Re: [vchkpw] Compiled FreeBSD 4.8

2003-08-28 Thread Michael Bowe
Hi Raymond From memory you have used my webmail server guide to install your vpopmail system If this is the case, and you now want to convert to using roaming users, then I suggest you will need to do these steps : * mv /etc/tcp.smtp* /home/vpopmail/etc * editthe file

[vchkpw] qmail + vpopmail + maildrop + sqwebmail + qmailadmin + vqadmin

2003-08-28 Thread Casey Zacek
It's been a long long time since I last looked at this stuff, but I really want/need to implement it. 1 - qmail - is simple. 2 - vpopmail + maildrop - this is where i am now (again). As I recall it, my problems went something like this: A. I had to mkdir courier when building maildrop to get

[vchkpw] Re: qmail + vpopmail + maildrop + sqwebmail + qmailadmin + vqadmin

2003-08-28 Thread Paul L. Allen
Casey Zacek writes: Basically, I'm looking for any pointers for getting vpopmail, maildrop, and sqwebmail working together nicely. Since it's been a long time since you've looked at it, you will probably be surprised to learn that sqwebmail now supports the generation of maildrop filter

[vchkpw] Entourage for Mac/Qmail Error

2003-08-28 Thread adennis
We just had e-filter installed on our Qmail server. Upon installation, we had a global smtp authentication problem (people couldn't authenticate) that was solved. When this problem was fixed, a user who has Entourage for Mac indicated that his office still could not send mail. Previously he got

[vchkpw] Re /var/mail/vpopmail

2003-08-28 Thread Jasper Metselaar
Doublebounce settings and .qmail files are ok. Below is a header of a message dumped to /var/mail/vpopmail. As you can see, this is not a bounce message... it's the original. When I sent this message to a non existing address the message was dumped to /var/mail/vpopmail and a non-delivery report

[vchkpw] Some help needed [Off-topic]

2003-08-28 Thread Tanmaya Anand
Hi all, Below is out of ps command on our mail server. Can anyone help me figureout is this any malacious attempt. Regards, Tanmaya [EMAIL PROTECTED] ~]$ ps ax | grep qmail17923 ? S 0:07 qmail-send17924 ? S 0:06 splogger qmail17925 ? S 0:00 qmail-lspawn |preline procmail17927 ? S

RE: [vchkpw] Some help needed [Off-topic]

2003-08-28 Thread Shane Chrisp
You will need to supply a bit more information for anyone to be able to help you out. However it could be that your server is an open relay, that one of your users is spamming, or that you just felt like sending out loads of email. Post your qmail-smtpd and pop startup files, and what options you

[vchkpw] Problem with latest release of vpopmail 5.3.26a

2003-08-28 Thread Tobias
Hi1 I´v got a problem with the latest release of vpopmail 5.3.26a. I´m running the mysql setup and everything wen´t well during install. But when i try to login with pop3 it rejects my password and i get a -ERR authentication failed. In the maillog it says like this. Aug 28 15:18:42 apache

[vchkpw] Vpopmail problem in mysql

2003-08-28 Thread Zafar Rizvi
Hi All I am installing Qmail on redhat 8 with vpopmail. I have two server running for qmail.I have one server Qmail server and on other Qmail server, database(mysql) qmail is running. Now on both Qmail machine vpopmail is installed with mysql database support and it is configured fine

Re: [vchkpw] Vpopmail problem in mysql

2003-08-28 Thread Tobias
Check the file ~vpopmail/etc/vpopmail.mysql that the password or the other things are correct. //Tobias - Original Message - From: Zafar Rizvi To: [EMAIL PROTECTED] Sent: Thursday, August 28, 2003 5:43 PM Subject: [vchkpw] Vpopmail problem in mysql Hi

RE: [vchkpw] qmail + vpopmail + maildrop + sqwebmail + qmailadmin + vqadmin

2003-08-28 Thread Clayton Weise
Not quite sure how your setup is.. but I finally got maildrop/vpopmail working for me by using a version of vpopmail that has the seekable patch and putting a .qmail file inside each user's directory who wants a spam filter. It has worked out beneficially for me because the spam filter can now be

RE: [vchkpw] Vpopmail problem in mysql

2003-08-28 Thread Shane Chrisp
Title: Message Also check that the user you are connectingto mysql with, that access's the vpopmail database has access from 192.168.0.3. You may have only configured the user to have access from localhost on the qmail/mysql server Shane -Original Message-From: Tobias

RE: [vchkpw] Re /var/mail/vpopmail

2003-08-28 Thread Clayton Weise
What does your /var/qmail/rc file look like? -Original Message- From: Jasper Metselaar [mailto:[EMAIL PROTECTED] Sent: Thursday, August 28, 2003 7:38 AM To: [EMAIL PROTECTED] Subject: [vchkpw] Re /var/mail/vpopmail Doublebounce settings and .qmail files are ok. Below is a header of a

[vchkpw] qmail+vpopmail problem forking vchkpw?

