> >> Thanks
> >>
> >> 2016-01-26 12:24 GMT-03:00 Martin Perina <mper...@redhat.com>:
> >> > And also could you try to login using extension test tool:
> >> >
> >> >   ovirt-engine-extensions-tool aaa login-user --profile=internal
> >> >   --user-name=admin --password=interactive:
> >> >
> >> > and post the output of the command.
> >> >
> >> > Thanks a lot
> >> >
> >> > Martin Perina
> >> >
> >> > ----- Original Message -
> >> >> From: "Martin Perina" <mper...@redhat.com>
> >> >> To: "Marcelo Leandro" <marcelol...@gmail.com>
> >> >> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>,
> >> >> "Amador
> >> >> Pahim" <apa...@redhat.com>
> >> >> Sent: Tuesday, January 26, 2016 4:12:21 PM
> >> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >> >>
> >> >> Could you please share also your server.log?
> >> >>
> >> >> Thanks
> >>

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-26 Thread Marcelo Leandro
Martins, can you help me ? I can't administer my environment.

2016-01-25 8:30 GMT-03:00 Eli Mesika <emes...@redhat.com>:
> Adding Martin
>
> There are some aaa errors before that, but first significant error is in 
> 2016-01-20 00:14:55,002
> Can you take a look ?
>
> - Original Message -
>> From: "Marcelo Leandro" <marcelol...@gmail.com>
>> To: "Eli Mesika" <emes...@redhat.com>
>> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
>> Sent: Sunday, January 24, 2016 1:48:04 PM
>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>
>> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
>>
>>
>> - Original Message -
>> > From: "Amador Pahim" <apa...@redhat.com>
>> > To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
>> > Cc: emes...@redhat.com
>> > Sent: Friday, January 22, 2016 7:08:20 PM
>> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>> >
>> > On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
>> > > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
>> > > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
>> > > engine.log say
>> > > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid type
>> > > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
>> > > type 'Id.class'): no such class found (through reference chain:
>> > >
>> org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
>> >
>> > hmm, I see a similar msg here:
>> > http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
>> >
>> > Not sure if related. Eli? Any thoughts here?
>>
>> I don't think it is related ...
>> Amador, can you please attach a full engine log ?
>>
>> >
>> > >
>> > > Here the setup log:
>> > > https://copy.com/YBddV8bg3tnjHnwp
>> > >
>> > > And here the engine.log:
>> > > https://copy.com/TWjgIu7KwSkcmRZ8
>> > >
>> > > Need urgent assistance. Thank you in advance.
>> > >
>> > > Best Regards,
>> > > Marcelo Leandro
>> > > ___
>> > > Users mailing list
>> > > Users@ovirt.org
>> > > http://lists.ovirt.org/mailman/listinfo/users
>> >
>> >
>>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-26 Thread Marcelo Leandro
I didn't change nothing on jan 20th and it happened on 22th.
I can't login into the web admin.

