Re: [vdr] TBS driver breaks lirc_serial
Hi Karim, Karim schrieb am 19.05.2016 um 22:36: I have an issue with TBS drivers (even with last version from april 2016). As soon as I install TBS Linux drivers and reboot, lirc_serial doesn't load anymore. I use TBS drivers v160405 with OpenSuse 13.2 (kernel 3.16.7-35) but lirc from TBS driver package. My workflow to do this is: cd linux-tbs-drivers make distclean ./v4l/tbs-x86_64.sh make # but only some seconds to initialize build and generate v4l/.config vi v4l/.config # CONFIG_LIRC_STAGING=y and CONFIG_LIRC_SERIAL=m make # remove (with or without backup) original media SICDIR=/lib/modules/sic/`date +%Y-%m-%d_%H:%M`/`uname -r`/kernel/drivers/media/ mkdir -p $SICDIR/media $SICDIR/staging/media mv /lib/modules/`uname -r`/kernel/drivers/media/* $SICDIR/media/ mv /lib/modules/`uname -r`/kernel/drivers/staging/media/* $SICDIR/staging/media/ make install reboot Best regards. Andreas Böttger ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] TBS driver breaks lirc_serial
Hi, I have an issue with TBS drivers (even with last version from april 2016). My remote is on serial COM1 and works fine, using Wheezy 7.7.0 x64 + lirc cvs from 2013. kernel : Linux 3.2.0-4-amd64 dmesg OK : [6.524401] lirc_serial: module is from the staging directory, the quality is unknown, you have been warned. [7.421128] lirc_serial: auto-detected active low receiver [7.421182] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0 As soon as I install TBS Linux drivers and reboot, lirc_serial doesn't load anymore. dmesg NOK : [7.650032] lirc_serial: module is from the staging directory, the quality is unknown, you have been warned. [7.650193] lirc_serial: disagrees about version of symbol lirc_register_driver [7.650197] lirc_serial: Unknown symbol lirc_register_driver (err -22) I need lirc_serial because I use Logitech Remote. Do you know how we could fix this issue ? Best regards. Karim -- modinfo lirc_serial filename: /lib/modules/3.2.0-4-amd64/kernel/drivers/staging/media/lirc/lirc_serial.ko license:GPL author: Ralph Metzler, Trent Piepho, Ben Pfaff, Christoph Bartelmus, Andrei Tanas description:Infra-red receiver driver for serial ports. depends:lirc_dev staging:Y intree: Y vermagic: 3.2.0-4-amd64 SMP mod_unload modversions parm: type:Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug, 5 = NSLU2 RX:CTS2/TX:GreenLED) (int) parm: io:I/O address base (0x3f8 or 0x2f8) (int) parm: iommap:physical base for memory mapped I/O (0 = no memory mapped io) (bool) parm: ioshift:shift I/O register offset (0 = no shift) (int) parm: irq:Interrupt (4 or 3) (int) parm: share_irq:Share interrupts (0 = off, 1 = on) (bool) parm: sense:Override autodetection of IR receiver circuit (0 = active high, 1 = active low ) (bool) parm: txsense:Sense of transmitter circuit (0 = active high, 1 = active low ) (bool) parm: softcarrier:Software carrier (0 = off, 1 = on, default on) (bool) parm: debug:Enable debugging messages (bool) -- modinfo lirc_dev filename: /lib/modules/3.2.0-4-amd64/kernel/drivers/media/rc/lirc_dev.ko license:GPL author: Artur Lipowski description:LIRC base driver module depends: intree: Y vermagic: 3.2.0-4-amd64 SMP mod_unload modversions parm: debug:Enable debugging messages (bool) -- RAS ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Looking for DVB-T and DVB-S2 CI tuners
Hi, I am using TBS PCI-E tuners (6922/6928/6280); hardware are OK, but drivers are very bad : they break my lirc_serial : [7.650032] lirc_serial: module is from the staging directory, the quality is unknown, you have been warned. [7.650193] lirc_serial: disagrees about version of symbol lirc_register_driver [7.650197] lirc_serial: Unknown symbol lirc_register_driver (err -22) So I am looking for tuners which are supported by vanilla Linux kernel, without patching or installing additional drivers : - For DVB-T : PCI, PCIE or USB, dual tuner **with high sensitivity**. - For DVB-S2 : PCI or PCIE, tuner with CI and another without, or a dual tuner with CI. I found a Digital Device "OctopusCI S2 PRO twin CI/DVBS2", but it seems that CI is buggy, and drivers are not in Linux kernel : http://www.digital-devices.eu/shop/en/professional-series/octopus-pcie-serie s/237/digital-devices-octopusci-s2-pro-twin-ci-and-twin-dvb-s2-tuner-forr-pc ie-slot Thanks for your advice. Regards. Karim ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] All H264 channels on 23.5E being marked as OBSOLETE
Hi, with one of the last VDR updates (I currently run version 2.2.0), all of my Czech H.264 channels are being marked as "OBSOLETE", even though they all play correctly. I use VDR as a streaming server only. Examples: Kino CS OBSOLETE;OBSOLETE M7 Group:12109:hM2O35S1:S23.5E:27500:3318=27:3328=cze@3:0:624,D96,500:5058:3:3221:0 CT 1 HD OBSOLETE;OBSOLETE Towercom:12363:vM2O35S1:S23.5E:29500:5011=27:5021=cze@3,5031=qaa@3,5111=cze@3;5091=cze@106:0;5141=cze:624,D96,666,500:4901:3:3234:0 All of the channels with this problem use the correct official frequencies, i.e. they are not in the process of being obsoleted. If I search for these channels again (I use scan-s2), I get the same results. Curiously, the same problem doesn't happen with MPEG-2 channels or with channels from other sat positions (e.g. BBC World News Europe HD at 19.2E). Any ideas? It is rather annoying :-( -- Luboš Doležel smime.p7s Description: Elektronicky podpis S/MIME ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr