user home directories.
Assume the actual domain is test.com, the virtual domain is test.com,
system users are SystemA, SystemB, etc., and virtual users are VirtualA,
VirtualB, etc., just for ease of reference.
Is what I want doable, or is everyone getting a good laugh? :)
thanks,
mark
e paths at configure and compile time, so they
were right. Whatever permissions the installation process granted were
the ones in effect.
What am I missing?
Is there a way to make vpopmail produce more logs than it does (which is
practically none) ?
thanks,
mark
ure and compile time, so they
were right. Whatever permissions the installation process granted were
the ones in effect.
What am I missing?
Is there a way to make vpopmail produce more logs than it does (which is
practically none) ?
thanks,
mark
Hi Mark,
Could you point
host vpopmail[pid]: password field empty
Checking ~vpopmail/domains/domain.com/vpassword confirms this, with the
entry shown earlier.
Please tell me (truthfully ;) that I'm missing something simple, so I can
feel stupid for a little while but have this working in the end.
Any ideas?
thanks,
mark
there) -- it'll create in ~vpopmail/users, but you then cannot delete it
or authenticate using it.
Well anyway, thanks for the pointers. Now I know how better to refine my
search.
By any chance does anyone have vpopmail working on a Slack 7.1 install?
thanks,
mark
the fields from
/etc/shadow into domain.com/vpasswd.
If this is not consistent with vpopmail on other platforms (ie: it uses
system crypt(), be it md5 or des, but mine is weird), thats cool too :)
Gives me more to look at :)
thanks,
mark
to building the server where I need to use it, I'll post how to do
it (if I can remember *sigh*)
mark
--enable-default-domain=domain.com was all
I needed, since I didn't want to have roaming stmp users.
any other info you can supply?
mark
high volume (and also to save asking a question that was answered
multiple times already, but not documented).
mark
to create the virtual accounts by using 'vadduser
[EMAIL PROTECTED]' though; the default domain is only for user
authentication purposes.
mark
arted over, things went well.
Just one possibility,
mark
rchive wouldn't work, but again I'm not sure.
good luck,
mark
values from the open() calls is a good
thing: a successful open() returns a file descriptor. If you saw -1 being
returned, that would be a bad thing.
mark
-* libraries which are not installed by default on a
server install.
Mark
On 16 Jul 2001 15:52:53 +0800, Levin Lee wrote:
hi everyone and ken,
vpopmail-4.10.29 could not be compiled in redhat 7.1 with
gcc-2.96-85, please help me to check the error messages listed
below, thank you very much
IMP for the Horde works great for me,
http://www.horde.org/imp/
Mark
On 01 Aug 2001 18:17:11 +0700, Adhitiyo K wrote:
hello again folks
what webmail base on php and use pop3 can use with vpopmail and subdomain
TIA
.tio
I believe that Ken in a earlier post said that vconvert is disabled for
now.
Mark
On 03 Aug 2001 22:12:39 +0200, J.M.Roth wrote:
hi,
I tried installing 4.10.30 with mysql authorization which seems to have worked
alright but the vconvert util is dead
It doesn't output a thing. Neither does
Has anyone installed a 3rd party ezmlm manager
and got it to work with vpopmail?
I am trying to get ezweb to work with vpopmail.
No luck tho.
Any help would be appreciated.
-Mark
I'm trying to configure vpopmail to create a single vpopmail table in mysql.
I installed 5.4.10 version and whatever I'm trying to do, it is still creates a
individual table per domain.
config.h has MANY_DOMAINS 1 setup.
Any advice?
Thanks, I will try.
Quoting Tom Collins [EMAIL PROTECTED]:
On May 11, 2005, at 8:18 AM, [EMAIL PROTECTED] wrote:
I'm trying to configure vpopmail to create a single vpopmail table in
mysql.
I installed 5.4.10 version and whatever I'm trying to do, it is still
creates a
individual
Tom,1 more question.
I remember that I removed vpopmail/bin and vpopmail/include directories and
then tried to configure again with no difference.
make distclean does something else?
Thanks
Mark
Quoting Tom Collins [EMAIL PROTECTED]:
On May 11, 2005, at 8:18 AM, [EMAIL PROTECTED] wrote
Thanks for confirming that.
I was able to create a single vpopmail table running make distclean first.
