Re: [ovirt-users] USB 2.0 compatibility -- RESOLVED!

2017-02-09 Thread Yedidyah Bar David
On Thu, Feb 9, 2017 at 3:15 PM, Jonathan Woytek  wrote:
>
> On Thu, Feb 9, 2017 at 3:24 AM Yedidyah Bar David  wrote:
>>
>> [...]
>>
>> Would you like to open an RFE and suggest a new arrangement for the UI,
>> and push a doc update to the website?
>
>
>
> I would, but I felt uncomfortable doing that, as I'm still an oVirt newb. I
> thought perhaps I legitimately missed this somewhere. I'll peruse the doc
> organization to see where I think this makes sense, and I'll certainly do
> that and the RFE. Thanks.

If the UI is not intuitive enough, we need newbies to tell this - experienced
users do not notice anymore...

Re docs - IMO best is to make sure that the search terms that people might
use when searching for solutions, will return good results. People do not
read docs like books. So if you did that and didn't find anything easily,
it means we should improve the docs.
-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB 2.0 compatibility -- RESOLVED!

2017-02-09 Thread Jonathan Woytek
On Thu, Feb 9, 2017 at 3:24 AM Yedidyah Bar David  wrote:

> [...]
>
> Would you like to open an RFE and suggest a new arrangement for the UI,
> and push a doc update to the website?



I would, but I felt uncomfortable doing that, as I'm still an oVirt newb. I
thought perhaps I legitimately missed this somewhere. I'll peruse the doc
organization to see where I think this makes sense, and I'll certainly do
that and the RFE. Thanks.

Jonathan

-- 
Sent from my Commodore64
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB 2.0 compatibility -- RESOLVED!

2017-02-09 Thread Yedidyah Bar David
On Thu, Feb 9, 2017 at 2:09 AM, Jonathan Woytek  wrote:
> I was finally able to resolve this. So that maybe other users can find how
> to fix this if they run into the same issues:
>
> tl;dr:
> Edit the virtual machine in question, go under Console, make sure SPICE is
> chosen for graphics, and under "USB Redirection" choose "Native." When you
> reboot the VM, it will have both UHCI and EHCI (2.0) controllers. Now, any
> USB 2.0 devices that you attach will work correctly.
>
>
> Long version:
> I struggled with this for quite a while. While doing some additional
> research, I found a note in the 4.1.0 release notes referencing BZ 1373223.
> This particular note was for ppc64 architecture systems, but it curiously
> said that enabling USB Redirection under SPICE would change the USB
> controllers available on the host. I dug a little deeper into the bug thread
> and found a couple of references that seemed to indicate that x86/x86_64
> exhibited the same behavior. Apparently, UHCI (1.1) is the default because
> it supports SmartCards, but the EHCI (2.0) controller does not. So, turning
> on USB Redirection under SPICE settings for the console enables an EHCI
> controller, thereby enabling devices that require USB 2.0.

Thanks a lot for the report!

>
> Personal opinion:
> This is really obfuscated. It would be great if this switch lived somewhere
> more obvious. Even if that doesn't happen, this should exist in a document
> somewhere. Maybe it does and I couldn't find it, but I tried!

Would you like to open an RFE and suggest a new arrangement for the UI,
and push a doc update to the website?

Best,
-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB 2.0 compatibility -- RESOLVED!

2017-02-08 Thread Jonathan Woytek
I was finally able to resolve this. So that maybe other users can find how
to fix this if they run into the same issues:

tl;dr:
Edit the virtual machine in question, go under Console, make sure SPICE is
chosen for graphics, and under "USB Redirection" choose "Native." When you
reboot the VM, it will have both UHCI and EHCI (2.0) controllers. Now, any
USB 2.0 devices that you attach will work correctly.


Long version:
I struggled with this for quite a while. While doing some additional
research, I found a note in the 4.1.0 release notes referencing BZ 1373223.
This particular note was for ppc64 architecture systems, but it curiously
said that enabling USB Redirection under SPICE would change the USB
controllers available on the host. I dug a little deeper into the bug
thread and found a couple of references that seemed to indicate that
x86/x86_64 exhibited the same behavior. Apparently, UHCI (1.1) is the
default because it supports SmartCards, but the EHCI (2.0) controller does
not. So, turning on USB Redirection under SPICE settings for the console
enables an EHCI controller, thereby enabling devices that require USB 2.0.

Personal opinion:
This is really obfuscated. It would be great if this switch lived somewhere
more obvious. Even if that doesn't happen, this should exist in a document
somewhere. Maybe it does and I couldn't find it, but I tried!

jonathan

-- 
Jonathan Woytek
http://www.dryrose.com
KB3HOZ
PGP:  462C 5F50 144D 6B09 3B65  FCE8 C1DC DEC4 E8B6 AABC
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB problem after update

2016-06-20 Thread ovirt

Hi List,

after some research I found the following but:

Host devicelist in VM Tab is empty after upgrade from 3.6.4
https://bugzilla.redhat.com/show_bug.cgi?id=1341299

What is the ETA for the 3.6.7?

Best regards
Christoph


Am 20.06.2016 um 07:59 schrieb ov...@timmi.org:

Hi list,

I just upgraded from Ovirt 3.6.3 to 3.6.6.

I have two nodes. One of it is also running the engine.

After the upgrade I noticed that my VMs on the master/engine host are 
not able to connect to the USB devices any more.


The "Add Host Devices" dialog is empty and does not show any HW!

On the Hosts Tab I can see "Host Devices".

Please let me know how to fix this issue.

Best regards and thank you

Christoph


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2016-05-16 Thread Brett I. Holcomb
On Sun, 2016-05-15 at 14:40 +0300, Nisim Simsolo wrote:
> Hi
> 
> You can attach host device directly from virtual machines tab ->
> select VM -> host devices sub tab -> "add device" button.
> 
> But first you need to verify your BIOS is supporting intel VT-d or
> AMD vi.
> And you also need to activate it in the kernel. The next link
> describes how to do it: 
> https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linu
> x/7/html/Virtualization_Deployment_and_Administration_Guide/chap-
> Guest_virtual_machine_device_configuration.html#sect-
> Guest_virtual_machine_device_configuration-PCI_devices
> 
> note: Instead of adding "intel_iommu=pt" in the grub cmdline, add
> "intel_iommu=on" or "amd_iommu=on".
> 
> Thank you  Nsim and Martin.  I'll give that  a try.
As a point of information has anyone tried USB/IP or Incentives Pro?___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2016-05-15 Thread Martin Polednik


- Original Message -
> From: "Nisim Simsolo" <nsims...@redhat.com>
> To: biholc...@l1049h.com
> Cc: users@ovirt.org
> Sent: Sunday, May 15, 2016 1:40:07 PM
> Subject: Re: [ovirt-users] USB
> 
> Hi
> 
> You can attach host device directly from virtual machines tab -> select VM
> -> host devices sub tab -> "add device" button.
> 
> But first you need to verify your BIOS is supporting intel VT-d or AMD vi.
> And you also need to activate it in the kernel. The next link describes how
> to do it:
> https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Virtualization_Deployment_and_Administration_Guide/chap-Guest_virtual_machine_device_configuration.html#sect-Guest_virtual_machine_device_configuration-PCI_devices
> 
> note: Instead of adding "intel_iommu=pt" in the grub cmdline, add
> "intel_iommu=on" or "amd_iommu=on".
> 
> Another thing worth mentioning, USB hotplug is not supported yet, so if
> your programmable device is resetting the USB connection each time you
> program it, the USB will be detached from the VM and you will have to
> attach it again in order to see it.

USB passthrough does not require IOMMU, only PCI devices do. The docs need
improvement in that regard.
 
> On Sun, May 15, 2016 at 8:34 AM, Brett I. Holcomb <biholc...@l1049h.com>
> wrote:
> 
> > How do I get a VM to see USB devices?  If I understand it correctly I
> > have to go to Edit VM -> Console and enable USB native.  I have the
> > console options set to use usb.  However, I'm finding conflicting
> > information.  Supposedly libvirt will allow sharing of a USB device
> > over a network but to start with I'd be happy just being able to
> > connect a usb device to the host and having it detected.  I have some
> > programmable devices I'd like to program in Linux using my VM.
> >
> > Has anyone uses usbip and if so how well does  it work?
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> 
> 
> 
> --
> Nisim Simsolo
> QE -Testing Engineer
> IRC: nsimsolo
> int phone - 8272305
> mobile - 054-4779934
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2016-05-15 Thread Nisim Simsolo
Hi

You can attach host device directly from virtual machines tab -> select VM
-> host devices sub tab -> "add device" button.

But first you need to verify your BIOS is supporting intel VT-d or AMD vi.
And you also need to activate it in the kernel. The next link describes how
to do it:
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Virtualization_Deployment_and_Administration_Guide/chap-Guest_virtual_machine_device_configuration.html#sect-Guest_virtual_machine_device_configuration-PCI_devices

note: Instead of adding "intel_iommu=pt" in the grub cmdline, add
"intel_iommu=on" or "amd_iommu=on".

Another thing worth mentioning, USB hotplug is not supported yet, so if
your programmable device is resetting the USB connection each time you
program it, the USB will be detached from the VM and you will have to
attach it again in order to see it.











On Sun, May 15, 2016 at 8:34 AM, Brett I. Holcomb 
wrote:

> How do I get a VM to see USB devices?  If I understand it correctly I
> have to go to Edit VM -> Console and enable USB native.  I have the
> console options set to use usb.  However, I'm finding conflicting
> information.  Supposedly libvirt will allow sharing of a USB device
> over a network but to start with I'd be happy just being able to
> connect a usb device to the host and having it detected.  I have some
> programmable devices I'd like to program in Linux using my VM.
>
> Has anyone uses usbip and if so how well does  it work?
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Nisim Simsolo
QE -Testing Engineer
IRC: nsimsolo
int phone - 8272305
mobile - 054-4779934
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] usb redirect

2015-11-18 Thread Fernando Fuentes
Fixed typos*

Team,

Is there anything out there in the darkness of the internet that shows
how to attach a *usb* device to a guest from the host?
I cant get this to work at all not even from the guest using spice.

Thank you for your time and help.

Regards.

-- 
Fernando Fuentes
ffuen...@txweather.org
http://www.txweather.org

On Wed, Nov 18, 2015, at 09:21 PM, Fernando Fuentes wrote:
> Team,
> 
> Is there anything out there in the darkness of the internet that shows
> how to attach a sub device to a guest from the host?
> I cant get this to work at all not even from the guest using spice.
> 
> Thank you for your time and help.
> 
> Regards.
> 
> -- 
> Fernando Fuentes
> ffuen...@txweather.org
> http://www.txweather.org
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] usb redirect

2015-11-18 Thread Fernando Fuentes
I answer my own question.

Thanks! :)

-- 
Fernando Fuentes
ffuen...@txweather.org
http://www.txweather.org

On Wed, Nov 18, 2015, at 09:24 PM, Fernando Fuentes wrote:
> Fixed typos*
> 
> Team,
> 
> Is there anything out there in the darkness of the internet that shows
> how to attach a *usb* device to a guest from the host?
> I cant get this to work at all not even from the guest using spice.
> 
> Thank you for your time and help.
> 
> Regards.
> 
> -- 
> Fernando Fuentes
> ffuen...@txweather.org
> http://www.txweather.org
> 
> On Wed, Nov 18, 2015, at 09:21 PM, Fernando Fuentes wrote:
> > Team,
> > 
> > Is there anything out there in the darkness of the internet that shows
> > how to attach a sub device to a guest from the host?
> > I cant get this to work at all not even from the guest using spice.
> > 
> > Thank you for your time and help.
> > 
> > Regards.
> > 
> > -- 
> > Fernando Fuentes
> > ffuen...@txweather.org
> > http://www.txweather.org
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB drive Windows problem.

2015-11-11 Thread Lev Veyde
Hi David, 

OK, now I understand your setup more clearly. 

You're redirecting the USB DOK directly from host into the VM. 

In that case no oVirt WGT (nor Spice) are involved, and the access to the 
device is done using the standard Windows drivers, yet somehow the passthrough 
fails. 

I assume that you only inserted one such USB DOK into the host and don't run 
both VMs simultaneously (the Linux and Windows one), and in that case we're 
left with qemu-kvm and Windows itself as the potential sources of the issue. 

Can you please send the qemu-kvm logs ? 

Thanks in advance, 
Lev Veyde. 

- Original Message -

From: "David David" <dd432...@gmail.com> 
To: "Lev Veyde" <lve...@redhat.com> 
Sent: Wednesday, November 11, 2015 9:40:08 AM 
Subject: Re: [ovirt-users] USB drive Windows problem. 

Hi. 

I use VNC to connect to guests. 
for USB redirection using vdsm-hook-hostusb, ie USB pass through from a host to 
a guest. 

The USB section on the guest is: 

 
 
 
 
 
 
 
 

guest's xml is listed in my first message. 

guided by this: 
http://blog.conoracallahan.com/blog/2014/07/19/ovirt-usb-passthrough/ 

2015-11-10 18:44 GMT+03:00 Lev Veyde < lve...@redhat.com > : 


Hi David, 

What client you're using in order to connect to the VM and on what OS ? 
What USB redirection type are you using: Native or Legacy ? 

I guess that it's some issue with the Spice but need more details in order to 
forward it to them properly. 

Thanks in advance, 
Lev Veyde. 

> 
> I try upgrade Qemu by installing centos7. Maybe this will help... 
> 
> 2015-11-09 18:34 GMT+03:00 Sandro Bonazzola < sbona...@redhat.com >: 
> 
>> 
>> 
>> On Thu, Nov 5, 2015 at 3:45 PM, David David < dd432...@gmail.com > wrote: 
>> 
>>> 
>>> 
>>> Hi 
>>> 
>>> I am using Hostusb hook on ovirt 3.5, centos6.6. 
>>> And I am facing problem while adding usb drive to windows2012 as a guest. 
>>> Usb device is passed through to the guest. 
>>> But in windows device manager usb mass storage device shows an 
>>> exclamation mark. And error message is: "This device cannot start: (Code 
>>> 10)" 
>>> In linux VM usb drive works without problem. 
>>> 
>>> 
>> 
>> Which version of the windows guest tools are you using? 
>> 
>> 
>> 
>>> how to fix it? 
>>> 
>>> here is xml of the windows guest: 
>>> 
>>>  
>>> 
>>>  
>>> >> type='unix'/> 
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
>>> win2012 
>>> fd27bf56-334c-4c83-836d-81314c24bb7d 
>>> 1048576 
>>> 1048576 
>>> 16 
>>>  
>>> 1020 
>>>  
>>>  
>>>  
>>> oVirt 
>>> oVirt Node 
>>> 6-6.el6.centos.12.2 
>>> DE1EED73-4B49-6742-A2CD-3A24C43D4489 
>>> fd27bf56-334c-4c83-836d-81314c24bb7d 
>>>  
>>>  
>>>  
>>> hvm 
>>>  
>>>  
>>>  
>>>  
>>>  
>>>  
&g

Re: [ovirt-users] USB drive Windows problem.

2015-11-09 Thread Sandro Bonazzola
On Thu, Nov 5, 2015 at 3:45 PM, David David  wrote:

>
>
> Hi
>
> I am using Hostusb hook on ovirt 3.5, centos6.6.
> And I am facing problem while adding usb drive to windows2012 as a guest.
> Usb device is passed through to the guest.
> But in windows device manager usb mass storage device shows an exclamation
> mark. And error message is: "This device cannot start: (Code 10)"
> In linux VM usb drive works without problem.
>
>

Which version of the windows guest tools are you using?



> how to fix it?
>
> here is xml of the windows guest:
>
> 
>
> 
>type='unix'/>
>   
> 
>   
>   
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>   
>   
> 
> 
> 
> 
> 
>   
>   
> win2012
> fd27bf56-334c-4c83-836d-81314c24bb7d
> 1048576
> 1048576
> 16
> 
>   1020
> 
> 
>   
> oVirt
> oVirt Node
> 6-6.el6.centos.12.2
> DE1EED73-4B49-6742-A2CD-3A24C43D4489
> fd27bf56-334c-4c83-836d-81314c24bb7d
>   
> 
> 
>   hvm
>   
> 
> 
>   
> 
> 
>   SandyBridge
>   
> 
> 
>   
>   
>   
> 
> destroy
> restart
> destroy
> 
>   /usr/libexec/qemu-kvm
>   
> 
> 
> 
> 
> 
> 
> 
>   
>   
>  io='threads'/>
>  file='/rhev/data-center/d187f1d4-e03a-485f-ae2d-f4e4faafc27e/54a27720-48bb-48d4-aeed-2a5c411a45d6/images/39954256-98eb-4b15-99b0-9b855e40fa72/adbd284d-e0c2-4829-98a2-68d938f93e77'>
>   
> 
> 
> 39954256-98eb-4b15-99b0-9b855e40fa72
> 
> 
> 
>   
>   
> 
>  function='0x0'/>
>   
>   
> 
>  function='0x0'/>
>   
>   
> 
>  function='0x2'/>
>   
>   
> 
>  function='0x1'/>
>   
>   
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  function='0x0'/>
>   
>   
> 
> 
> 
>   
>   
>  path='/var/lib/libvirt/qemu/channels/fd27bf56-334c-4c83-836d-81314c24bb7d.com.redhat.rhevm.vdsm'/>
> 
> 
> 
>   
>   
>  path='/var/lib/libvirt/qemu/channels/fd27bf56-334c-4c83-836d-81314c24bb7d.org.qemu.guest_agent.0'/>
> 
> 
> 
>   
>   
> 
>   
>   
>passwd='*' passwdValidTo='1970-01-01T00:00:01'>
>  network='vdsm-ovirtmgmt' fromConfig='0'/>
>   
>   
> 
> 
>  function='0x0'/>
>   
>   
> 
>   
>   
>   
> 
> 
>   
>   
> 
>  function='0x0'/>
>   
> 
> 
>   system_u:system_r:svirt_t:s0:c84,c423
>   system_u:object_r:svirt_image_t:s0:c84,c423
> 
>   
> 
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2015-10-05 Thread suporte
Thanks, it's working. 
Here is what I did: 

On the server node: 
yum install -y vdsm-hook-hostusb 
systemctl restart vdsmd 

On the server engine: 
engine-config -s 
"UserDefinedVMProperties=hostusb=^0x[0-9a-fA-F]{4}:0x[0-9a-fA-F]{4}$" 
service ovirt-engine restart 

lsusb to find the device, Vendor and product ID 
Shutdown the VM, edit it (Advanced, Custom properties) 
Add a custom key, select hostusb and enter the key, in my case 0x04b9:0x0300 
Save and start the VM, the USB device must be plugged into the server node. 

