[vdr] PCI GT610 vdpau card - 512 MB or 1GB memory ?

2013-12-08 Thread Goga777
Hello

is there any sense to buy PCI GT610 card with 1 GB memory for processing of 
1080i/p HD video ? 
may be 512 MB will be enough ? 

I plan to use vdpau decoding of HD video + temporal spatial deinterlacing + 
upscaling of SD video.

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] PCI GT610 vdpau card - 512 MB or 1GB memory ?

2013-12-08 Thread Goga777
how do you monitor video-memory consumption ? with nvidia-smi ?

  is there any sense to buy PCI GT610 card with 1 GB memory for processing of 
  1080i/p HD video ? 
  may be 512 MB will be enough ? 
  
  I plan to use vdpau decoding of HD video + temporal spatial deinterlacing + 
  upscaling of SD video.
 
 I'm seeing around 250M total memory use while decoding and deinterlacing 
 1080i to a single 1080 display.
 Composite extension completely disabled since all it does is cause tearing 
 and eat memory like crazy. If
 all you need is video playback on that system then 512M is more than plenty.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] VDPAU for AMD

2013-04-19 Thread Goga777
 That is cool news. Next question, which AMD APU will support
 temporal-spatial deinterlacing of 1080i at full framerate?

and high quality upscaling as well

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] multistream support in VDR

2013-01-03 Thread Goga777
  Recently in kernel was added full multistream support (DTV_STREAM_ID)
  https://patchwork.kernel.org/patch/1351421/
 
  is there any plans to implement multistream support in vdr ?
 
  DTV_STREAM_ID is already used in VDR for DVB-T2.
 
  what about DTV_STREAM_ID for dvb-s2 ?
 
  Which parameter would go in there, and where would it come from?
 
  parameter P in channels.conf for identification of sub-stream
 
  WeddingTV;Tivuitalia:11914:HM5S1P2:S31.5E:27500:1026:1027=ita:0:0:4:8572:972:0
 
  and small patch from crazycat for VDR 1.7.35
 
 Have you tested this and does it actually work?

no, I have not tested

As Manu mentioned - my cx24116 based hvr4000 dvb-s2 card doesn't support 
multistream 

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] multistream support in VDR

2013-01-02 Thread Goga777
Hi

Recently in kernel was added full multistream support (DTV_STREAM_ID)
https://patchwork.kernel.org/patch/1351421/

is there any plans to implement multistream support in vdr ?

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] multistream support in VDR

2013-01-02 Thread Goga777
  Recently in kernel was added full multistream support (DTV_STREAM_ID)
  https://patchwork.kernel.org/patch/1351421/
 
  is there any plans to implement multistream support in vdr ?
 
 DTV_STREAM_ID is already used in VDR for DVB-T2.

what about DTV_STREAM_ID for dvb-s2 ? 

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] multistream support in VDR

2013-01-02 Thread Goga777
  Recently in kernel was added full multistream support (DTV_STREAM_ID)
  https://patchwork.kernel.org/patch/1351421/
 
  is there any plans to implement multistream support in vdr ?
 
 
  DTV_STREAM_ID is already used in VDR for DVB-T2.
 
 The current DVB-T2 support is with CXD2820. CXD2820 supports only a single TS.
 The only demodulators in kernel that supports Multiple Input Stream
 (MIS) are the STV0900 and the STV0903.

yes. 

But what do you think about cx24116 - is it possible to patch cx24116 
driver/firmware for multistream
support ? 

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] multistream support in VDR

2013-01-02 Thread Goga777
  Recently in kernel was added full multistream support (DTV_STREAM_ID)
  https://patchwork.kernel.org/patch/1351421/
 
  is there any plans to implement multistream support in vdr ?
 
 
  DTV_STREAM_ID is already used in VDR for DVB-T2.
 
  The current DVB-T2 support is with CXD2820. CXD2820 supports only a single 
  TS.
  The only demodulators in kernel that supports Multiple Input Stream
  (MIS) are the STV0900 and the STV0903.
 
  yes.
 
  But what do you think about cx24116 - is it possible to patch cx24116 
  driver/firmware for multistream
  support ?
 