(Thanks to Tom Collins response).
After that my qmailadmin stopped authenticating as well as imp, even the user
was there and password was correct and all services were up. I rolled back to
the
Thanks for the note. I was able to change vpopmail.php in passwd module to
allow passwords change in the one table per domain configuration. I will
continue using it.
Quoting Tom Collins [EMAIL PROTECTED]:
On May 12, 2005, at 12:13 PM, [EMAIL PROTECTED] wrote:
Thanks for confirming that.
I
Dear all,
When trying to login using squirrelmail I get the
below mentioned error;
Unknown user or password incorrect.
This happens for one user only others can login
without any problems. Also, when I append the domain
name along with the userid the user is able to log in.
Please let me kow why
--- Quey [EMAIL PROTECTED] wrote:
Mark wrote:
Dear all,
When trying to login using squirrelmail I get the
below mentioned error;
Unknown user or password incorrect.
This happens for one user only others can login
without any problems. Also, when I append the
domain
name along
Did that as well. No change. This is happening only
for one particulat user thats why it is so wierd.
--- Kenny Lee [EMAIL PROTECTED] wrote:
backup your user's mailbox, delete the userID and
recreate again.
- Original Message -
From: Mark [EMAIL PROTECTED]
To: vchkpw@inter7
No wierd chars in username very much a english name.
--- Shane Chrisp [EMAIL PROTECTED] wrote:
On Sun, 2007-11-04 at 21:01 -0800, Mark wrote:
Does the username have any wierd characters in it?
Did that as well. No change. This is happening
only
for one particulat user thats why
--- Quey [EMAIL PROTECTED] wrote:
Quey wrote:
Kenny Lee wrote:
backup your user's mailbox, delete the userID and
recreate again.
- Original Message - From: Mark
[EMAIL PROTECTED]
To: vchkpw@inter7.com
Sent: Monday, November 05, 2007 12:40 PM
Subject: Re: [vchkpw
Dear all,
Kindly provide some pointers on how to make the smtp
only servers on DMZ forward mails to internal server
which is a toaster. How will client check the webmail
?
In my head, I will first have around 2- 3 servers in a
round robin fashion which will receive all mails for
our domain based
I'd rather not have a postmaster account for each virtual domain, but
instead forward all of them to a single mailbox. I would however like to be
able to to qmailadmin to administrate my domains. How can I have the best of
both worlds?
Mark
EMAIL PROTECTED]]
Sent: Tuesday, August 22, 2000 7:11 AM
To: Mark Chesney
Subject: Re: postmaster account
Hello Mark,
Tuesday, August 22, 2000, 2:50:23 PM, you wrote:
I'd rather not have a postmaster account for each virtual domain,
The existence of postmaster@
for freebsd edit /etc/rc.conf and add:
ldconfig_paths="$ldconfig_paths (additional paths)"
for example:
ldconfig_paths="$ldconfig_paths /usr/local/lib/mysql"
-Original Message-
From: Dan Fairs [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 24, 2000 7:58 AM
To: Ken Jones
Cc: [EMAIL
On Fri, Aug 25, 2000 at 09:05:50AM -0700, Mark Chesney wrote:
currently, in order to avoid the %domain pop user naming scheme, the only
choice is ip aliasing, which requires an ip for each and every domain.
sometimes this is unrealistic or unachievable. why not create a system
where
pop usernames
vadduser modifies /var/qmail/users/assign and /var/qmail/users/cdb, which
requires root privleges.
-Original Message-
From: Zealous One [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 30, 2000 4:56 AM
To: [EMAIL PROTECTED]
Subject: RE: add user problem. urgent!
I've found that
l/bin"
\tcpserver 0 pop-3 /var/qmail/bin/qmail-popup orbital.inter7.com
\/home/vpopmail/bin/vchkpw /var/qmail/bin/qmail-pop3d Maildir
in where should i place the above startup
scripts
Thank you
Mark
Hi,
How to enable password checking
under vpopmail via pop3. Do i need the checkpasswod
packages.??
Thanks
Mark
with vpopmail,
is that true ?? if yes, what other althernatives should i use.
In additions, do i really need a virus scanner for mail server !! Since
people can instore the virus program under their own machine. Please tell
me about that. Thank you so much.