Thanks

2016-01-26 9:55 GMT-03:00 Martin Perina <mper...@redhat.com>:
> Hi Marcelo,
>
> sorry for late response, too many tasks on me at the moment :-(
>
> As Eli said important issues started at 2016-01-20, but engine-setup
> log you posted is dated at 2016-01-22. So, did you perform any
> upgrade on important configuration changed on Jan 20th? If so could
> you please share also this setup log?
>
> Regarding login: I haven't found any issue logging, I see many successful
> logins of admin@internal in the log. So are you able to login into webadmin
> or not?
>
> Thanks
>
> Martin Perina
>
> - Original Message -
>> From: "Marcelo Leandro" <marcelol...@gmail.com>
>> To: "Eli Mesika" <emes...@redhat.com>
>> Cc: "Martin Perina" <mper...@redhat.com>, "users" <users@ovirt.org>, "Amador 
>> Pahim" <apa...@redhat.com>
>> Sent: Tuesday, January 26, 2016 12:27:55 PM
>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>
>> Martins, can you help me ? I can't administer my environment.
>>
>> 2016-01-25 8:30 GMT-03:00 Eli Mesika <emes...@redhat.com>:
>> > Adding Martin
>> >
>> > There are some aaa errors before that, but first significant error is in
>> > 2016-01-20 00:14:55,002
>> > Can you take a look ?
>> >
>> > - Original Message -
>> >> From: "Marcelo Leandro" <marcelol...@gmail.com>
>> >> To: "Eli Mesika" <emes...@redhat.com>
>> >> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
>> >> Sent: Sunday, January 24, 2016 1:48:04 PM
>> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>> >>
>> >> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
>> >>
>> >>
>> >> - Original Message -
>> >> > From: "Amador Pahim" <apa...@redhat.com>
>> >> > To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
>> >> > Cc: emes...@redhat.com
>> >> > Sent: Friday, January 22, 2016 7:08:20 PM
>> >> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>> >> >
>> >> > On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
>> >> > > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
>> >> > > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
>> >> > > engine.log say
>> >> > > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid type
>> >> > > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
>> >> > > type 'Id.class'): no such class found (through reference chain:
>> >> > >
>> >> org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
>> >> >
>> >> > hmm, I see a similar msg here:
>> >> > http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
>> >> >
>> >> > Not sure if related. Eli? Any thoughts here?
>> >>
>> >> I don't think it is related ...
>> >> Amador, can you please attach a full engine log ?
>> >>
>> >> >
>> >> > >
>> >> > > Here the setup log:
>> >> > > https://copy.com/YBddV8bg3tnjHnwp
>> >> > >
>> >> > > And here the engine.log:
>> >> > > https://copy.com/TWjgIu7KwSkcmRZ8
>> >> > >
>> >> > > Need urgent assistance. Thank you in advance.
>> >> > >
>> >> > > Best Regards,
>> >> > > Marcelo Leandro
>> >> > > ___
>> >> > > Users mailing list
>> >> > > Users@ovirt.org
>> >> > > http://lists.ovirt.org/mailman/listinfo/users
>> >> >
>> >> >
>> >>
>>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-26 Thread Marcelo Leandro
And here the engine.log:
https://copy.com/TWjgIu7KwSkcmRZ8

the log started 2016-01-19.