 @Goga: can you explain in just a few words what exactly Multiple Input 
 Stream is,

The multistream is part of dvb-s2 standard. The main idea is on ONE carrier can 
exist
several independed transport streams. Each stream can exist as separated TS 
stream with channels. 

more details here are
http://www.newtec.eu/applications/broadcast/multistream-or-efficient-satellite-distribution-of-terrestrial-tv-and-mobile-tv-content/


 and if there are any DVB-S2 channels (here in Europe) that actually use this?

yes,

Tivuitalia
http://www.lyngsat.com/Astra-1G.html
freq 11914


Ukraian provider ZeonBund
http://www.lyngsat.com/Astra-1G.html
freq 11992 H

Mediaset 
http://www.lyngsat.com/Eutelsat-Hot-Bird-13A-13B-13C.html
11432 V
12539 H



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] multistream support in VDR

2013-01-02 Thread Goga777
FYI


there are patched for multistream scan-s2  szap-s2
http://www.tbsdtv.com/forum/viewtopic.php?f=26t=1874

+ multistream patch for dvblast
http://mailman.videolan.org/pipermail/dvblast-devel/2012-October/001122.html





___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] multistream support in VDR

2013-01-02 Thread Goga777
  Recently in kernel was added full multistream support (DTV_STREAM_ID)
  https://patchwork.kernel.org/patch/1351421/
 
  is there any plans to implement multistream support in vdr ?
 
  DTV_STREAM_ID is already used in VDR for DVB-T2.
 
  what about DTV_STREAM_ID for dvb-s2 ?
 
 Which parameter would go in there, and where would it come from?

parameter P in channels.conf for identification of sub-stream 

WeddingTV;Tivuitalia:11914:HM5S1P2:S31.5E:27500:1026:1027=ita:0:0:4:8572:972:0

and small patch from crazycat for VDR 1.7.35


Goga
diff -ru vdr-1.7.35/dvbdevice.c vdr-1.7.35.new/dvbdevice.c
--- vdr-1.7.35/dvbdevice.c	2012-12-30 13:27:39.0 +0200
+++ vdr-1.7.35.new/dvbdevice.c	2013-01-02 22:22:23.900604880 +0200
@@ -230,7 +230,7 @@
   ST(ACST*)  q += PrintParameter(q, 'I', MapToUser(inversion, InversionValues));
   ST(ACST*)  q += PrintParameter(q, 'M', MapToUser(modulation, ModulationValues));
   ST(  S 2)  q += PrintParameter(q, 'O', MapToUser(rollOff, RollOffValues));
-  ST(   T2)  q += PrintParameter(q, 'P', plpId);
+  ST(  ST2)  q += PrintParameter(q, 'P', plpId);
   ST(  ST*)  q += PrintParameter(q, 'S', MapToUser(system, SystemValuesSat)); // we only need the numerical value, so Sat or Terr doesn't matter
   ST(   T*)  q += PrintParameter(q, 'T', MapToUser(transmission, TransmissionValues));
   ST(   T*)  q += PrintParameter(q, 'Y', MapToUser(hierarchy, HierarchyValues));
@@ -823,8 +823,8 @@
  SETCMD(DTV_TRANSMISSION_MODE, dtp.Transmission());
  SETCMD(DTV_GUARD_INTERVAL, dtp.Guard());
  SETCMD(DTV_HIERARCHY, dtp.Hierarchy());
- if (frontendType == SYS_DVBT2) {
-// DVB-T2
+ if (frontendType == SYS_DVBT2 || frontendType == SYS_DVBS2) {
+// DVB-T2/DVB-S2
 SETCMD(DTV_STREAM_ID, dtp.PlpId());
 }
 
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Replacing aging VDR for DVB-S2

2011-01-15 Thread Goga777
 In general, get a gt220, as it has built in audio hardware, so that
 you should get audio without clock drift relative to the hdmi output.
 It is also powerfull enough to do temporal spatial deinterlacing on
 1080i material.

what do you think about 

NVIDIA's GeForce GT 430
http://www.anandtech.com/show/3973/nvidias-geforce-gt-430

seems it's the best choice for vdr/htpc

- more cold than gt220
- more powerfull
- HDMI 1.4,
- 3D over HDMI
- Ethernet channel
- Audio return channel
- 4k × 2k Resolution Support



-- 
Удачи,
Игорь

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan not working with empty channels.conf!

2010-10-21 Thread Goga777
 I tested reelchannelscan on my vdr-1.7.15 and had problems 
 with it.
 It crashs when using it with empty channels.conf, because it need a
 tuned channel before scanning.
 When started with an empty channels.conf there is no channel tuned and
 the plugin gets no valid initial channel data.
 
 Do we have a fix for that issue?
 
 Who does maintain an oficial (vdr) compatible version of the plugin?

imho - nobody

have a look on actuator plugin from Luca
http://www.ventoso.org/luca/vdr/

it can scan dvb-s2 channels (see the discussion in vdr list about this plugin)


-- 
Удачи,
Игорь

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan not working with empty channels.conf!

2010-10-21 Thread Goga777
a777 ha escrit:
  I tested reelchannelscan on my vdr-1.7.15 and had problems
  with it.
  It crashs when using it with empty channels.conf, because it need a
  tuned channel before scanning.
  When started with an empty channels.conf there is no channel tuned and
  the plugin gets no valid initial channel data.
 