Thank you,
Mark
before they can get
to the end user. Run it on all server. Especially the mail server!
Mark
Mark Lo wrote:
Hi,
Does anyone have any success story to use vpopmail + qmail +
qmail-scanner + any commercial virus scanner ?? I have checked the site for
qmail-scanner, it requires certain
Where do I adjust my config to make sure this variable is passed to
vcheckpw?
My tcprules smtp open-relay is not operational because vcheckpw is
getting a TCPREMOTEIP = null.
Thanks for a great set of programs.
Markt
Thanks Ken.
That was it.
There's a box of Tim Tams here ready for you to pick up any time!
Regards, MarkT
Ken Jones wrote:
TCPREMOTEIP is set by tcpserver.
Are you running your qmail-pop3d service with tcpserver?
Ken Jones
Hi,
I would like to know the location and name of pop logging file. I have
used "--enable-logging=y" in my configure script, but I know the location of
the files.
Thank you
Mark
the
./home/vpopmail./domains/domains/ and in my .qmail-default, i have the
following line "| /home/vpopmail/bin/vdelivermail '' bounce-no-mailbox".
But, the message never bounce back to the sender. Please tell me how to
bounce the message back to the sender if there is no pop account match.??
Thank you
Mark
Hi,
I have installed vpopmail alfready, but now I want to pick some new
features. So what do i have to do before re-install vpopmail.
Thank you
Mark
Bill Shupp wrote:
I just used vadduser to create a username containing "." successfully. What
test lead you to suspect it's not?
I've attempted to create working accounts, but my attempts result in the
Maildir being created, but no corresponding .qmail file.
Errkkk I've just done
Bill Shupp wrote:
is appearing to follow the .qmail-default delivery path as for any new pop
account, .qmail files are not being created.
Hmmm
Any hints?
What's in your .qmail-default file for the domain in question? It should be
something like:
|
I installed vpopmail with mysql support and qmailadminno problems works good. Now I want to get sqwebmail 1.2.1 running, but have problem around the authlib part. I even tried sqwebmail 1.1.2 both with same results. I run: ./configure --with-htmllibdir=/usr/local/share/sqwebmail
MySQL-3.23.30-1.i386.rpm, is the server. I also have the clients installed as well as the mentioned development libraries.- Original Message - From:Aaron Carr Sent:Tuesday, January 16, 2001 9:18 PM To:Mark Steller Subject:RE: sqwebmail (vpopmail 4.9.7+mysql) compile fails I don't
and it should work. I edit this variable because it is included in the areas needed. I did the samething with Courier-IMAP to get it to compile also. Hope this helps Mark - Original Message - From:Sebastian Grewing Sent:Saturday, January 20, 2001 10:45 AM To:Mark Steller Subject:RE
Faster way without editing files. Just run your configure like this: env LIBS="-L/usr/lib/mysql -lmysqlclient -lz" ./configure [your options] Of course you'll need to substitue your mysql libs directory if not /usr/lib/mysql. I forgot about doing it like that. Mark - Origin
ng to note is that
qmail-smtpd must run with permissions to see the /home/vpopmail file system
Hope this helps
Mark
-Original Message-
From: Alberto Rodrguez [mailto:[EMAIL PROTECTED]]
Sent: 24 January 2001 19:38
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: vpopmail and qmail-
unsubscribe - remove
Regards,Mark O'DellTechnical Services Team Leader
Connect Support Services
Ltd.The Fifth FloorSouth Quay Plaza II183 Marsh
WallLondonE14 9SH
Web site:
http://www.connect.co.uk
Email:
helpdesk@connect.co.uk
Have you tried compiling with a conifgure line like this: env LIBS="-L/usr/lib/mysql -lmysqlclient -lz" ./configure --your-options-here Just replace -L/usr/lib/mysql with the location of your mysql libs. That should take care of the problem below. Mark - Original Message -
Postmaster writes:
Mark,
I do have to login as @domain.com, so I guess the domain name wasn't
configured at compile. Is this a delivery or retrieval problem? If it's
pop3 authentication, no users have complained so far. On the other hand,
users are suspicious that not all their mail
See www.stunnel.org. It tells you how to setup SSL wrapping with pop
servers.