2016-01-26 11:57 GMT-03:00 Marcelo Leandro <marcelol...@gmail.com>:
> I didn't change nothing on jan 20th and it happened on 22th.
> I can't login into the web admin.
>
> Thanks
>
> 2016-01-26 9:55 GMT-03:00 Martin Perina <mper...@redhat.com>:
>> Hi Marcelo,
>>
>> sorry for late response, too many tasks on me at the moment :-(
>>
>> As Eli said important issues started at 2016-01-20, but engine-setup
>> log you posted is dated at 2016-01-22. So, did you perform any
>> upgrade on important configuration changed on Jan 20th? If so could
>> you please share also this setup log?
>>
>> Regarding login: I haven't found any issue logging, I see many successful
>> logins of admin@internal in the log. So are you able to login into webadmin
>> or not?
>>
>> Thanks
>>
>> Martin Perina
>>
>> - Original Message -
>>> From: "Marcelo Leandro" <marcelol...@gmail.com>
>>> To: "Eli Mesika" <emes...@redhat.com>
>>> Cc: "Martin Perina" <mper...@redhat.com>, "users" <users@ovirt.org>, 
>>> "Amador Pahim" <apa...@redhat.com>
>>> Sent: Tuesday, January 26, 2016 12:27:55 PM
>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>>
>>> Martins, can you help me ? I can't administer my environment.
>>>
>>> 2016-01-25 8:30 GMT-03:00 Eli Mesika <emes...@redhat.com>:
>>> > Adding Martin
>>> >
>>> > There are some aaa errors before that, but first significant error is in
>>> > 2016-01-20 00:14:55,002
>>> > Can you take a look ?
>>> >
>>> > - Original Message -
>>> >> From: "Marcelo Leandro" <marcelol...@gmail.com>
>>> >> To: "Eli Mesika" <emes...@redhat.com>
>>> >> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
>>> >> Sent: Sunday, January 24, 2016 1:48:04 PM
>>> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>> >>
>>> >> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
>>> >>
>>> >>
>>> >> - Original Message -
>>> >> > From: "Amador Pahim" <apa...@redhat.com>
>>> >> > To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
>>> >> > Cc: emes...@redhat.com
>>> >> > Sent: Friday, January 22, 2016 7:08:20 PM
>>> >> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>> >> >
>>> >> > On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
>>> >> > > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
>>> >> > > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
>>> >> > > engine.log say
>>> >> > > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid 
>>> >> > > type
>>> >> > > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
>>> >> > > type 'Id.class'): no such class found (through reference chain:
>>> >> > >
>>> >> org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
>>> >> >
>>> >> > hmm, I see a similar msg here:
>>> >> > http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
>>> >> >
>>> >> > Not sure if related. Eli? Any thoughts here?
>>> >>
>>> >> I don't think it is related ...
>>> >> Amador, can you please attach a full engine log ?
>>> >>
>>> >> >
>>> >> > >
>>> >> > > Here the setup log:
>>> >> > > https://copy.com/YBddV8bg3tnjHnwp
>>> >> > >
>>> >> > > And here the engine.log:
>>> >> > > https://copy.com/TWjgIu7KwSkcmRZ8
>>> >> > >
>>> >> > > Need urgent assistance. Thank you in advance.
>>> >> > >
>>> >> > > Best Regards,
>>> >> > > Marcelo Leandro
>>> >> > > ___
>>> >> > > Users mailing list
>>> >> > > Users@ovirt.org
>>> >> > > http://lists.ovirt.org/mailman/listinfo/users
>>> >> >
>>> >> >
>>> >>
>>>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-26 Thread Martin Perina
Could you please share also your server.log?