José 

- Mensagem original -

De: "Michal Skrivanek" <michal.skriva...@redhat.com> 
Para: supo...@logicworks.pt 
Cc: "Nathanaël Blanchet" <blanc...@abes.fr>, users@ovirt.org 
Enviadas: Sexta-feira, 2 De Outubro de 2015 13:33:56 
Assunto: Re: [ovirt-users] USB 


On 2 Oct 2015, at 14:03, supo...@logicworks.pt wrote: 




Thanks, well the version 3.6 is still very buggy. 




the release is not that far away;-) but at this very moment surely latest 3.5.z 
is more stable (however note that with any host device passthrough the 
stability may be affected) 




where can I enable hostusb vdsm hook ? 




just follow general hook docs 
it should have readme and docs how to add it to custom properties 





José 

- Mensagem original -

From: "Michal Skrivanek" < michal.skriva...@redhat.com > 
To: "Nathanaël Blanchet" < blanc...@abes.fr >, supo...@logicworks.pt 
Cc: users@ovirt.org 
Sent: Friday, October 2, 2015 11:34:33 AM 
Subject: Re: [ovirt-users] USB 


On 2 Oct 2015, at 12:05, Nathanaël Blanchet wrote: 




On the hypervisor : 
yum install -y vdsm-hook-hostusb 
systemctl restart vdsmd 


Le 02/10/2015 11:56, supo...@logicworks.pt a écrit : 



Thanks. 
How can I install hostusb? It is a windows VM machine. 

José 

- Mensagem original -

From: "Simone Tiraboschi" <stira...@redhat.com> 
To: supo...@logicworks.pt 
Cc: "users" <users@ovirt.org> 
Sent: Friday, October 2, 2015 10:21:19 AM 
Subject: Re: [ovirt-users] USB 



On Fri, Oct 2, 2015 at 11:02 AM, < supo...@logicworks.pt > wrote: 



Hello, 

It's possible for a VM to read a USB pen connetced to the host (oVirt 3.5)? 




Yes, installing and enabling hostusb vdsm hook. 







also note in 3.6 there will be native support for host devices passthrough and 
you won't need any hook 
PCI and USB (USB has a libvirt permission issue currently so will probably 
really work only in 3.6.1/3.6.2 once EL7.2 is available) 

Thanks, 
michal 








Then define a custom property called hostusb and set it to 
hostusb=VendorId:ProductId getting that values from lsusb on the host. 
The VM must be pinned to the host and live-migration will not be possible, 






Thanks 

José 

-- 

Jose Ferradeira 
http://www.logicworks.pt 


___ 
Users mailing list 
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 








___
Users mailing list Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 



-- 
Nathanaël Blanchet

Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5   
Tél. 33 (0)4 67 54 84 55
Fax  33 (0)4 67 54 84 14 blanc...@abes.fr 
___ 
Users mailing list 
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 










___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2015-10-02 Thread Michal Skrivanek

On 2 Oct 2015, at 14:03, supo...@logicworks.pt wrote:

> Thanks, well the version 3.6 is still very buggy.

the release is not that far away;-) but at this very moment surely latest 3.5.z 
is more stable (however note that with any host device passthrough the 
stability may be affected)

> where can I enable hostusb vdsm hook ?

just follow general hook docs
it should have readme and docs how to add it to custom properties

> 
> José
> 
> From: "Michal Skrivanek" <michal.skriva...@redhat.com>
> To: "Nathanaël Blanchet" <blanc...@abes.fr>, supo...@logicworks.pt
> Cc: users@ovirt.org
> Sent: Friday, October 2, 2015 11:34:33 AM
> Subject: Re: [ovirt-users] USB
> 
> 
> On 2 Oct 2015, at 12:05, Nathanaël Blanchet wrote:
> 
> On the hypervisor : 
> yum install -y vdsm-hook-hostusb
> systemctl restart vdsmd
> 
> 
> Le 02/10/2015 11:56, supo...@logicworks.pt a écrit :
> Thanks.
> How can I install hostusb? It is a windows VM machine.
> 
> José
> 
> From: "Simone Tiraboschi" <stira...@redhat.com>
> To: supo...@logicworks.pt
> Cc: "users" <users@ovirt.org>
> Sent: Friday, October 2, 2015 10:21:19 AM
> Subject: Re: [ovirt-users] USB
> 
> 
> 
> On Fri, Oct 2, 2015 at 11:02 AM, <supo...@logicworks.pt> wrote:
> Hello,
> 
> It's possible for a VM to read a USB pen connetced to the host (oVirt 3.5)?
> 
> Yes, installing and enabling hostusb vdsm hook.
> 
> also note in 3.6 there will be native support for host devices passthrough 
> and you won't need any hook
> PCI and USB (USB has a libvirt permission issue currently so will probably 
> really work only in 3.6.1/3.6.2 once EL7.2 is available)
> 
> Thanks,
> michal
> 
> 
> Then define a custom property called hostusb and set it to 
> hostusb=VendorId:ProductId getting that values from lsusb on the host.
> The VM must be pinned to the host and live-migration will not be possible,
> 
> 
> 
>  
> Thanks
> 
> José
> 
> -- 
> Jose Ferradeira
> http://www.logicworks.pt
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
> 
> 
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
> -- 
> Nathanaël Blanchet
> 
> Supervision réseau
> Pôle Infrastrutures Informatiques
> 227 avenue Professeur-Jean-Louis-Viala
> 34193 MONTPELLIER CEDEX 5 
> Tél. 33 (0)4 67 54 84 55
> Fax  33 (0)4 67 54 84 14
> blanc...@abes.fr 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
> 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2015-10-02 Thread Nathanaël Blanchet

On the hypervisor :
yum install -y vdsm-hook-hostusb
systemctl restart vdsmd


Le 02/10/2015 11:56, supo...@logicworks.pt a écrit :

Thanks.
How can I install hostusb? It is a windows VM machine.

José


*From: *"Simone Tiraboschi" <stira...@redhat.com>
*To: *supo...@logicworks.pt
*Cc: *"users" <users@ovirt.org>
*Sent: *Friday, October 2, 2015 10:21:19 AM
*Subject: *Re: [ovirt-users] USB



On Fri, Oct 2, 2015 at 11:02 AM, <supo...@logicworks.pt 
<mailto:supo...@logicworks.pt>> wrote:


Hello,

It's possible for a VM to read a USB pen connetced to the host
(oVirt 3.5)?


Yes, installing and enabling hostusb vdsm hook.

Then define a custom property called hostusb and set it 
to hostusb=VendorId:ProductId getting that values from lsusb on the host.

The VM must be pinned to the host and live-migration will not be possible,



Thanks

José

-- 


Jose Ferradeira
http://www.logicworks.pt


___
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


--
Nathanaël Blanchet

Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5   
Tél. 33 (0)4 67 54 84 55
Fax  33 (0)4 67 54 84 14
blanc...@abes.fr

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2015-10-02 Thread Michal Skrivanek

On 2 Oct 2015, at 12:05, Nathanaël Blanchet wrote:

> On the hypervisor : 
> yum install -y vdsm-hook-hostusb
> systemctl restart vdsmd
> 
> 
> Le 02/10/2015 11:56, supo...@logicworks.pt a écrit :
>> Thanks.
>> How can I install hostusb? It is a windows VM machine.
>> 
>> José
>> 
>> From: "Simone Tiraboschi" <stira...@redhat.com>
>> To: supo...@logicworks.pt
>> Cc: "users" <users@ovirt.org>
>> Sent: Friday, October 2, 2015 10:21:19 AM
>> Subject: Re: [ovirt-users] USB
>> 
>> 
>> 
>> On Fri, Oct 2, 2015 at 11:02 AM, <supo...@logicworks.pt> wrote:
>> Hello,
>> 
>> It's possible for a VM to read a USB pen connetced to the host (oVirt 3.5)?
>> 
>> Yes, installing and enabling hostusb vdsm hook.

also note in 3.6 there will be native support for host devices passthrough and 
you won't need any hook
PCI and USB (USB has a libvirt permission issue currently so will probably 
really work only in 3.6.1/3.6.2 once EL7.2 is available)

Thanks,
michal

>> 
>> Then define a custom property called hostusb and set it to 
>> hostusb=VendorId:ProductId getting that values from lsusb on the host.
>> The VM must be pinned to the host and live-migration will not be possible,
>> 
>> 
>> 
>>  
>> Thanks
>> 
>> José
>> 
>> -- 
>> Jose Ferradeira
>> http://www.logicworks.pt
>> 
>> 
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>> 
>> 
>> 
>> 
>> 
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
> 
> -- 
> Nathanaël Blanchet
> 
> Supervision réseau
> Pôle Infrastrutures Informatiques
> 227 avenue Professeur-Jean-Louis-Viala
> 34193 MONTPELLIER CEDEX 5 
> Tél. 33 (0)4 67 54 84 55
> Fax  33 (0)4 67 54 84 14
> blanc...@abes.fr 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2015-10-02 Thread suporte
Thanks. 
How can I install hostusb? It is a windows VM machine. 

José 

- Original Message -

From: "Simone Tiraboschi" <stira...@redhat.com> 
To: supo...@logicworks.pt 
Cc: "users" <users@ovirt.org> 
Sent: Friday, October 2, 2015 10:21:19 AM 
Subject: Re: [ovirt-users] USB 



On Fri, Oct 2, 2015 at 11:02 AM, < supo...@logicworks.pt > wrote: 



Hello, 

It's possible for a VM to read a USB pen connetced to the host (oVirt 3.5)? 




Yes, installing and enabling hostusb vdsm hook. 

Then define a custom property called hostusb and set it to 
hostusb=VendorId:ProductId getting that values from lsusb on the host. 
The VM must be pinned to the host and live-migration will not be possible, 






Thanks 

José 

-- 

Jose Ferradeira 
http://www.logicworks.pt 


___ 
Users mailing list 
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 






___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2015-10-02 Thread Simone Tiraboschi
On Fri, Oct 2, 2015 at 11:02 AM,  wrote:

> Hello,
>
> It's possible for a VM to read a USB pen connetced to the host (oVirt 3.5)?
>

Yes, installing and enabling hostusb vdsm hook.

Then define a custom property called hostusb and set it
to hostusb=VendorId:ProductId getting that values from lsusb on the host.
The VM must be pinned to the host and live-migration will not be possible,





> Thanks
>
> José
>
> --
> --
> Jose Ferradeira
> http://www.logicworks.pt
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2015-10-02 Thread suporte
Thanks, well the version 3.6 is still very buggy. 
where can I enable hostusb vdsm hook ? 

José 

- Original Message -

From: "Michal Skrivanek" <michal.skriva...@redhat.com> 
To: "Nathanaël Blanchet" <blanc...@abes.fr>, supo...@logicworks.pt 
Cc: users@ovirt.org 
Sent: Friday, October 2, 2015 11:34:33 AM 
Subject: Re: [ovirt-users] USB 


On 2 Oct 2015, at 12:05, Nathanaël Blanchet wrote: 




On the hypervisor : 
yum install -y vdsm-hook-hostusb 
systemctl restart vdsmd 


Le 02/10/2015 11:56, supo...@logicworks.pt a écrit : 



Thanks. 
How can I install hostusb? It is a windows VM machine. 

José 

- Original Message -

From: "Simone Tiraboschi" <stira...@redhat.com> 
To: supo...@logicworks.pt 
Cc: "users" <users@ovirt.org> 
Sent: Friday, October 2, 2015 10:21:19 AM 
Subject: Re: [ovirt-users] USB 



On Fri, Oct 2, 2015 at 11:02 AM, < supo...@logicworks.pt > wrote: 



Hello, 

It's possible for a VM to read a USB pen connetced to the host (oVirt 3.5)? 




Yes, installing and enabling hostusb vdsm hook. 







also note in 3.6 there will be native support for host devices passthrough and 
you won't need any hook 
PCI and USB (USB has a libvirt permission issue currently so will probably 
really work only in 3.6.1/3.6.2 once EL7.2 is available) 

Thanks, 
michal 








Then define a custom property called hostusb and set it to 
hostusb=VendorId:ProductId getting that values from lsusb on the host. 
The VM must be pinned to the host and live-migration will not be possible, 






Thanks 

José 

-- 

Jose Ferradeira 
http://www.logicworks.pt 


___ 
Users mailing list 
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 








___
Users mailing list Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 



-- 
Nathanaël Blanchet

Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5   
Tél. 33 (0)4 67 54 84 55
Fax  33 (0)4 67 54 84 14 blanc...@abes.fr 
___ 
Users mailing list 
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB

2015-10-02 Thread Gonzalo Rafuls
Jose,

Haven't tried this one before but seems like it is possible:
http://www.ovirt.org/VDSM-Hooks/hostusb

Cheers,
Gonza.-

On Fri, Oct 2, 2015 at 11:02 AM,  wrote:

> Hello,
>
> It's possible for a VM to read a USB pen connetced to the host (oVirt 3.5)?
>
> Thanks
>
> José
>
> --
> --
> Jose Ferradeira
> http://www.logicworks.pt
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] usb redirection in native mode does not work in linked clones

2015-08-11 Thread Cristian Mammoli

It was 3.5.3, now I'm test rhev and the issue is not present

Il 07/08/2015 14:09, Jiri Belka ha scritto:

From: Cristian Mammoli c.mamm...@apra.it
To: users@ovirt.org
Sent: Monday, July 27, 2015 5:35:45 PM
Subject: [ovirt-users] usb redirection in native mode does not work in  linked 
clones


Hi, linked clones with usb redirection in native mode does not start:

engine error:
VM TestPoolAuto-1 is down with error. Exit message: internal error:
process exited while connecting to monitor: qemu-kvm: -device
piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2: Duplicate ID 'usb' for
device .

We have had this issue fixed in the past. What is version of your
oVirt environment? (That means - upgrade first, test and then let's
see.).

j.


--
Mammoli Cristian
System administrator
T. +39 0731 22911
Via Brodolini 6 | 60035 Jesi (an)

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] usb redirection in native mode does not work in linked clones

2015-08-07 Thread Jiri Belka
 From: Cristian Mammoli c.mamm...@apra.it
 To: users@ovirt.org
 Sent: Monday, July 27, 2015 5:35:45 PM
 Subject: [ovirt-users] usb redirection in native mode does not work in
 linked clones
 
 
 Hi, linked clones with usb redirection in native mode does not start:
 
 engine error:
 VM TestPoolAuto-1 is down with error. Exit message: internal error:
 process exited while connecting to monitor: qemu-kvm: -device
 piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2: Duplicate ID 'usb' for
 device .

We have had this issue fixed in the past. What is version of your
oVirt environment? (That means - upgrade first, test and then let's
see.).

j.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Modem in a VM

2015-01-19 Thread Itamar Heim

On 01/19/2015 12:23 PM, VONDRA Alain wrote:

Hi,
I've tried to use hook hostusb, I've installed vdsm-hook-hostusb.noarch 0:4.16.10-0.el6, and 
followed the documentation on http://www.ovirt.org/Vdsm_Hooks, but the new hook doesn't appear on 
the UI using Edit VM and custom properties.
Is there any other way to install hooks, the documentation is not so clear, and 
I'm not very fine with python.
Thanks


you don't need to know python.
did you run the engine side commands (engine-config -s 
UserDefinedVMProperties... and restarted the engine)?


check http://blog.conoracallahan.com/blog/2014/07/19/ovirt-usb-passthrough/



Alain




Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Itamar Heim [mailto:ih...@redhat.com]
Envoyé : dimanche 18 janvier 2015 11:42
À : VONDRA Alain
Objet : Re: [ovirt-users] USB Modem in a VM

On 01/18/2015 12:36 PM, VONDRA Alain wrote:

Hi,
I didn't try yet this option http://www.ovirt.org/VDSM-Hooks/hostusb
to inject it Do you think it will be a better solution ?


that's the right solution.
I'll reply again on list so folks can help you with it as needed.


Thanks
Alain



Alain VONDRA
Chargé d'exploitation des Systèmes d'Information Direction
Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr





De : Itamar Heim [ih...@redhat.com]
Envoyé : vendredi 16 janvier 2015 19:21 À : VONDRA Alain Objet : Re:
[ovirt-users] USB Modem in a VM

On 01/15/2015 05:56 PM, VONDRA Alain wrote:

Hi,
Thank you for your answer, I've tried to insert my USB modem, but it doesn't up 
in the Windows VM.
I've tried to insert via virt-manager without success, I can't apply the 
modification, however I see the modem using lsusb :

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 
001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 
8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 
8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 
0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 Avocent 
Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 Conexant Systems 
(Rockwell), Inc.

I've unload the cdc_acm kernel module via rmmod without success.
I've also tried to edit the xml appending the ID and VENDDOR tags :

hostdev mode='subsystem' type='usb'
 source
   vendor id='0x0572'/
   product id='0x1321'/
 /source
   /hostdev

Ut at the first load the config disappears...
Do I need to restart the host or restart libvirtd services ?