  Do we have a fix for that issue?
 
  Who does maintain an oficial (vdr) compatible version of the plugin?
 
  imho - nobody
 
  have a look on actuator plugin from Luca
  http://www.ventoso.org/luca/vdr/
 
  it can scan dvb-s2 channels (see the discussion in vdr list about this 
  plugin)
 
 Though I don't have the hardware to test dvb-s2 and I never tried with 
 an empty channels.conf.

yes, your plugin is working well with dvb-s2 transponders, tested with vdr 
1.7.16

thank you very much for your scaner

-- 
Удачи,
Игорь

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [ANNOUNCE] vdr-actuator-1.2.0 plugin

2010-10-10 Thread Goga777
 From this version it is also possible to use the plugin without an
  actuator, i.e. as a channel scanner only.
 
  does it mean, that with your plugin no need to use reelchannelscan plugin 
  for creating/updating
  channels.conf ?
 
 Yes, but I could only test it with plain dvb-s, no dvb-s2.
 Also, it doesn't to a blind scan, it needs a transponder.ini file for 
 each satellite that you want to scan.

does the sources of scaner based on reelchanellscan plugin ? Why don't release 
the scaner as separete
plugin ? 

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [ANNOUNCE] vdr-actuator-1.2.0 plugin

2010-10-09 Thread Goga777
  From this version it is also possible to use the plugin without an 
 actuator, i.e. as a channel scanner only.

does it mean, that with your plugin no need to use reelchannelscan plugin for 
creating/updating
channels.conf ?

 Note that it only compiles with the current development version of vdr.
 
 The changes:
 
 - Version for current development version of vdr (= 1.7.15)
 - DVB-S2 support (untested, I don't have DVB-S2 hardware)
 - Experimental seractuator module (uses a serial port instead
of a parallel port)
 - Complete rewrite of the channel scanner
 - The plugin can now work without an actuator (i.e. as a channel scanner
only) with the command line option -s or --scanonly

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] cSdtFIlter and LinkChannels

2010-10-02 Thread Goga777
 I'm trying to understand cSdtFilter in order to write a channel scanner.

will it the plugin for vdr with possibility to scan dvb-s2 channels ? 

Goga


 I see that when it finds a SI::NVODReferenceDescriptorTag it will add it 
 to the previously found channel with channel-SetLinkChannels, but it 
 only does if it is in the current section (channel is a local variable) 
 while the sdt could span several sections.
 
  From the specifications here
 
 http://neuron2.net/library/mpeg2/iso13818-1.pdf
 
 and here
 
 http://www.dvb.org/technology/standards/a005r5.tm1324r13.tr101211.v1.10.1.pdf
 
 I don't understand if this mechanism is correct, shouldn't the 
 time_shifted_services link to the NVOD_reference?
 Besides, I don't see that the relation between a channels and its 
 linkchannels is preserved in channels.conf (though I don't really care).
 
 I also see that cSdtFilter starts processing with the first section, and 
 that shouldn't really be necessary as long as one processes all sections.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Advice on new motherboard, xinelibou tput, vdpau,hdmi video audio, etc.

2010-08-27 Thread Goga777
  to verify. Even the Xorg.0.log lies about the fact that 50Hz are active
  but in reality it uses 60Hz. Maybe nVidia has fixed that in the meantime.
 
 To watch HD broadcasts I use the hdmi output on my laptop.
 It isn't configured in xorg but I just configure it on the fly with 
 nvidia-settings in twin-view mode (the laptop panel at 60Hz and the hdmi 
 port at 50Hz).
 Provided that I disable Force Full GPU Scaling, the tv reports a 50Hz 
 signal.

if you disabled full gpu scaling , how upscaling will work really ? what and 
how will upscale SD video to 1080p ?

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Advice on new motherboard, xinelibou tput, vdpau,hdmi video audio, etc.

2010-08-27 Thread Goga777
  if you disabled full gpu scaling , how upscaling will work really ? what and
  how will upscale SD video to 1080p ?
 
 This setting is only useful if your display device can't scale on its own or 
 the scaling is worse quality. If you enable it the card will always output 
 native resolution at native refresh.
 
 If disabled the gpu will not touch the mode and output whatever you tell it 
 to, in which case the display itself will have to scale the mode as needed.


let's have a look on the following situation.

I have full HD TV set, which of course can upscale. TV
My xorg.conf has default mode - 1080p

can be 2 situation

With vdr and vdr-xine I'm watching SD 576i channels and after that I switch to 
HD 1080i channel.

Does graphic card do upscale in first variant (with SD channel) ?

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.

