Hi Derek,
That makes sense, yeah. Thanks!
2018-02-12 23:42 GMT+01:00 Derek Kozel :
> Hello Jonathan,
>
> The gain setting in the USRPs are indexed from minimum gain. On most this
> means a gain of 0 is actually an attenuation of the signal. The N210's gain
> range is
Hello,
I've noticed that the isolation between the Tx/Rx and the Rx2 port is
quite poor at the upper frequencies ~22dB at 5.9GHz. Could you explain
if this is to be expected? Would it be possible to know which switch you
are using? Any way to improve the isolation?
cheers,
Dominik
--
--
Hi.
We have bought a B200 board and are having issues simply receiving the
samples and would like some support in the matter.
Running the command
./rx_samples_to_file --null --rate 5600
on a Sony Vaio Z with an I5-3210M running Ubuntu Server 17.10 shows a
high CPU usage of ~78%.
Is such a
Hi all,
I think I may have identified the problem. See what you think.
I added a bit more info output to the tx_timed_loop.cpp test program (see
attached) and made note of the time a packet is scheduled to go out versus the
time the send loop completes.
Keeping in mind that the loop runs as
Hi,
I am interested in controlling LO frequency using E312 in such a way that timed
command must be used. However, as far as I know, E312 doesn't support timed
command for RF front end. So I am thinking if I could write some simple modules
in Verilog HDL setting up LO frequency. I am wondering
On 02/13/2018 04:52 AM, Kasper Føns via USRP-users wrote:
Hi.
We have bought a B200 board and are having issues simply receiving the
samples and would like some support in the matter.
Running the command
./rx_samples_to_file --null --rate 5600
on a Sony Vaio Z with an I5-3210M running
Hi Kasper,
There are several caveats/issues/topics to consider with regards to running
at higher sample rates with the B2xx. Generally speaking, Linux will offer
better performance than Windows.
What version of UHD are you using? If you're not using UHD 3.10.3.0, can
you please try upgrading?
What would the equivalent of this be for the e310?
On Tue, Feb 13, 2018 at 16:23 Marcus D. Leech via USRP-users <
usrp-users@lists.ettus.com> wrote:
> On 02/13/2018 03:30 AM, Dominik Eyerly via USRP-users wrote:
>
> Hello,
>
> I've noticed that the isolation between the Tx/Rx and the Rx2 port
On 02/13/2018 03:30 AM, Dominik Eyerly via USRP-users wrote:
Hello,
I've noticed that the isolation between the Tx/Rx and the Rx2 port is
quite poor at the upper frequencies ~22dB at 5.9GHz. Could you explain
if this is to be expected? Would it be possible to know which switch
you are