Bharat -
Can you supply the following
grep -i processor /proc/cpuinfo
free -m
gluster volume info
>From each node. Maybe post to pastebin or something so its easier to read
On Tue, Sep 26, 2017 at 3:54 AM, Tailor, Bharat <
bha...@synergysystemsindia.com> wrote:
> Hi,
>
> I've reinstalled
Hi,
I've reinstalled Centos minimal on 3 hosts.
Configured replica 3 gluster storage for engine & data.
Configured dns entry in /etc/hosts for all three host and ovirt engine also.
*yum install ovirt-engine-appliance*
*hosted-engine --deploy*
Choose glusterfs storage for engine. Installation
Hi,
Any help from you guys would be appreciated.
Regrards
Bharat Kumar
G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad
Udaipur (Raj.)
313001
Mob: +91-9950-9960-25
On Thu, Sep 14, 2017 at 7:02 PM, Tailor, Bharat <
bha...@synergysystemsindia.com> wrote:
> Hi,
>
> I've reinstall Centos7
Hi,
I've reinstall Centos7 Minimal on all three hosts. Installed Ovirt self
hosted ova 4.1 on test1.localdomain.
After installation completed, I got an error like engine vm is unreachable.
I am able to ping engine from both IP and FQDN but unable to access it in
browser. When I check engine VM
I can't. I've destroyed that VM and clean all files. Now I am trying to
reinstall new engine VM.
Regrards
Bharat Kumar
G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad
Udaipur (Raj.)
313001
Mob: +91-9950-9960-25
On Wed, Sep 13, 2017 at 5:12 PM, Donny Davis wrote:
>
I am not using any DNS server. I have made entries in /etc/hosts for all
Nodes and for engine VM also.
Regrards
Bharat Kumar
G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad
Udaipur (Raj.)
313001
Mob: +91-9950-9960-25
On Wed, Sep 13, 2017 at 5:02 PM, Donny Davis wrote:
Can you ping the VM when it comes up?
On Wed, Sep 13, 2017 at 7:40 AM, Tailor, Bharat <
bha...@synergysystemsindia.com> wrote:
> I am not using any DNS server. I have made entries in /etc/hosts for all
> Nodes and for engine VM also.
>
> Regrards
> Bharat Kumar
>
> G15- Vinayak Nagar
Bharat,
Are you using DNS for host names or /etc/hosts
I personally place the engines hostname with ip address in /etc/hosts on
all the hypervisors in case my DNS services go down.
I also put the hypervisors in /etc/hosts too
Hope this helps.
On Wed, Sep 13, 2017 at 6:04 AM, Yaniv Kaul
On Wed, Sep 13, 2017 at 8:42 AM, Tailor, Bharat <
bha...@synergysystemsindia.com> wrote:
> Hi Charles & Donny,
>
> Thank you so much.
>
> @Donny my 3rd node's IP is 192.168.100.17(Mentioned wrong in above mail).
> I was trying to install ovirt ova on test2.localdomain. I've cleared all
> the
Hi Charles & Donny,
Thank you so much.
@Donny my 3rd node's IP is 192.168.100.17(Mentioned wrong in above mail).
I was trying to install ovirt ova on test2.localdomain. I've cleared all
the steps and at last I got a message like "Engine is still unreachable".
Kindly help me to troubleshoot it.
Bharat -
1. Yes. Will need to configure switch port as a trunk and setup your VLANs
and VLAN ID's
2. Yes
3. You can still access the hosts. The engine itself crashing or being down
wont stop your VMs or hosts or anything (unless fencing). You can use virsh
4. My suggestion here is start
1. Yes, you can do this
2. Yes, In linux it's called bonding and this can be done from the UI
3. You can get around using the Engine machine if required with virsh or
virt-manager - however I would just wait for the manager to migrate and
start on another host in the cluster
4. The deployment
Hi Charles,
Thank you so much to share a cool stuff with us.
My doubts are still not cleared.
1. What If I have only single Physical network adaptor? Can't I use it
for management network & production network both.
2. If I have two Physical network adaptor, Can I configure NIC teaming
Interestingly enough I literally just went through this same thing with a
slight variation.
Note to the below: I am not sure if this would be considerd best practice
or good for something long term support but I made due with what I had
I had 10Gb cards for my storage network but no 10Gb switch,
14 matches
Mail list logo