Hi
I recently got two UBX160 daughter boards to work in the ISM band of 5.8
GHz. I am not able to detect these daughter boards at all. I am using
uhd_version 3.10
I can correctly detect all my other types of daughter boards (CBX, SBX ,
WBX). I read through some of the mailing lists and came
Hello,
We are using our E312 with RFNoC (UHD_4.0.0.rfnoc-devel-931-g0077f0d3) as a
stepped frequency LFM radar with a master clock rate of 50MHz and would like to
use the second RX channel to obtain a calibration pulse through external
loopback each time we tune to a new frequency. So far we
Hi all.
So I'm thinking of starting a project with the E310 that requires high accuracy
control of a switch.
Basically I need to receive a single RF sample (@1MHz) (1us), then send a
signal via the GPIO on a second sample (2us), and then receive a signal again
on the third sample (3us) and
Hello all,
The release candidate of UHD version 3.9.7 has been tagged and is available
for testing. This is an update to the Long Term Support series and is
planned to be released next Monday, the 17th.
The tag for this release candidate:
No, it doesn't show dBm. It shows "dB", relative to an arbitrary chosen
digital full-scale value.
Best regards,
Marcus
On 07/11/2017 01:26 AM, Muhammad, Siraj wrote:
>
> Thank you very much, Marcus!
>
> But your fosphor RFNoC block does show data in dBm. Can you please
> explain how is that
Hi,all,
Are there about detailed instruction about rfnoc_fosphor?
thank you.
best regards
John
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
