Re: [ovirt-users] Ovirt Node NG 4.0.0 wants to bridge my infiniband link

Thanks, setting the link as non VM networks let me configure the interface as needed. Regards On 07/04/2016 04:16 PM, Yevgeny Zaspitsky wrote: > Infiniband should not be bridged. > Ovirt tries to build a bridge over a NIC if the network is a VM one. Please > verify that it isn't. > > On Mon,

Re: [ovirt-users] Ovirt Node NG 4.0.0 wants to bridge my infiniband link

Infiniband should not be bridged. Ovirt tries to build a bridge over a NIC if the network is a VM one. Please verify that it isn't. On Mon, Jul 4, 2016 at 5:10 PM, Giorgio Biacchi wrote: > As I said, Infiniband is not ethernet so it cannot be L2 bridged. This is > normal >

Re: [ovirt-users] Ovirt Node NG 4.0.0 wants to bridge my infiniband link

As I said, Infiniband is not ethernet so it cannot be L2 bridged. This is normal and I understand why it can't be done. I'd like to know if there's a way to configure host networking for infiniband link without bridging because is not necessary to have a bridge there. In addition to this, 3.6

Re: [ovirt-users] Ovirt Node NG 4.0.0 wants to bridge my infiniband link

As I remember the IBoIP is not fully implemented Ethernet protocol, it does not support bridging. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam,

Re: [ovirt-users] Ovirt Node NG 4.0.0 wants to bridge my infiniband link

Hi, hooks are only needed to set connected mode and the correct MTU on the infiniband link. The problem is bound to the host networking setup procedure. Here's the hooks: cat /usr/libexec/vdsm/hooks/before_vdsm_start/10_set_ib0_connected_mode #!/bin/sh echo Setting IB connected mode echo

Re: [ovirt-users] Ovirt Node NG 4.0.0 wants to bridge my infiniband link

Hello, What's "couple of vdsm hooks"? Could you provide the source code of those? Regards, Yevgeny On Mon, Jul 4, 2016 at 1:43 PM, Giorgio Biacchi wrote: > Hi list, > I'm trying a test installation of the new Ovirt Node Image and engine > before > upgrading my 3.6