2003-08-28 Thread Clinton James
I'm working in gentoo with qmail 1.03 and vpopmail 5.2.1. POP works just fine but authenticated STMP is a bust. Using some of the information I have found here and other places I used strace to try and find out what the problem is. As best as I can tell I am getting a bad file descripter when

Re: [vchkpw] qmail+vpopmail problem forking vchkpw?

2003-08-28 Thread Rick Macdougall
Hi, Clinton James wrote: I'm working in gentoo with qmail 1.03 and vpopmail 5.2.1. POP works just fine but authenticated STMP is a bust. Using some of the information I have found here and other places I used strace to try and find out what the problem is. As best as I can tell I am getting a

[vchkpw] Can not get vpopmail to enable roaming support

2003-08-28 Thread Raymond Luong
Please HelpI recompile vpopmail with --enable roaming=y-- butit still does not work. I can connect to via pop3 server but can not send mail. It reply with "domain isn't in my list of allow rcpthosts". I don't know what's wrong or what I'd missing. I really need to get this up and running. Any help

[vchkpw] vpopmail and qmailadmin

2003-08-28 Thread Steven Job
Hello, Does vpopmail analyze the qmaillimits all of the time or do you have to do something to enable it? Because as I disable permissions (disable_pop for example) they are often ignored. I am able to set the qmailadmin limits (using the mysql version and the flat file verion) but it

RE: [vchkpw] Can not get vpopmail to enable roaming support

2003-08-28 Thread Raymond Luong
This is my qmail-smtp/run file:#!/bin/sh QMAILDUID=`id -u qmaild` NOFILESGID=`id -g qmaild` MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` LOCAL=`head -1 /var/qmail/control/me` if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z "$LOCAL" ]; then echo QMAILDUID,

Re: [vchkpw] Can not get vpopmail to enable roaming support

2003-08-28 Thread Steven Job
I'm having just the oposite problem, I can't turn it off when I want to. :-) Not quite sure if this helps but here is configuration information I used. ./configure \ --enable-roaming-users=y \ --enable-tcprules-prog=/usr/local/bin/tcprules \

RE: [vchkpw] vpopmail and qmailadmin

2003-08-28 Thread Clayton Weise
Not sure if things have changed in recent versions, but after changing the setting on the domain I had to change it for each user as well. -Clayton -Original Message- From: Steven Job [mailto:[EMAIL PROTECTED] Sent: Thursday, August 28, 2003 9:59 AM To: [EMAIL PROTECTED] Subject:

RE: [vchkpw] Can not get vpopmail to enable roaming support

2003-08-28 Thread Shane Chrisp
You have put tcp.smtp as you cdb file? Its normally tcp.smtp.cdb. May be that your file is empty and being ignored? Shane -Original Message- From: Steven Job [mailto:[EMAIL PROTECTED] Sent: Friday, 29 August 2003 1:12 AM To: Raymond Luong Cc: vpopmail list Subject: Re: [vchkpw] Can not

Re: [vchkpw] Can not get vpopmail to enable roaming support

2003-08-28 Thread Steven Job
Raymond, Are you using: --enable-learn-passwords=y \ I just tried it without it and it didn't work. Try adding that and see if it works. -Steve On Thu, 28 Aug 2003, Raymond Luong wrote: Please Help I recompile vpopmail with --enable roaming=y-- but it still does not work. I

RE: [vchkpw] Can not get vpopmail to enable roaming support

2003-08-28 Thread Steven Job
I just switched it from /etc/tcp.smtp to /etc/tcp.smtp.cdb and now I can not relay at all. Very strange. -Steve On Fri, 29 Aug 2003, Shane Chrisp wrote: You have put tcp.smtp as you cdb file? Its normally tcp.smtp.cdb. May be that your file is empty and being ignored? Shane

RE: [vchkpw] Can not get vpopmail to enable roaming support

2003-08-28 Thread Raymond Luong
SteveI didn't change the tcp.cmtp to tcp.smtp.cdb. I simple link my /etc/tcp.smtp to ~vpopmail/etc/tcp.smtp and made the file 777 so any program can write to it. Now vpopmail and qmail is sharing the same tcp.smtp file. I believe I might had left out a few important setting while compiling

Re: [vchkpw] Some help needed [Off-topic]

