Can confirm: If you're building GNU Radio from source, it'll work with
almost any version of UHD (note that on next branch, we've finally
bumped the minimum UHD version, but it's something like 3.5.5 or so).
-- M
On 02/01/2018 05:29 PM, Ron Economos via USRP-users wrote:
> I think the
Hi all,
Thank for the alternatives. I will think about it.
Best regards,
Alejandro
El 8 feb. 2018 3:37 p. m., "Manuel Uhm via USRP-users" <
usrp-users@lists.ettus.com> escribió:
> Hi Alejandro.
>
> To confirm one of Marcus' comments, unfortunately, The MathWorks do not
> yet have support for
Hi everyone,
I seem to be having issues with the B210 transmitting at an incredibly low
power.
I seem to be getting a 60db difference at the receiver (spectrum analyzer)
between the B210 and N210 with perfectly identically configured
transmissions using the simple uhd "tx_waveform" example
On 02/09/2018 02:48 PM, Jonathan B via USRP-users wrote:
Hi Jeff,
Thanks for the response.
In both cases a gain of 20dB.
Best,
Jonathan
The total gain-control range on the B2xx family is larger (80dB) than on
the cards used on X3xxx, N2xx, etc (typically 30.5dB)
Try larger gain values on
Hi Jeff,
Thanks for the response.
In both cases a gain of 20dB.
Best,
Jonathan
On Feb 9, 2018 8:23 PM, "Jeff Long via USRP-users" <
usrp-users@lists.ettus.com> wrote:
> What are you using for gain settings?
>
> On 02/09/2018 01:09 PM, Jonathan B via USRP-users wrote:
>
>> Hi everyone,
>>
>> I
Hi everyone,
As a very newbie with SDRs, I want to use an USRP to listen to two
different, but close frequencies and distinguish them (the frequencies
are not fixed yet). I would like to implement two bandpass filters and
look at the output of both filters, but I am not sure how to proceed. Is
it
Hi folks!
I am wondering if it is possible to receive on all 4 inputs at the same
time on the E310/E312? I.e. is it possible to receive on TRX A, RX A, TRX
B, RX B all at the same time? I tried creating a GNU Radio flowchart with
this setup and got the following Runtime Error:
On 02/09/2018 11:01 PM, Ronakraj Gosalia via USRP-users wrote:
Hi folks!
I am wondering if it is possible to receive on all 4 inputs at the
same time on the E310/E312? I.e. is it possible to receive on TRX A,
RX A, TRX B, RX B all at the same time? I tried creating a GNU Radio
flowchart with
Hello,
For more details, please find attached the received signal in the time
domain. Clearly after the end of the packet, the signal takes a certain
time to come back to "the ambient noise". If I zoom, I notice there is
still some noise 40ms after the packet. It can disturb the reception of