Leong, Kirsten - 0551 - MITLL via USRP-users" >
> *Reply-To: *"Leong, Kirsten - 0551 - MITLL"
> *Date: *Friday, August 2, 2019 at 12:25 PM
> *To: *Lars Kuger , "usrp-users@lists.ettus.com"
>
> *Subject: *Re: [USRP-users] Error 'Timeout on Chan 0'
>
>
>
Leong, Kirsten - 0551 - MITLL via USRP-users"
*Reply-To: *"Leong, Kirsten - 0551 - MITLL"
*Date: *Friday, August 2, 2019 at 12:25 PM
*To: *Lars Kuger ,
"usrp-users@lists.ettus.com"
*Subject: *Re: [USRP-users] Error 'Timeout on Chan 0'
I tried refor
- MITLL"
Date: Friday, August 2, 2019 at 12:25 PM
To: Lars Kuger , "usrp-users@lists.ettus.com"
Subject: Re: [USRP-users] Error 'Timeout on Chan 0'
I tried reformatting the xml file based off the uhd_rfnoc_adder.xml file;
however, I still get the same error. I’m not trying t
My block is expecting to take in a
> complex 32bit floats and output a 32 bit float.
>
>
>
> *From: *USRP-users on behalf of Lars
> Kuger via USRP-users
> *Reply-To: *Lars Kuger
> *Date: *Friday, August 2, 2019 at 10:14 AM
> *To: *"usrp-users@lists.ettus.com"
> *Su
of Lars Kuger
via USRP-users
Reply-To: Lars Kuger
Date: Friday, August 2, 2019 at 10:14 AM
To: "usrp-users@lists.ettus.com"
Subject: Re: [USRP-users] Error 'Timeout on Chan 0'
Hello Kirsten,
I remember getting the same error message while developing a custom RFNoC
block. I found t
they commented out the line
in UHD since they were doing something similar and didn't want to see it.
From: USRP-users on behalf of Lars Kuger
via USRP-users
Sent: Friday, August 2, 2019 10:13 AM
To: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Error
Hello Kirsten,
I remember getting the same error message while developing a custom
RFNoC block. I found the problem to be caused by the corresponding xml
file which is located in the grc folder. I am not sure what part of the
file exactly caused the error message (maybe the ordering of the
Hello,
I am using a USRP X310 and am using gnuradio companion to test a custom block.
The current diagram flows as follows: File Source->RFNoC FIFO->custom
block->complex to image->frequency sink. However, when I try to execute, I get
the error ‘timeout on chan 0’. My testbench passes all 5