2010-08-20 Thread Goga777
btw, have a look on new ASRock Core 100HT NetTop
http://www.phoronix.com/scan.php?page=articleitem=asrock_core100htnum=1

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.

2010-08-19 Thread Goga777
  is there really no recommendation for a board not using Nvidia 
  graphics components? It would really be great to not depend on 
  proprietary drivers.
 
  Hardware decoding through VA-API is working on some Intel chipsets 
  and CPUs, but I haven't seen any usable GPU deinterlacing implementations 
  besides those in Nvidia's VDPAU.
 
 I also would like to remind the framerate issues. Naturally you decide what
 is enough precision and quality for you.
 
 Computer hardware usually cannot provide 50.000Hz, 59.940Hz or 23.976Hz
 outputs to your TV/Monitor. This will cause some judder on display output
 as MPEG/AVC input-stream is not synchronized to output framerate.

do you mean that all nvidia vdpau cards with existing drivers from Nvidia can't 
provide exact 50.000Hz,
59.940Hz or 23.976Hz ??


Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.

2010-08-16 Thread Goga777
 Why not get one of the Zotac IONITX boards and stick it in the M350
 case like I did?  

would you like please show qvdpautest results for zotzc ionitx

Fanless, low power, and OS can be installed on SSD,
 usb flash stick, Microdrive, SD(HC), CF, you name it.  They all have
 usb adapters so that way your system will remain totally silent.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.

2010-08-16 Thread Goga777
  I recommend you to use PCI-E GT220 Geforce card with motheboard which you 
  will choice
 
 Asus Bravo 220 silent seems to be a passive model. Do you know if these
 non-motherboard integrated cards support 7.1ch PCM audio over HDMI?

seems, doesn't support 


 I got as PM one tip that pointed to this page
 
 http://en.wikipedia.org/wiki/Nvidia_PureVideo#Table_of_PureVideo_.28HD.29_GPUs
 
 I wonder if some smaller number cheaper model with similar VP4/C skills
 would do? E.g. Asus EN210 Silent? It could also produce less heat? The
 text in Wikipedia is not perfectly in line with the table so I wonder if
 GT2xx is needed for best VDPAU support.
 
 It seems that the IONs are VP3/B so your prosal is certainly better (if
 there is HDMI audio support).
 
  
  this series has very good performance for 1080i temporal_spatial 
  deinterlacing and h264 decoding
  
  have a look on qvdpautest
  http://linuxdvb.org.ru/wbb/index.php?page=ThreadpostID=16142#post16142
  
 
 Fortunately there's google translate - so there's some worry about
 passive cooled GT220s? At least the picture of Gigabyte GT220 shows a
 pretty large heatsink and fan ;^)

yes, I will clarify this worries :)

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Advice on new motherboard, xineliboutput, vdpau, hdmi video audio, etc.

2010-08-15 Thread Goga777
Приветствую, Seppo

I recommend you to use PCI-E GT220 Geforce card with motheboard which you will 
choice

this series has very good performance for 1080i temporal_spatial deinterlacing 
and h264 decoding

have a look on qvdpautest
http://linuxdvb.org.ru/wbb/index.php?page=ThreadpostID=16142#post16142

 My old HTPC motherboard died and I'm now looking for a new one to become 
 a vdr-sxfe thin client. The old Silverstone case is for normal ATX 
 board but I no more need PCI slots so a smaller one, even a Mini-ITX 
 would do. Since the PC runs 24/7 I'm interested in low-power 
 motherboards with Atom CPU. There should be VDPAU support for MPEG-2 
 SDTV decoding + high-quality de-interlacing. I'm watching also sometimes 
 H.264 HDTV channels from satellite. There should be 1080p50 video + up 
 7.1ch multi-channel PCM audio over HDMI. I'd like to get rid of SPDIF 
 connection to AV-receiver.
 
 My HTPC box has a home-brew LIRC receiver that connected to motherboard 
 (Asus style) COM port heading. If COM ports are history I could change 
 to Bluetooth remote control with a PS3 Blu-Ray remote. Therefore 
 integrated BT support would be nice (otherwise some USB-BT dongle). WLAN 
 is not mandatory since I stream from vdr server over gigabit ethernet. 
 Are there still issues with some ethernet chipsets and Linux?
 
 I found some options such as Asus AT3IONT-I DELUXE, Asus AT3IONT-I, Asus 
 AT5IONT-I. I would be happy to hear experiences about these motherboards 
 with Linux and Xine. Are there problems with some motherboard features? 
 Other recommendations are welcome too!

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] vdr + Mystique SaTiX-S2 Dual / V2 CI card

2010-07-14 Thread Goga777
Hi

has someone the experience with vdr and Mystique SaTiX-S2 Dual / V2 CI ?
What about your impression for them ?
Does this card work well under Linux ?