- Original Message -
From: Dave Ellsworth [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, May 04, 2001 10:44 PM
Subject: RE: SSL
well I guess what I more of meant to ask was and left out is how can I
systems so if one goes down the other can still access
your raid.
Mark
- Original Message -
From: Gabriel Ambuehl [EMAIL PROTECTED]
To: Eduardo Augusto Alvarenga [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Saturday, May 05, 2001 10:06 AM
Subject: Re[2]: POP3 Cluster
-BEGIN PGP SIGNED
Does anyone know what headers are used for delivery, and for read receipts?
Microsoft outlook uses this for a read receipt request.
Disposition-Notification-To: Someone [EMAIL PROTECTED]
= mysql_connect (host, user, password))) then
connection=mysql_connection (host2, user, password);
Of Course this will require rewriting the mysql login section of vchkpw.
Mark
- Original Message -
From: Jeffrey Iskandar Ahmad [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, May 29, 2001 7
Forgive my ignorance,
What is the latest version of Courier-Imap to use with vpopmail 4.9.10?
Mark
Ken Jones wrote:
The latest versions of courier-imap and sqwebmail require
the latest vpopmail 4.10 development version.
Ken Jones
On 15 Aug 2001 18:01:25 +0200, Arne Hueggenberg wrote
No there is no reason you can't run 2 tcpservers on different ports I run four
with differnet combos of RBL and Antivirus scanning.
Mark
Qmail wrote:
Is there any reason not to run two with seperate IPs on the same server. I'm
running
This way we could easly allow domainholders to choose
a unique index (domain) syntax which isn't
supported in the 3.22 releases. Thanks to Chris Scheller for
tracking this down.
Mark
Leonard Cooper wrote:
Please excuse the terrible use of the engilsh language in my last mail, but
it is 4am on a Sunday (Monday??!!) after a LONG weekend behind
Have you confirmed the '/usr/local/bin' is in your PATH.
Type 'set' and see if it is. If not add it.
Mark
s chaterje wrote:
Hi All,
While i am configuring qmailadmin it's showing this
log.
creating cache ./config.cache
checking for a BSD compatible install...
./install-sh -c
Try,
http://inter7.com/qmailmrtg7/
Mark
Bill Shupp wrote:
On Tuesday, November 27, 2001, at 03:26 PM, Che Stevens wrote:
Anyone seen a script for stripping the /var/log/maillog where everythin
is logged for qmail and vpopmail and formating it into an html page
showing traffic for each
Sorry, can't help you on this one.
Haven't actually set this up myself yet. Been planning it for a while now
Having a quick read of the FAQ on the page shows shows some sample startup
scripts...
Try using them as a starting point.
Mark
Che Stevens wrote:
Thanks
This shows to log pop3
Make sure your ~vpopmail/lib directory and files is readable by the user
you are compiling courier as. By default the vpopmail libraries are
only readable by root.
Mark
Matteo Ridolfi wrote:
I installed vpopmail 5.3.9 with ldap support withouth problems.
Now I want to install courier-imap
help will be
greatly
appreciated.Regards,Mark
!
--
* Mark Nicholas
* [EMAIL PROTECTED]
* SUSe Linux 8.0
using vpopmail version 5.0 I believe (where to check this?)
I am NOT well educated on this stuff yet, but learning.
any thoughts or direction?
thanks!
--
* Mark Nicholas
* [EMAIL PROTECTED]
* SUSe Linux 8.0
Hi
I have installed VPopMail (5.2.1). The system
is running on redHat 7.3. I have install VMailMgr and then removed
it. if I do:
chris real unix user
telnet 0 110
+OK [EMAIL PROTECTED]
user chris
+OK
pass xxx
-ERR authorization failed
Connection closed to foreign host
if I do:
info virtual
, January 09, 2003 11:30 AM
Subject: Re: [vchkpw] Installation
Hi David,
On Thu, 9 Jan 2003 09:40:36 -
David Mark [EMAIL PROTECTED] wrote:
-ERR aack, child crashed
Please post the command(s) that start your POP3 daemon.
It's either an 'inetd' line or a script invoking 'tcpserver
Hi
Thanks now more of it is working. A virtual user works ok. I still get the
same error with a real user:
chris real unix user
telnet 0 110
+OK [EMAIL PROTECTED]
user chris
+OK
pass xxx
-ERR authorization failed
Connection closed to foreign host
Chris
From: Claudio Nieder [EMAIL PROTECTED]
to actually help is.
