I think (having gone through this before) that the real badness happens if
you put -15 dBm in the front end *and* turn all the gain up to the maximum.
Then some chip in the chain goes over its limit.
Really though, with a real world system, over the air, I'd be shocked if
you could blow up the
Hello,
I have several x310s equipped with TwinRxs, and I'm having an issue with
consecutive receives using STREAM_MODE_NUM_SAMPS_AND_DONE.
To illustrate my issue, I will refer to the uhd examples provided on github. I
have built the original "rx_samples_to_file" example and can run it with no
Dear Usman,
pretty much anywhere. There's nothing special about these cables, and
they are specified in the datasheet on the N2xx GPSDO product page on
our website. The serial cable is straight, and the power cable reduces a
typical 2.54mm-pitched 3 pin (only outer 2 used) to simple 2 pin.
Best
Hi, I am trying to understand the input-port limit of the B2X0 series,
which is specified as -15dBm in the User's Manual (
http://files.ettus.com/manual/page_usrp_b200.html).
The issue is that if I use external front-end components (masthead LNA and
a saw filter), it is difficult to limit power
Hi,
>From where I can buy replacement cables, antenna, pps and clock, for N210
GPSDO?
--
Usman
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