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] rotor

2010-06-25 Thread Goga777
Приветствую, Timothy

 Is your bud motorized? 

yes, I have the motor   STRONG SRT DM 2100
http://faraday-systems.uaprom.net/p383218-motopodves-disek-pozitsioner.html
 (not actuator)  and the the dish with diameter 1,1 meter 

You found a diseqc motor that works with big 
 dishes? 

1,1 meter is not big size. And I can watch several satellites in C band with it 
- the sat positions - 40e,
80e, 90e, 95e

The secret is in good LNB, specially and manually adopted for C-band and my 
dish (from Russian engineer
Alyno) http://forum2.alyno.ru/phpBB2/viewtopic.php?p=713#713

Because they need bigger motors then can be powered by the card, 
 they use a different setup. A Actuator that runs on 36v and is told to 
 move one way or the other and then pulses are counted and then the motor 
 is told to stop. Small dish rotors have all that logic on board and you 
 just teil them where you want the dish pointing

ok, understand than.
But in my case no need any big and special motors 

Goga
 


 On 6/24/2010 1:04 PM, Goga777 wrote:
  Приветствую, Mike
  the rotor plugin ( or at least version 1.4mh) can control one rotor per 
  card.
 
  For c-band you need a vbox to translate the diseqc commands and to provide 
  the
  36 volts to drive the actuator. Thats how I do it. costs about $40
 
  why need vbox for C-band ?
  I can watch C-band with vdr + rotor + diseqc + 3 Lnb (two LNB are for Ku 
  band, third LNB is for C-band)
  without any tricks

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] rotor

2010-06-24 Thread Goga777
Приветствую, Mike
 the rotor plugin ( or at least version 1.4mh) can control one rotor per card.
 
 For c-band you need a vbox to translate the diseqc commands and to provide 
 the 
 36 volts to drive the actuator. Thats how I do it. costs about $40 

why need vbox for C-band ?
I can watch C-band with vdr + rotor + diseqc + 3 Lnb (two LNB are for Ku band, 
third LNB is for C-band)
without any tricks

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Xine - VDpau config help

2010-06-19 Thread Goga777
  Glad to hear, that you managed to fix it. I don't think that the 
  broadcaster will care about it :(
  How the GT220 is working with vdpau? Is the temporal_spatial 
  deinterlacing working without freezes or dropped frames?
  I'm thinking about buying a similar card, at the moment I'm using a 
  Geforce 8xxx onboard series, and it is not capable of temporal_spatial 
  at full HD resolution.
  Or maybe I should wait for the TT FF DVB-S2...
 
 It is working fine.  It seems it reports using temporal-spatial when 
 deinterlacing SD (I have X configured to 1080p) and temporal (even if 
 the config option asks for temporal-spatial) for HD.

it's strange

are you sure that in your xien config you have temporal-spatial for hd ?

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Dual DVB-S2 Tuner cards

2010-06-19 Thread Goga777
  I like the Tevii PCIe card.
  It has a single DVB-S2 receiver with decent sensitivity, is low profile,
  easy to set-up and multiple cards work in one system.
  
  Thomas
  
  
  
  Thanks, I'm in search of a twin/dual tuner dvb-s2 type card.
 
 I have a Satix S2 card which is a dual DVBS2 card, this one in the Linux V4L 
 wiki:
 
 http://www.linuxtv.org/wiki/index.php/Mystique_SaTiX-S2_Dual
 
 From here:
 http://www.dvbshop.net/product_info.php/info/p2318_Mystique-SaTiX-S2-V2-CI-Dual--2xDVB-S2-CI-HDTV-MPEG4-H-264.html
 
 There has been some work on the driver recently by Devin from kernellabs, 
 Devin was saying to me that
 the driver was pretty awful, it's better now but I don't know how much 
 better! 
 
 Despite this I have found iхйгщеуъt to work better than my HVR-4000

which problems do you have with hvr4000 ???

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [Test] Release candidate streamdev-0.5.0-rc1

2010-06-19 Thread Goga777
Приветствую, Frank

will streamdev continue to support the streaming for xbmc ?


 Hi there,
 
 I'm about to prepare streamdev releases 0.4.0 (final release for VDR-1.4) and
 0.5.0 (for VDR-1.6/1.7). The 0.5.0 release will contain two larger changes
 which have not been commited to the main CVS branch yet. Maybe some of you
 want to review and comment on these. Get the tarball at
 http://streamdev.vdr-developer.org.
 
 @all: Please see chapter Updating in the README file which is part of the
 streamdev source distribution. The new version won't run out of the box. You
 will have to rename the config directory first! Those using externremux.sh
 will also have to modify their script.
 
