400 Msps would be 1.6 GB/s for sc16 samples. I think X310 bus_clk is 166.66
MHz for a peak throughput of 166.66 MHz * 8 bytes/cycle = 1.333 GB/s, so it
would require two separate replay blocks (separate buses, not just separate
channels).
I don't know if the memory bandwidth would be adequate
On Wed, Dec 5, 2018 at 4:13 PM Max Thomas via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hi,
>
> When attempting to stream different waveforms using both channels of the
> replay block simultaneously to two radios on the same USRP (X310) there are
> under-runs. Any ideas why this is
Hi,
When attempting to stream different waveforms using both channels of the
replay block simultaneously to two radios on the same USRP (X310) there are
under-runs. Any ideas why this is happening? The replay block works as
expected when using either channel 0 or channel 1, but fails when