Thanks

Martin Perina

- Original Message -
> From: "Marcelo Leandro" <marcelol...@gmail.com>
> To: "Martin Perina" <mper...@redhat.com>
> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador 
> Pahim" <apa...@redhat.com>
> Sent: Tuesday, January 26, 2016 4:03:16 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> And here the engine.log:
> https://copy.com/TWjgIu7KwSkcmRZ8
> 
> the log started 2016-01-19.
> 
> 2016-01-26 11:57 GMT-03:00 Marcelo Leandro <marcelol...@gmail.com>:
> > I didn't change nothing on jan 20th and it happened on 22th.
> > I can't login into the web admin.
> >
> > Thanks
> >
> > 2016-01-26 9:55 GMT-03:00 Martin Perina <mper...@redhat.com>:
> >> Hi Marcelo,
> >>
> >> sorry for late response, too many tasks on me at the moment :-(
> >>
> >> As Eli said important issues started at 2016-01-20, but engine-setup
> >> log you posted is dated at 2016-01-22. So, did you perform any
> >> upgrade on important configuration changed on Jan 20th? If so could
> >> you please share also this setup log?
> >>
> >> Regarding login: I haven't found any issue logging, I see many successful
> >> logins of admin@internal in the log. So are you able to login into
> >> webadmin
> >> or not?
> >>
> >> Thanks
> >>
> >> Martin Perina
> >>
> >> - Original Message -
> >>> From: "Marcelo Leandro" <marcelol...@gmail.com>
> >>> To: "Eli Mesika" <emes...@redhat.com>
> >>> Cc: "Martin Perina" <mper...@redhat.com>, "users" <users@ovirt.org>,
> >>> "Amador Pahim" <apa...@redhat.com>
> >>> Sent: Tuesday, January 26, 2016 12:27:55 PM
> >>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>>
> >>> Martins, can you help me ? I can't administer my environment.
> >>>
> >>> 2016-01-25 8:30 GMT-03:00 Eli Mesika <emes...@redhat.com>:
> >>> > Adding Martin
> >>> >
> >>> > There are some aaa errors before that, but first significant error is
> >>> > in
> >>> > 2016-01-20 00:14:55,002
> >>> > Can you take a look ?
> >>> >
> >>> > - Original Message -
> >>> >> From: "Marcelo Leandro" <marcelol...@gmail.com>
> >>> >> To: "Eli Mesika" <emes...@redhat.com>
> >>> >> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
> >>> >> Sent: Sunday, January 24, 2016 1:48:04 PM
> >>> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>> >>
> >>> >> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
> >>> >>
> >>> >>
> >>> >> - Original Message -
> >>> >> > From: "Amador Pahim" <apa...@redhat.com>
> >>> >> > To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
> >>> >> > Cc: emes...@redhat.com
> >>> >> > Sent: Friday, January 22, 2016 7:08:20 PM
> >>> >> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to
> >>> >> > 3.6
> >>> >> >
> >>> >> > On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
> >>> >> > > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
> >>> >> > > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore.
> >>> >> > > The
> >>> >> > > engine.log say
> >>> >> > > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid
> >>> >> > > type
> >>> >> > > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for
> >>> >> > > id
> >>> >> > > type 'Id.class'): no such class found (through reference chain:
> >>> >> > >
> >>> >> org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
> >>> >> >
> >>> >> > hmm, I see a similar msg here:
> >>> >> > http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
> >>> >> >
> >>> >> > Not sure if related. Eli? Any thoughts here?
> >>> >>
> >>> >> I don't think it is related ...
> >>> >> Amador, can you please attach a full engine log ?
> >>> >>
> >>> >> >
> >>> >> > >
> >>> >> > > Here the setup log:
> >>> >> > > https://copy.com/YBddV8bg3tnjHnwp
> >>> >> > >
> >>> >> > > And here the engine.log:
> >>> >> > > https://copy.com/TWjgIu7KwSkcmRZ8
> >>> >> > >
> >>> >> > > Need urgent assistance. Thank you in advance.
> >>> >> > >
> >>> >> > > Best Regards,
> >>> >> > > Marcelo Leandro
> >>> >> > > ___
> >>> >> > > Users mailing list
> >>> >> > > Users@ovirt.org
> >>> >> > > http://lists.ovirt.org/mailman/listinfo/users
> >>> >> >
> >>> >> >
> >>> >>
> >>>
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-26 Thread Martin Perina
And also could you try to login using extension test tool:

  ovirt-engine-extensions-tool aaa login-user --profile=internal 
--user-name=admin --password=interactive:

and post the output of the command.