 @package maintainers: Upon request I split up the language resources for
 streamdev-client and streamdev-server. Instead of one vdr-streamdev.mo you
 will now get a vdr-streamdev-server.mo and a vdr-streamdev-client.mo.
 Consistently the plugin configuration directory changed from streamdev to
 streamdev-server (there are no configuration files for streamdev-client yet).
 To build only one plugin, use make client or make server respectively.
 
 @externremux users: The remux script is now responsible for emitting HTTP
 headers. Make sure you update your script! In turn the script gets a CGI like
 environment which gives you access to request headers, context information and
 details on the channel. A new sample externremux.sh is included which makes
 heavy use of request parameters. To reflect these changes, the HTTP URL path

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] pvr-testing2 xbmc discussion

2010-05-12 Thread Goga777
also you can discuss with a devellopers on xbmc-pvr irc channel on freenode.net

the archive you can find here is
http://xbmc.newsforyou.com/xbmc-pvr



  I have been using pvr-testing and pvr-testing2 for a while now, and try
  to keep up to date.  However, I have two problems/questions which I want
  to either ask or flag to the developers but am unsure how to do it or
  even if it's a known issue?
 
 I guess the best thing is to report these issues one by one on the XBMC
 bugtracker:
 
 http://xbmc.org/trac/
 
 When you open new tickets, please use the prefix pvr-testing: when you
 report a bug regarding PVR stuff. 
 Also choose the developer alwinus and the component unified-pvr.
 
 Additionally, if you also want more casual feedback on these reports from
 the German VDR community who is testing vnsiserver right now, please post
 links to your Trac tickets on 
 http://www.vdr-portal.de/board/board.php?boardid=95. You can post there in
 English language, that's not a problem.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] wirblescan 0.0.5-pre11e compilation errors

2010-04-27 Thread Goga777
Приветствую, YUP

does support wirbelscan 0.0.5 dvb-s2 or not ?

 Did anybody try to compile latest wirblescan plugin for vdr 1.7.14? I
 mean version 0.0.5-pre11e. I've got these errors:
 
 scanner.c: In member function ‘virtual void cScanner::Action()’:
 scanner.c:679:25: error: expected type-specifier
 scanner.c:679:25: error: cannot convert ‘int*’ to ‘cSwReceiver*’ in
 assignment scanner.c:679:25: error: expected ‘;’
 scanner.c:957:28: error: expected type-specifier
 scanner.c:957:28: error: cannot convert ‘int*’ to ‘cSwReceiver*’ in
 assignment scanner.c:957:28: error: expected ‘;’
 make: *** [scanner.o] Error 1
 
 I didn't find maintener's direct email address, that is why I decided to
 write to this mailing list.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Ring Buffer Overflow with streamdev

2010-04-14 Thread Goga777
  may be you will happy with
  http://trac.xbmc.org/browser/branches/pvr-testing2/xbmc/pvrclients/vdr-vnsi/vdr-plugin-vnsiserver?rev=29133
 
 
 Is this likely to replace the XBMC streamdev interface?  

yes



I can find very 
 little on the web about this vnsi and there's few helps or documentation 
 yet.
 
 First attempt, I'm getting these errors on the VDR console with vnsi:
 NSI Server started

some of them vdr users confirmed that they had very good performance with vnsi 
and currents svn version of
pvr branch

 I can see recordings on the VDR server, but the above errors occur when I 
 try and watch live-TV.
 
 I'm starting VDR with just -P'vnsiserver'
 
 What does processPacket exited with fail mean? 


sorry don't know  

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Ring Buffer Overflow with streamdev

2010-04-09 Thread Goga777
Приветствую, Simon

may be you will happy with
http://trac.xbmc.org/browser/branches/pvr-testing2/xbmc/pvrclients/vdr-vnsi/vdr-plugin-vnsiserver?rev=29133

  Hi
 
  Am running the latest streamdev cvs, patched with
  http://cobradevil.org/downloads/streamdev-xbmc.patch
  but am getting frozen live video (recordings are fine) in XBMC and the 
  following:

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] LiveBuffer patch for vdr 1.7.14 (timeshift)

2010-04-05 Thread Goga777
any news about Livebuffer patch for ts format and vdr 1.7.14 ?

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] XBMC with vdr-1.6.0 ??

2010-03-29 Thread Goga777
  Updated to [XBMC] 28276 and have exactly the same problem.  Only 3-5 
  seconds of video when switching to LiveTV...but recordings now play OK.
 
  ??
 
