sure.
Has anyone had similar problems? Any suggestions much appreciated.
- Jonathan
My suggestion would be to run it. You may find that after you run it, it
is running.
If that fails, please provide slightly more information about your
problem, my psychic powers must be dwindling.
:)
Jonathan.
Dear all,
My qmail send service is no trunning.
Help!!!
Manish Jain
(Network
Hi,
When i try to vdeluser i get
Failed to delete user from auth backend
Error: Illegal username
and when i try to vdeldomain i get
Warning: Failed while attempting to delete domain from auth backend
However, both the user and the domain seem to be removed, and can be
readded without
username
# vdeldomain test.domain
Warning: Failed while attempting to delete domain from auth backend
16 maj 2007 kl. 00.51 skrev Remo Mattei:
you need to use the [EMAIL PROTECTED] otherwise it fails unless the user
is part of
the default domain.
Remo
Jonathan wrote:
Hi,
When i try
That's the strange thing. They're both removed from the vpopmail
directory and the MySQL db.
16 maj 2007 kl. 02.32 skrev Remo Mattei:
Jonathan wrote:
This is the exact procedure:
# vadddomain test.domain
Please enter password for postmaster:
enter password again:
# vadduser [EMAIL
Hi,
I recently upgraded my server hardware and upgraded vpopmail as well,
and decided to use mysql instead of cdb which my current system uses.
I read in README.MySQL that it's possible to convert cdb to mysql
using the vconvert program.
I copied one of the old domains to the new
will break the ownerships anyways.
I'm running this on FreeBSD 4.3-STABLE, the qmail install is vanilla
apart from changing conf-split to 79.
Anyone got any ideas? I'm flummoxed.
TIA,
Jonathan
I just installed vpopmail and when I try to run
'/home/vpopmail/bin/vadddomain myvirtualdomain.com', I get the
message:
Error: Unable to chdir to
vpopmail/domains/domain directory
Sounds like a permissions issue to me, but I think
all of my permissions are correct. I haven't changed any
This is the line I used to configure
./configure --enable-roaming-users=y --enable-vpopuser=vpopmail --enable-ip-
alias-domains=y
- Original Message -
From: Bill Shupp [EMAIL PROTECTED]
To: Jonathan Edwards [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, June 25, 2001 2:31 PM
-
From: Bill Shupp [EMAIL PROTECTED]
To: Jonathan Edwards [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, June 25, 2001 2:38 PM
Subject: Re: unable to 'adddomain'
Quoting Jonathan Edwards [EMAIL PROTECTED]:
This is the line I used to configure
./configure --enable-roaming-users=y
Anyone know of a web site that has an archive of the vchkpw mailing list?
thanks
Jon
I installed vpopmail for the first time and found everything to be working
correctly, but realized that I wanted it installed at a different place on
our server so I simply reinstalled it to the new location. However, now it
does not work. When I try to 'vadddomain', I get: 'Error: Unable to
-install.
Jon
- Original Message -
From: Ken Jones [EMAIL PROTECTED]
To: Jonathan Edwards [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, June 26, 2001 7:56 AM
Subject: Re: uninstalling vpopmail
Jonathan Edwards wrote:
I installed vpopmail for the first time and found everything
found the answer to my question.
In case anyone wants to know, this works:
make distclean
./configure [options]
make
make install-strip
- Original Message -
From: Juergen Hoffmann [EMAIL PROTECTED]
To: Jonathan Edwards [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, June 26
I'm running qmail 1.03, vpopmail-4.9.10,
daemontools-0.70, and qmailadmin-0.45. I've got several virtual domains set up.
A strange thing just happened. After completely restarting the server, one of
the domains stopped receiving e-mail, both local and remote. After looking
through the logs,
Hi,
I was hoping if someone could help me with a problem I've been having...
vpopmail doesn't deliver mail to any users. Its odd, but I have been
looking at manuals and postings for a while, and I don't see anything
like this happening anywhere. Simply put, the mail all gets put into the
Yes I did. It still doesn't work... I feel like this is an unusual problem?
Jon
Remo Mattei wrote:
Did you try to login with the full email address?
Remo Mattei
Network Security Engineer
cell 801-209-8554
email [EMAIL PROTECTED]
-Original Message-
From: Jonathan Ludwig [mailto
ideas? Thanks!