2003-08-28 Thread Darcy Dueck
I know AOL has implemented some blacklists of mail servers originating from Dynamic IP address blocks, so that could be a problem if it thinks you or your ISP are on a Dynamic IP range and your users are trying to send emails to users @aol.com http://postmaster.info.aol.com/ Darcy Hi all,

Re: [vchkpw] vpopmail 5.3.25 and 5.3.26 released

2003-08-28 Thread Darcy Dueck
I'm not sure if this is a biggy, but after I installed the latest vpopmail, after trying to install vqadmin, it complained about some files missing: configure: error: No vpopmail etc/lib_deps file. Upgrade to vpopmail-4.9.8 or above Going into my old vpopmail etc dir from 5.2.1, i have these

Re: [vchkpw] Some help needed [Off-topic]

2003-08-28 Thread John Simpson
On Thursday, Aug 28, 2003, at 13:46 US/Eastern, Darcy Dueck wrote: I know AOL has implemented some blacklists of mail servers originating from Dynamic IP address blocks, so that could be a problem if it thinks you or your ISP are on a Dynamic IP range and your users are trying to send emails to

Re: [vchkpw] Some help needed [Off-topic]

2003-08-28 Thread Darcy Dueck
Right, when I had this problem before, all I did was add the following line to my /var/qmail/control/smtproutes file: :ip.address.of.my.isp's.smtp.server qmailctl restart and then you should be good Darcy On Thursday, Aug 28, 2003, at 13:46 US/Eastern, Darcy Dueck wrote: I know AOL has

[vchkpw] Not_allowed_to_perform_deliveries_as_root./

2003-08-28 Thread Tobias
Hi! I´ve got this error now in my qmail/send/current so mail gets stuck in queue @40003f4e5086262abaa4 delivery 1: deferral: Not_allowed_to_perform_deliveries_as_root./ So i wonder where could it possible be wrong ? I have checked the permissions but i found nothing strange. The qmail-send

[vchkpw] Re: [qmailadmin] Problems Compiling Qmailadmin

2003-08-28 Thread Tom Collins
On Thursday, August 28, 2003, at 04:58 AM, [EMAIL PROTECTED] wrote: I then tried to specify the location of vpopmail (which is in the default /home/vpopmail) and got the folowing errors with configure: cat: /home/vpopmail/etc/inc_deps: No such file or directory cat:

RE: [vchkpw] Not_allowed_to_perform_deliveries_as_root./

2003-08-28 Thread Shane Chrisp
Its trying to run qmail-send as root. Check your permissions in your startup scripts. qmail-send should be running as qmails I believe and owned root.qmail. You could just run qmail setup check again to make sure the binaries are installed with the right permissions. Shane -Original

[vchkpw] warning: trouble injecting bounce message, will try later

2003-08-28 Thread Jesus Ruiz
i'm using qmail with vpopmail 5.2.1, and in my qmail log files this message continues to appear warning: trouble injecting bounce message, will try later I have plenty of disk space, and i don't know where to look for the problem. Thanks in advance, Jesus

Re: [vchkpw] Problem with latest release of vpopmail 5.3.26a

2003-08-28 Thread Tom Collins
On Thursday, August 28, 2003, at 08:27 AM, Tobias wrote: I´v got a problem with the latest release of vpopmail 5.3.26a. I´m running the mysql setup and everything wen´t well during install. But when i try to login with pop3 it rejects my password and i get a -ERR authentication failed. In the

Re: [vchkpw] Not_allowed_to_perform_deliveries_as_root./

2003-08-28 Thread Tobias
-clean So could it be vpopmail that makes this error ? //Tobias __ NOD32 1.496 (20030828) Information __ This message was checked by NOD32 Antivirus System. http://www.nod32.com

Re: [vchkpw] Problem with latest release of vpopmail 5.3.26a

2003-08-28 Thread Tom Collins
On Thursday, August 28, 2003, at 08:27 AM, Tobias wrote: I´v got a problem with the latest release of vpopmail 5.3.26a. I´m running the mysql setup and everything wen´t well during install. But when i try to login with pop3 it rejects my password and i get a -ERR authentication failed. What are

Re: [vchkpw] Problem with latest release of vpopmail 5.3.26a

2003-08-28 Thread Tobias
-held Network Tester __ NOD32 1.496 (20030828) Information __ This message was checked by NOD32 Antivirus System. http://www.nod32.com

Re: [vchkpw] Problem with latest release of vpopmail 5.3.26a

2003-08-28 Thread Tobias
for your POP3 server? Courier? Qmail? What user is the POP3 server running as? -- Tom Collins [EMAIL PROTECTED] http://sniffter.com/ - info on the Sniffter hand-held Network Tester __ NOD32 1.496 (20030828) Information __ This message was checked by NOD32 Antivirus System. http

