that at that point, you'll necessarily be doing all your dev work in a Linux
environment, so that one would wonder why you'd be running Linux in a VM to
start with.
Best regards,
Marcus
On 07/30/2017 10:29 PM, Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC]
via USRP-users wrote:
To All,
First
Hello All,
I have the E310 hooked up with an Ethernet wire, and I can ping from my Linux
Ubuntu Virtual machine (created by Oracle VirtualBox software).
But when I try to SSH, I did get access denied.. until I added a VM rule for
port 22 in Network Settings of the VM.
But now I get the
[cid:image001.jpg@01D30C52.2A2166C0]
From: USRP-users [mailto:usrp-users-boun...@lists.ettus.com] On Behalf Of
Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
Sent: Thursday, August 03, 2017 12:13 PM
To: Neel Pandeya <neel.pand...@ettus.com>
Cc: usrp-users@lists.ett
he SSH server?
--Neel Pandeya
On 3 August 2017 at 08:07, Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES
INC] via USRP-users
<usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote:
Hello All,
I have the E310 hooked up with an Ethernet wire, and I can ping from my Lin
there is no previous password.
Any other ideas???
Thanks
-Original Message-
From: USRP-users [mailto:usrp-users-boun...@lists.ettus.com] On Behalf Of
Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
Sent: Thursday, August 03, 2017 2:27 PM
To: Nate Temple <nate.
:39 PM
To: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC]
<konstantin.j.math...@nasa.gov>; usrp-users@lists.ettus.com
Subject: Re: [USRP-users] When ssh'ing Getting prompt for Password Issue
On 08/03/2017 11:07 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC]
via USRP
-users
> <usrp-users@lists.ettus.com> wrote:
>
> On 08/03/2017 11:07 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
> TECHNOLOGIES INC] via USRP-users wrote:
>> Hello All,
>>
>> I have the E310 hooked up with an Ethernet wire, and I can ping from my
>> L
gt; Issue
> >
> > Hi Konstantin,
> >
> > You may want to try putting your VM into a Bridge Network mode. There may
> > be an issue with the NAT routing. If operating in Bridged mode, ensure your
> > Host, VM and E3xx all have different IP addresses.
&
issue with the NAT routing. If operating in Bridged mode, ensure your
> Host, VM and E3xx all have different IP addresses.
>
> Regards,
> Nate Temple
>
>
>
>> On Aug 3, 2017, at 9:39 AM, Philip Balister via USRP-users
>> <usrp-users@lists.ettus.com<mailto:
[USRP-users] When ssh'ing Getting prompt for Password
>>> Issue
>>>
>>> Hi Konstantin,
>>>
>>> You may want to try putting your VM into a Bridge Network mode. There may
>>> be an issue with the NAT routing. If operating in Bridged mode, ensure your
SB devices to make the virtual machine
recognize it. Perhaps you're skipping this step?
Regards,
Leo.
On Sat, Jul 15, 2017 at 5:08 PM Matheou, Konstantin J. (GRC-LCI0)[ZIN
TECHNOLOGIES INC] via USRP-users
<usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote:
I have follow
/usr/local/. uhd_images_downloader will be located
/usr/local/lib/uhd/utils/uhd_image_downloader.py
Regards,
Nate Temple
> On Jul 14, 2017, at 9:28 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
> TECHNOLOGIES INC] via USRP-users <usrp-users@lists.ettus.com> wrote:
>
>
> He
ize it. Perhaps you're skipping this step?
Regards,
Leo.
On Sat, Jul 15, 2017 at 5:08 PM Matheou, Konstantin J. (GRC-LCI0)[ZIN
TECHNOLOGIES INC] via USRP-users
<usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote:
I have followed Nate's advice, at least I
To All,
First thank you for your help for the previous installation issue I had with
the B210. But now, the E310 came in and there is a different installation
process as most of us know. Unfortunatley, I am not 100% connected correctly
with the E310 and need the forum' s assistance.
This
Sorry Nate.. It's at the end of the day.. I forgot to place root in front the
IP address... In other words, the command was ssh 192.168.10.2 - it was
missing the root.. Sorry...
-Original Message-
From: Nate Temple [mailto:nate.tem...@ettus.com]
Sent: Tuesday, August 08, 2017 5:23
I think we are almost there
The Ip address for the VM is what was stated in the document 192.168.10.1 and
24 for mask
I did the ip a command and retried the sh command.. still got
kmatheou@192.168.10.2
Do I need to alter the VM to another value and not the host of .1???
-Original
Nate,
Thanks for all of your help
I had to undo and redo the Network Bridged Mode.. at least that is what I think
did it I did so many other things too
I got the example working...
So, that means I got in via ssh and now I can start doing work by creating
files and sshing them
Nate... I rebooted the E310 by shutting it down via the software shutdown -h
now command...
When it came back up and I logged in as root.. When I tried pinging, it stated
the host is unreachable...
I di the ifdown and ifup and ip a and then the ping command again, and still
the same issue.
To All,
I realize this is a rookie question, but I looked all over on the net to find
the answer.
First off, I realize that thGNU radio and UHD.
So, I realize I need to create a pythin file offline via GNU radio Companion on
my laptop. And of course, do not include any graphical functions.
Nate,
I hope there is no issue with the hardware... OK.. we are now in debug mode I
guess... I hope you can hang out a little quicker with me to get this
resolved... I appreciate it...
Below is the Disk Management program screen shot and I placed the files that
got placed on the micro
I am wearing my reading glasses and the letters were very small too...