Thanks a lot

Martin Perina

- Original Message -
> From: "Martin Perina" <mper...@redhat.com>
> To: "Marcelo Leandro" <marcelol...@gmail.com>
> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador 
> Pahim" <apa...@redhat.com>
> Sent: Tuesday, January 26, 2016 4:12:21 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> Could you please share also your server.log?
> 
> Thanks
> 
> Martin Perina
> 
> - Original Message -
> > From: "Marcelo Leandro" <marcelol...@gmail.com>
> > To: "Martin Perina" <mper...@redhat.com>
> > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
> > Pahim" <apa...@redhat.com>
> > Sent: Tuesday, January 26, 2016 4:03:16 PM
> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > 
> > And here the engine.log:
> > https://copy.com/TWjgIu7KwSkcmRZ8
> > 
> > the log started 2016-01-19.
> > 
> > 2016-01-26 11:57 GMT-03:00 Marcelo Leandro <marcelol...@gmail.com>:
> > > I didn't change nothing on jan 20th and it happened on 22th.
> > > I can't login into the web admin.
> > >
> > > Thanks
> > >
> > > 2016-01-26 9:55 GMT-03:00 Martin Perina <mper...@redhat.com>:
> > >> Hi Marcelo,
> > >>
> > >> sorry for late response, too many tasks on me at the moment :-(
> > >>
> > >> As Eli said important issues started at 2016-01-20, but engine-setup
> > >> log you posted is dated at 2016-01-22. So, did you perform any
> > >> upgrade on important configuration changed on Jan 20th? If so could
> > >> you please share also this setup log?
> > >>
> > >> Regarding login: I haven't found any issue logging, I see many
> > >> successful
> > >> logins of admin@internal in the log. So are you able to login into
> > >> webadmin
> > >> or not?
> > >>
> > >> Thanks
> > >>
> > >> Martin Perina
> > >>
> > >> - Original Message -
> > >>> From: "Marcelo Leandro" <marcelol...@gmail.com>
> > >>> To: "Eli Mesika" <emes...@redhat.com>
> > >>> Cc: "Martin Perina" <mper...@redhat.com>, "users" <users@ovirt.org>,
> > >>> "Amador Pahim" <apa...@redhat.com>
> > >>> Sent: Tuesday, January 26, 2016 12:27:55 PM
> > >>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > >>>
> > >>> Martins, can you help me ? I can't administer my environment.
> > >>>
> > >>> 2016-01-25 8:30 GMT-03:00 Eli Mesika <emes...@redhat.com>:
> > >>> > Adding Martin
> > >>> >
> > >>> > There are some aaa errors before that, but first significant error is
> > >>> > in
> > >>> > 2016-01-20 00:14:55,002
> > >>> > Can you take a look ?
> > >>> >
> > >>> > - Original Message -
> > >>> >> From: "Marcelo Leandro" <marcelol...@gmail.com>
> > >>> >> To: "Eli Mesika" <emes...@redhat.com>
> > >>> >> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
> > >>> >> Sent: Sunday, January 24, 2016 1:48:04 PM
> > >>> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to
> > >>> >> 3.6
> > >>> >>
> > >>> >> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
> > >>> >>
> > >>> >>
> > >>> >> - Original Message -
> > >>> >> > From: "Amador Pahim" <apa...@redhat.com>
> > >>> >> > To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
> > >>> >> > Cc: emes...@redhat.com
> > >>> >> > Sent: Friday, January 22, 2016 7:08:20 PM
> > >>> >> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-26 Thread Marcelo Leandro
hello,