But then, I suppose you could be one of those (few) people who has never
asked the wrong question in the wrong place.
(Yeah, I jumped at the bait, silly me. G)
--
RAM disk is not an installation procedure.
***
* Mark Nicholas
* MCSE MCP +I
* Lawton Bros
] Session finished for user vpopmail, service su
One man with courage makes it a majority.
- Andrew Jackson
***
* Mark Nicholas
* MCSE MCP +I
* Lawton Bros., Inc
* [EMAIL PROTECTED]
***
not found error and my log files show any other
user but qmaild as vpopmail@ or spamd@.
Thanks
Mark
PROTECTED]:$
If it succeeds or fails it should log to /var/log/mail or the like,
check your log dir.
Mark
[EMAIL PROTECTED] wrote:
Hello again, by bad day continues and now its time for question 2.
I have vpopmail working with qmail-pop3 daemon
I have a problem logging on to the pop3
4 drwxr-xr-x2 vpopmail vchkpw 4096 Jun 27 18:23 include
4 drwx--2 root root 4096 Jun 27 18:23 lib
[EMAIL PROTECTED]:/opt/vpopmail$
--
Mark Persohn
CPS Systems Pty Ltd
PH 02 9909 3022
MOB 0413 670676
email: [EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
Hello all
the
pw_clear_passwd portion of the database table and therefore the converted
domain does not work.
Any ideas?
Thanks
Mark
+ passwords and entering them in all manually.
-Original Message-
From: Mark Spieth [mailto:[EMAIL PROTECTED]
Sent: Saturday, September 27, 2003 8:17 AM
To: [EMAIL PROTECTED]
Subject: [vchkpw] Converting Large Sites from CDB to MySQL
I am converting an existing qmail/vpopmail site using cdb
Ryan,
I have it working with IMP 3.2.1
I had to get an updated version of vpopmail from cvs.
Mark
See below.
3c3
* $Horde: passwd/lib/Driver/vpopmail.php,v 1.4.2.3 2003/02/12
22:35:36 ericr Exp $
---
* $Horde: passwd/lib/Driver/vpopmail.php,v 1.4.2.2 2003/01/29
Ryan Burton wrote:
Hey
Title: Export one domain from mysql to another
You
can always run vconvert on the domain and pull the sql stuff down to a cdb
file, Then move the files over to the new server and run vconvert again to
stuff the domain into the new DB.
Mark
-Original Message-
From: Remo
-Original Message-
From: Remo Mattei
[mailto:[EMAIL PROTECTED]
Sent: Friday,
November 21, 2003 4:19 PM
To: [EMAIL PROTECTED]
Subject: RE: [vchkpw] Export one
domain from mysql to another
That
sound like a lot of pain!!!
Remo
From: Mark Spieth
[mailto:[EMAIL
Are you using cdb files or mysql for your
user database?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 26, 2003
8:13 AM
To: [EMAIL PROTECTED]
Subject: [vchkpw] Move Domains
from one server to another
hi @ all,
how can I
/home/vpopmail/test.com
untar the tgz file and move the untarred
test.com directory into /home/vpopmail and you should be good to go.
Mark
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 26, 2003
8:13 AM
To: [EMAIL PROTECTED]
Subject
Did you increase the memory that the smtp service can use?
Look at your smtp/run file
exec /usr/bin/softlimit -m 1380 \
-Original Message-
From: Alastair Battrick [mailto:[EMAIL PROTECTED]
Sent: Friday, November 28, 2003 3:01 PM
To: [EMAIL PROTECTED]
Subject: [vchkpw] qmail,
/var/qmail/control/maxrecipients
This will limit the maximum amount of
recipients in an email, as far as limiting the amount of email a day, Nothing
comes to mind, You can use the tar pit delay setting to slow down their sending
of email..
Mark
-Original Message-
From
29, 2003 2:27 AM
To: [EMAIL PROTECTED]
Subject: RE: [vchkpw] Limits
On Sun, 2003-12-28 at 22:25, Mark Spieth wrote:
/var/qmail/control/maxrecipients
not part of stock qmail.
