Hello Kim: Since you mention a MIMO cable, I assume that you are using USRP 2 / N200 / N210.
Do the following: 1. Assign unique IP addresses to one of the USRPs (if you haven't yet). See: https://files.ettus.com/manual/page_usrp2.html#usrp2_network_changeip 2. Set "Device Address" or "Device Arguments" parameter of the GNU Radio UHD blocks to address specific USRP devices. See: https://files.ettus.com/ manual/page_identification.html Regards, Kyeong Su Shin On Thu, Feb 8, 2018 at 12:49 PM, 김무연 via USRP-users < usrp-users@lists.ettus.com> wrote: > Recently I am researching using two usrp, and I use gnuradio program > > Through gnuradio I can handle one usrp > > To conduct experiment, I need to connect two usrp > > To connect usrp I used two method > > First one is unsing mimo cable > > Last one is using giga-bit desktop switch > > By using both method I can check two usrps are connected > > But when I execute gnuradio, only one of them sends a signal, the other > doesn’t work > > I need to find the way to use two usrps simultaneously > > Are there any method to connect usrps or any method to send signals from > both usrps simultaneously in gnuradio? > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