Thanks for your help
Alain



Alain VONDRA
Chargé d'exploitation des Systèmes d'Information Direction
Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Alon Bar-Lev [mailto:alo...@redhat.com] Envoyé : mardi 13
janvier 2015 17:47 À : VONDRA Alain Cc : users@ovirt.org Objet : Re:
[ovirt-users] USB Modem in a VM



- Original Message -

From: VONDRA Alain avon...@unicef.fr
To: users@ovirt.org
Sent: Tuesday, January 13, 2015 5:55:01 PM
Subject: [ovirt-users]  USB Modem in a VM



Hi,

Can you tell me if I can use an USB modem through one of the
hypervisor hosts to a Windows VM ?

I’d like to install a Windows Fax Server.

Thank you for your answers.



should be possible using qemu args: -usbdevice
host:vendor_id:product_id

in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties:

domain type='kvm'
 name.../name
 …
 devices
   …
   hostdev mode='subsystem' type='usb'
 source
   vendor id='0x@VENDOR@'/
   product id='0x@DEVICE@'/
 /source
   /hostdev
 /devices
/domain

if this option is not exposed in ui you can use vdsm-hooks[1] to modify the 
libvirt configuration and inject such device.

Regards,
Alon

[1] http://www.ovirt.org/VDSM-Hooks
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



have you used http://www.ovirt.org/VDSM-Hooks/hostusb to inject it?





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Modem in a VM

2015-01-19 Thread VONDRA Alain
Yes I made this :
engine-config -s UserDefinedVMProperties=hostusb=0x0572:0x1321
and nothing appear on the Edit VM, only :
- sndbuf
- vhost
- sap_agent
- viodiskattach

Is there any possibility to verify ?
The first command I put engine-config -s 
UserDefinedVMProperties=hostusb=true;another_property=regexp following the 
doc, maybe this option is blocking the hook ?
Alain




Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Itamar Heim [mailto:ih...@redhat.com]
Envoyé : lundi 19 janvier 2015 11:29
À : VONDRA Alain; users@ovirt.org
Objet : Re: [ovirt-users] USB Modem in a VM

On 01/19/2015 12:23 PM, VONDRA Alain wrote:
 Hi,
 I've tried to use hook hostusb, I've installed vdsm-hook-hostusb.noarch 
 0:4.16.10-0.el6, and followed the documentation on 
 http://www.ovirt.org/Vdsm_Hooks, but the new hook doesn't appear on the UI 
 using Edit VM and custom properties.
 Is there any other way to install hooks, the documentation is not so clear, 
 and I'm not very fine with python.
 Thanks

you don't need to know python.
did you run the engine side commands (engine-config -s 
UserDefinedVMProperties... and restarted the engine)?

check http://blog.conoracallahan.com/blog/2014/07/19/ovirt-usb-passthrough/


 Alain




 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 -Message d'origine-
 De : Itamar Heim [mailto:ih...@redhat.com] Envoyé : dimanche 18
 janvier 2015 11:42 À : VONDRA Alain Objet : Re: [ovirt-users] USB
 Modem in a VM

 On 01/18/2015 12:36 PM, VONDRA Alain wrote:
 Hi,
 I didn't try yet this option http://www.ovirt.org/VDSM-Hooks/hostusb
 to inject it Do you think it will be a better solution ?

 that's the right solution.
 I'll reply again on list so folks can help you with it as needed.

 Thanks
 Alain



 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 
 De : Itamar Heim [ih...@redhat.com]
 Envoyé : vendredi 16 janvier 2015 19:21 À : VONDRA Alain Objet : Re:
 [ovirt-users] USB Modem in a VM

 On 01/15/2015 05:56 PM, VONDRA Alain wrote:
 Hi,
 Thank you for your answer, I've tried to insert my USB modem, but it 
 doesn't up in the Windows VM.
 I've tried to insert via virt-manager without success, I can't apply the 
 modification, however I see the modem using lsusb :

 lsusb
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 
 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: 
 ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: 
 ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: 
 ID 0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 
 Avocent Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 
 Conexant Systems (Rockwell), Inc.

 I've unload the cdc_acm kernel module via rmmod without success.
 I've also tried to edit the xml appending the ID and VENDDOR tags :

 hostdev mode='subsystem' type='usb'
  source
vendor id='0x0572'/
product id='0x1321'/
  /source
/hostdev

 Ut at the first load the config disappears...
 Do I need to restart the host or restart libvirtd services ?

 Thanks for your help
 Alain



 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 -Message d'origine-
 De : Alon Bar-Lev [mailto:alo...@redhat.com] Envoyé : mardi 13
 janvier 2015 17:47 À : VONDRA Alain Cc : users@ovirt.org Objet : Re:
 [ovirt-users] USB Modem in a VM



 - Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: users@ovirt.org
 Sent: Tuesday, January 13, 2015 5:55:01 PM
 Subject: [ovirt-users]  USB Modem in a VM



 Hi,

 Can you tell me if I can use an USB modem through one of the
 hypervisor hosts to a Windows VM ?

 I’d like to install a Windows Fax Server.

 Thank you for your answers.


 should be possible using qemu args: -usbdevice
 host:vendor_id:product_id

 in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties:

 domain type='kvm'
  name.../name
  …
  devices
…
hostdev mode='subsystem' type='usb'
  source
vendor id='0x@VENDOR@'/
product id='0x@DEVICE@'/
  /source
/hostdev
  /devices
 /domain

 if this option is not exposed in ui you can use vdsm-hooks[1] to modify the 
 libvirt configuration and inject such device.

 Regards,
 Alon

 [1] http://www.ovirt.org/VDSM-Hooks

Re: [ovirt-users] USB Modem in a VM

2015-01-18 Thread Itamar Heim

On 01/15/2015 05:56 PM, VONDRA Alain wrote:

Hi,
Thank you for your answer, I've tried to insert my USB modem, but it doesn't up 
in the Windows VM.
I've tried to insert via virt-manager without success, I can't apply the 
modification, however I see the modem using lsusb :

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 
001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 
8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 
8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 
0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 Avocent 
Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 Conexant Systems 
(Rockwell), Inc.

I've unload the cdc_acm kernel module via rmmod without success.
I've also tried to edit the xml appending the ID and VENDDOR tags :

  hostdev mode='subsystem' type='usb'
   source
 vendor id='0x0572'/
 product id='0x1321'/
   /source
 /hostdev

Ut at the first load the config disappears...
Do I need to restart the host or restart libvirtd services ?

Thanks for your help
Alain



Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Alon Bar-Lev [mailto:alo...@redhat.com]
Envoyé : mardi 13 janvier 2015 17:47
À : VONDRA Alain
Cc : users@ovirt.org
Objet : Re: [ovirt-users] USB Modem in a VM



- Original Message -

From: VONDRA Alain avon...@unicef.fr
To: users@ovirt.org
Sent: Tuesday, January 13, 2015 5:55:01 PM
Subject: [ovirt-users]  USB Modem in a VM



Hi,

Can you tell me if I can use an USB modem through one of the
hypervisor hosts to a Windows VM ?

I’d like to install a Windows Fax Server.

Thank you for your answers.



should be possible using qemu args: -usbdevice host:vendor_id:product_id

in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties:

domain type='kvm'
   name.../name
   …
   devices
 …
 hostdev mode='subsystem' type='usb'
   source
 vendor id='0x@VENDOR@'/
 product id='0x@DEVICE@'/
   /source
 /hostdev
   /devices
/domain

if this option is not exposed in ui you can use vdsm-hooks[1] to modify the 
libvirt configuration and inject such device.

Regards,
Alon

[1] http://www.ovirt.org/VDSM-Hooks
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



please look at http://www.ovirt.org/VDSM-Hooks/hostusb
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread Martin Polednik
- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek 
 mskri...@redhat.com
 Cc: users@ovirt.org
 Sent: Thursday, January 15, 2015 10:33:19 PM
 Subject: Re: [ovirt-users] USB Modem in a VM
 
 Hi,
 I've tried also to inject the device with virsh attach-device, all seems to
 work but nothing happen in the VM :
 
 [root@unc-srv-hyp2  ~]$ virsh attach-device unc-srv-prnt3 usb-modem.xml
 Please enter your authentication name: root
 Please enter your password:
 Device attached successfully
 
 What did I do wrong, any ideas ?

Hello,
One possibility might be the fact that libvirt itself doesn't have managed mode
for USB devices and I'm not sure virt-manager has the appropriate routine 
handled.

Could you try running
$ virsh nodedev-list
to find the correct usb device and then
# virsh nodedev-detach the_usb_device 
or posibly nodedev-dettach if you run older libvirt?

After that, try starting VM with hostdev element added to XML.

 Regards
 
 
 
 
 
 
 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information
 Direction Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr
 
 
 
 
 
 De : Alon Bar-Lev [alo...@redhat.com]
 Envoyé : jeudi 15 janvier 2015 21:23
 À : VONDRA Alain; Michal Skrivanek
 Cc : users@ovirt.org
 Objet : Re: [ovirt-users]  USB Modem in a VM
 
 Michal, any clue?
 
 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Alon Bar-Lev alo...@redhat.com
  Cc: users@ovirt.org
  Sent: Thursday, January 15, 2015 5:56:47 PM
  Subject: RE: [ovirt-users]  USB Modem in a VM
 
  Hi,
  Thank you for your answer, I've tried to insert my USB modem, but it
  doesn't
  up in the Windows VM.
  I've tried to insert via virt-manager without success, I can't apply the
  modification, however I see the modem using lsusb :
 
  lsusb
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002
  Device
  001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID
  8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID
  8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID
  0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249
  Avocent
  Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 Conexant
  Systems (Rockwell), Inc.
 
  I've unload the cdc_acm kernel module via rmmod without success.
  I've also tried to edit the xml appending the ID and VENDDOR tags :
 
   hostdev mode='subsystem' type='usb'
source
  vendor id='0x0572'/
  product id='0x1321'/
/source
  /hostdev
 
  Ut at the first load the config disappears...
  Do I need to restart the host or restart libvirtd services ?
 
  Thanks for your help
  Alain
 
 
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information
  Direction Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  -Message d'origine-
  De : Alon Bar-Lev [mailto:alo...@redhat.com]
  Envoyé : mardi 13 janvier 2015 17:47
  À : VONDRA Alain
  Cc : users@ovirt.org
  Objet : Re: [ovirt-users] USB Modem in a VM
 
 
 
  - Original Message -
   From: VONDRA Alain avon...@unicef.fr
   To: users@ovirt.org
   Sent: Tuesday, January 13, 2015 5:55:01 PM
   Subject: [ovirt-users]  USB Modem in a VM
  
  
  
   Hi,
  
   Can you tell me if I can use an USB modem through one of the
   hypervisor hosts to a Windows VM ?
  
   I’d like to install a Windows Fax Server.
  
   Thank you for your answers.
 
 
  should be possible using qemu args: -usbdevice host:vendor_id:product_id
 
  in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties:
 
  domain type='kvm'
name.../name
…
devices
  …
  hostdev mode='subsystem' type='usb'
source
  vendor id='0x@VENDOR@'/
  product id='0x@DEVICE@'/
/source
  /hostdev
/devices
  /domain
 
  if this option is not exposed in ui you can use vdsm-hooks[1] to modify the
  libvirt configuration and inject such device.
 
  Regards,
  Alon
 
  [1] http://www.ovirt.org/VDSM-Hooks
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread VONDRA Alain
Hi,
I'm sure of the device, it's clearer with lsusb, you see all the infos about 
the device :

Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
Device Descriptor:
  bLength18
  bDescriptorType 1
  bcdUSB   1.10
  bDeviceClass2 Communications
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize064
  idVendor   0x0572 Conexant Systems (Rockwell), Inc.
  idProduct  0x1321
  bcdDevice1.00
  iManufacturer   1 Conexant
  iProduct2 USB Modem
  iSerial 3 24680246
  bNumConfigurations  2
  Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength   73
bNumInterfaces  2
bConfigurationValue 1
iConfiguration  0
bmAttributes 0x80
  (Bus Powered)
MaxPower  100mA
Interface Descriptor:
  bLength 9
  bDescriptorType 4

With nodedev we just see device nodes, pretty difficult to identify, even with 
--tree opt :

usb_1_0_1_0
usb_1_1
usb_1_1_1_0
usb_1_1_4
usb_1_1_4_1_0
usb_1_1_4_1_1
usb_1_1_6
usb_1_1_6_1
usb_1_1_6_1_0
usb_1_1_6_1_1_0
usb_1_1_6_1_1_1
usb_1_1_6_1_1_2
usb_2_0_1_0
usb_2_1
usb_2_1_1_0
usb_usb1
usb_usb2

The xml injected is, I think right :

hostdev mode='subsystem' type='usb' managed='yes'
source
vendor id='0x0572'/
product id='0x1321'/
/source
/hostdev

Even with The device on the VM xml, the device does'nt appears in the Windows 
VM.
Regards
Alain







Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Martin Polednik [mailto:mpoled...@redhat.com]
Envoyé : vendredi 16 janvier 2015 11:37
À : VONDRA Alain
Cc : Alon Bar-Lev; Michal Skrivanek; users@ovirt.org
Objet : Re: [ovirt-users] USB Modem in a VM

- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
 mskri...@redhat.com
 Cc: users@ovirt.org
 Sent: Thursday, January 15, 2015 10:33:19 PM
 Subject: Re: [ovirt-users] USB Modem in a VM

 Hi,
 I've tried also to inject the device with virsh attach-device, all
 seems to work but nothing happen in the VM :

 [root@unc-srv-hyp2  ~]$ virsh attach-device unc-srv-prnt3
 usb-modem.xml Please enter your authentication name: root Please enter
 your password:
 Device attached successfully

 What did I do wrong, any ideas ?

Hello,
One possibility might be the fact that libvirt itself doesn't have managed mode 
for USB devices and I'm not sure virt-manager has the appropriate routine 
handled.

Could you try running
$ virsh nodedev-list
to find the correct usb device and then
# virsh nodedev-detach the_usb_device
or posibly nodedev-dettach if you run older libvirt?

After that, try starting VM with hostdev element added to XML.

 Regards






 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 
 De : Alon Bar-Lev [alo...@redhat.com]
 Envoyé : jeudi 15 janvier 2015 21:23
 À : VONDRA Alain; Michal Skrivanek
 Cc : users@ovirt.org
 Objet : Re: [ovirt-users]  USB Modem in a VM

 Michal, any clue?

 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Alon Bar-Lev alo...@redhat.com
  Cc: users@ovirt.org
  Sent: Thursday, January 15, 2015 5:56:47 PM
  Subject: RE: [ovirt-users]  USB Modem in a VM
 
  Hi,
  Thank you for your answer, I've tried to insert my USB modem, but it
  doesn't up in the Windows VM.
  I've tried to insert via virt-manager without success, I can't apply
  the modification, however I see the modem using lsusb :
 
  lsusb
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus
  002 Device
  001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002:
  ID
  8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device
  002: ID
  8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device
  003: ID
  0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249
  Avocent Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID
  0572:1321 Conexant Systems (Rockwell), Inc.
 
  I've unload the cdc_acm kernel module via rmmod without success.
  I've also tried to edit the xml appending the ID and VENDDOR tags :
 
   hostdev mode='subsystem' type='usb'
source
  vendor id='0x0572'/
  product id='0x1321'/
/source
  /hostdev
 
  Ut at the first load the config disappears...
  Do I need to restart the host or restart libvirtd services ?
 
  Thanks for your help
  Alain
 
 
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread Martin Polednik


- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Martin Polednik mpoled...@redhat.com
 Cc: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek 
 mskri...@redhat.com, users@ovirt.org
 Sent: Friday, January 16, 2015 12:10:35 PM
 Subject: RE: [ovirt-users] USB Modem in a VM
 
 Hi,
 I'm sure of the device, it's clearer with lsusb, you see all the infos about
 the device :
 
 Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
 Device Descriptor:
   bLength18
   bDescriptorType 1
   bcdUSB   1.10
   bDeviceClass2 Communications
   bDeviceSubClass 0
   bDeviceProtocol 0
   bMaxPacketSize064
   idVendor   0x0572 Conexant Systems (Rockwell), Inc.
   idProduct  0x1321
   bcdDevice1.00
   iManufacturer   1 Conexant
   iProduct2 USB Modem
   iSerial 3 24680246
   bNumConfigurations  2
   Configuration Descriptor:
 bLength 9
 bDescriptorType 2
 wTotalLength   73
 bNumInterfaces  2
 bConfigurationValue 1
 iConfiguration  0
 bmAttributes 0x80
   (Bus Powered)
 MaxPower  100mA
 Interface Descriptor:
   bLength 9
   bDescriptorType 4
 
 With nodedev we just see device nodes, pretty difficult to identify, even
 with --tree opt :
 
 usb_1_0_1_0
 usb_1_1
 usb_1_1_1_0
 usb_1_1_4
 usb_1_1_4_1_0
 usb_1_1_4_1_1
 usb_1_1_6
 usb_1_1_6_1
 usb_1_1_6_1_0
 usb_1_1_6_1_1_0
 usb_1_1_6_1_1_1
 usb_1_1_6_1_1_2
 usb_2_0_1_0
 usb_2_1
 usb_2_1_1_0
 usb_usb1
 usb_usb2

The issue is, you need to get libvirt name of the device and run the 
nodedev-detach
- have you done that with no success?

If not, use some simple script such as (python)

import libvirt

conn = libvirt.openReadOnly()
devices = conn.listAllDevices()
for dev in devices:
print dev.XMLDesc()

to easily find the device and use the name element for nodedev-detach call. 
That should
handle unbinding it from the driver and possibly binding it to some usb stub if 
that exists.
If that doesn't fix it, I admit that I'm not sure what could be the cause apart 
from OS/hw.
 
