On 08/14/2018 02:14 PM, Marcus D. Leech via USRP-users wrote:
On 08/10/2018 02:58 PM, Johannes Demel via USRP-users wrote:
Hi Marcus,
with UHD 3.10 we could run GR flowgraphs for hours. It recognizes the
daughterboardand everything.
I hope R&D can help.
Cheers
Johannes
I was able to reproduc
on't have an RFX2400 to test with). Falling-back to 3.10.3 fixes it.
Von: USRP-users im Auftrag von Marcus D. Leech
via USRP-users
Gesendet: Freitag, 10. August 2018 18:28
An: usrp-users@lists.ettus.com
Betreff: Re: [USRP-users] USRP2r4 \w RFX2400 f
8:28
An: usrp-users@lists.ettus.com
Betreff: Re: [USRP-users] USRP2r4 \w RFX2400 fails with UHD3.14
On 08/10/2018 04:24 AM, Johannes Demel via USRP-users wrote:
> Hi Marcus,
>
> I put my answer on top. I hope that doesn't lead to confusion.
>
> Regarding (A): I hope it should work
On 08/10/2018 04:24 AM, Johannes Demel via USRP-users wrote:
Hi Marcus,
I put my answer on top. I hope that doesn't lead to confusion.
Regarding (A): I hope it should work. How would I proceed to debug it?
Does the same "unknown daughter-board" error show up with an earlier UHD
(like the UHD 3
Hi Marcus,
I put my answer on top. I hope that doesn't lead to confusion.
Regarding (A): I hope it should work. How would I proceed to debug it?
Regarding (B): We have a laptop with a 1G NIC, a 1G switch and a USRP2
on the other end.
This setup works with UHD3.10 (see my initial email on the t
On 08/09/2018 06:03 AM, Johannes Demel via USRP-users wrote:
Hi!
Thanks for your reply. We didn't update because there was no Warning
that suggested to do so. Anyways, now we updated the FPGA and Firmware.
As a summary we had 'FW Version: 12.3' and 'FPGA Version: 10.0'.
Now it is 'FW Version:
am wrote:
Have you updated the firmware on the radio(s) after updating UHD?
Will
-Original Message-
From: USRP-users On Behalf Of Johannes
Demel via USRP-users
Sent: Friday, August 3, 2018 10:02 AM
To: usrp-users@lists.ettus.com
Subject: [USRP-users] USRP2r4 \w RFX2400 fails with UHD3.14
Hi a
Hi all,
we just got new X310s and wanted to use them with the latest UHD
version. They work. That's great. But we have some old USRP2s as well.
And we want to use them with the same driver version.
We ran 'uhd_usrp_probe' for all of them. The output is below.
Essentially, there seems to be a