Jon
Peter Palmreuther wrote:
Hello Jonathan,
On Sunday, March 30, 2003 at 9:53:47 AM you wrote (at least in part):
vpopmail doesn't deliver mail to any users.
Why are you assuming vpopmail doesn't deliver the mails? Your further
text says it does.
Its odd, but I have been
any idea why this would happen? Thanks!
Jonathan
it
seemed to run on a timeout basis.
Also, does anyone have an example of the sql table structure needed?
Thanks,
Jonathan
Hi,
Is it possible to get vpopmail courierIMAP to auth from the same MySQL
database?
Yes, simply compile courier-imap with --with-authvchkpw to enable to
auth against vpopmail.
Cheers,
Jonathan
(); */
! } else if(!flagdeny) {
!env(RELAYCLIENT,);
! }
! flagdeny=0;
! }
So if you wanted any other ENV variables set you could just add them
there under env(RELAYCLIENT,); . right?
Cheers,
Jonathan
maildir to deliver to
VHOME=`/home/vpopmail/bin/vuserinfo -d [EMAIL PROTECTED]
# If it wasn't a valid user... set user to postmaster
if ($RETURNCODE != 0)
{
EXT=postmaster
}
That would probably do what you are after.
Cheers,
Jonathan
|
+---+-++
| dog | cat.net | [EMAIL PROTECTED] |
+---+-++
Is this a bug or am I missing something?
Cheers,
Jonathan
bounce details
to $VPOP
}
}
I'll have a play around and try to get this working tomorrow.
This does seem odd to me though.., none of the maildrop scripts I have
seen seem to deal with aliases!
Thanks,
Jonathan
will fall back on plain or login if it fails MD5 I
wouldn't have thought so but you never know.
Anyone else been able to use CRAM-MD5 with vpopmail?
Cheers,
Jonathan
make
causes configure to be run twice is this intentional?
Cheers,
Jonathan
sophisticated templates can also be produced, see the
WARNING: documentation.
Cheers,
Jonathan
or b)
vmoddomlimits creates one if necessary.
Thanks,
Jonathan
to read them via
vmoddomlimits.
I also noticed that the mysql table limits has no entries when i add a
domain via e.g. qmailadmin.
looks like a bug! :-)
Cheers,
Jonathan
. Didn't Include my database user info in vmysql.h.
Hope this helps.
Jonathan Shaw
I didn't have any problem, BUT I have noticed a LOT of messages about this.
In BOLD letters to say:
You MUST recompile qmailadmin, etc. in order for those programs to
recognize the newer version of vpopmail.
-Jonathan Shaw
Tom Collins writes:
We need a good README file to include
.
-Jonathan
.
Thanks,
Jonathan
--
Jonathan Viney
Bluewire Solutions
Position: Partner, Systems Admin
Contact: 021 039 7515
Website: www.bluewire.net.nz
Email: [EMAIL PROTECTED]
ended up doing and it resolved
the problem. You're right, I didn't really see anything documented
either.
Tom, possibly something could be added to the docs somewhere, or
vadddomain could produce a more helpful error message.
Cheers,
Jonathan
On Fri, 2004-05-07 at 13:16 +0200, Alejandro Alfonso wrote:
XFS don't seem to be the problem. Most of my mail servers
works with XFS, over IDE, SCSI and even RAID by sofware.
I agree, I've been using XFS with vpopmail for a while now and haven't
had any problems.
Jonathan
Hi all,
Can someone tell me how I can generate a password which could be used in
the pw_passwd field in MySQL?
If possible, I'd like MySQL to generate the password, can anyone give me
some pointers?
Cheers,
Jonathan
Thanks for the replies (Michael and David). Very helpful.
Cheers,
Jonathan
Michael Bowe wrote:
- Original Message -
From: Jonathan Viney [EMAIL PROTECTED]
Hi all,
Can someone tell me how I can generate a password which could be used in
the pw_passwd field in MySQL?
If possible
think it is possible. I would love it if someone who knows would
explain it...
I recently converted from cdb to mysql. I just used the vconvert program
and it just converted it.
vconvert -c -m
Works like a charm for me.
-Jonathan
It is my understanding that |0| is the port number for the mysql server.
Is it possible that this port number is different in this/my design?
If you have a default MySQL setup, the port SHOULD be 3306.
-Jonathan
Hello,
We are having a very strange problem with our qmail + vpopmail
installation; I'm hoping someone on this list can enlighten me as to
the problem.