 The xml injected is, I think right :
 
 hostdev mode='subsystem' type='usb' managed='yes'
 source
 vendor id='0x0572'/
 product id='0x1321'/
 /source
 /hostdev
 
 Even with The device on the VM xml, the device does'nt appears in the Windows
 VM.
 Regards
 Alain
 
 
 
 
 
 
 
 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information
 Direction Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr
 
 
 
 
 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com]
 Envoyé : vendredi 16 janvier 2015 11:37
 À : VONDRA Alain
 Cc : Alon Bar-Lev; Michal Skrivanek; users@ovirt.org
 Objet : Re: [ovirt-users] USB Modem in a VM
 
 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
  mskri...@redhat.com
  Cc: users@ovirt.org
  Sent: Thursday, January 15, 2015 10:33:19 PM
  Subject: Re: [ovirt-users] USB Modem in a VM
 
  Hi,
  I've tried also to inject the device with virsh attach-device, all
  seems to work but nothing happen in the VM :
 
  [root@unc-srv-hyp2  ~]$ virsh attach-device unc-srv-prnt3
  usb-modem.xml Please enter your authentication name: root Please enter
  your password:
  Device attached successfully
 
  What did I do wrong, any ideas ?
 
 Hello,
 One possibility might be the fact that libvirt itself doesn't have managed
 mode for USB devices and I'm not sure virt-manager has the appropriate
 routine handled.
 
 Could you try running
 $ virsh nodedev-list
 to find the correct usb device and then
 # virsh nodedev-detach the_usb_device
 or posibly nodedev-dettach if you run older libvirt?
 
 After that, try starting VM with hostdev element added to XML.
 
  Regards
 
 
 
 
 
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  
  De : Alon Bar-Lev [alo...@redhat.com]
  Envoyé : jeudi 15 janvier 2015 21:23
  À : VONDRA Alain; Michal Skrivanek
  Cc : users@ovirt.org
  Objet : Re: [ovirt-users]  USB Modem in a VM
 
  Michal, any clue?
 
  - Original Message -
   From: VONDRA Alain avon...@unicef.fr
   To: Alon Bar-Lev alo...@redhat.com
   Cc: users@ovirt.org
   Sent: Thursday, January 15, 2015 5:56:47 PM
   Subject: RE: [ovirt-users]  USB Modem in a VM
  
   Hi,
   Thank you for your answer, I've tried to insert my USB modem, but it
   doesn't up in the Windows VM.
   I've tried to insert via virt-manager without success, I can't apply
   the modification, however I see the modem using lsusb :
  
   lsusb

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread Michal Skrivanek

On 16 Jan 2015, at 12:10, VONDRA Alain wrote:

 Hi,
 I'm sure of the device, it's clearer with lsusb, you see all the infos about 
 the device :
 
 Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
 Device Descriptor:
  bLength18
  bDescriptorType 1
  bcdUSB   1.10
  bDeviceClass2 Communications
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize064
  idVendor   0x0572 Conexant Systems (Rockwell), Inc.
  idProduct  0x1321
  bcdDevice1.00
  iManufacturer   1 Conexant
  iProduct2 USB Modem
  iSerial 3 24680246
  bNumConfigurations  2
  Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength   73
bNumInterfaces  2
bConfigurationValue 1
iConfiguration  0
bmAttributes 0x80
  (Bus Powered)
MaxPower  100mA
Interface Descriptor:
  bLength 9
  bDescriptorType 4
 
 With nodedev we just see device nodes, pretty difficult to identify, even 
 with --tree opt :
 
 usb_1_0_1_0
 usb_1_1
 usb_1_1_1_0
 usb_1_1_4
 usb_1_1_4_1_0
 usb_1_1_4_1_1
 usb_1_1_6
 usb_1_1_6_1
 usb_1_1_6_1_0
 usb_1_1_6_1_1_0
 usb_1_1_6_1_1_1
 usb_1_1_6_1_1_2
 usb_2_0_1_0
 usb_2_1
 usb_2_1_1_0
 usb_usb1
 usb_usb2
 
 The xml injected is, I think right :
 
 hostdev mode='subsystem' type='usb' managed='yes'
source
vendor id='0x0572'/
product id='0x1321'/
/source
 /hostdev
 
 Even with The device on the VM xml, the device does'nt appears in the Windows 
 VM.

How do you check it in the guest?
can you try that with Linux guest to see if any device whatsoever shows up?

Thanks,
michal

 Regards
 Alain
 
 
 
 
 
 
 
 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information
 Direction Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr
 
 
 
 
 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com]
 Envoyé : vendredi 16 janvier 2015 11:37
 À : VONDRA Alain
 Cc : Alon Bar-Lev; Michal Skrivanek; users@ovirt.org
 Objet : Re: [ovirt-users] USB Modem in a VM
 
 - Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
 mskri...@redhat.com
 Cc: users@ovirt.org
 Sent: Thursday, January 15, 2015 10:33:19 PM
 Subject: Re: [ovirt-users] USB Modem in a VM
 
 Hi,
 I've tried also to inject the device with virsh attach-device, all
 seems to work but nothing happen in the VM :
 
 [root@unc-srv-hyp2  ~]$ virsh attach-device unc-srv-prnt3
 usb-modem.xml Please enter your authentication name: root Please enter
 your password:
 Device attached successfully
 
 What did I do wrong, any ideas ?
 
 Hello,
 One possibility might be the fact that libvirt itself doesn't have managed 
 mode for USB devices and I'm not sure virt-manager has the appropriate 
 routine handled.
 
 Could you try running
 $ virsh nodedev-list
 to find the correct usb device and then
 # virsh nodedev-detach the_usb_device
 or posibly nodedev-dettach if you run older libvirt?
 
 After that, try starting VM with hostdev element added to XML.
 
 Regards
 
 
 
 
 
 
 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr
 
 
 
 
 
 De : Alon Bar-Lev [alo...@redhat.com]
 Envoyé : jeudi 15 janvier 2015 21:23
 À : VONDRA Alain; Michal Skrivanek
 Cc : users@ovirt.org
 Objet : Re: [ovirt-users]  USB Modem in a VM
 
 Michal, any clue?
 
 - Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Alon Bar-Lev alo...@redhat.com
 Cc: users@ovirt.org
 Sent: Thursday, January 15, 2015 5:56:47 PM
 Subject: RE: [ovirt-users]  USB Modem in a VM
 
 Hi,
 Thank you for your answer, I've tried to insert my USB modem, but it
 doesn't up in the Windows VM.
 I've tried to insert via virt-manager without success, I can't apply
 the modification, however I see the modem using lsusb :
 
 lsusb
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus
 002 Device
 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002:
 ID
 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device
 002: ID
 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device
 003: ID
 0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249
 Avocent Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID
 0572:1321 Conexant Systems (Rockwell), Inc.
 
 I've unload the cdc_acm kernel module via rmmod without success.
 I've also tried to edit the xml appending the ID and VENDDOR tags :
 
 hostdev mode='subsystem' type='usb'
  source
vendor id='0x0572'/
product id='0x1321'/
  /source
/hostdev
 
 Ut at the first load

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread VONDRA Alain
Ok Martin,
I'll try the python script, but I'm a newbie in python, which argumenet I need 
to put to execute it ?
Thank you
Alain




Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Martin Polednik [mailto:mpoled...@redhat.com]
Envoyé : vendredi 16 janvier 2015 12:18
À : VONDRA Alain
Cc : Alon Bar-Lev; Michal Skrivanek; users@ovirt.org
Objet : Re: [ovirt-users] USB Modem in a VM



- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Martin Polednik mpoled...@redhat.com
 Cc: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
 mskri...@redhat.com, users@ovirt.org
 Sent: Friday, January 16, 2015 12:10:35 PM
 Subject: RE: [ovirt-users] USB Modem in a VM

 Hi,
 I'm sure of the device, it's clearer with lsusb, you see all the infos
 about the device :

 Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
 Device Descriptor:
   bLength18
   bDescriptorType 1
   bcdUSB   1.10
   bDeviceClass2 Communications
   bDeviceSubClass 0
   bDeviceProtocol 0
   bMaxPacketSize064
   idVendor   0x0572 Conexant Systems (Rockwell), Inc.
   idProduct  0x1321
   bcdDevice1.00
   iManufacturer   1 Conexant
   iProduct2 USB Modem
   iSerial 3 24680246
   bNumConfigurations  2
   Configuration Descriptor:
 bLength 9
 bDescriptorType 2
 wTotalLength   73
 bNumInterfaces  2
 bConfigurationValue 1
 iConfiguration  0
 bmAttributes 0x80
   (Bus Powered)
 MaxPower  100mA
 Interface Descriptor:
   bLength 9
   bDescriptorType 4

 With nodedev we just see device nodes, pretty difficult to identify,
 even with --tree opt :

 usb_1_0_1_0
 usb_1_1
 usb_1_1_1_0
 usb_1_1_4
 usb_1_1_4_1_0
 usb_1_1_4_1_1
 usb_1_1_6
 usb_1_1_6_1
 usb_1_1_6_1_0
 usb_1_1_6_1_1_0
 usb_1_1_6_1_1_1
 usb_1_1_6_1_1_2
 usb_2_0_1_0
 usb_2_1
 usb_2_1_1_0
 usb_usb1
 usb_usb2

The issue is, you need to get libvirt name of the device and run the 
nodedev-detach
- have you done that with no success?

If not, use some simple script such as (python)

import libvirt

conn = libvirt.openReadOnly()
devices = conn.listAllDevices()
for dev in devices:
print dev.XMLDesc()

to easily find the device and use the name element for nodedev-detach call. 
That should handle unbinding it from the driver and possibly binding it to some 
usb stub if that exists.
If that doesn't fix it, I admit that I'm not sure what could be the cause apart 
from OS/hw.

 The xml injected is, I think right :

 hostdev mode='subsystem' type='usb' managed='yes'
 source
 vendor id='0x0572'/
 product id='0x1321'/
 /source
 /hostdev

 Even with The device on the VM xml, the device does'nt appears in the
 Windows VM.
 Regards
 Alain







 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
 16 janvier 2015 11:37 À : VONDRA Alain Cc : Alon Bar-Lev; Michal
 Skrivanek; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in a VM

 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
  mskri...@redhat.com
  Cc: users@ovirt.org
  Sent: Thursday, January 15, 2015 10:33:19 PM
  Subject: Re: [ovirt-users] USB Modem in a VM
 
  Hi,
  I've tried also to inject the device with virsh attach-device, all
  seems to work but nothing happen in the VM :
 
  [root@unc-srv-hyp2  ~]$ virsh attach-device unc-srv-prnt3
  usb-modem.xml Please enter your authentication name: root Please
  enter your password:
  Device attached successfully
 
  What did I do wrong, any ideas ?

 Hello,
 One possibility might be the fact that libvirt itself doesn't have
 managed mode for USB devices and I'm not sure virt-manager has the
 appropriate routine handled.

 Could you try running
 $ virsh nodedev-list
 to find the correct usb device and then # virsh nodedev-detach
 the_usb_device or posibly nodedev-dettach if you run older libvirt?

 After that, try starting VM with hostdev element added to XML.

  Regards
 
 
 
 
 
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  
  De : Alon Bar-Lev [alo...@redhat.com] Envoyé : jeudi 15 janvier 2015
  21:23 À : VONDRA Alain; Michal Skrivanek Cc : users@ovirt.org Objet
  : Re: [ovirt-users]  USB Modem

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread Martin Polednik


- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Martin Polednik mpoled...@redhat.com
 Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
 Sent: Friday, January 16, 2015 12:30:10 PM
 Subject: Re: [ovirt-users] USB Modem in a VM
 
 Ok Martin,
 I'll try the python script, but I'm a newbie in python, which argumenet I
 need to put to execute it ?
 Thank you
 Alain
 
Simply save it into something like listdevices.py and run $ python 
listdevices.py.
It will list libvirt XML for all of the devices, you just need to find correct
vendor id/product id for your usb device and then use the name for detach
e.g. nodedev-detach usb_usb0.
  
 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information
 Direction Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr
 
 
 
 
 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com]
 Envoyé : vendredi 16 janvier 2015 12:18
 À : VONDRA Alain
 Cc : Alon Bar-Lev; Michal Skrivanek; users@ovirt.org
 Objet : Re: [ovirt-users] USB Modem in a VM
 
 
 
 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Martin Polednik mpoled...@redhat.com
  Cc: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
  mskri...@redhat.com, users@ovirt.org
  Sent: Friday, January 16, 2015 12:10:35 PM
  Subject: RE: [ovirt-users] USB Modem in a VM
 
  Hi,
  I'm sure of the device, it's clearer with lsusb, you see all the infos
  about the device :
 
  Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
  Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB   1.10
bDeviceClass2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize064
idVendor   0x0572 Conexant Systems (Rockwell), Inc.
idProduct  0x1321
bcdDevice1.00
iManufacturer   1 Conexant
iProduct2 USB Modem
iSerial 3 24680246
bNumConfigurations  2
Configuration Descriptor:
  bLength 9
  bDescriptorType 2
  wTotalLength   73
  bNumInterfaces  2
  bConfigurationValue 1
  iConfiguration  0
  bmAttributes 0x80
(Bus Powered)
  MaxPower  100mA
  Interface Descriptor:
bLength 9
bDescriptorType 4
 
  With nodedev we just see device nodes, pretty difficult to identify,
  even with --tree opt :
 
  usb_1_0_1_0
  usb_1_1
  usb_1_1_1_0
  usb_1_1_4
  usb_1_1_4_1_0
  usb_1_1_4_1_1
  usb_1_1_6
  usb_1_1_6_1
  usb_1_1_6_1_0
  usb_1_1_6_1_1_0
  usb_1_1_6_1_1_1
  usb_1_1_6_1_1_2
  usb_2_0_1_0
  usb_2_1
  usb_2_1_1_0
  usb_usb1
  usb_usb2
 
 The issue is, you need to get libvirt name of the device and run the
 nodedev-detach
 - have you done that with no success?
 
 If not, use some simple script such as (python)
 
 import libvirt
 
 conn = libvirt.openReadOnly()
 devices = conn.listAllDevices()
 for dev in devices:
 print dev.XMLDesc()
 
 to easily find the device and use the name element for nodedev-detach call.
 That should handle unbinding it from the driver and possibly binding it to
 some usb stub if that exists.
 If that doesn't fix it, I admit that I'm not sure what could be the cause
 apart from OS/hw.
 
  The xml injected is, I think right :
 
  hostdev mode='subsystem' type='usb' managed='yes'
  source
  vendor id='0x0572'/
  product id='0x1321'/
  /source
  /hostdev
 
  Even with The device on the VM xml, the device does'nt appears in the
  Windows VM.
  Regards
  Alain
 
 
 
 
 
 
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  -Message d'origine-
  De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
  16 janvier 2015 11:37 À : VONDRA Alain Cc : Alon Bar-Lev; Michal
  Skrivanek; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in a VM
 
  - Original Message -
   From: VONDRA Alain avon...@unicef.fr
   To: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
   mskri...@redhat.com
   Cc: users@ovirt.org
   Sent: Thursday, January 15, 2015 10:33:19 PM
   Subject: Re: [ovirt-users] USB Modem in a VM
  
   Hi,
   I've tried also to inject the device with virsh attach-device, all
   seems to work but nothing happen in the VM :
  
   [root@unc-srv-hyp2  ~]$ virsh attach-device unc-srv-prnt3
   usb-modem.xml Please enter your authentication name: root Please
   enter your password:
   Device attached successfully
  
   What did I do wrong, any ideas ?
 
  Hello,
  One possibility might be the fact that libvirt itself doesn't have
  managed mode for USB devices and I'm not sure virt-manager has the
  appropriate routine

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread VONDRA Alain
Hi Martin,
That's what I've done, but the result is a missing argument.

[root@unc-srv-hyp2  ~]$ python2.6 usb_dev.py
Traceback (most recent call last):
  File usb_dev.py, line 4, in module
conn = libvirt.openReadOnly()
TypeError: openReadOnly() takes exactly 1 argument (0 given

Alain




Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Martin Polednik [mailto:mpoled...@redhat.com]
Envoyé : vendredi 16 janvier 2015 13:18
À : VONDRA Alain
Cc : users@ovirt.org; Michal Skrivanek
Objet : Re: [ovirt-users] USB Modem in a VM



- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Martin Polednik mpoled...@redhat.com
 Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
 Sent: Friday, January 16, 2015 12:30:10 PM
 Subject: Re: [ovirt-users] USB Modem in a VM

 Ok Martin,
 I'll try the python script, but I'm a newbie in python, which
 argumenet I need to put to execute it ?
 Thank you
 Alain

Simply save it into something like listdevices.py and run $ python 
listdevices.py.
It will list libvirt XML for all of the devices, you just need to find correct 
vendor id/product id for your usb device and then use the name for detach e.g. 
nodedev-detach usb_usb0.

 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
 16 janvier 2015 12:18 À : VONDRA Alain Cc : Alon Bar-Lev; Michal
 Skrivanek; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in a VM



 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Martin Polednik mpoled...@redhat.com
  Cc: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
  mskri...@redhat.com, users@ovirt.org
  Sent: Friday, January 16, 2015 12:10:35 PM
  Subject: RE: [ovirt-users] USB Modem in a VM
 
  Hi,
  I'm sure of the device, it's clearer with lsusb, you see all the
  infos about the device :
 
  Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
  Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB   1.10
bDeviceClass2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize064
idVendor   0x0572 Conexant Systems (Rockwell), Inc.
idProduct  0x1321
bcdDevice1.00
iManufacturer   1 Conexant
iProduct2 USB Modem
iSerial 3 24680246
bNumConfigurations  2
Configuration Descriptor:
  bLength 9
  bDescriptorType 2
  wTotalLength   73
  bNumInterfaces  2
  bConfigurationValue 1
  iConfiguration  0
  bmAttributes 0x80
(Bus Powered)
  MaxPower  100mA
  Interface Descriptor:
bLength 9
bDescriptorType 4
 
  With nodedev we just see device nodes, pretty difficult to identify,
  even with --tree opt :
 
  usb_1_0_1_0
  usb_1_1
  usb_1_1_1_0
  usb_1_1_4
  usb_1_1_4_1_0
  usb_1_1_4_1_1
  usb_1_1_6
  usb_1_1_6_1
  usb_1_1_6_1_0
  usb_1_1_6_1_1_0
  usb_1_1_6_1_1_1
  usb_1_1_6_1_1_2
  usb_2_0_1_0
  usb_2_1
  usb_2_1_1_0
  usb_usb1
  usb_usb2

 The issue is, you need to get libvirt name of the device and run the
 nodedev-detach
 - have you done that with no success?