 Have noticed that the video freezes at the same time as I get the following 
 in /var/log/messages:
 
 Mar 29 22:11:31 freddy vdr: [11020] ERROR: 1 ring buffer overflow (188 bytes 
 dropped)
 Mar 29 22:11:37 freddy vdr: [11020] ERROR: 51 ring buffer overflows (9588 
 bytes dropped)
 Mar 29 22:11:43 freddy vdr: [11020] ERROR: 60 ring buffer overflows (11280 
 bytes dropped)
 
 (XBMC is running on the same machine as VDR)
 
 Goga777, looking at thread:
 http://forum.xbmc.org/showthread.php?t=45314page=51
 
 I'm running streamdev:
 vdr-plugin-streamdev_0.5.0~pre20090706+cvs20100307.2102.orig.tar.gz
 which should already have patch streamdev-cvs221109-AddFemonV1.diff 
 applied
 
 Have you seen this before??


please try cvs version of streamdev plugin  + cumulate patch which I mention in 
my previous mail

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] looking for working reelchannelscan for vdr-1.7.14

2010-03-29 Thread Goga777
 Has someone a working patch for reelchannelscan for vdr-1.7.14?


for vdr 1714 and reelchannelscan you should install patch for reelchannelscan
http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13971#post13971

thanks to vdr users from Russian vdr forum - 1455 yuri alex_kag 

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13

2010-03-28 Thread Goga777
 thx Goga, this at least helped to find out what is not working. I always used 
 gotox not gotoposition.
 When I choose goto position, this method is working, but gotox is not.

fine

i didn't test goto x


 there one thing that's really wierd. After I changed rotor.conf like you 
 suggested (before I had a 0 for
 all positions, as I used gotox), I can see that toggling the satellite list 
 is actually working, but
 there's no name after it.
 
 in earlier vdr version it looked like:
 Position: 2 S28.2E - Astra 2D/A/B
 
 no only this is left:
 Position: 2
 
 is satellite name displayed in your rotor plugin?

the same as you described - no any satellite name

also manual scan doesn't work 

Goag


 
 kind regards and thank you for you help
 
 
 Newsy
 
 --- Goga777 goga...@bk.ru schrieb am Sa, 27.3.2010:
 
  Von: Goga777 goga...@bk.ru
  Betreff: Re: [vdr] reelchannelscan  rotor plugin don't compile with vdr 
  1.7.13
  An: vdr@linuxtv.org
  Datum: Samstag, 27. März, 2010 20:33 Uhr
  Приветствую, Newsy
   anybody got vdr 1.7.14 working with rotor plugin +
  this patch. It's compiling without any probs but when
   I go to rotor menu I cannot select satellite, there
  always position: 0 and it can't be toggled.
  
  
  do you have /etc/vdr/plugins/rotor.conf with filled
  positions like this
  
  S5.0E = 0
  S7.0E = 0
  S9.0E = 9
  S10.0E = 0
  S13.0E = 13
  S16.0E = 0
  S19.2E = 19
  S28.2E = 0
  S28.5E = 0
  S36.0E = 36
  S39.0E = 39

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] XBMC with vdr-1.6.0 ??

2010-03-28 Thread Goga777
  please try to use this cumulate patch for streamdev-plugin from cvs
 
  http://cobradevil.org/downloads/streamdev-xbmc.patch
 
  or try to use the patched version of streamdev plugin
  ftp://elcom.kaluga.ru/pub/downloads/streamdev-2010-02-14.tar.gz
 
 
  also there's possibility to watch the femon information on xbmc-pvr
 
 Well, I've tried the patched version above, and it is better.  I now seem to 
 be able to switch between live channels in XBMC, but still only get a few 
 seconds of video/audio then the stream freezes.

don't know why you have so strange behaviour

which xbmc-pvr version do you have ?

 
 Can you send me your VDR config for streamdev from setup.conf?  (mine below)
 
  streamdev-server.AllowSuspend = 1
  streamdev-server.HTTPBindIP = 127.0.0.1
  streamdev-server.HTTPServerPort = 3000
  streamdev-server.HTTPStreamType = 1
  streamdev-server.IGMPBindIP = 0.0.0.0
  streamdev-server.IGMPClientPort = 1234
  streamdev-server.IGMPStreamType = 0
  streamdev-server.MaxClients = 5
  streamdev-server.ServerPort = 2004
  streamdev-server.StartHTTPServer = 1
  streamdev-server.StartIGMPServer = 0
  streamdev-server.StartServer = 1
  streamdev-server.SuspendMode = 0
  streamdev-server.VTPBindIP = 127.0.0.1


please use

streamdev-server.SuspendMode = 1

my settings are

streamdev-server.AllowSuspend = 1
streamdev-server.HTTPBindIP = 0.0.0.0
streamdev-server.HTTPServerPort = 3000
streamdev-server.HTTPStreamType = 0
streamdev-server.IGMPBindIP = 0.0.0.0
streamdev-server.IGMPClientPort = 1234
streamdev-server.IGMPStreamType = 0
streamdev-server.MaxClients = 1
streamdev-server.ServerPort = 2004
streamdev-server.StartHTTPServer = 0
streamdev-server.StartIGMPServer = 0
streamdev-server.StartServer = 1
streamdev-server.SuspendMode = 1
streamdev-server.VTPBindIP = 0.0.0.0


