Hi Scott,
Thanks for the pointers! I actually tried making these changes this
afternoon... This is what I came up with for the LMK table (it appears the
sysref_divider wants to be 500 for this rate based on the other
calculations):
```
clkout_divider = {120e6: 25, 122.88e6: 25, 125e6: 24,
I tried nuking everything and doing a clean install of the master branch, but
still get the same errors. Here’s a couple of warnings I did not copy in my
first e-mail that occur when running the uhd_image_loader with the new fpga
.bit:
[WARNING] [MPMD IMAGE LOADER] RuntimeError: Component
On 10/18/2018 04:42 PM, Farhad Mirkazemi wrote:
I did it with 192.168.10.3 for ethernet and 192.168.10.3 & also
192.168.10.4 for USRP2 but that doesn't help either!?
How are they connected to your host?
What happens if you:
uhd_usrp_probe --args "addr=192.168.10.3"
or
uhd_usrp_probe
I did it with 192.168.10.3 for ethernet and 192.168.10.3 & also 192.168.10.4
for USRP2 but that doesn't help either!?
On Thursday, October 18, 2018, 4:21:58 PM EDT, Marcus D. Leech
wrote:
On 10/18/2018 04:14 PM, Farhad Mirkazemi wrote:
Hi Marcus,
Thanks for your reply;
On 10/18/2018 04:14 PM, Farhad Mirkazemi wrote:
Hi Marcus,
Thanks for your reply;
I have only one ethernet interface on my PC but I connect my usrp's on
and off, first one works pretty ok for a long time now but the problem
occurs when I try to connect the second usrp when the first one is
Hi Marcus,
Thanks for your reply;
I have only one ethernet interface on my PC but I connect my usrp's on and off,
first one works pretty ok for a long time now but the problem occurs when I try
to connect the second usrp when the first one is not (can not be) connected (I
don't have ethernet
On 10/18/2018 09:44 AM, Mercado, Alejandra via USRP-users wrote:
Thanks for your response and please, forgive the delay in responding.
I recorded the different sampling rates and the warnings that
sometimes appeared for some sampling rates.
For example, when I set samp_rate=960kHz, it gave
On 10/18/2018 02:51 PM, Farhad Mirkazemi via USRP-users wrote:
Hi,
I have set up my first usrp2 on Ubuntu with its default ip address
(192.168.10.2), with the ethernet ip address 192.168.10.1 and subnet
mask 255.255.255.0 and working with UHD fine; for some reasons, I need
to use a second
EJ,
We are continuing to investigate the rate selection and possibility of
adding 120 MHz as an MCR option. Our initial choices were (in large part)
driven by the available options and example code provided through their
evaluation software. It appears there is leeway in choosing MCRs, although
Apple's latest OSX, macOS Mojave 10.14, was officially released on September
24, 2018 -- just under a month ago. I've been running the public beta for a few
months on a separate partition to make sure GR / UHD / Volk work on this new
release ... and, the good news is that that they do!
There
Hi Dan,
I'll see if I can reproduce this with the current master. In the meantime I
suggest just double checking that the fpga-src submodule is also up to
date. Currently, uhd master is at 7130059 and fpga should be at 340bb07. I
know that error would occur with older versions of the FPGA code.
I am trying to to work with the RFNoc replay block on an N310. I have followed
the instructions here: https://kb.ettus.com/Using_the_RFNoC_Replay_Block
I have Ubuntu 18.04, and the current master branch of UHD.
Those instructions are for the X3xx, but I tried modifying them for the N310,
by
Thanks for your response and please, forgive the delay in responding.
I recorded the different sampling rates and the warnings that sometimes
appeared for some sampling rates.
For example, when I set samp_rate=960kHz, it gave this message:
** UHD Warning:
The requested decimation is odd; the
13 matches
Mail list logo