 If not, use some simple script such as (python)

 import libvirt

 conn = libvirt.openReadOnly()
 devices = conn.listAllDevices()
 for dev in devices:
 print dev.XMLDesc()

 to easily find the device and use the name element for nodedev-detach call.
 That should handle unbinding it from the driver and possibly binding
 it to some usb stub if that exists.
 If that doesn't fix it, I admit that I'm not sure what could be the
 cause apart from OS/hw.

  The xml injected is, I think right :
 
  hostdev mode='subsystem' type='usb' managed='yes'
  source
  vendor id='0x0572'/
  product id='0x1321'/
  /source
  /hostdev
 
  Even with The device on the VM xml, the device does'nt appears in
  the Windows VM.
  Regards
  Alain
 
 
 
 
 
 
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  -Message d'origine-
  De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
  16 janvier 2015 11:37 À : VONDRA Alain Cc : Alon Bar-Lev; Michal
  Skrivanek; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in a
  VM
 
  - Original Message -
   From: VONDRA Alain avon...@unicef.fr
   To: Alon Bar-Lev alo...@redhat.com

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread Martin Polednik


- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Martin Polednik mpoled...@redhat.com
 Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
 Sent: Friday, January 16, 2015 2:45:09 PM
 Subject: Re: [ovirt-users] USB Modem in a VM
 
 Hi Martin,
 That's what I've done, but the result is a missing argument.
 
 [root@unc-srv-hyp2  ~]$ python2.6 usb_dev.py
 Traceback (most recent call last):
   File usb_dev.py, line 4, in module
 conn = libvirt.openReadOnly()
 TypeError: openReadOnly() takes exactly 1 argument (0 given

My mistake, you can use openReadOnly(0) (can be omitted for some libvirt 
versions).

 Alain
 
 
 
 
 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information
 Direction Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr
 
 
 
 
 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com]
 Envoyé : vendredi 16 janvier 2015 13:18
 À : VONDRA Alain
 Cc : users@ovirt.org; Michal Skrivanek
 Objet : Re: [ovirt-users] USB Modem in a VM
 
 
 
 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Martin Polednik mpoled...@redhat.com
  Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
  Sent: Friday, January 16, 2015 12:30:10 PM
  Subject: Re: [ovirt-users] USB Modem in a VM
 
  Ok Martin,
  I'll try the python script, but I'm a newbie in python, which
  argumenet I need to put to execute it ?
  Thank you
  Alain
 
 Simply save it into something like listdevices.py and run $ python
 listdevices.py.
 It will list libvirt XML for all of the devices, you just need to find
 correct vendor id/product id for your usb device and then use the name for
 detach e.g. nodedev-detach usb_usb0.
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  -Message d'origine-
  De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
  16 janvier 2015 12:18 À : VONDRA Alain Cc : Alon Bar-Lev; Michal
  Skrivanek; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in a VM
 
 
 
  - Original Message -
   From: VONDRA Alain avon...@unicef.fr
   To: Martin Polednik mpoled...@redhat.com
   Cc: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
   mskri...@redhat.com, users@ovirt.org
   Sent: Friday, January 16, 2015 12:10:35 PM
   Subject: RE: [ovirt-users] USB Modem in a VM
  
   Hi,
   I'm sure of the device, it's clearer with lsusb, you see all the
   infos about the device :
  
   Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
   Device Descriptor:
 bLength18
 bDescriptorType 1
 bcdUSB   1.10
 bDeviceClass2 Communications
 bDeviceSubClass 0
 bDeviceProtocol 0
 bMaxPacketSize064
 idVendor   0x0572 Conexant Systems (Rockwell), Inc.
 idProduct  0x1321
 bcdDevice1.00
 iManufacturer   1 Conexant
 iProduct2 USB Modem
 iSerial 3 24680246
 bNumConfigurations  2
 Configuration Descriptor:
   bLength 9
   bDescriptorType 2
   wTotalLength   73
   bNumInterfaces  2
   bConfigurationValue 1
   iConfiguration  0
   bmAttributes 0x80
 (Bus Powered)
   MaxPower  100mA
   Interface Descriptor:
 bLength 9
 bDescriptorType 4
  
   With nodedev we just see device nodes, pretty difficult to identify,
   even with --tree opt :
  
   usb_1_0_1_0
   usb_1_1
   usb_1_1_1_0
   usb_1_1_4
   usb_1_1_4_1_0
   usb_1_1_4_1_1
   usb_1_1_6
   usb_1_1_6_1
   usb_1_1_6_1_0
   usb_1_1_6_1_1_0
   usb_1_1_6_1_1_1
   usb_1_1_6_1_1_2
   usb_2_0_1_0
   usb_2_1
   usb_2_1_1_0
   usb_usb1
   usb_usb2
 
  The issue is, you need to get libvirt name of the device and run the
  nodedev-detach
  - have you done that with no success?
 
  If not, use some simple script such as (python)
 
  import libvirt
 
  conn = libvirt.openReadOnly()
  devices = conn.listAllDevices()
  for dev in devices:
  print dev.XMLDesc()
 
  to easily find the device and use the name element for nodedev-detach
  call.
  That should handle unbinding it from the driver and possibly binding
  it to some usb stub if that exists.
  If that doesn't fix it, I admit that I'm not sure what could be the
  cause apart from OS/hw.
 
   The xml injected is, I think right :
  
   hostdev mode='subsystem' type='usb' managed='yes'
   source
   vendor id='0x0572'/
   product id='0x1321'/
   /source
   /hostdev
  
   Even with The device on the VM xml, the device does'nt appears in
   the Windows VM.
   Regards
   Alain
  
  
  
  
  
  
  
   Alain VONDRA
   Chargé d'exploitation

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread VONDRA Alain
I've replaced with openReadOnly(0), but had a argument 1 must be string or 
None, not int issue, so I changed to None, but I had :

[root@unc-srv-hyp2  ~]$ python2.6 usb_dev.py
Traceback (most recent call last):
  File usb_dev.py, line 5, in module
devices = conn.listAllDevices()
TypeError: listAllDevices() takes exactly 2 arguments (1 given)

I put the VM name in openReadOnly(unc-srv-prnt3) and I had this issue :

libvirt:  error : no connection driver available for unc-srv-prnt3
Traceback (most recent call last):
  File usb_dev.py, line 4, in module
conn = libvirt.openReadOnly(unc-srv-prnt3)
  File /usr/lib64/python2.6/site-packages/libvirt.py, line 247, in 
openReadOnly
if ret is None:raise libvirtError('virConnectOpenReadOnly() failed')
libvirt.libvirtError: no connection driver available for unc-srv-prnt3

What's wrong ?








Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Martin Polednik [mailto:mpoled...@redhat.com]
Envoyé : vendredi 16 janvier 2015 15:47
À : VONDRA Alain
Cc : users@ovirt.org; Michal Skrivanek
Objet : Re: [ovirt-users] USB Modem in a VM



- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Martin Polednik mpoled...@redhat.com
 Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
 Sent: Friday, January 16, 2015 2:45:09 PM
 Subject: Re: [ovirt-users] USB Modem in a VM

 Hi Martin,
 That's what I've done, but the result is a missing argument.

 [root@unc-srv-hyp2  ~]$ python2.6 usb_dev.py Traceback (most recent
 call last):
   File usb_dev.py, line 4, in module
 conn = libvirt.openReadOnly()
 TypeError: openReadOnly() takes exactly 1 argument (0 given

My mistake, you can use openReadOnly(0) (can be omitted for some libvirt 
versions).

 Alain




 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
 16 janvier 2015 13:18 À : VONDRA Alain Cc : users@ovirt.org; Michal
 Skrivanek Objet : Re: [ovirt-users] USB Modem in a VM



 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Martin Polednik mpoled...@redhat.com
  Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
  Sent: Friday, January 16, 2015 12:30:10 PM
  Subject: Re: [ovirt-users] USB Modem in a VM
 
  Ok Martin,
  I'll try the python script, but I'm a newbie in python, which
  argumenet I need to put to execute it ?
  Thank you
  Alain

 Simply save it into something like listdevices.py and run $ python
 listdevices.py.
 It will list libvirt XML for all of the devices, you just need to find
 correct vendor id/product id for your usb device and then use the name
 for detach e.g. nodedev-detach usb_usb0.

  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  -Message d'origine-
  De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
  16 janvier 2015 12:18 À : VONDRA Alain Cc : Alon Bar-Lev; Michal
  Skrivanek; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in a
  VM
 
 
 
  - Original Message -
   From: VONDRA Alain avon...@unicef.fr
   To: Martin Polednik mpoled...@redhat.com
   Cc: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
   mskri...@redhat.com, users@ovirt.org
   Sent: Friday, January 16, 2015 12:10:35 PM
   Subject: RE: [ovirt-users] USB Modem in a VM
  
   Hi,
   I'm sure of the device, it's clearer with lsusb, you see all the
   infos about the device :
  
   Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
   Device Descriptor:
 bLength18
 bDescriptorType 1
 bcdUSB   1.10
 bDeviceClass2 Communications
 bDeviceSubClass 0
 bDeviceProtocol 0
 bMaxPacketSize064
 idVendor   0x0572 Conexant Systems (Rockwell), Inc.
 idProduct  0x1321
 bcdDevice1.00
 iManufacturer   1 Conexant
 iProduct2 USB Modem
 iSerial 3 24680246
 bNumConfigurations  2
 Configuration Descriptor:
   bLength 9
   bDescriptorType 2
   wTotalLength   73
   bNumInterfaces  2
   bConfigurationValue 1
   iConfiguration  0
   bmAttributes 0x80
 (Bus Powered)
   MaxPower  100mA
   Interface Descriptor:
 bLength 9
 bDescriptorType 4
  
   With nodedev we just see device nodes, pretty difficult to
   identify, even with --tree opt

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread Martin Polednik


- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Martin Polednik mpoled...@redhat.com
 Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
 Sent: Friday, January 16, 2015 4:00:28 PM
 Subject: RE: [ovirt-users] USB Modem in a VM
 
 I've replaced with openReadOnly(0), but had a argument 1 must be string or
 None, not int issue, so I changed to None, but I had :
 
 [root@unc-srv-hyp2  ~]$ python2.6 usb_dev.py
 Traceback (most recent call last):
   File usb_dev.py, line 5, in module
 devices = conn.listAllDevices()
 TypeError: listAllDevices() takes exactly 2 arguments (1 given)
 
 I put the VM name in openReadOnly(unc-srv-prnt3) and I had this issue :
 
 libvirt:  error : no connection driver available for unc-srv-prnt3
 Traceback (most recent call last):
   File usb_dev.py, line 4, in module
 conn = libvirt.openReadOnly(unc-srv-prnt3)
   File /usr/lib64/python2.6/site-packages/libvirt.py, line 247, in
   openReadOnly
 if ret is None:raise libvirtError('virConnectOpenReadOnly() failed')
 libvirt.libvirtError: no connection driver available for unc-srv-prnt3
 
 What's wrong ?
 
Missing flags parameter again, which version of libvirt are you running?
openReadOnly(0) and listAllDevices(0) should be correct for your version,
sorry for that again.   
 
 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information
 Direction Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr
 
 
 
 
 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com]
 Envoyé : vendredi 16 janvier 2015 15:47
 À : VONDRA Alain
 Cc : users@ovirt.org; Michal Skrivanek
 Objet : Re: [ovirt-users] USB Modem in a VM
 
 
 
 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Martin Polednik mpoled...@redhat.com
  Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
  Sent: Friday, January 16, 2015 2:45:09 PM
  Subject: Re: [ovirt-users] USB Modem in a VM
 
  Hi Martin,
  That's what I've done, but the result is a missing argument.
 
  [root@unc-srv-hyp2  ~]$ python2.6 usb_dev.py Traceback (most recent
  call last):
File usb_dev.py, line 4, in module
  conn = libvirt.openReadOnly()
  TypeError: openReadOnly() takes exactly 1 argument (0 given
 
 My mistake, you can use openReadOnly(0) (can be omitted for some libvirt
 versions).
 
  Alain
 
 
 
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  -Message d'origine-
  De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
  16 janvier 2015 13:18 À : VONDRA Alain Cc : users@ovirt.org; Michal
  Skrivanek Objet : Re: [ovirt-users] USB Modem in a VM
 
 
 
  - Original Message -
   From: VONDRA Alain avon...@unicef.fr
   To: Martin Polednik mpoled...@redhat.com
   Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
   Sent: Friday, January 16, 2015 12:30:10 PM
   Subject: Re: [ovirt-users] USB Modem in a VM
  
   Ok Martin,
   I'll try the python script, but I'm a newbie in python, which
   argumenet I need to put to execute it ?
   Thank you
   Alain
 
  Simply save it into something like listdevices.py and run $ python
  listdevices.py.
  It will list libvirt XML for all of the devices, you just need to find
  correct vendor id/product id for your usb device and then use the name
  for detach e.g. nodedev-detach usb_usb0.
 
   Alain VONDRA
   Chargé d'exploitation des Systèmes d'Information Direction
   Administrative et Financière
   +33 1 44 39 77 76
   UNICEF France
   3 rue Duguay Trouin  75006 PARIS
   www.unicef.fr
  
  
  
  
   -Message d'origine-
   De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
   16 janvier 2015 12:18 À : VONDRA Alain Cc : Alon Bar-Lev; Michal
   Skrivanek; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in a
   VM
  
  
  
   - Original Message -
From: VONDRA Alain avon...@unicef.fr
To: Martin Polednik mpoled...@redhat.com
Cc: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
mskri...@redhat.com, users@ovirt.org
Sent: Friday, January 16, 2015 12:10:35 PM
Subject: RE: [ovirt-users] USB Modem in a VM
   
Hi,
I'm sure of the device, it's clearer with lsusb, you see all the
infos about the device :
   
Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
Device Descriptor:
  bLength18
  bDescriptorType 1
  bcdUSB   1.10
  bDeviceClass2 Communications
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize064
  idVendor   0x0572 Conexant Systems (Rockwell), Inc.
  idProduct  0x1321
  bcdDevice1.00
  iManufacturer   1 Conexant
  iProduct2 USB Modem
  iSerial

Re: [ovirt-users] USB Modem in a VM

2015-01-16 Thread VONDRA Alain
I've got libvirt-0.10.2-46 version.





Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Martin Polednik [mailto:mpoled...@redhat.com]
Envoyé : vendredi 16 janvier 2015 17:11
À : VONDRA Alain
Cc : users@ovirt.org; Michal Skrivanek
Objet : Re: [ovirt-users] USB Modem in a VM



- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Martin Polednik mpoled...@redhat.com
 Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
 Sent: Friday, January 16, 2015 4:00:28 PM
 Subject: RE: [ovirt-users] USB Modem in a VM

 I've replaced with openReadOnly(0), but had a argument 1 must be
 string or None, not int issue, so I changed to None, but I had :

 [root@unc-srv-hyp2  ~]$ python2.6 usb_dev.py Traceback (most recent
 call last):
   File usb_dev.py, line 5, in module
 devices = conn.listAllDevices()
 TypeError: listAllDevices() takes exactly 2 arguments (1 given)

 I put the VM name in openReadOnly(unc-srv-prnt3) and I had this issue :

 libvirt:  error : no connection driver available for unc-srv-prnt3
 Traceback (most recent call last):
   File usb_dev.py, line 4, in module
 conn = libvirt.openReadOnly(unc-srv-prnt3)
   File /usr/lib64/python2.6/site-packages/libvirt.py, line 247, in
   openReadOnly
 if ret is None:raise libvirtError('virConnectOpenReadOnly()
 failed')
 libvirt.libvirtError: no connection driver available for unc-srv-prnt3

 What's wrong ?

Missing flags parameter again, which version of libvirt are you running?
openReadOnly(0) and listAllDevices(0) should be correct for your version,
sorry for that again.

 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information Direction
 Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 -Message d'origine-
 De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
 16 janvier 2015 15:47 À : VONDRA Alain Cc : users@ovirt.org; Michal
 Skrivanek Objet : Re: [ovirt-users] USB Modem in a VM



 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: Martin Polednik mpoled...@redhat.com
  Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
  Sent: Friday, January 16, 2015 2:45:09 PM
  Subject: Re: [ovirt-users] USB Modem in a VM
 
  Hi Martin,
  That's what I've done, but the result is a missing argument.
 
  [root@unc-srv-hyp2  ~]$ python2.6 usb_dev.py Traceback (most recent
  call last):
File usb_dev.py, line 4, in module
  conn = libvirt.openReadOnly()
  TypeError: openReadOnly() takes exactly 1 argument (0 given

 My mistake, you can use openReadOnly(0) (can be omitted for some
 libvirt versions).