I took the picture and zoomed in on it with my phone..
It is 3117FF1
-Original Message-
From: Nate Temple [mailto:nate.tem...@ettus.com]
Sent: Tuesday, August 08, 2017 3:25 PM
To: Matheou, Konstantin J.
Just sent it to you via my phone... Please tell me if you received it...
-Original Message-
From: Nate Temple [mailto:nate.tem...@ettus.com]
Sent: Tuesday, August 08, 2017 3:39 PM
To: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC]
Cc: Marcus
OK Good News...
Got all the way to the ping of the unit...
When I tried ssh'iing, I received a message stating - warning remote host
identification has changed...
Add correct host key
ECDSA host key fopr 192.168.10.2 has changed and you have requested strict
checking.
Host verification
I will do this.. But I closed the VM and went back in and no the ping command
states the host is unreachable...
Confusing...
-Original Message-
From: Nate Temple [mailto:nate.tem...@ettus.com]
Sent: Tuesday, August 08, 2017 4:24 PM
To: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES
First off, per the instructions, I have both cables hooked up at the same
time Should I remove the serial cable when ssh'ing?
I have been rebooting the hardware via the button, and once I get to the login
prompt, things are locking
And of course, I have been verifying the settings
OK.. I got back in again and I am pinging...
-Original Message-
From: Nate Temple [mailto:nate.tem...@ettus.com]
Sent: Tuesday, August 08, 2017 4:48 PM
To: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC]
Cc: Marcus Müller
I cannot find that specific file.. Is it somewhere else???
But I did find a file within the ssh directory called ssh_config where there is
a parameter called HashKnownHosts Yes.. do I have to do anything with that?
-Original Message-
From: Nate Temple [mailto:nate.tem...@ettus.com]
Sorry Nate... It seems the file was hidden.. I removed it...
I redid the ssh command and typed yes when asksed..
Then it asked for a password, and just hit enter... but it did not let me
in.
Actually, the name on the command is kmatheou@192.168.10.2 not
root@192.168.10.2 kmatheou is the
The error I get is - Permission Denied (publickey, password,
keyboard-interactive)
-Original Message-
From: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC]
Sent: Tuesday, August 08, 2017 4:59 PM
To: 'Nate Temple'
Cc: 'Marcus Müller'
Btw.. just to validate what image I used...
I have the E310 E version...
The instructions I think may not be correct... Here they are cut and paste...
Please validate
For the E310, the product number will be 156333X-01L, where X is a letter from
A to Z. For devices where X is A, B, C,
gt; >>> usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
> >>> Subject: Re: [USRP-users] When ssh'ing Getting prompt for Password
> >>> Issue
> >>>
> >>> Hi Konstantin,
> >>>
> >>> When operating in
Nate,
The instructions are very well written and detailed.. Thanks...
Actually, most of the steps I was doing correctly from all the various portions
of documents. But it is good you placed all in one document. Thanks...
Everything worked well up until I burned the image.
When I did the
image.
https://sourceforge.net/projects/win32diskimager/
Regards,
Derek
On Sun, Aug 6, 2017 at 8:51 PM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
TECHNOLOGIES INC] via USRP-users
<usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote:
Nate,
Thanks for the instructions...
I am trying
static) IP
> >>> address within your VM?
> >>>
> >>> Regards,
> >>> Nate Temple
> >>>
> >>>> On Aug 3, 2017, at 11:27 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
> >>>> TECHNOLOGIES INC] <kons
gt;>>
> >>> Hi Konstantin,
> >>>
> >>> When operating in bridged mode, did you manually set the (static) IP
> >>> address within your VM?
> >>>
> >>> Regards,
> >>> Nate Temple
> >>>
> >
>>> When operating in bridged mode, did you manually set the (static) IP
> >>> address within your VM?
> >>>
> >>> Regards,
> >>> Nate Temple
> >>>
> >>>> On Aug 3, 2017, at 11:27 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
>
> >>> Subject: Re: [USRP-users] When ssh'ing Getting prompt for Password
> >>> Issue
> >>>
> >>> Hi Konstantin,
> >>>
> >>> When operating in bridged mode, did you manually set the (static) IP
> >>> address w
e is one from SparkFun which covers Windows and Linux.
https://learn.sparkfun.com/tutorials/sd-cards-and-writing-images
Regards,
Derek
On Mon, Aug 7, 2017 at 4:42 PM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
TECHNOLOGIES INC] via USRP-users
<usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Thanks for any help...
I ran the example file from Ettus called rx_samples_to_file.cpp.
I ran the file and it did extract a binary file that I named.
When I analyzed it in matlab using the function 'read_float_binary.m', I
received much Nan's and zeros with actual data...
When I ran the
arcus D. Leech via USRP-users
Sent: Wednesday, April 04, 2018 12:51 AM
To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: Re: [USRP-users] Assistance In Stopping Python Script After Removing
Ethernet Connection
On 04/04/2018 12:37 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
To All,
I have tried to use the Header block approach which is found on the Internet to
try to fix this issue...
Here is the issue...
I am capturing samples via an antenna on the E310.
I used GRC to create the flowgraph to capture samples to go to a file.
But, I have to remove the ethernet
In Stopping Python Script After Removing
Ethernet Connection
On 04/04/2018 12:37 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC]
via USRP-users wrote:
To All,
I have tried to use the Header block approach which is found on the Internet to
try to fix this issue...
Here is the issue...
I
42 matches
Mail list logo