Re: [ovirt-users] Optaplanner Problem
connections idle longer than 30 SECONDS the file is getting very big (1GB per day) and I tried to change the log level but I couldn't. Can you please tell me how can I switch it? Thanks, Sokratis - Original Message - Hi, Please check the browser's debug console for error messages. Then check the firewall and jboss configuration on the Optimizer server. The JBoss log on the optimizer machine will tell you whether it does some computations (you will see score lines). Then try manually connecting (telnet) to optimizer:8080 from your machine (the same where the webadmin is running). We need more data to be able to give you more specific instructions. -- Martin Sivák msivak at redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like.ma at cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users at ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfediuck at redhat.com To: sokratis123k at outlook.com CC: users at ovirt.org; msivak at redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis123k at outlook.com To: users at ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfedi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org; msi...@redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like...@cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users@ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfedi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org; msi...@redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
Hi, Please check the browser's debug console for error messages. Then check the firewall and jboss configuration on the Optimizer server. The JBoss log on the optimizer machine will tell you whether it does some computations (you will see score lines). Then try manually connecting (telnet) to optimizer:8080 from your machine (the same where the webadmin is running). We need more data to be able to give you more specific instructions. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like...@cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users@ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfedi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org; msi...@redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 timeout/timeoutId@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:14023:24 completeOutstandingRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:4300:6 Browser/self.defer/timeoutId@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:4601:6 } angular.js:9778 By the way, the server.log file on the optimizer server is in debug mode and constantly writes the following lines: DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thread-76) Closing expired connections DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thread-76) Closing connections idle longer than 30 SECONDS the file is getting very big (1GB per day) and I tried to change the log level but I couldn't. Can you please tell me how can I switch it? Thanks, Sokratis - Original Message - Hi, Please check the browser's debug console for error messages. Then check the firewall and jboss configuration on the Optimizer server. The JBoss log on the optimizer machine will tell you whether it does some computations (you will see score lines). Then try manually connecting (telnet) to optimizer:8080 from your machine (the same where the webadmin is running). We need more data to be able to give you more specific instructions. -- Martin Sivák msivak at redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like.ma at cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users at ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfediuck at redhat.com To: sokratis123k at outlook.com CC: users at ovirt.org; msivak at redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis123k at outlook.com To: users at ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
http://optimizer:8080/ovirt-optimizer/result/0001-0001-0001-0001-00a1/score[Learn More] angular.js:8321 Exception { message: , result: 2153644038, name: , filename: https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js;, lineNumber: 8321, columnNumber: 0, inner: null, data: null, stack: createHttpBackend/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8321:6 sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0 $http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 timeout/timeoutId@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:14023:24 completeOutstandingRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:4300:6 Browser/self.defer/timeoutId@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:4601:6 } angular.js:9778 By the way, the server.log file on the optimizer server is in debug mode and constantly writes the following lines: DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thread-76) Closing expired connections DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thread-76) Closing connections idle longer than 30 SECONDS the file is getting very big (1GB per day) and I tried to change the log level but I couldn't. Can you please tell me how can I switch it? Thanks, Sokratis - Original Message - Hi, Please check the browser's debug console for error messages. Then check the firewall and jboss configuration on the Optimizer server. The JBoss log on the optimizer machine will tell you whether it does some computations (you will see score lines). Then try manually connecting (telnet) to optimizer:8080 from your machine (the same where the webadmin is running). We need more data to be able to give you more specific instructions. -- Martin Sivák msivak at redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like.ma at cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users at ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfediuck at redhat.com To: sokratis123k at outlook.com CC: users at ovirt.org; msivak at redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis123k at outlook.com To: users at ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available
Re: [ovirt-users] Optaplanner Problem
qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:26 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:16 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:15 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:13 done@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8204:34 completeRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8412:7 createHttpBackend//xhr.onreadystatechange@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8351:1 angular.js:9778 Blocked loading mixed active content http://optimizer:8080/ovirt-optimizer/result/0001-0001-0001-0001-00a1/score[Learn More] angular.js:8321 Exception { message: , result: 2153644038, name: , filename: https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js;, lineNumber: 8321, columnNumber: 0, inner: null, data: null, stack: createHttpBackend/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8321:6 sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0 $http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 timeout/timeoutId@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:14023:24 completeOutstandingRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:4300:6 Browser/self.defer/timeoutId@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:4601:6 } angular.js:9778 By the way, the server.log file on the optimizer server is in debug mode and constantly writes the following lines: DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thread-76) Closing expired connections DEBUG [org.apache.http.impl.conn.PoolingClientConnectionManager] (Thread-76) Closing connections idle longer than 30 SECONDS the file is getting very big (1GB per day) and I tried to change the log level but I couldn't. Can you please tell me how can I switch it? Thanks, Sokratis - Original Message - Hi, Please check the browser's debug console for error messages. Then check the firewall and jboss configuration on the Optimizer server. The JBoss log on the optimizer machine will tell you whether it does some computations (you will see score lines). Then try manually connecting (telnet) to optimizer:8080 from your machine (the same where the webadmin is running). We need more data to be able to give you more specific instructions. -- Martin Sivák msivak at redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like.ma at cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users at ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfediuck at redhat.com To: sokratis123k at outlook.com CC: users at ovirt.org; msivak at redhat.com Subject: Re: [ovirt-users] Optaplanner Problem
Re: [ovirt-users] Optaplanner Problem
access the optimizer. like.ma at cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users at ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfediuck at redhat.com To: sokratis123k at outlook.com CC: users at ovirt.org; msivak at redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis123k at outlook.com To: users at ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
). We need more data to be able to give you more specific instructions. -- Martin Sivák msivak at redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like.ma at cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users at ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfediuck at redhat.com To: sokratis123k at outlook.com CC: users at ovirt.org; msivak at redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis123k at outlook.com To: users at ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
- Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users