  Alain
 
 
 
 
  Alain VONDRA
  Chargé d'exploitation des Systèmes d'Information Direction
  Administrative et Financière
  +33 1 44 39 77 76
  UNICEF France
  3 rue Duguay Trouin  75006 PARIS
  www.unicef.fr
 
 
 
 
  -Message d'origine-
  De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé : vendredi
  16 janvier 2015 13:18 À : VONDRA Alain Cc : users@ovirt.org; Michal
  Skrivanek Objet : Re: [ovirt-users] USB Modem in a VM
 
 
 
  - Original Message -
   From: VONDRA Alain avon...@unicef.fr
   To: Martin Polednik mpoled...@redhat.com
   Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com
   Sent: Friday, January 16, 2015 12:30:10 PM
   Subject: Re: [ovirt-users] USB Modem in a VM
  
   Ok Martin,
   I'll try the python script, but I'm a newbie in python, which
   argumenet I need to put to execute it ?
   Thank you
   Alain
 
  Simply save it into something like listdevices.py and run $ python
  listdevices.py.
  It will list libvirt XML for all of the devices, you just need to
  find correct vendor id/product id for your usb device and then use
  the name for detach e.g. nodedev-detach usb_usb0.
 
   Alain VONDRA
   Chargé d'exploitation des Systèmes d'Information Direction
   Administrative et Financière
   +33 1 44 39 77 76
   UNICEF France
   3 rue Duguay Trouin  75006 PARIS
   www.unicef.fr
  
  
  
  
   -Message d'origine-
   De : Martin Polednik [mailto:mpoled...@redhat.com] Envoyé :
   vendredi
   16 janvier 2015 12:18 À : VONDRA Alain Cc : Alon Bar-Lev; Michal
   Skrivanek; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in
   a VM
  
  
  
   - Original Message -
From: VONDRA Alain avon...@unicef.fr
To: Martin Polednik mpoled...@redhat.com
Cc: Alon Bar-Lev alo...@redhat.com, Michal Skrivanek
mskri...@redhat.com, users@ovirt.org
Sent: Friday, January 16, 2015 12:10:35 PM
Subject: RE: [ovirt-users] USB Modem in a VM
   
Hi,
I'm sure of the device, it's clearer with lsusb, you see all the
infos about the device :
   
Bus 001 Device 006: ID 0572:1321 Conexant Systems (Rockwell), Inc.
Device Descriptor:
  bLength18

Re: [ovirt-users] USB Modem in a VM

2015-01-15 Thread VONDRA Alain
Hi,
Thank you for your answer, I've tried to insert my USB modem, but it doesn't up 
in the Windows VM.
I've tried to insert via virt-manager without success, I can't apply the 
modification, however I see the modem using lsusb :

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 
001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 
8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 
8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 
0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 Avocent 
Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 Conexant Systems 
(Rockwell), Inc.

I've unload the cdc_acm kernel module via rmmod without success.
I've also tried to edit the xml appending the ID and VENDDOR tags :

 hostdev mode='subsystem' type='usb'
  source
vendor id='0x0572'/
product id='0x1321'/
  /source
/hostdev

Ut at the first load the config disappears...
Do I need to restart the host or restart libvirtd services ?

Thanks for your help
Alain



Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr




-Message d'origine-
De : Alon Bar-Lev [mailto:alo...@redhat.com]
Envoyé : mardi 13 janvier 2015 17:47
À : VONDRA Alain
Cc : users@ovirt.org
Objet : Re: [ovirt-users] USB Modem in a VM



- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: users@ovirt.org
 Sent: Tuesday, January 13, 2015 5:55:01 PM
 Subject: [ovirt-users]  USB Modem in a VM



 Hi,

 Can you tell me if I can use an USB modem through one of the
 hypervisor hosts to a Windows VM ?

 I’d like to install a Windows Fax Server.

 Thank you for your answers.


should be possible using qemu args: -usbdevice host:vendor_id:product_id

in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties:

domain type='kvm'
  name.../name
  …
  devices
…
hostdev mode='subsystem' type='usb'
  source
vendor id='0x@VENDOR@'/
product id='0x@DEVICE@'/
  /source
/hostdev
  /devices
/domain

if this option is not exposed in ui you can use vdsm-hooks[1] to modify the 
libvirt configuration and inject such device.

Regards,
Alon

[1] http://www.ovirt.org/VDSM-Hooks
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Modem in a VM

2015-01-15 Thread VONDRA Alain
Hi,
I've tried also to inject the device with virsh attach-device, all seems to 
work but nothing happen in the VM :

[root@unc-srv-hyp2  ~]$ virsh attach-device unc-srv-prnt3 usb-modem.xml
Please enter your authentication name: root
Please enter your password:
Device attached successfully

What did I do wrong, any ideas ?
Regards






Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin  75006 PARIS
www.unicef.fr





De : Alon Bar-Lev [alo...@redhat.com]
Envoyé : jeudi 15 janvier 2015 21:23
À : VONDRA Alain; Michal Skrivanek
Cc : users@ovirt.org
Objet : Re: [ovirt-users]  USB Modem in a VM

Michal, any clue?

- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Alon Bar-Lev alo...@redhat.com
 Cc: users@ovirt.org
 Sent: Thursday, January 15, 2015 5:56:47 PM
 Subject: RE: [ovirt-users]  USB Modem in a VM

 Hi,
 Thank you for your answer, I've tried to insert my USB modem, but it doesn't
 up in the Windows VM.
 I've tried to insert via virt-manager without success, I can't apply the
 modification, however I see the modem using lsusb :

 lsusb
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device
 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID
 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID
 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID
 0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 Avocent
 Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 Conexant
 Systems (Rockwell), Inc.

 I've unload the cdc_acm kernel module via rmmod without success.
 I've also tried to edit the xml appending the ID and VENDDOR tags :

  hostdev mode='subsystem' type='usb'
   source
 vendor id='0x0572'/
 product id='0x1321'/
   /source
 /hostdev

 Ut at the first load the config disappears...
 Do I need to restart the host or restart libvirtd services ?

 Thanks for your help
 Alain



 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information
 Direction Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr




 -Message d'origine-
 De : Alon Bar-Lev [mailto:alo...@redhat.com]
 Envoyé : mardi 13 janvier 2015 17:47
 À : VONDRA Alain
 Cc : users@ovirt.org
 Objet : Re: [ovirt-users] USB Modem in a VM



 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: users@ovirt.org
  Sent: Tuesday, January 13, 2015 5:55:01 PM
  Subject: [ovirt-users]  USB Modem in a VM
 
 
 
  Hi,
 
  Can you tell me if I can use an USB modem through one of the
  hypervisor hosts to a Windows VM ?
 
  I’d like to install a Windows Fax Server.
 
  Thank you for your answers.


 should be possible using qemu args: -usbdevice host:vendor_id:product_id

 in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties:

 domain type='kvm'
   name.../name
   …
   devices
 …
 hostdev mode='subsystem' type='usb'
   source
 vendor id='0x@VENDOR@'/
 product id='0x@DEVICE@'/
   /source
 /hostdev
   /devices
 /domain

 if this option is not exposed in ui you can use vdsm-hooks[1] to modify the
 libvirt configuration and inject such device.

 Regards,
 Alon

 [1] http://www.ovirt.org/VDSM-Hooks

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Modem in a VM

2015-01-15 Thread Alon Bar-Lev

Michal, any clue?

- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: Alon Bar-Lev alo...@redhat.com
 Cc: users@ovirt.org
 Sent: Thursday, January 15, 2015 5:56:47 PM
 Subject: RE: [ovirt-users]  USB Modem in a VM
 
 Hi,
 Thank you for your answer, I've tried to insert my USB modem, but it doesn't
 up in the Windows VM.
 I've tried to insert via virt-manager without success, I can't apply the
 modification, however I see the modem using lsusb :
 
 lsusb
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device
 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID
 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID
 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID
 0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 Avocent
 Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 Conexant
 Systems (Rockwell), Inc.
 
 I've unload the cdc_acm kernel module via rmmod without success.
 I've also tried to edit the xml appending the ID and VENDDOR tags :
 
  hostdev mode='subsystem' type='usb'
   source
 vendor id='0x0572'/
 product id='0x1321'/
   /source
 /hostdev
 
 Ut at the first load the config disappears...
 Do I need to restart the host or restart libvirtd services ?
 
 Thanks for your help
 Alain
 
 
 
 Alain VONDRA
 Chargé d'exploitation des Systèmes d'Information
 Direction Administrative et Financière
 +33 1 44 39 77 76
 UNICEF France
 3 rue Duguay Trouin  75006 PARIS
 www.unicef.fr
 
 
 
 
 -Message d'origine-
 De : Alon Bar-Lev [mailto:alo...@redhat.com]
 Envoyé : mardi 13 janvier 2015 17:47
 À : VONDRA Alain
 Cc : users@ovirt.org
 Objet : Re: [ovirt-users] USB Modem in a VM
 
 
 
 - Original Message -
  From: VONDRA Alain avon...@unicef.fr
  To: users@ovirt.org
  Sent: Tuesday, January 13, 2015 5:55:01 PM
  Subject: [ovirt-users]  USB Modem in a VM
 
 
 
  Hi,
 
  Can you tell me if I can use an USB modem through one of the
  hypervisor hosts to a Windows VM ?
 
  I’d like to install a Windows Fax Server.
 
  Thank you for your answers.
 
 
 should be possible using qemu args: -usbdevice host:vendor_id:product_id
 
 in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties:
 
 domain type='kvm'
   name.../name
   …
   devices
 …
 hostdev mode='subsystem' type='usb'
   source
 vendor id='0x@VENDOR@'/
 product id='0x@DEVICE@'/
   /source
 /hostdev
   /devices
 /domain
 
 if this option is not exposed in ui you can use vdsm-hooks[1] to modify the
 libvirt configuration and inject such device.
 
 Regards,
 Alon
 
 [1] http://www.ovirt.org/VDSM-Hooks
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Modem in a VM

2015-01-13 Thread Alon Bar-Lev


- Original Message -
 From: VONDRA Alain avon...@unicef.fr
 To: users@ovirt.org
 Sent: Tuesday, January 13, 2015 5:55:01 PM
 Subject: [ovirt-users]  USB Modem in a VM
 
 
 
 Hi,
 
 Can you tell me if I can use an USB modem through one of the hypervisor hosts
 to a Windows VM ?
 
 I’d like to install a Windows Fax Server.
 
 Thank you for your answers.


should be possible using qemu args: -usbdevice host:vendor_id:product_id

in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties:

domain type='kvm'
  name.../name
  …
  devices
…
hostdev mode='subsystem' type='usb'
  source
vendor id='0x@VENDOR@'/
product id='0x@DEVICE@'/
  /source
/hostdev
  /devices
/domain

if this option is not exposed in ui you can use vdsm-hooks[1] to modify the 
libvirt configuration and inject such device.

Regards,
Alon

[1] http://www.ovirt.org/VDSM-Hooks
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-27 Thread Yaniv Dary
Maybe this should be added to the oVirt wiki? 

Yaniv 

- Original Message -

 From: Juan Jose jj197...@gmail.com
 To: u...@redhat.com
 Cc: users@ovirt.org List users@ovirt.org, Lev Veyde lve...@redhat.com
 Sent: Wednesday, November 26, 2014 2:46:40 PM
 Subject: Re: [ovirt-users] USB redirect

 Thank you very much Uri and everybody,

 Best regards,

 Juanjo.

 On Wed, Nov 26, 2014 at 1:01 PM, Uri Lublin  u...@redhat.com  wrote:

  On 11/23/2014 10:42 AM, Lev Veyde wrote:
 

   Hi Michal,
  
 

   As far as I know there is no need to install something inside VM for the
   Native USB redirection to function properly, thus nothing related is
   included on the oVirt WGT ISO.
  
 

  Hi,
 

  Lev, you are correct; there is nothing to install on the guest for Spice
  Native USB.
 

  On the client side there is a need for remote-viewer to be configured with
  USB redir enabled,
 
  and having access to the device (via libusb).
 
  On a Windows client currently we use WinUSB driver to enable access to the
  USB device.
 
  The driver can be installed using the usbclerk service or manually (e.g.
  with
  Zadig).
 
  It must be installed for each device to be redirected.
 

  On Ovirt, as mentioned, Native Spice USB option has to be enabled.
 
  (This would also add the virtual usb devices needed on the
  qemu-kvm/spice-server side).
 

  Hope that helps,
 
  Uri.
 

   The user/admin only needs to properly configure the VM for Native USB
   redirection and install the Spice client.
  
 

   I forwarded the issue to the Spice team, they could properly point to the
   issue.
  
 

   Thanks in advance,
  
 
   Lev Veyde.
  
 

   - Original Message -
  
 
   From: Michal Skrivanek  michal.skriva...@redhat.com 
  
 
   To: Juan Jose  jj197...@gmail.com , Lev Veyde  lve...@redhat.com 
  
 
   Cc:  users@ovirt.org List  users@ovirt.org 
  
 
   Sent: Friday, November 21, 2014 3:07:09 PM
  
 
   Subject: Re: [ovirt-users] USB redirect
  
 

   On Nov 13, 2014, at 12:00 , Juan Jose  jj197...@gmail.com  wrote:
  
 

Hello Michal and everybody,
   
  
 

I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me
but
the driver usbredir is not there. Is it normal or maybe it is in
another
resource?
   
  
 

As the oVirt documentation says, when this driver is installed a new
USB
windows service will be started in the client, but after execute the
ovirt-guest-tool setup and finish the installation there is not any USB
new
service in my Windows client.
   
  
 

Is it possible that this usbredir driver is not in this ISO?
   
  
 

   adding Lev who builds the ISO…can you please check?
  
 

   Thanks,
  
 
   michal
  
 

Many thanks in advanced,
   
  
 

Juanjo.
   
  
 

On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose  jj197...@gmail.com 
wrote:
   
  
 
Many thanks Michal,
   
  
 

I will try it and I will try to upgrade my oVirt 3.4.
   
  
 

Thanks again and best regards,
   
  
 

Juanjo.
   
  
 

On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek 
michal.skriva...@redhat.com  wrote:
   
  
 

On Nov 12, 2014, at 16:39 , Juan Jose  jj197...@gmail.com  wrote:
   
  
 

 Hello Michal or everybody,

   
  
 

 Could you tell me where can I get or download ovirt-guest-tool.iso?

   
  
 

Hi,
   
  
 
it's a regular part of the 3.5 release...
   
  
 
http://resources.ovirt.org/ pub/ovirt-3.5/iso/ovirt-guest- tools/
   
  
 
enjoy!:)
   
  
 

Thanks,
   
  
 
michal
   
  
 

 Many thanks in advanced,

   
  
 

 Juanjo.

   
  
 

 On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek 
 michal.skriva...@redhat.com  wrote:

   
  
 

 On Nov 11, 2014, at 11:08 , Juan Jose  jj197...@gmail.com  wrote:

   
  
 

  Thank you very much Michal, If I have checked Device administrator
  in
  my
  Windows 7 VM and as you can see in the attached image, the USB
  device
  is
  correctly installed. But when I click File in remote-viewer USB
  device
  selection appears in grey and I can't select any USB device.
 

   
  
 

  Is there any other requirement to be able redirect USB devices?, Is
  it
  necessary to install usbclerk in Windows clients to redirect USB to
  the
  Windows guest?
 

   
  
 

 usbredir drivers yes, you need them, they should be on the guest
 tools
 iso

   
  
 

 Thanks,

   
  
 
 michal

   
  
 

  Many thanks in advanced,
 

   
  
 

  Juanjo.
 

   
  
 

  On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
  michal.skriva...@redhat.com  wrote:
 

   
  
 

  On Nov 10, 2014, at 17:54 , Juan Jose  jj197...@gmail.com  wrote:
 

   
  
 

   Hello everybody,
  
 

   
  
 

   I have an oVirt 3.4 deployment and I have some Windows 7

Re: [ovirt-users] USB redirect

2014-11-26 Thread Uri Lublin

On 11/23/2014 10:42 AM, Lev Veyde wrote:

Hi Michal,

As far as I know there is no need to install something inside VM for the Native 
USB redirection to function properly, thus nothing related is included on the 
oVirt WGT ISO.


Hi,

Lev, you are correct; there is nothing to install on the guest for Spice 
Native USB.


On the client side there is a need for remote-viewer to be configured 
with USB redir enabled,

and having access to the device (via libusb).
On a Windows client currently we use WinUSB driver to enable access to 
the USB device.
The driver can be installed using the usbclerk service or manually (e.g. 
with Zadig).

It must be installed for each device to be redirected.

On Ovirt, as mentioned, Native Spice USB option has to be enabled.
(This would also add the virtual usb devices needed on the 
qemu-kvm/spice-server side).


Hope that helps,
   Uri.



The user/admin only needs to properly configure the VM for Native USB 
redirection and install the Spice client.

I forwarded the issue to the Spice team, they could properly point to the issue.

Thanks in advance,
Lev Veyde.

- Original Message -
From: Michal Skrivanek michal.skriva...@redhat.com
To: Juan Jose jj197...@gmail.com, Lev Veyde lve...@redhat.com
Cc: users@ovirt.org List users@ovirt.org
Sent: Friday, November 21, 2014 3:07:09 PM
Subject: Re: [ovirt-users] USB redirect


On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote:


Hello Michal and everybody,

I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the 
driver usbredir is not there. Is it normal or maybe it is in another resource?

As the oVirt documentation says, when this driver is installed a new USB 
windows service will be started in the client, but after execute the 
ovirt-guest-tool setup and finish the installation there is not any USB new 
service in my Windows client.

Is it possible that this usbredir driver is not in this ISO?

adding Lev who builds the ISO…can you please check?

Thanks,
michal


Many thanks in advanced,

Juanjo.

On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote:
Many thanks Michal,

I will try it and I will try to upgrade my oVirt 3.4.

Thanks again and best regards,

Juanjo.

On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek michal.skriva...@redhat.com 
wrote:

On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote:


Hello Michal or everybody,

Could you tell me where can I get or download ovirt-guest-tool.iso?

Hi,
it's a regular part of the 3.5 release...
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
enjoy!:)

Thanks,
michal


Many thanks in advanced,

Juanjo.


