Re: [vdr] TBS driver breaks lirc_serial
Hi Karim, I have another idea - there are some other parameters: vdr:~ # grep LIRC /install_etc/tbs/linux-tbs-drivers/v4l/.config # CONFIG_LIRC_IGORPLUGUSB is not set CONFIG_LIRC=m # CONFIG_LIRC_IMON is not set CONFIG_LIRC_SERIAL=m CONFIG_IR_LIRC_CODEC=m # CONFIG_LIRC_SASEM is not set # CONFIG_LIRC_SERIAL_TRANSMITTER is not set # CONFIG_LIRC_PARALLEL is not set # CONFIG_LIRC_SIR is not set # CONFIG_LIRC_ZILOG is not set CONFIG_LIRC_STAGING=y # CONFIG_LIRC_TTUSBIR is not set # CONFIG_LIRC_BT829 is not set vdr:~ # modinfo lirc_serial ... parm: type:Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug, 5 = NSLU2 RX:CTS2/TX:GreenLED) (int) ... I use a "home-brew" receiver, maybe you need some other "type" parameter. Compare the v4l/.config from TBS with .config of your kernel. On my system it looks like this: vdr:~ # zgrep LIRC /proc/config.gz CONFIG_LIRC=m CONFIG_IR_LIRC_CODEC=m CONFIG_LIRC_STAGING=y CONFIG_LIRC_BT829=m CONFIG_LIRC_IGORPLUGUSB=m CONFIG_LIRC_IMON=m CONFIG_LIRC_PARALLEL=m CONFIG_LIRC_SASEM=m CONFIG_LIRC_SERIAL=m CONFIG_LIRC_SERIAL_TRANSMITTER=y CONFIG_LIRC_SIR=m CONFIG_LIRC_ZILOG=m Best regards. Andreas Böttger ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] TBS driver breaks lirc_serial
Hi Karim, Karim schrieb am 20.05.2016 um 22:59: lirc_serial is now loading : dmesg [7.492111] lirc_serial: Manually using active low receiver [7.492378] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 2 Unfortunately, remote doesn't work (tested with mode2). If you try it with your old setup, original lirc modules and the same config files - is then all ok? Are there any errors in syslog? I noticed in ".config" file : # CONFIG_LIRC_SERIAL_TRANSMITTER is not set I changed to : CONFIG_LIRC_SERIAL_TRANSMITTER=y I think that you will need this only for any infrared sender. Did I missed something ? Hmm... I restart lirc in my runvdr script like this: /etc/init.d/lirc stop sleep 1 rmmod lirc_serial lirc_dev # to be sure sleep 1 setserial /dev/ttyS0 uart none sleep 1 /etc/init.d/lirc start vdr:~ # dmesg | grep lirc lirc_dev: IR Remote Control driver registered, major 247 lirc_serial: Manually using active low receiver lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0 vdr:~ # lsmod | grep lirc lirc_serial18982 3 lirc_dev 19166 1 lirc_serial vdr:~ # grep '^[A-Z]' /etc/sysconfig/lirc LIRCD_DEV_PERMISSIONS="660" LIRCD_DEV_OWNER="root:video" LIRCD_DRIVER="default" LIRCD_DEVICE="/dev/lirc0" LIRC_MODULE="lirc_serial" LIRCD_LISTENPORT= LIRCD_CONNECT= Best regards. Andreas Böttger ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] TBS driver breaks lirc_serial
Hi Andreas, Thanks a lot for the tip ! lirc_serial is now loading : dmesg [7.492111] lirc_serial: Manually using active low receiver [7.492378] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 2 Unfortunately, remote doesn't work (tested with mode2). I noticed in ".config" file : # CONFIG_LIRC_SERIAL_TRANSMITTER is not set I changed to : CONFIG_LIRC_SERIAL_TRANSMITTER=y And I ran again the worflow, but it doesn't solve. Did I missed something ? Best regards Karim -Message d'origine- De : vdr [mailto:vdr-boun...@linuxtv.org] De la part de Birgit & Andreas Böttger Envoyé : jeudi 19 mai 2016 23:38 À : VDR Mailing List Objet : Re: [vdr] TBS driver breaks lirc_serial Hi Karim, Karim schrieb am 19.05.2016 um 22:36: > I have an issue with TBS drivers (even with last version from april 2016). > As soon as I install TBS Linux drivers and reboot, lirc_serial doesn't load > anymore. I use TBS drivers v160405 with OpenSuse 13.2 (kernel 3.16.7-35) but lirc from TBS driver package. My workflow to do this is: cd linux-tbs-drivers make distclean ./v4l/tbs-x86_64.sh make # but only some seconds to initialize build and generate v4l/.config vi v4l/.config # CONFIG_LIRC_STAGING=y and CONFIG_LIRC_SERIAL=m make # remove (with or without backup) original media SICDIR=/lib/modules/sic/`date +%Y-%m-%d_%H:%M`/`uname -r`/kernel/drivers/media/ mkdir -p $SICDIR/media $SICDIR/staging/media mv /lib/modules/`uname -r`/kernel/drivers/media/* $SICDIR/media/ mv /lib/modules/`uname -r`/kernel/drivers/staging/media/* $SICDIR/staging/media/ make install reboot Best regards. Andreas Böttger ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Hi Klaus, we need your help
See http://www.vdr-portal.de/board16-video-disk-recorder/board55-vdr-plugins/p1273187-ring-buffer-overflows-cdevice-detach-blockiert/#post1273187 Klaus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Hi Klaus, we need your help
Hi Klaus, please have a look at http://www.vdr-portal.de/board16-video-disk-recorder/board55-vdr-plugins/128920-ring-buffer-overflows-cdevice-detach-blockiert/?s=549ec1180bfb2f98a7fde3211785f589756c26d0 We need your help. Thanks, Joerg ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
