Hello,
I used the "rx_to_file " executable file test to receive samples from USR N310
and the file with rx camples as the following format:
8600 c038 5900 00b8
8600 c038 5900 00b8 5900 8038 8600 c0b8
5900 8038 5900 8038
5900 8038 5900 0038 5900 8038
Hello All,
After finished the full installation of UHD in the Host and the USRP N310 i
used the gnu-radio blocks UHD:source /sink to produce full-duplex in the 4
TX/RX however the message "L"(that means late command on TX). To solve this
problem I installed the RFnoC blocks and develop some
Hello,
Looking into schematic of N310 motherboard , I notice it accepts 10MHz ,20MHz
and 25MHz external clock. I need to synchronize the USRP N310 with external
PLL. Can i use 100 MHz clock as reference?
Thanks in advanced
Diogo Marinho
___
Hi,
I need to develop one application that grantee the same phase in 4 TX channels
on USRP N310. What API is recommended for this equipment? GNURadio, labview,
Matlab?
Thanks in advanced
Diogo Marinho
___
USRP-users mailing list
I am using N310 and i would like to send my questions to the forum.
So far i am not able to do it.
Thanks
Diogo Marinho
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Hello,
I am using USRP N310 , how can i use the external clock LO IN 0/1 and 2/3 in
GNURadio?
Also i would like to know witch API is better to develop aplication in this
device, GNURadio, or Matlab?
Best regards
Diogo
___
USRP-users mailing list