setup.log:
https://copy.com/lIYzccOnwCiW7e9q

and output the command :
https://copy.com/7psvpyUzUq0FKW31

error screen when i try to login on webadmin:
https://copy.com/CfKZePnGFmIwF7B8

Thanks

2016-01-26 12:24 GMT-03:00 Martin Perina <mper...@redhat.com>:
> And also could you try to login using extension test tool:
>
>   ovirt-engine-extensions-tool aaa login-user --profile=internal 
> --user-name=admin --password=interactive:
>
> and post the output of the command.
>
> Thanks a lot
>
> Martin Perina
>
> - Original Message -
>> From: "Martin Perina" <mper...@redhat.com>
>> To: "Marcelo Leandro" <marcelol...@gmail.com>
>> Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador 
>> Pahim" <apa...@redhat.com>
>> Sent: Tuesday, January 26, 2016 4:12:21 PM
>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>
>> Could you please share also your server.log?
>>
>> Thanks
>>
>> Martin Perina
>>
>> - Original Message -
>> > From: "Marcelo Leandro" <marcelol...@gmail.com>
>> > To: "Martin Perina" <mper...@redhat.com>
>> > Cc: "Eli Mesika" <emes...@redhat.com>, "users" <users@ovirt.org>, "Amador
>> > Pahim" <apa...@redhat.com>
>> > Sent: Tuesday, January 26, 2016 4:03:16 PM
>> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>> >
>> > And here the engine.log:
>> > https://copy.com/TWjgIu7KwSkcmRZ8
>> >
>> > the log started 2016-01-19.
>> >
>> > 2016-01-26 11:57 GMT-03:00 Marcelo Leandro <marcelol...@gmail.com>:
>> > > I didn't change nothing on jan 20th and it happened on 22th.
>> > > I can't login into the web admin.
>> > >
>> > > Thanks
>> > >
>> > > 2016-01-26 9:55 GMT-03:00 Martin Perina <mper...@redhat.com>:
>> > >> Hi Marcelo,
>> > >>
>> > >> sorry for late response, too many tasks on me at the moment :-(
>> > >>
>> > >> As Eli said important issues started at 2016-01-20, but engine-setup
>> > >> log you posted is dated at 2016-01-22. So, did you perform any
>> > >> upgrade on important configuration changed on Jan 20th? If so could
>> > >> you please share also this setup log?
>> > >>
>> > >> Regarding login: I haven't found any issue logging, I see many
>> > >> successful
>> > >> logins of admin@internal in the log. So are you able to login into
>> > >> webadmin
>> > >> or not?
>> > >>
>> > >> Thanks
>> > >>
>> > >> Martin Perina
>> > >>
>> > >> - Original Message -
>> > >>> From: "Marcelo Leandro" <marcelol...@gmail.com>
>> > >>> To: "Eli Mesika" <emes...@redhat.com>
>> > >>> Cc: "Martin Perina" <mper...@redhat.com>, "users" <users@ovirt.org>,
>> > >>> "Amador Pahim" <apa...@redhat.com>
>> > >>> Sent: Tuesday, January 26, 2016 12:27:55 PM
>> > >>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>> > >>>
>> > >>> Martins, can you help me ? I can't administer my environment.
>> > >>>
>> > >>> 2016-01-25 8:30 GMT-03:00 Eli Mesika <emes...@redhat.com>:
>> > >>> > Adding Martin
>> > >>> >
>> > >>> > There are some aaa errors before that, but first significant error is
>> > >>> > in
>> > >>> > 2016-01-20 00:14:55,002
>> > >>> > Can you take a look ?
>> > >>> >
>> > >>> > - Original Message -
>> > >>> >> From: "Marcelo Leandro" <marcelol...@gmail.com>
>> > >>> >> To: "Eli Mesika" <emes...@redhat.com>
>> > >>> >> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
>> > >>> >> Sent: Sunday, January 24, 2016 1:48:04 PM
>> > >>> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to
>> > >>> >> 3.6
>> > >>> >>
>> > >>> >> It's here

Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-26 Thread Martin Perina
Hi Marcelo,

sorry for late response, too many tasks on me at the moment :-(

As Eli said important issues started at 2016-01-20, but engine-setup
log you posted is dated at 2016-01-22. So, did you perform any
upgrade on important configuration changed on Jan 20th? If so could
you please share also this setup log?

Regarding login: I haven't found any issue logging, I see many successful
logins of admin@internal in the log. So are you able to login into webadmin
or not?

