Re: [USRP-users] USRP B210 ERROR
What does ‘lsusb’ show with the device plugged in? Sent from my iPhone > On Oct 15, 2019, at 3:50 PM, Sam Reiter via USRP-users > wrote: > > Khizar, > > Is this still an issue for you? There's an important step in the UHD install > process to allow USB devices to be used by non-root users: > > https://files.ettus.com/manual/page_transport.html#transport_usb_udev > > Let me know if this does the trick. > > Sam > >> On Tue, Sep 24, 2019 at 1:10 AM Khizar Abbas via USRP-users >> wrote: >> I have tried this /usr/local/lib/uhd/utils/uhd_images_downloader.py >> download the image and install it. but the error is still same no device >> found. Even i have tried to download the drivers again. still same error. >> Please suggest some solution. Below is log in the response of the command . >> check the error in Bold text below. >> Thanks >> ncl@rasputin:~/openairinterface5g/cmake_targets/lte_build_oai/build$ sudo -E >> ./lte-uesoftmodem -C 262500 -r 25 --ue-rxgain 125 --ue-txgain 90 >> --ue-scan-carrier -d >> [CONFIG] get parameters from cmdline , debug flags: 0x0040 >> # /dev/cpu_dma_latency set to 0us >> [CONFIG] log_config: 2/3 parameters successfully set >> [CONFIG] log_config: 42/42 parameters successfully set >> [CONFIG] log_config: 42/42 parameters successfully set >> [CONFIG] log_config: 15/15 parameters successfully set >> [CONFIG] log_config: 15/15 parameters successfully set >> log init done >> Reading in command-line options >> [CONFIG] (root): 19/22 parameters successfully set >> [CONFIG] (root): 4/5 parameters successfully set >> [ENB_APP] nfapi running mode: MONOLITHIC >> Running with 1 UE instances >> [CONFIG] TTracer: 4/4 parameters successfully set >> CPU Freq is 3.000175 >> ITTI init >> [TMR] Starting itti queue: TASK_UNKNOWN as task 0 >> [TMR] Starting itti queue: TASK_TIMER as task 1 >> [TMR] Starting itti queue: TASK_L2L1 as task 2 >> [TMR] Starting itti queue: TASK_BM as task 3 >> [TMR] Starting itti queue: TASK_PHY_ENB as task 4 >> [TMR] Starting itti queue: TASK_MAC_ENB as task 5 >> [TMR] Starting itti queue: TASK_RLC_ENB as task 6 >> [TMR] Starting itti queue: TASK_RRC_ENB_NB_IoT as task 7 >> [TMR] Starting itti queue: TASK_PDCP_ENB as task 8 >> [TMR] Starting itti queue: TASK_DATA_FORWARDING as task 9 >> [TMR] Starting itti queue: TASK_END_MARKER as task 10 >> [TMR] Starting itti queue: TASK_RRC_ENB as task 11 >> [TMR] Starting itti queue: TASK_RAL_ENB as task 12 >> [TMR] Starting itti queue: TASK_S1AP as task 13 >> [TMR] Starting itti queue: TASK_X2AP as task 14 >> [TMR] Starting itti queue: TASK_SCTP as task 15 >> [TMR] Starting itti queue: TASK_ENB_APP as task 16 >> [TMR] Starting itti queue: TASK_FLEXRAN_AGENT as task 17 >> [TMR] Starting itti queue: TASK_PHY_UE as task 18 >> [TMR] Starting itti queue: TASK_MAC_UE as task 19 >> [TMR] Starting itti queue: TASK_RLC_UE as task 20 >> [TMR] Starting itti queue: TASK_PDCP_UE as task 21 >> [TMR] Starting itti queue: TASK_RRC_UE as task 22 >> [TMR] Starting itti queue: TASK_NAS_UE as task 23 >> [TMR] Starting itti queue: TASK_RAL_UE as task 24 >> [TMR] Starting itti queue: TASK_MSC as task 25 >> [TMR] Starting itti queue: TASK_GTPV1_U as task 26 >> [TMR] Starting itti queue: TASK_UDP as task 27 >> [TMR] Starting itti queue: TASK_CU_F1 as task 28 >> [TMR] Starting itti queue: TASK_DU_F1 as task 29 >> [CONFIG] opt: 3/3 parameters successfully set >> [OPT] OPT disabled >> [PDCP] pdcp init,usegtp >> RRC control socket >> PDCP PC5S socket >> [RRC] Listening to incoming connection from ProSe App >> reported resolution = 1 ns >> [HW] Version: Branch: develop Abrev. Hash: f8288afe1 Date: Wed Jul 24 >> 23:00:59 2019 +0200 >> Card 0, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq >> 262500.00, rx_freq 262500.00 >> Card 0, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq >> 0.00, rx_freq 0.00 >> Card 0, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq >> 0.00, rx_freq 0.00 >> Card 0, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq >> 0.00, rx_freq 0.00 >> [PHY] USRP clock source not specified. defaulting to internal >> Card 1, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq >> 262500.00, rx_freq 262500.00 >> Card 1, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq >> 0.00, rx_freq 0.00 >> Card 1, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq >> 0.00, rx_freq 0.00 >> Card 1, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq >> 0.00, rx_freq 0.00 >> [PHY] USRP clock source not specified. defaulting to internal >> Card 2, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq >> 262500.00, rx_freq 262500.00 >> Card 2, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq >>
Re: [USRP-users] USRP B210 ERROR
Khizar, Is this still an issue for you? There's an important step in the UHD install process to allow USB devices to be used by non-root users: https://files.ettus.com/manual/page_transport.html#transport_usb_udev Let me know if this does the trick. Sam On Tue, Sep 24, 2019 at 1:10 AM Khizar Abbas via USRP-users < usrp-users@lists.ettus.com> wrote: > I have tried this /usr/local/lib/uhd/utils/uhd_images_downloader.py > download the image and install it. but the error is still same no device > found. Even i have tried to download the drivers again. still same error. > Please suggest some solution. Below is log in the response of the command . > check the error in Bold text below. > Thanks > ncl@rasputin:~/openairinterface5g/cmake_targets/lte_build_oai/build$ sudo > -E ./lte-uesoftmodem -C 262500 -r 25 --ue-rxgain 125 --ue-txgain 90 > --ue-scan-carrier -d > [CONFIG] get parameters from cmdline , debug flags: 0x0040 > # /dev/cpu_dma_latency set to 0us > [CONFIG] log_config: 2/3 parameters successfully set > [CONFIG] log_config: 42/42 parameters successfully set > [CONFIG] log_config: 42/42 parameters successfully set > [CONFIG] log_config: 15/15 parameters successfully set > [CONFIG] log_config: 15/15 parameters successfully set > log init done > Reading in command-line options > [CONFIG] (root): 19/22 parameters successfully set > [CONFIG] (root): 4/5 parameters successfully set > [ENB_APP] nfapi running mode: MONOLITHIC > Running with 1 UE instances > [CONFIG] TTracer: 4/4 parameters successfully set > CPU Freq is 3.000175 > ITTI init > [TMR] Starting itti queue: TASK_UNKNOWN as task 0 > [TMR] Starting itti queue: TASK_TIMER as task 1 > [TMR] Starting itti queue: TASK_L2L1 as task 2 > [TMR] Starting itti queue: TASK_BM as task 3 > [TMR] Starting itti queue: TASK_PHY_ENB as task 4 > [TMR] Starting itti queue: TASK_MAC_ENB as task 5 > [TMR] Starting itti queue: TASK_RLC_ENB as task 6 > [TMR] Starting itti queue: TASK_RRC_ENB_NB_IoT as task 7 > [TMR] Starting itti queue: TASK_PDCP_ENB as task 8 > [TMR] Starting itti queue: TASK_DATA_FORWARDING as task 9 > [TMR] Starting itti queue: TASK_END_MARKER as task 10 > [TMR] Starting itti queue: TASK_RRC_ENB as task 11 > [TMR] Starting itti queue: TASK_RAL_ENB as task 12 > [TMR] Starting itti queue: TASK_S1AP as task 13 > [TMR] Starting itti queue: TASK_X2AP as task 14 > [TMR] Starting itti queue: TASK_SCTP as task 15 > [TMR] Starting itti queue: TASK_ENB_APP as task 16 > [TMR] Starting itti queue: TASK_FLEXRAN_AGENT as task 17 > [TMR] Starting itti queue: TASK_PHY_UE as task 18 > [TMR] Starting itti queue: TASK_MAC_UE as task 19 > [TMR] Starting itti queue: TASK_RLC_UE as task 20 > [TMR] Starting itti queue: TASK_PDCP_UE as task 21 > [TMR] Starting itti queue: TASK_RRC_UE as task 22 > [TMR] Starting itti queue: TASK_NAS_UE as task 23 > [TMR] Starting itti queue: TASK_RAL_UE as task 24 > [TMR] Starting itti queue: TASK_MSC as task 25 > [TMR] Starting itti queue: TASK_GTPV1_U as task 26 > [TMR] Starting itti queue: TASK_UDP as task 27 > [TMR] Starting itti queue: TASK_CU_F1 as task 28 > [TMR] Starting itti queue: TASK_DU_F1 as task 29 > [CONFIG] opt: 3/3 parameters successfully set > [OPT] OPT disabled > [PDCP] pdcp init,usegtp > RRC control socket > PDCP PC5S socket > [RRC] Listening to incoming connection from ProSe App > reported resolution = 1 ns > [HW] Version: Branch: develop Abrev. Hash: f8288afe1 Date: Wed Jul 24 > 23:00:59 2019 +0200 > Card 0, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq > 262500.00, rx_freq 262500.00 > Card 0, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > Card 0, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > Card 0, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > [PHY] USRP clock source not specified. defaulting to internal > Card 1, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq > 262500.00, rx_freq 262500.00 > Card 1, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > Card 1, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > Card 1, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > [PHY] USRP clock source not specified. defaulting to internal > Card 2, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq > 262500.00, rx_freq 262500.00 > Card 2, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > Card 2, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > Card 2, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq > 0.00, rx_freq 0.00 > [PHY] USRP clock source not
[USRP-users] USRP B210 ERROR
I have tried this /usr/local/lib/uhd/utils/uhd_images_downloader.py download the image and install it. but the error is still same no device found. Even i have tried to download the drivers again. still same error. Please suggest some solution. Below is log in the response of the command . check the error in Bold text below. Thanks ncl@rasputin:~/openairinterface5g/cmake_targets/lte_build_oai/build$ sudo -E ./lte-uesoftmodem -C 262500 -r 25 --ue-rxgain 125 --ue-txgain 90 --ue-scan-carrier -d [CONFIG] get parameters from cmdline , debug flags: 0x0040 # /dev/cpu_dma_latency set to 0us [CONFIG] log_config: 2/3 parameters successfully set [CONFIG] log_config: 42/42 parameters successfully set [CONFIG] log_config: 42/42 parameters successfully set [CONFIG] log_config: 15/15 parameters successfully set [CONFIG] log_config: 15/15 parameters successfully set log init done Reading in command-line options [CONFIG] (root): 19/22 parameters successfully set [CONFIG] (root): 4/5 parameters successfully set [ENB_APP] nfapi running mode: MONOLITHIC Running with 1 UE instances [CONFIG] TTracer: 4/4 parameters successfully set CPU Freq is 3.000175 ITTI init [TMR] Starting itti queue: TASK_UNKNOWN as task 0 [TMR] Starting itti queue: TASK_TIMER as task 1 [TMR] Starting itti queue: TASK_L2L1 as task 2 [TMR] Starting itti queue: TASK_BM as task 3 [TMR] Starting itti queue: TASK_PHY_ENB as task 4 [TMR] Starting itti queue: TASK_MAC_ENB as task 5 [TMR] Starting itti queue: TASK_RLC_ENB as task 6 [TMR] Starting itti queue: TASK_RRC_ENB_NB_IoT as task 7 [TMR] Starting itti queue: TASK_PDCP_ENB as task 8 [TMR] Starting itti queue: TASK_DATA_FORWARDING as task 9 [TMR] Starting itti queue: TASK_END_MARKER as task 10 [TMR] Starting itti queue: TASK_RRC_ENB as task 11 [TMR] Starting itti queue: TASK_RAL_ENB as task 12 [TMR] Starting itti queue: TASK_S1AP as task 13 [TMR] Starting itti queue: TASK_X2AP as task 14 [TMR] Starting itti queue: TASK_SCTP as task 15 [TMR] Starting itti queue: TASK_ENB_APP as task 16 [TMR] Starting itti queue: TASK_FLEXRAN_AGENT as task 17 [TMR] Starting itti queue: TASK_PHY_UE as task 18 [TMR] Starting itti queue: TASK_MAC_UE as task 19 [TMR] Starting itti queue: TASK_RLC_UE as task 20 [TMR] Starting itti queue: TASK_PDCP_UE as task 21 [TMR] Starting itti queue: TASK_RRC_UE as task 22 [TMR] Starting itti queue: TASK_NAS_UE as task 23 [TMR] Starting itti queue: TASK_RAL_UE as task 24 [TMR] Starting itti queue: TASK_MSC as task 25 [TMR] Starting itti queue: TASK_GTPV1_U as task 26 [TMR] Starting itti queue: TASK_UDP as task 27 [TMR] Starting itti queue: TASK_CU_F1 as task 28 [TMR] Starting itti queue: TASK_DU_F1 as task 29 [CONFIG] opt: 3/3 parameters successfully set [OPT] OPT disabled [PDCP] pdcp init,usegtp RRC control socket PDCP PC5S socket [RRC] Listening to incoming connection from ProSe App reported resolution = 1 ns [HW] Version: Branch: develop Abrev. Hash: f8288afe1 Date: Wed Jul 24 23:00:59 2019 +0200 Card 0, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq 262500.00, rx_freq 262500.00 Card 0, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 Card 0, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 Card 0, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 [PHY] USRP clock source not specified. defaulting to internal Card 1, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq 262500.00, rx_freq 262500.00 Card 1, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 Card 1, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 Card 1, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 [PHY] USRP clock source not specified. defaulting to internal Card 2, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq 262500.00, rx_freq 262500.00 Card 2, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 Card 2, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 Card 2, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 [PHY] USRP clock source not specified. defaulting to internal Card 3, channel 0, Setting tx_gain 90.00, rx_gain 125.00, tx_freq 262500.00, rx_freq 262500.00 Card 3, channel 1, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 Card 3, channel 2, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 Card 3, channel 3, Setting tx_gain 0.00, rx_gain 125.00, tx_freq 0.00, rx_freq 0.00 [PHY] USRP clock source not specified. defaulting to internal Card 4, channel 0,
Re: [USRP-users] USRP B210 Error
Hi Khizar - Have you tried doing what the error recommends ... executing "/usr/local/lib/uhd/utils/uhd_images_downloader.py"? It could be that you just need to download the images for your specific UHD install. Hope this helps! - MLD On Thu, Sep 19, 2019 at 4:03 AM Khizar Abbas via USRP-users < usrp-users@lists.ettus.com> wrote: > Dear all, > i am using two USRP b210 device for my project. My goal is to deploy LTE > connection . but one of my device is working properly and other one is > showing error no device found. > when i used the sudo uhd_usrp_probecommand. its shows error > UHD Warning: > EnvironmentError: IOError: Could not find path for image: > usrp_b200_fw.hex > Using images directory: > Set the environment variable 'UHD_IMAGES_DIR' appropriately or follow > the below instructions to download the images package. > Please run: > "/usr/local/lib/uhd/utils/uhd_images_downloader.py" > Error: LookupError: KeyError: No devices found for -> > Empty Device Address > > I have already tried many solution from internet but dont get > success.Please suggest me any proper solution for this error. > > Thanks > Khizar abbas > Jeju national University SOuth Korea > ___ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > -- Michael Dickens, Mac OS X Programmer Ettus Research Technical Support Email: supp...@ettus.com Web: http://www.ettus.com ___ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
[USRP-users] USRP B210 Error
Dear all, i am using two USRP b210 device for my project. My goal is to deploy LTE connection . but one of my device is working properly and other one is showing error no device found. when i used the sudo uhd_usrp_probecommand. its shows error UHD Warning: EnvironmentError: IOError: Could not find path for image: usrp_b200_fw.hex Using images directory: Set the environment variable 'UHD_IMAGES_DIR' appropriately or follow the below instructions to download the images package. Please run: "/usr/local/lib/uhd/utils/uhd_images_downloader.py" Error: LookupError: KeyError: No devices found for -> Empty Device Address I have already tried many solution from internet but dont get success.Please suggest me any proper solution for this error. Thanks Khizar abbas Jeju national University SOuth Korea ___ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