This will limit the maximum amount of recipients in an email
nope, it won't. qmail will ignore it because it simply
Daemonize
[snip]
-D, --debugPrint debugging messages
[snip]
-Mark
/courier-imap-3.0.3.20040509/authlib'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/home/mtm/courier-imap-3.0.3.20040509/authlib'
make: *** [all-recursive] Error 1
does anyone why its happening ?
Thanks,
Mark
, Chris Odell wrote:
Check your password for sql.
-Original Message-
From: Mark Matrafajlo [mailto:[EMAIL PROTECTED]
Sent: Monday, May 17, 2004 11:08 AM
To: vpop
Subject: [vchkpw] Any ideas
Please enter password for me@blocked.com:
enter password again:
vmysql
on ?
thx
Mark
yes...could that be it ?
On Wed, 2004-05-19 at 17:14, Patrick Donker wrote:
Mark Matrafajlo wrote:
I just can't seem to compile courier with vpopmail and mysql as a
backend. Hopefully someone has some insight for me:
./configure --prefix=/usr/local/courier-imap --disable-root-check
I just can't seem to compile courier with vpopmail and mysql as a
backend. Hopefully someone has some insight for me:
./configure --prefix=/usr/local/courier-imap --disable-root-check
--without-authpam --without-authldap --without-authpwd
--without-authmysql --without-authpgsql
when i look in the vpopmail/include directory i have just 2 files
vpopmail_config.h and vpopmail.h...no config.h so i cp vpopmail_config.h
to config.h...no dice
On Wed, 2004-05-19 at 17:39, Patrick Donker wrote:
Mark Matrafajlo wrote:
yes...could that be it ?
On Wed, 2004-05-19 at 17:14
do you think it has something todo with the fact that its not in the
standard directory /home/vpopmail...on this machine it defaults to
/var/qmail/vpopmail ?
On Wed, 2004-05-19 at 18:12, Ken Jones wrote:
On Wednesday 19 May 2004 04:51 pm, Mark Matrafajlo wrote:
when i look in the vpopmail
Do i need the authvchkpwd enabled on the courier ./configure to work
with vpopmail and mysql
On Thu, 2004-05-20 at 09:14, Mark Matrafajlo wrote:
do you think it has something todo with the fact that its not in the
standard directory /home/vpopmail...on this machine it defaults to
/var/qmail
yes still doesn't compilei'm at a loss
On Thu, 2004-05-20 at 13:11, Patrick Donker wrote:
did you try already?
Mark Matrafajlo wrote:
Do i need the authvchkpwd enabled on the courier ./configure to work
with vpopmail and mysql
On Thu, 2004-05-20 at 09:14, Mark Matrafajlo wrote
as the data layout is exactly the same for both
users/domains in the database, even the encrypted password fields are the
same..
Please tell me where the hidden setting is,
Mark.
On Monday 14 June 2004 18:04, Mark Richardson wrote:
Hi,
I am trying to migrate and old qmail/vpopmail server
Dave have you already found some more info on this subject ?
I have the same problem here (see my post)
Mark.
On Wednesday 04 August 2004 18:21, Dave Goodrich wrote:
qmail 1.03
vpopmail 5.4.0
mysql 3.23.58
We had been using cdb and switched to using mysql auth when we moved our
users
unimplemented in vconvert), so what else will i run into ?
I thought the mysql support was pretty stable in vpopmail ?
This list is not maintained by any developers that can shed some light on this
subject ?
Thanx,
Mark.
On Thursday 05 August 2004 14:59, Dave Goodrich wrote:
I found little on the subject
-l gives me 43 addresses. Everything there
looks ok. Any ideas what I should do to try and find out why vdominfo is
giving me inaccurate info on this domain?
Thanks,
Mark De Groot
Hello,
That I wasn´t asking for, Ken!
Anybody know a HowTO for installing qmail-scanner + clamav
Regards,
Olli Etzel
Try www.qmailrocks.com or www.qmailtoaster.com
Mark
-Original Message-
From: Tom Collins [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 15, 2006 1:25 AM
To: vchkpw@inter7.com
Subject: Re: [vchkpw] vdominfo is giving incorrect info
On Feb 13, 2006, at 9:59 AM, Mark DeGroot wrote:
The directory structure looks ok. Permissions
1 - 100 of 109 matches
Mail list logo