Thanks

Martin Perina

- Original Message -
> From: "Marcelo Leandro" <marcelol...@gmail.com>
> To: "Eli Mesika" <emes...@redhat.com>
> Cc: "Martin Perina" <mper...@redhat.com>, "users" <users@ovirt.org>, "Amador 
> Pahim" <apa...@redhat.com>
> Sent: Tuesday, January 26, 2016 12:27:55 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> Martins, can you help me ? I can't administer my environment.
> 
> 2016-01-25 8:30 GMT-03:00 Eli Mesika <emes...@redhat.com>:
> > Adding Martin
> >
> > There are some aaa errors before that, but first significant error is in
> > 2016-01-20 00:14:55,002
> > Can you take a look ?
> >
> > - Original Message -
> >> From: "Marcelo Leandro" <marcelol...@gmail.com>
> >> To: "Eli Mesika" <emes...@redhat.com>
> >> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
> >> Sent: Sunday, January 24, 2016 1:48:04 PM
> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >>
> >> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
> >>
> >>
> >> ----- Original Message -
> >> > From: "Amador Pahim" <apa...@redhat.com>
> >> > To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
> >> > Cc: emes...@redhat.com
> >> > Sent: Friday, January 22, 2016 7:08:20 PM
> >> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >> >
> >> > On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
> >> > > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
> >> > > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
> >> > > engine.log say
> >> > > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid type
> >> > > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
> >> > > type 'Id.class'): no such class found (through reference chain:
> >> > >
> >> org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
> >> >
> >> > hmm, I see a similar msg here:
> >> > http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
> >> >
> >> > Not sure if related. Eli? Any thoughts here?
> >>
> >> I don't think it is related ...
> >> Amador, can you please attach a full engine log ?
> >>
> >> >
> >> > >
> >> > > Here the setup log:
> >> > > https://copy.com/YBddV8bg3tnjHnwp
> >> > >
> >> > > And here the engine.log:
> >> > > https://copy.com/TWjgIu7KwSkcmRZ8
> >> > >
> >> > > Need urgent assistance. Thank you in advance.
> >> > >
> >> > > Best Regards,
> >> > > Marcelo Leandro
> >> > > ___
> >> > > Users mailing list
> >> > > Users@ovirt.org
> >> > > http://lists.ovirt.org/mailman/listinfo/users
> >> >
> >> >
> >>
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-26 Thread Yedidyah Bar David
On Tue, Jan 26, 2016 at 1:27 PM, Marcelo Leandro <marcelol...@gmail.com> wrote:
> Martins, can you help me ? I can't administer my environment.

Did you try running engine-setup?

>
> 2016-01-25 8:30 GMT-03:00 Eli Mesika <emes...@redhat.com>:
>> Adding Martin
>>
>> There are some aaa errors before that, but first significant error is in 
>> 2016-01-20 00:14:55,002
>> Can you take a look ?
>>
>> - Original Message -
>>> From: "Marcelo Leandro" <marcelol...@gmail.com>
>>> To: "Eli Mesika" <emes...@redhat.com>
>>> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
>>> Sent: Sunday, January 24, 2016 1:48:04 PM
>>> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>>
>>> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
>>>
>>>
>>> - Original Message -
>>> > From: "Amador Pahim" <apa...@redhat.com>
>>> > To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
>>> > Cc: emes...@redhat.com
>>> > Sent: Friday, January 22, 2016 7:08:20 PM
>>> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>>> >
>>> > On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
>>> > > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
>>> > > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
>>> > > engine.log say
>>> > > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid type
>>> > > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
>>> > > type 'Id.class'): no such class found (through reference chain:
>>> > >
>>> org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
>>> >
>>> > hmm, I see a similar msg here:
>>> > http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
>>> >
>>> > Not sure if related. Eli? Any thoughts here?
>>>
>>> I don't think it is related ...
>>> Amador, can you please attach a full engine log ?
>>>
>>> >
>>> > >
>>> > > Here the setup log:
>>> > > https://copy.com/YBddV8bg3tnjHnwp
>>> > >
>>> > > And here the engine.log:
>>> > > https://copy.com/TWjgIu7KwSkcmRZ8
>>> > >
>>> > > Need urgent assistance. Thank you in advance.
>>> > >
>>> > > Best Regards,
>>> > > Marcelo Leandro
>>> > > ___
>>> > > Users mailing list
>>> > > Users@ovirt.org
>>> > > http://lists.ovirt.org/mailman/listinfo/users
>>> >
>>> >
>>>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users



-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-25 Thread Eli Mesika
Adding Martin

There are some aaa errors before that, but first significant error is in 
2016-01-20 00:14:55,002 
Can you take a look ?