On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek 
michal.skriva...@redhat.com wrote:

On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote:


Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you 
can see in the attached image, the USB device is correctly installed. But when I click 
File in remote-viewer USB device selection appears in grey and I can't 
select any USB device.

Is there any other requirement to be able redirect USB devices?, Is it 
necessary to install usbclerk in Windows clients to redirect USB to the Windows 
guest?

usbredir drivers yes, you need them, they should be on the guest tools iso

Thanks,
michal


Many thanks in advanced,

Juanjo.

On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com 
wrote:

On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:


Hello everybody,

I have  an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits 
guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer 
as console. Also I have observed something wrong in my administration portal. 
The oVirt documentation says that I have to select Native USB mode in console 
properties in VM configuration

yes, that's the only supported way
you should see the USB controller in devices


but after select this mode, it doesn't remain. If I check this  value in 
console configuration again I can see disabled, native mode value have been 
changed.

there used to be such issue in 3.4..it is fixed in 3.5 already.
It should be a UI problem only…

Thanks,
michal


Is there someone have had this problem?, and how I can solve it?, is it 
necessary to install in Windows clients us clerk software?

Many thanks in advanced.

Juanjo.


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-26 Thread Juan Jose
Thank you very much Uri and everybody,

Best regards,

Juanjo.

On Wed, Nov 26, 2014 at 1:01 PM, Uri Lublin u...@redhat.com wrote:

 On 11/23/2014 10:42 AM, Lev Veyde wrote:

 Hi Michal,

 As far as I know there is no need to install something inside VM for the
 Native USB redirection to function properly, thus nothing related is
 included on the oVirt WGT ISO.


 Hi,

 Lev, you are correct; there is nothing to install on the guest for Spice
 Native USB.

 On the client side there is a need for remote-viewer to be configured with
 USB redir enabled,
 and having access to the device (via libusb).
 On a Windows client currently we use WinUSB driver to enable access to the
 USB device.
 The driver can be installed using the usbclerk service or manually (e.g.
 with Zadig).
 It must be installed for each device to be redirected.

 On Ovirt, as mentioned, Native Spice USB option has to be enabled.
 (This would also add the virtual usb devices needed on the
 qemu-kvm/spice-server side).

 Hope that helps,
Uri.



 The user/admin only needs to properly configure the VM for Native USB
 redirection and install the Spice client.

 I forwarded the issue to the Spice team, they could properly point to the
 issue.

 Thanks in advance,
 Lev Veyde.

 - Original Message -
 From: Michal Skrivanek michal.skriva...@redhat.com
 To: Juan Jose jj197...@gmail.com, Lev Veyde lve...@redhat.com
 Cc: users@ovirt.org List users@ovirt.org
 Sent: Friday, November 21, 2014 3:07:09 PM
 Subject: Re: [ovirt-users] USB redirect


 On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote:

  Hello Michal and everybody,

 I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me
 but the driver usbredir is not there. Is it normal or maybe it is in
 another resource?

 As the oVirt documentation says, when this driver is installed a new USB
 windows service will be started in the client, but after execute the
 ovirt-guest-tool setup and finish the installation there is not any USB new
 service in my Windows client.

 Is it possible that this usbredir driver is not in this ISO?

 adding Lev who builds the ISO…can you please check?

 Thanks,
 michal

  Many thanks in advanced,

 Juanjo.

 On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote:
 Many thanks Michal,

 I will try it and I will try to upgrade my oVirt 3.4.

 Thanks again and best regards,

 Juanjo.

 On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:

 On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote:

  Hello Michal or everybody,

 Could you tell me where can I get or download ovirt-guest-tool.iso?

 Hi,
 it's a regular part of the 3.5 release...
 http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
 enjoy!:)

 Thanks,
 michal

  Many thanks in advanced,

 Juanjo.


 On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:

 On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote:

  Thank you very much Michal, If I have checked Device administrator in
 my Windows 7 VM and as you can see in the attached image, the USB device 
 is
 correctly installed. But when I click File in remote-viewer USB device
 selection appears in grey and I can't select any USB device.

 Is there any other requirement to be able redirect USB devices?, Is it
 necessary to install usbclerk in Windows clients to redirect USB to the
 Windows guest?

 usbredir drivers yes, you need them, they should be on the guest tools
 iso

 Thanks,
 michal

  Many thanks in advanced,

 Juanjo.

 On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:

 On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:

  Hello everybody,

 I have  an oVirt 3.4 deployment and I have some Windows 7 Enterprise
 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using
 remote - viewer as console. Also I have observed something wrong in my
 administration portal. The oVirt documentation says that I have to select
 Native USB mode in console properties in VM configuration

 yes, that's the only supported way
 you should see the USB controller in devices

  but after select this mode, it doesn't remain. If I check this  value
 in console configuration again I can see disabled, native mode value have
 been changed.

 there used to be such issue in 3.4..it is fixed in 3.5 already.
 It should be a UI problem only…

 Thanks,
 michal

  Is there someone have had this problem?, and how I can solve it?, is
 it necessary to install in Windows clients us clerk software?

 Many thanks in advanced.

 Juanjo.


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-24 Thread Juan Jose
Hello Lev and Michal and everybody,

My main question is:

Is it necessary to install in Windows 7 client, no in the guest, the
usbclerk to be able to get USB pen drive into the VM from the Windows 7
client?, in afirmative case, where can I get usbclerk?

Many thanks in advanced,

Juanjo.

On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde lve...@redhat.com wrote:

 Hi Michal,

 As far as I know there is no need to install something inside VM for the
 Native USB redirection to function properly, thus nothing related is
 included on the oVirt WGT ISO.

 The user/admin only needs to properly configure the VM for Native USB
 redirection and install the Spice client.

 I forwarded the issue to the Spice team, they could properly point to the
 issue.

 Thanks in advance,
 Lev Veyde.

 - Original Message -
 From: Michal Skrivanek michal.skriva...@redhat.com
 To: Juan Jose jj197...@gmail.com, Lev Veyde lve...@redhat.com
 Cc: users@ovirt.org List users@ovirt.org
 Sent: Friday, November 21, 2014 3:07:09 PM
 Subject: Re: [ovirt-users] USB redirect


 On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote:

  Hello Michal and everybody,
 
  I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me
 but the driver usbredir is not there. Is it normal or maybe it is in
 another resource?
 
  As the oVirt documentation says, when this driver is installed a new USB
 windows service will be started in the client, but after execute the
 ovirt-guest-tool setup and finish the installation there is not any USB new
 service in my Windows client.
 
  Is it possible that this usbredir driver is not in this ISO?

 adding Lev who builds the ISO…can you please check?

 Thanks,
 michal

 
  Many thanks in advanced,
 
  Juanjo.
 
  On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote:
  Many thanks Michal,
 
  I will try it and I will try to upgrade my oVirt 3.4.
 
  Thanks again and best regards,
 
  Juanjo.
 
  On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
 
  On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote:
 
   Hello Michal or everybody,
  
   Could you tell me where can I get or download ovirt-guest-tool.iso?
 
  Hi,
  it's a regular part of the 3.5 release...
  http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
  enjoy!:)
 
  Thanks,
  michal
 
  
   Many thanks in advanced,
  
   Juanjo.
  
  
   On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
  
   On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote:
  
Thank you very much Michal, If I have checked Device administrator
 in my Windows 7 VM and as you can see in the attached image, the USB device
 is correctly installed. But when I click File in remote-viewer USB
 device selection appears in grey and I can't select any USB device.
   
Is there any other requirement to be able redirect USB devices?, Is
 it necessary to install usbclerk in Windows clients to redirect USB to the
 Windows guest?
  
   usbredir drivers yes, you need them, they should be on the guest tools
 iso
  
   Thanks,
   michal
  
   
Many thanks in advanced,
   
Juanjo.
   
On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
   
On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:
   
 Hello everybody,

 I have  an oVirt 3.4 deployment and I have some Windows 7
 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client.
 I'm using remote - viewer as console. Also I have observed something wrong
 in my administration portal. The oVirt documentation says that I have to
 select Native USB mode in console properties in VM configuration
   
yes, that's the only supported way
you should see the USB controller in devices
   
 but after select this mode, it doesn't remain. If I check this
 value in console configuration again I can see disabled, native mode value
 have been changed.
   
there used to be such issue in 3.4..it is fixed in 3.5 already.
It should be a UI problem only…
   
Thanks,
michal
   

 Is there someone have had this problem?, and how I can solve it?,
 is it necessary to install in Windows clients us clerk software?

 Many thanks in advanced.

 Juanjo.
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
   
   
DeviceAdministrator.png
  
  
 
 
 


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-24 Thread David Jaša
Hi Juan,

Refer to this post, the state of affairs didn't chagne since then:
http://lists.ovirt.org/pipermail/users/2013-May/014429.html

David


On Po, 2014-11-24 at 11:48 +0100, Juan Jose wrote:
 Hello Lev and Michal and everybody,
 
 
 My main question is: 
 
 Is it necessary to install in Windows 7 client, no in the guest, the
 usbclerk to be able to get USB pen drive into the VM from the Windows
 7 client?, in afirmative case, where can I get usbclerk?
 
 
 Many thanks in advanced,
 
 
 Juanjo.
 
 
 On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde lve...@redhat.com wrote:
 Hi Michal,
 
 As far as I know there is no need to install something inside
 VM for the Native USB redirection to function properly, thus
 nothing related is included on the oVirt WGT ISO.
 
 The user/admin only needs to properly configure the VM for
 Native USB redirection and install the Spice client.
 
 I forwarded the issue to the Spice team, they could properly
 point to the issue.
 
 Thanks in advance,
 Lev Veyde.
 
 - Original Message -
 From: Michal Skrivanek michal.skriva...@redhat.com
 To: Juan Jose jj197...@gmail.com, Lev Veyde
 lve...@redhat.com
 Cc: users@ovirt.org List users@ovirt.org
 Sent: Friday, November 21, 2014 3:07:09 PM
 Subject: Re: [ovirt-users] USB redirect
 
 
 On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com
 wrote:
 
  Hello Michal and everybody,
 
  I'm sorry but I have downloaded ovirt-guest-tools from URL
 you gave me but the driver usbredir is not there. Is it normal
 or maybe it is in another resource?
 
  As the oVirt documentation says, when this driver is
 installed a new USB windows service will be started in the
 client, but after execute the ovirt-guest-tool setup and
 finish the installation there is not any USB new service in my
 Windows client.
 
  Is it possible that this usbredir driver is not in this ISO?
 
 adding Lev who builds the ISO…can you please check?
 
 Thanks,
 michal
 
 
  Many thanks in advanced,
 
  Juanjo.
 
  On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose
 jj197...@gmail.com wrote:
  Many thanks Michal,
 
  I will try it and I will try to upgrade my oVirt 3.4.
 
  Thanks again and best regards,
 
  Juanjo.
 
  On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek
 michal.skriva...@redhat.com wrote:
 
  On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com
 wrote:
 
   Hello Michal or everybody,
  
   Could you tell me where can I get or download
 ovirt-guest-tool.iso?
 
  Hi,
  it's a regular part of the 3.5 release...
 
 http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
  enjoy!:)
 
  Thanks,
  michal
 
  
   Many thanks in advanced,
  
   Juanjo.
  
  
   On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
 michal.skriva...@redhat.com wrote:
  
   On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com
 wrote:
  
Thank you very much Michal, If I have checked Device
 administrator in my Windows 7 VM and as you can see in the
 attached image, the USB device is correctly installed. But
 when I click File in remote-viewer USB device selection
 appears in grey and I can't select any USB device.
   
Is there any other requirement to be able redirect USB
 devices?, Is it necessary to install usbclerk in Windows
 clients to redirect USB to the Windows guest?
  
   usbredir drivers yes, you need them, they should be on the
 guest tools iso
  
   Thanks,
   michal
  
   
Many thanks in advanced,
   
Juanjo.
   
On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
 michal.skriva...@redhat.com wrote:
   
On Nov 10, 2014, at 17:54 , Juan Jose
 jj197...@gmail.com wrote:
   
 Hello everybody,

 I have  an oVirt 3.4 deployment and I have some
 Windows 7 Enterprise 32 bits guests. I can't redirect USB from
 a Windows 7 client. I'm using remote - viewer as console. Also
 I have observed something wrong in my administration portal.
 The oVirt documentation says that I have to select Native USB
 mode in console properties in VM

Re: [ovirt-users] USB redirect

2014-11-24 Thread Juan Jose
Thank you very much David,

Now I have clear the issue.

Juanjo.

On Mon, Nov 24, 2014 at 12:19 PM, David Jaša dj...@redhat.com wrote:

 Hi Juan,

 Refer to this post, the state of affairs didn't chagne since then:
 http://lists.ovirt.org/pipermail/users/2013-May/014429.html

 David


 On Po, 2014-11-24 at 11:48 +0100, Juan Jose wrote:
  Hello Lev and Michal and everybody,
 
 
  My main question is:
 
  Is it necessary to install in Windows 7 client, no in the guest, the
  usbclerk to be able to get USB pen drive into the VM from the Windows
  7 client?, in afirmative case, where can I get usbclerk?
 
 
  Many thanks in advanced,
 
 
  Juanjo.
 
 
  On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde lve...@redhat.com wrote:
  Hi Michal,
 
  As far as I know there is no need to install something inside
  VM for the Native USB redirection to function properly, thus
  nothing related is included on the oVirt WGT ISO.
 
  The user/admin only needs to properly configure the VM for
  Native USB redirection and install the Spice client.
 
  I forwarded the issue to the Spice team, they could properly
  point to the issue.
 
  Thanks in advance,
  Lev Veyde.
 
  - Original Message -
  From: Michal Skrivanek michal.skriva...@redhat.com
  To: Juan Jose jj197...@gmail.com, Lev Veyde
  lve...@redhat.com
  Cc: users@ovirt.org List users@ovirt.org
  Sent: Friday, November 21, 2014 3:07:09 PM
  Subject: Re: [ovirt-users] USB redirect
 
 
  On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com
  wrote:
 
   Hello Michal and everybody,
  
   I'm sorry but I have downloaded ovirt-guest-tools from URL
  you gave me but the driver usbredir is not there. Is it normal
  or maybe it is in another resource?
  
   As the oVirt documentation says, when this driver is
  installed a new USB windows service will be started in the
  client, but after execute the ovirt-guest-tool setup and
  finish the installation there is not any USB new service in my
  Windows client.
  
   Is it possible that this usbredir driver is not in this ISO?
 
  adding Lev who builds the ISO…can you please check?
 
  Thanks,
  michal
 
  
   Many thanks in advanced,
  
   Juanjo.
  
   On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose
  jj197...@gmail.com wrote:
   Many thanks Michal,
  
   I will try it and I will try to upgrade my oVirt 3.4.
  
   Thanks again and best regards,
  
   Juanjo.
  
   On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek
  michal.skriva...@redhat.com wrote:
  
   On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com
  wrote:
  
Hello Michal or everybody,
   
Could you tell me where can I get or download
  ovirt-guest-tool.iso?
  
   Hi,
   it's a regular part of the 3.5 release...
  
  http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
   enjoy!:)
  
   Thanks,
   michal
  
   
Many thanks in advanced,
   
Juanjo.
   
   
On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
  michal.skriva...@redhat.com wrote:
   
On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com
  wrote:
   
 Thank you very much Michal, If I have checked Device
  administrator in my Windows 7 VM and as you can see in the
  attached image, the USB device is correctly installed. But
  when I click File in remote-viewer USB device selection
  appears in grey and I can't select any USB device.

 Is there any other requirement to be able redirect USB
  devices?, Is it necessary to install usbclerk in Windows
  clients to redirect USB to the Windows guest?
   
usbredir drivers yes, you need them, they should be on the
  guest tools iso
   
Thanks,
michal
   

 Many thanks in advanced,

 Juanjo.

 On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
  michal.skriva...@redhat.com wrote:

 On Nov 10, 2014, at 17:54 , Juan Jose
  jj197...@gmail.com wrote:

  Hello everybody,
 
  I have  an oVirt 3.4 deployment and I have some
  Windows 7 Enterprise 32 bits guests. I can't redirect USB from
  a Windows 7 client. I'm using remote - viewer as console. Also
  I have

Re: [ovirt-users] USB redirect

2014-11-21 Thread Michal Skrivanek

On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote:

 Hello Michal and everybody,
 
 I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but 
 the driver usbredir is not there. Is it normal or maybe it is in another 
 resource?
 
 As the oVirt documentation says, when this driver is installed a new USB 
 windows service will be started in the client, but after execute the 
 ovirt-guest-tool setup and finish the installation there is not any USB new 
 service in my Windows client.
 
 Is it possible that this usbredir driver is not in this ISO?

adding Lev who builds the ISO…can you please check?

Thanks,
michal

 
 Many thanks in advanced,
 
 Juanjo.
 
 On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote:
 Many thanks Michal,
 
 I will try it and I will try to upgrade my oVirt 3.4.
 
 Thanks again and best regards,
 
 Juanjo.
 
 On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
 
 On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote:
 
  Hello Michal or everybody,
 
  Could you tell me where can I get or download ovirt-guest-tool.iso?
 
 Hi,
 it's a regular part of the 3.5 release...
 http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
 enjoy!:)
 
 Thanks,
 michal
 
 
  Many thanks in advanced,
 
  Juanjo.
 
 
  On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek 
  michal.skriva...@redhat.com wrote:
 
  On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote:
 
   Thank you very much Michal, If I have checked Device administrator in my 
   Windows 7 VM and as you can see in the attached image, the USB device is 
   correctly installed. But when I click File in remote-viewer USB device 
   selection appears in grey and I can't select any USB device.
  
   Is there any other requirement to be able redirect USB devices?, Is it 
   necessary to install usbclerk in Windows clients to redirect USB to the 
   Windows guest?
 
  usbredir drivers yes, you need them, they should be on the guest tools iso
 
  Thanks,
  michal
 
  
   Many thanks in advanced,
  
   Juanjo.
  
