lttechnologies.com>
> *Cc: *"usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com>
> *Subject: *Re: [USRP-users] Trying to verify Rx MIMO operation of x310
>
>
>
> Hi Mark,
>
> Unfortunately you're up against the limits of the included examples. There
gt;
>>
>> Mark
>>
>>
>>
>> *From: *Derek Kozel <derek.ko...@ettus.com>
>> *Date: *Tuesday, August 1, 2017 at 10:08 AM
>> *To: *Mark Koenig <mark.koe...@iubelttechnologies.com>
>> *Cc: *"usrp-users@lists.ettus.com" <usrp-
>
>
>
> Mark
>
>
>
> *From: *Derek Kozel <derek.ko...@ettus.com>
> *Date: *Tuesday, August 1, 2017 at 10:08 AM
> *To: *Mark Koenig <mark.koe...@iubelttechnologies.com>
> *Cc: *"usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com>
August 1, 2017 at 10:08 AM
To: Mark Koenig <mark.koe...@iubelttechnologies.com>
Cc: "usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com>
Subject: Re: [USRP-users] Trying to verify Rx MIMO operation of x310
Hello Mark,
rx_samples_to_file will only receive a single channel.
Hello Mark,
rx_samples_to_file will only receive a single channel. It is a minimal
example.
Try:
rx_multi_samples --channels 0,1
This will receive two channels, a pair of UBXs only has one RX channel per
daughterboard so UHD can infer the sub device specification. The default
sample rate is 100
I currently have an x310 with a ubx-40 in each of slots A and B. I have one
10Gig Ethernet connection hooked up, and would like to receive on both channels
A and B.
I tried using the “rx_multi_samples” function, but I didn’t get a good feeling
I was collecting on both channels. I tried using