- Original Message -
> From: "Marcelo Leandro" <marcelol...@gmail.com>
> To: "Eli Mesika" <emes...@redhat.com>
> Cc: users@ovirt.org, "Amador Pahim" <apa...@redhat.com>
> Sent: Sunday, January 24, 2016 1:48:04 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
> 
> 
> - Original Message -
> > From: "Amador Pahim" <apa...@redhat.com>
> > To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
> > Cc: emes...@redhat.com
> > Sent: Friday, January 22, 2016 7:08:20 PM
> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> >
> > On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
> > > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
> > > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
> > > engine.log say
> > > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid type
> > > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
> > > type 'Id.class'): no such class found (through reference chain:
> > >
> org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
> >
> > hmm, I see a similar msg here:
> > http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
> >
> > Not sure if related. Eli? Any thoughts here?
> 
> I don't think it is related ...
> Amador, can you please attach a full engine log ?
> 
> >
> > >
> > > Here the setup log:
> > > https://copy.com/YBddV8bg3tnjHnwp
> > >
> > > And here the engine.log:
> > > https://copy.com/TWjgIu7KwSkcmRZ8
> > >
> > > Need urgent assistance. Thank you in advance.
> > >
> > > Best Regards,
> > > Marcelo Leandro
> > > ___
> > > Users mailing list
> > > Users@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-24 Thread Eli Mesika


- Original Message -
> From: "Amador Pahim" <apa...@redhat.com>
> To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
> Cc: emes...@redhat.com
> Sent: Friday, January 22, 2016 7:08:20 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
> > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
> > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
> > engine.log say
> > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid type
> > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
> > type 'Id.class'): no such class found (through reference chain:
> > org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
> 
> hmm, I see a similar msg here:
> http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
> 
> Not sure if related. Eli? Any thoughts here?

I don't think it is related ...
Amador, can you please attach a full engine log ?

> 
> >
> > Here the setup log:
> > https://copy.com/YBddV8bg3tnjHnwp
> >
> > And here the engine.log:
> > https://copy.com/TWjgIu7KwSkcmRZ8
> >
> > Need urgent assistance. Thank you in advance.
> >
> > Best Regards,
> > Marcelo Leandro
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> 
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-24 Thread Marcelo Leandro
It's here : https://copy.com/TWjgIu7KwSkcmRZ8


- Original Message -
> From: "Amador Pahim" <apa...@redhat.com>
> To: "Marcelo Leandro" <marcelol...@gmail.com>, users@ovirt.org
> Cc: emes...@redhat.com
> Sent: Friday, January 22, 2016 7:08:20 PM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
>
> On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
> > After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
> > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
> > engine.log say
> > Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid type
> > id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
> > type 'Id.class'): no such class found (through reference chain:
> >
org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
>
> hmm, I see a similar msg here:
> http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
>
> Not sure if related. Eli? Any thoughts here?

I don't think it is related ...
Amador, can you please attach a full engine log ?

>
> >
> > Here the setup log:
> > https://copy.com/YBddV8bg3tnjHnwp
> >
> > And here the engine.log:
> > https://copy.com/TWjgIu7KwSkcmRZ8
> >
> > Need urgent assistance. Thank you in advance.
> >
> > Best Regards,
> > Marcelo Leandro
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6

2016-01-22 Thread Amador Pahim

On 01/22/2016 03:03 PM, Marcelo Leandro wrote:

After engine-setup from ovirt-engine-3.5.6.2-1.el7.centos to
ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to login anymore. The
engine.log say
Caused by: org.codehaus.jackson.map.JsonMappingException: Invalid type
id 'org.ovirt.engine.core.common.businessentities.DiskImage' (for id
type 'Id.class'): no such class found (through reference chain:
org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])


hmm, I see a similar msg here:
http://lists.ovirt.org/pipermail/devel/2015-July/010976.html

Not sure if related. Eli? Any thoughts here?



Here the setup log:
https://copy.com/YBddV8bg3tnjHnwp

And here the engine.log:
https://copy.com/TWjgIu7KwSkcmRZ8

Need urgent assistance. Thank you in advance.

Best Regards,
Marcelo Leandro
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users