First of all, this is a production system which has been happily
working for over a year. Authed POP users of arbitrary domains are
added to
to handle that. There has been some work
on a vpopmail daemon (vpopmaild) with a php interface, that would delete a
user just as if you did it via the command-line utilities.
Thanks in advance.
-np
Jonathan Shaw
[EMAIL PROTECTED]
[ISO-8859-1] nathana writes:
No, it doesn't work...
I have recreated the domain from scratch, but the pop server dont
recognize my password: -ERR authorization failed
Check your run file, look for something like /home/vpopmail/bin/vchkpw
-Jonathan
Has anyone gotten the chkuser 2.0 patch to work with gentoo ebuild?
-Jonathan
[EMAIL PROTECTED]
you tried replacing the back passenger side tire?
If that doesn't fix it, my guess is you're out of headlight fluid.
NO, NO, NO.. You all have it wrong.
You need to replace the OLD air in your tires with new air.
-Jonathan
[EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] wrote:
Jon wrote:
Sorry about the top posts
No problem
Dec 7 01:01 rsa512.pem
Where do I look to find the configure options?
cd /var/src/vpopmail/5.4.12 (or where ever your vpopmail source code is
that you compiled it from)
less config.log
I have created a user registration script to create a new email account.
The script is written in perl and call vadduser, I have added a sudo entry
to allow the webserver user to execute vadduser as root. The script has
worked well for sometime but now receives the following error. This error
/RPM/SPECS/package.spec
Edit configure section of the spec file to disable domain quotas
rpmbuild -bb --with fdr30 /usr/src/RPM/SPECS/package.spec
The spec file will may not be at the exact location as above but will be
somewhere within /usr/src.
-
Jonathan
such a
script exisst somewhere, or do i need to make my own? If i need to make
my own, where can i find specifications on the file format?
/Jonathan
Hi,
I've been trying to enable SMTP auth using vchkpw with qmail today.
The login works fine, but after i issue the rcpt to command over
telnet, I get the 421 unable to read controls (#4.3.0) error.
Google told me it' s a permissions problem, but the permissions on
the /var/qmail/control
Doh, I don't use a patch at all. I use debian packages from http://
debian.iuculano.it/
Perhaps i could modify the source with that patch. Seems I need to
patch either way.
15 aug 2007 kl. 18.41 skrev Rick Macdougall:
Jonathan Selander wrote:
Hi,
I've been trying to enable SMTP auth
Hi there,
I've set up SMTP AUTH and AUTH LOGIN works without problems, however
when i try to login with mozilla thunderbird (which as far as i know
uses CRAM-MD5), the login fails with the error message:
Aug 28 14:39:30 mail vpopmail[16420]: vchkpw-smtp: password fail (pass:
'[EMAIL
Hi,
I just made maildrop sort spam to a Spam folder for my own user and
I'd like the same functionality for all my domains. Is it possible to
have a global .qmail file or such? Or simply use maildrop instead of
vdelivermail (or whatever it's called)?
Thanks
!DSPAM:477fde3d310548088720428!
unsubscribe
!DSPAM:4786992b310541869418940!
Hi,
I run maildrop to sort spam into a special folder, but for some
reason, it doesn't take the domain/user/.qmail file into account for
autorespond etc. Perhaps vdelivermail requires an environment variable
which i could import? Does anyone know which one if so?
This is my (somewhat
)
libc.so.6 = /lib/tls/libc.so.6 (0xb7e33000)
/lib/ld-linux.so.2 (0x8000)
for now i help me with copying the old vchkpw from .17 into the bin dir. But i
don't think this is a
good idea
ok, now i'm done ;-))
regards Jonathan
!DSPAM:4aa5691e32711074972397!
, and I'd like to resolve this for 5.4.29.
Is it possible
for you to contact me off-list and give me access to this system so I can
debug this particular
problem?
unfortunately not, as this is a productive server, but i will help you where i
can
regards Jonathan
!DSPAM:4aa69eb832714889646320!
for this sort
of behaviour?
Thanks,
Jonathan Smith
Jonathan J. Smith wrote:
I have had a system running for most of a year without any issues.
Recently something has occured to case sqwebmail to NOT successfully
validate any users. vpopmail is still working and POP passwords
validate
fine through it.
Has anyone run across this who
59 matches
Mail list logo