Re: [vchkpw] Problem with latest release of vpopmail 5.3.26a

2003-08-28 Thread Tom Collins
On Thursday, August 28, 2003, at 12:43 PM, Tobias wrote: I solved it with setting the permissions for the domains in the assign file to vpopmail:vchkpw and not 89:89 as it was before but after that i got a problem saying Not_allowed_to_perform_deliveries_as_root./ What is the output of `id

Re: [vchkpw] Problem with latest release of vpopmail 5.3.26a

2003-08-28 Thread Tobias
the version history of vpopmail on it? When did you create the domains? -- Tom Collins [EMAIL PROTECTED] http://sniffter.com/ - info on the Sniffter hand-held Network Tester __ NOD32 1.496 (20030828) Information __ This message was checked by NOD32 Antivirus System

[vchkpw] courier pop3d instead of qmail-pop3d

2003-08-28 Thread Tobias
Is it possible to run courier pop3d instead of qmail ? How can i set it up in the run script for qmail-pop3d ? //Tobias

Re: [vchkpw] Problem with latest release of vpopmail 5.3.26a

2003-08-28 Thread Tobias
PROTECTED] http://sniffter.com/ - info on the Sniffter hand-held Network Tester __ NOD32 1.496 (20030828) Information __ This message was checked by NOD32 Antivirus System. http://www.nod32.com -- Tom Collins [EMAIL PROTECTED] http://sniffter.com/ - info on the Sniffter hand

Re: [vchkpw] courier pop3d instead of qmail-pop3d

2003-08-28 Thread Tom Collins
On Thursday, August 28, 2003, at 01:08 PM, Tobias wrote: Is it possible to run courier pop3d instead of qmail ? How can i set it up in the run script for qmail-pop3d ? Yes it is possible, and many people do it. Please refer to one of the excellent toaster documents out there on installing all

Re: [vchkpw] Not_allowed_to_perform_deliveries_as_root./

2003-08-28 Thread Jonas Pasche
Hi, Ive got this error now in my qmail/send/current so mail gets stuck in queue @40003f4e5086262abaa4 delivery 1: deferral: Not_allowed_to_perform_deliveries_as_root./ Please show the _full_ log for that delivery try (including the target user address). Jonas

Re: [vchkpw] warning: trouble injecting bounce message, will trylater

2003-08-28 Thread Jonas Pasche
Hi Jesus, warning: trouble injecting bounce message, will try later - Wrong permissions on qmail-queue? - qmail partition mounted nosuid? - Resource limits too low? - Queue corrupt? In general, this doesn't seem to be vpopmail-related; please consult the qmail list for further assistance.

Re: [vchkpw] Entourage for Mac/Qmail Error

2003-08-28 Thread Jonas Pasche
Hi Adam, Now he gets the error: Mail error. The server is busy. Suggestions? Insert recordio into your qmail-smtpd run script and see what the client actually sends to the server, and what happens. If nothing shows up in the log, use tcpdump or any equivalent low-level debugger to find out

Re: [vchkpw] /etc/shadows -

2003-08-28 Thread Jonas Pasche
Hi José, How can i convert /etc/shadow to a vpasswd file type.?? Use a shell script like... #!/bin/sh for U in `awk -F : '{ print $1 }' /etc/passwd` ; do echo -n $U - /home/vpopmail/bin/vadduser -r [EMAIL PROTECTED] done This won't convert the passwords; however, as most users

RE: [vchkpw] Can not get vpopmail to enable roaming support

2003-08-28 Thread Jonas Pasche
Hi Raymond, I didn't change the tcp.cmtp to tcp.smtp.cdb. I simple link my /etc/tcp.smtp to ~vpopmail/etc/tcp.smtp and made the file 777 so any program can write to it. You simply try fiddling around, ending up with world-writable files and symlinks. Hey, this is Unix, stop acting helpless.

Re: [vchkpw] Some help needed [Off-topic]

2003-08-28 Thread Jonas Pasche
Hi Tanmaya, Below is out of ps command on our mail server. Can anyone help me figureout is this any malacious attempt. The processlist doesn't tell us. 1) You have logs; look into them. If you don't understand them, show them to us. 2) Look into the message files

[vchkpw] domain limits not applying to users

2003-08-28 Thread Tom Collins
On Thursday, August 28, 2003, at 07:47 AM, Steven Job wrote: I am able to set the qmailadmin limits (using the mysql version) but it doesn't seem to work the way I thought. I have set the disable_pop to 1 and the disable_webmail to 1 and the disable_relay to 1 and I don't see any difference in