   On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
   michal.skriva...@redhat.com wrote:
  
   On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:
  
Hello everybody,
   
I have  an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 
bits guests. I can't redirect USB from a Windows 7 client. I'm using 
remote - viewer as console. Also I have observed something wrong in my 
administration portal. The oVirt documentation says that I have to 
select Native USB mode in console properties in VM configuration
  
   yes, that's the only supported way
   you should see the USB controller in devices
  
but after select this mode, it doesn't remain. If I check this  value 
in console configuration again I can see disabled, native mode value 
have been changed.
  
   there used to be such issue in 3.4..it is fixed in 3.5 already.
   It should be a UI problem only…
  
   Thanks,
   michal
  
   
Is there someone have had this problem?, and how I can solve it?, is it 
necessary to install in Windows clients us clerk software?
   
Many thanks in advanced.
   
Juanjo.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
  
  
   DeviceAdministrator.png
 
 
 
 
 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-13 Thread Juan Jose
Hello Michal and everybody,

I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but
the driver usbredir is not there. Is it normal or maybe it is in another
resource?

As the oVirt documentation says, when this driver is installed a new USB
windows service will be started in the client, but after execute the
ovirt-guest-tool setup and finish the installation there is not any USB new
service in my Windows client.

Is it possible that this usbredir driver is not in this ISO?

Many thanks in advanced,

Juanjo.

On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote:

 Many thanks Michal,

 I will try it and I will try to upgrade my oVirt 3.4.

 Thanks again and best regards,

 Juanjo.

 On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:


 On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote:

  Hello Michal or everybody,
 
  Could you tell me where can I get or download ovirt-guest-tool.iso?

 Hi,
 it's a regular part of the 3.5 release...
 http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
 enjoy!:)

 Thanks,
 michal

 
  Many thanks in advanced,
 
  Juanjo.
 
 
  On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
 
  On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote:
 
   Thank you very much Michal, If I have checked Device administrator in
 my Windows 7 VM and as you can see in the attached image, the USB device is
 correctly installed. But when I click File in remote-viewer USB device
 selection appears in grey and I can't select any USB device.
  
   Is there any other requirement to be able redirect USB devices?, Is
 it necessary to install usbclerk in Windows clients to redirect USB to the
 Windows guest?
 
  usbredir drivers yes, you need them, they should be on the guest tools
 iso
 
  Thanks,
  michal
 
  
   Many thanks in advanced,
  
   Juanjo.
  
   On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
  
   On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:
  
Hello everybody,
   
I have  an oVirt 3.4 deployment and I have some Windows 7
 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client.
 I'm using remote - viewer as console. Also I have observed something wrong
 in my administration portal. The oVirt documentation says that I have to
 select Native USB mode in console properties in VM configuration
  
   yes, that's the only supported way
   you should see the USB controller in devices
  
but after select this mode, it doesn't remain. If I check this
 value in console configuration again I can see disabled, native mode value
 have been changed.
  
   there used to be such issue in 3.4..it is fixed in 3.5 already.
   It should be a UI problem only…
  
   Thanks,
   michal
  
   
Is there someone have had this problem?, and how I can solve it?,
 is it necessary to install in Windows clients us clerk software?
   
Many thanks in advanced.
   
Juanjo.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
  
  
   DeviceAdministrator.png
 
 



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-12 Thread Juan Jose
Hello Michal or everybody,

Could you tell me where can I get or download ovirt-guest-tool.iso?

Many thanks in advanced,

Juanjo.


On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek 
michal.skriva...@redhat.com wrote:


 On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote:

  Thank you very much Michal, If I have checked Device administrator in my
 Windows 7 VM and as you can see in the attached image, the USB device is
 correctly installed. But when I click File in remote-viewer USB device
 selection appears in grey and I can't select any USB device.
 
  Is there any other requirement to be able redirect USB devices?, Is it
 necessary to install usbclerk in Windows clients to redirect USB to the
 Windows guest?

 usbredir drivers yes, you need them, they should be on the guest tools iso

 Thanks,
 michal

 
  Many thanks in advanced,
 
  Juanjo.
 
  On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
 
  On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:
 
   Hello everybody,
  
   I have  an oVirt 3.4 deployment and I have some Windows 7 Enterprise
 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using
 remote - viewer as console. Also I have observed something wrong in my
 administration portal. The oVirt documentation says that I have to select
 Native USB mode in console properties in VM configuration
 
  yes, that's the only supported way
  you should see the USB controller in devices
 
   but after select this mode, it doesn't remain. If I check this  value
 in console configuration again I can see disabled, native mode value have
 been changed.
 
  there used to be such issue in 3.4..it is fixed in 3.5 already.
  It should be a UI problem only…
 
  Thanks,
  michal
 
  
   Is there someone have had this problem?, and how I can solve it?, is
 it necessary to install in Windows clients us clerk software?
  
   Many thanks in advanced.
  
   Juanjo.
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
 
 
  DeviceAdministrator.png


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-12 Thread Michal Skrivanek

On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote:

 Hello Michal or everybody,
 
 Could you tell me where can I get or download ovirt-guest-tool.iso?

Hi,
it's a regular part of the 3.5 release...
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
enjoy!:)

Thanks,
michal

 
 Many thanks in advanced,
 
 Juanjo.
 
 
 On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
 
 On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote:
 
  Thank you very much Michal, If I have checked Device administrator in my 
  Windows 7 VM and as you can see in the attached image, the USB device is 
  correctly installed. But when I click File in remote-viewer USB device 
  selection appears in grey and I can't select any USB device.
 
  Is there any other requirement to be able redirect USB devices?, Is it 
  necessary to install usbclerk in Windows clients to redirect USB to the 
  Windows guest?
 
 usbredir drivers yes, you need them, they should be on the guest tools iso
 
 Thanks,
 michal
 
 
  Many thanks in advanced,
 
  Juanjo.
 
  On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
  michal.skriva...@redhat.com wrote:
 
  On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:
 
   Hello everybody,
  
   I have  an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 
   bits guests. I can't redirect USB from a Windows 7 client. I'm using 
   remote - viewer as console. Also I have observed something wrong in my 
   administration portal. The oVirt documentation says that I have to select 
   Native USB mode in console properties in VM configuration
 
  yes, that's the only supported way
  you should see the USB controller in devices
 
   but after select this mode, it doesn't remain. If I check this  value in 
   console configuration again I can see disabled, native mode value have 
   been changed.
 
  there used to be such issue in 3.4..it is fixed in 3.5 already.
  It should be a UI problem only…
 
  Thanks,
  michal
 
  
   Is there someone have had this problem?, and how I can solve it?, is it 
   necessary to install in Windows clients us clerk software?
  
   Many thanks in advanced.
  
   Juanjo.
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
 
 
  DeviceAdministrator.png
 
 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-11 Thread Juan Jose
Thank you very much Michal, If I have checked Device administrator in my
Windows 7 VM and as you can see in the attached image, the USB device is
correctly installed. But when I click File in remote-viewer USB device
selection appears in grey and I can't select any USB device.

Is there any other requirement to be able redirect USB devices?, Is it
necessary to install usbclerk in Windows clients to redirect USB to the
Windows guest?

Many thanks in advanced,

Juanjo.

On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
michal.skriva...@redhat.com wrote:


 On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:

  Hello everybody,
 
  I have  an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32
 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote
 - viewer as console. Also I have observed something wrong in my
 administration portal. The oVirt documentation says that I have to select
 Native USB mode in console properties in VM configuration

 yes, that's the only supported way
 you should see the USB controller in devices

  but after select this mode, it doesn't remain. If I check this  value in
 console configuration again I can see disabled, native mode value have been
 changed.

 there used to be such issue in 3.4..it is fixed in 3.5 already.
 It should be a UI problem only…

 Thanks,
 michal

 
  Is there someone have had this problem?, and how I can solve it?, is it
 necessary to install in Windows clients us clerk software?
 
  Many thanks in advanced.
 
  Juanjo.
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-11 Thread Michal Skrivanek

On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote:

 Thank you very much Michal, If I have checked Device administrator in my 
 Windows 7 VM and as you can see in the attached image, the USB device is 
 correctly installed. But when I click File in remote-viewer USB device 
 selection appears in grey and I can't select any USB device.
 
 Is there any other requirement to be able redirect USB devices?, Is it 
 necessary to install usbclerk in Windows clients to redirect USB to the 
 Windows guest?

usbredir drivers yes, you need them, they should be on the guest tools iso

Thanks,
michal

 
 Many thanks in advanced,
 
 Juanjo.
 
 On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek 
 michal.skriva...@redhat.com wrote:
 
 On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:
 
  Hello everybody,
 
  I have  an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 
  bits guests. I can't redirect USB from a Windows 7 client. I'm using remote 
  - viewer as console. Also I have observed something wrong in my 
  administration portal. The oVirt documentation says that I have to select 
  Native USB mode in console properties in VM configuration
 
 yes, that's the only supported way
 you should see the USB controller in devices
 
  but after select this mode, it doesn't remain. If I check this  value in 
  console configuration again I can see disabled, native mode value have been 
  changed.
 
 there used to be such issue in 3.4..it is fixed in 3.5 already.
 It should be a UI problem only…
 
 Thanks,
 michal
 
 
  Is there someone have had this problem?, and how I can solve it?, is it 
  necessary to install in Windows clients us clerk software?
 
  Many thanks in advanced.
 
  Juanjo.
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
 
 
 DeviceAdministrator.png

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirect

2014-11-10 Thread Michal Skrivanek

On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote:

 Hello everybody,
 
 I have  an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits 
 guests. I can't redirect USB from a Windows 7 client. I'm using remote - 
 viewer as console. Also I have observed something wrong in my administration 
 portal. The oVirt documentation says that I have to select Native USB mode in 
 console properties in VM configuration

yes, that's the only supported way
you should see the USB controller in devices

 but after select this mode, it doesn't remain. If I check this  value in 
 console configuration again I can see disabled, native mode value have been 
 changed.

there used to be such issue in 3.4..it is fixed in 3.5 already.
It should be a UI problem only…

Thanks,
michal

 
 Is there someone have had this problem?, and how I can solve it?, is it 
 necessary to install in Windows clients us clerk software?
 
 Many thanks in advanced.
 
 Juanjo.
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB support always disable

2014-10-21 Thread Amador Pahim

On 10/21/2014 10:24 PM, PaulCheung wrote:


Dears,
Every time I set it to Native, but after I click comfirm, and start 
the VM, it still show Disable. Is it a bug? Actually the USB is enable.


The issue is the VM Edit window not loading current value 
(https://bugzilla.redhat.com/show_bug.cgi?id=1104318), but you can check 
the current value in VM General sub-tab.

Could you share the exact ovirt-engine version you're using?







Sincerely yours,
PaulCheung


 tel: 180-8882-7173


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Device selection

2014-07-16 Thread David Jaša
On Po, 2014-07-14 at 12:54 -0400, Maurice James wrote:
 Has anyone gotten the USB Device selection on the spice-viewer window
 to work?
 

Hi Maurice,

I suppose you use Windows client, is it the case? If so, yo either have
to install WinUSB driver for each device manually, or you need to build
usbclerk service, or you need some other tool such as zadig. See this
archived post for reference:
http://lists.freedesktop.org/archives/spice-devel/2013-May/013479.html

If you use Linux client, it's either misconfiguration on your part or by
your distribution, or it is a bug.

Sharing basic info always helps others help you!

Regards,

David

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Device selection

2014-07-16 Thread Maurice James
Does the driver get installed on the host or the vm?



- Original Message -
From: David Jaša dj...@redhat.com
To: Maurice James mja...@media-node.com
Cc: users users@ovirt.org
Sent: Wednesday, July 16, 2014 6:39:25 AM
Subject: Re: [ovirt-users] USB Device selection

On Po, 2014-07-14 at 12:54 -0400, Maurice James wrote:
 Has anyone gotten the USB Device selection on the spice-viewer window
 to work?
 

Hi Maurice,

I suppose you use Windows client, is it the case? If so, yo either have
to install WinUSB driver for each device manually, or you need to build
usbclerk service, or you need some other tool such as zadig. See this
archived post for reference:
http://lists.freedesktop.org/archives/spice-devel/2013-May/013479.html

If you use Linux client, it's either misconfiguration on your part or by
your distribution, or it is a bug.

Sharing basic info always helps others help you!

Regards,

David

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB Device selection

2014-07-16 Thread David Jaša
On St, 2014-07-16 at 08:50 -0400, Maurice James wrote:
 Does the driver get installed on the host or the vm?

Neither, this applies to the client. The host just creates virtual USB
hub and plugs redirected USB devices into it and guest sees the
devices just as if they'd be plugged physically.

Client system OTOH needs to handle the device in an unusual way so that
spice/usbredir gets raw control over it - that's the reason why you need
the WinUSB driver to be used for the device prior to actual redirection.

On linux clients, a short-lived binary does similar magic with udev.

HTH,

David

 
 
 
 - Original Message -
 From: David Jaša dj...@redhat.com
 To: Maurice James mja...@media-node.com
 Cc: users users@ovirt.org
 Sent: Wednesday, July 16, 2014 6:39:25 AM
 Subject: Re: [ovirt-users] USB Device selection
 
 On Po, 2014-07-14 at 12:54 -0400, Maurice James wrote:
  Has anyone gotten the USB Device selection on the spice-viewer window
  to work?
  
 
 Hi Maurice,
 
 I suppose you use Windows client, is it the case? If so, yo either have
 to install WinUSB driver for each device manually, or you need to build
 usbclerk service, or you need some other tool such as zadig. See this
 archived post for reference:
 http://lists.freedesktop.org/archives/spice-devel/2013-May/013479.html
 
 If you use Linux client, it's either misconfiguration on your part or by
 your distribution, or it is a bug.
 
 Sharing basic info always helps others help you!
 
 Regards,
 
 David
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB support?

2014-07-03 Thread Demeter Tibor

Hi,

I have installed to vdsm-hook-hostusb with yum, but I cannot find the option in 
custom properties in ovirt.

Is this plugin does automatically enabled? 
How can I enabled it?


Thanks in advance!

Tibor



- Eredeti üzenet -
 You can use hostusb vdsm hook:
 http://wiki.ovirt.org/VDSM-Hooks/hostusb
 
 26.06.2014 21:37, Demeter Tibor пишет:
  Hi,
 
  Is there any possibility for using the host's usb ports for a guest?
  I need to migrate a physical windows based machine that using usb tokens.
 
  Thanks in advance.
  Tibor
 
 
 
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB support?

2014-07-03 Thread Michal Skrivanek

On Jul 3, 2014, at 15:45 , Demeter Tibor tdeme...@itsmart.hu wrote:

 
 Hi,
 
 I have installed to vdsm-hook-hostusb with yum, but I cannot find the option 
 in custom properties in ovirt.
 
 Is this plugin does automatically enabled? 
 How can I enabled it?

there's a description in README and/or some generic readme about working with 
custom properties
It needs to be added via engine-config manually (hook is in vdsm whereas custom 
properties are in the engine)

Thanks,
michal

 
 
 Thanks in advance!
 
 Tibor
 
 
 
 - Eredeti üzenet -
 You can use hostusb vdsm hook:
 http://wiki.ovirt.org/VDSM-Hooks/hostusb
 
 26.06.2014 21:37, Demeter Tibor пишет:
 Hi,
 
 Is there any possibility for using the host's usb ports for a guest?
 I need to migrate a physical windows based machine that using usb tokens.
 
 Thanks in advance.
 Tibor
 
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB support?

2014-06-27 Thread Alexandr Krivulya
You can use hostusb vdsm hook:
http://wiki.ovirt.org/VDSM-Hooks/hostusb

26.06.2014 21:37, Demeter Tibor пишет:
 Hi,

 Is there any possibility for using the host's usb ports for a guest?
 I need to migrate a physical windows based machine that using usb tokens.

 Thanks in advance.
 Tibor



 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] USB redirection

2014-06-02 Thread Itamar Heim

On 06/02/2014 03:57 PM, Jean-Pierre WEISS wrote:

Hi,

I'm trying to redirect USB devices on a Windows 7 vm. But, after
searching the web, I didn't find any procedure to do this.

Here is my configuration :

Host : CentOS 6.5 with ovirt 3.4.0.1-el6

vm : Windows 7 with the virtio drivers (virtio-win- 0.1.74) installed,
spice-guest-tools-0.74, and ovirt-guest-agent installed.

All is working fine, except that I can see the USB devices connected to
the client.

Any clue ?

Thanks,

Jean-Pierre WEISS
Administrateur Systèmes et Réseaux
Mairie de Saint-Ouen


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



adding spice-devel list
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] usb and serial port redirection

2014-05-15 Thread Michal Skrivanek

On 12 May 2014, at 00:03, Itamar Heim wrote:

 On 05/07/2014 03:14 AM, Demeter Tibor wrote:
 Hi,
 
 Can I redirect the vm host's usb and serial ports to the guests?
 It is very important me, because we need to virtualize a physical host
 that use hardware tokens (usb hw key).
 I didn't find any option for this.
 
 http://www.ovirt.org/VDSM-Hooks/hostusb

btw, the host devices passthrough is on our list for 3.6 as well…that would 
eliminate the need for a hook

 
 
 Thanks in advance
 
 Best regards,
 
 Tibor
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] usb and serial port redirection

2014-05-11 Thread Itamar Heim

On 05/07/2014 03:14 AM, Demeter Tibor wrote:

Hi,

Can I redirect the vm host's usb and serial ports to the guests?
It is very important me, because we need to virtualize a physical host
that use hardware tokens (usb hw key).
I didn't find any option for this.


http://www.ovirt.org/VDSM-Hooks/hostusb



Thanks in advance

Best regards,

Tibor


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users