 ALSO - how do I activate femon in XMBC?  I'm running the plugin in VDR, but 
 can't bring up this screen:

- TV settings - to show snr
- choice Pm3 skin
- tune on channel 
- the button - info 
- when we will see the service info, let's press Left button - we will see the 
femon info 


Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] XBMC with vdr-1.6.0 ??

2010-03-28 Thread Goga777
Приветствую, Simon
  Well, I've tried the patched version above, and it is better.  I now seem 
  to
  be able to switch between live channels in XBMC, but still only get a few
  seconds of video/audio then the stream freezes.
 
  don't know why you have so strange behaviour
 
  which xbmc-pvr version do you have ?
 
 
 I checked out revision 28472 on 9th March 2010

I tested with old version of xbmc-pvr

please try to test with revision 28276 (it's last stable not broken revision. 
Currently xbmc developpers
don't recommend to use current svn version)

svn update -r28276


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] XBMC with vdr-1.6.0 ??

2010-03-27 Thread Goga777
Приветствую, Simon

please try to use this cumulate patch for streamdev-plugin from cvs

http://cobradevil.org/downloads/streamdev-xbmc.patch

or try to use the patched version of streamdev plugin
ftp://elcom.kaluga.ru/pub/downloads/streamdev-2010-02-14.tar.gz


also there's possibility to watch the femon information on xbmc-pvr

have a look on screenshot
http://cobradevil.org/downloads/screenshot002.png

Goga


  On 25/03/2010 20:03, Simon Baxter wrote:
 
  Apart from youe eac3 mods etc, does streamdev _actually_need_ any
  patching to work with xbmc pvr-testing2? Or should
  http://ppa.launchpad.net/hotzenplotz5/test-vdr-lucid/ubuntu/pool/main/v/vdr-plugin-streamdev/vdr-plugin-streamdev_0.5.0~pre20090706+cvs20100307.2102.orig.tar.gz
 
  work fine just compiled with no patches etc?
 
  Honestly I don't know. And that's why using prepackaged set of patches 
  avoid omitting necessary fixes and most of the time going into trouble in 
  general.
 
  BTW: Once configured, xbmc pvr-testing2, works for SD, epg,... but lacks 
  programming feature and fails for me for HDTV. I dunno if my streamdev 
  really works with HDTV or if its the rendering part that is not able to 
  use VDPAU... As vdr record the HDTV streams correctly, I suppose streamdev 
  should only write the TS stream on a socket instead than on the disk.
 
  --eric
 
 Have tried that streamdev, and I'm still getting the same problems.  I only 
 get a picture and audio for a few seconds.
 
 Can you send me your settings from VDR setup.conf?  Here's mine..
 
 streamdev-server.AllowSuspend = 1
 streamdev-server.HTTPBindIP = 127.0.0.1
 streamdev-server.HTTPServerPort = 3000
 streamdev-server.HTTPStreamType = 1
 streamdev-server.IGMPBindIP = 0.0.0.0
 streamdev-server.IGMPClientPort = 1234
 streamdev-server.IGMPStreamType = 0
 streamdev-server.MaxClients = 5
 streamdev-server.ServerPort = 2004
 streamdev-server.StartHTTPServer = 1
 streamdev-server.StartIGMPServer = 0
 streamdev-server.StartServer = 1
 streamdev-server.SuspendMode = 0
 streamdev-server.VTPBindIP = 127.0.0.1

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14

2010-03-27 Thread Goga777
Приветствую, Newsy


for vdr 1714 and rotor you need install the extension patch + rotor patch
from http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13727#post13727


for vdr 1714 and reelchannelscan you should install another patch for 
reelchannelscan
http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13971#post13971

thanks to vdr users from Russian vdr forum - 1455 yuri alex_kag 

Goga


 anybody got vdr 1.7.14 working with rotor plugin + this patch. It's compiling 
 without any probs but when
 I go to rotor menu I cannot select satellite, there always position: 0 and 
 it can't be toggled.
 
 regards
 
 Newsy
 
 --- Goga777 goga...@bk.ru schrieb am So, 7.3.2010:
 
  Von: Goga777 goga...@bk.ru
  Betreff: Re: [vdr] reelchannelscan  rotor plugin don't compile with vdr 
  1.7.13
  An: vdr@linuxtv.org
  Datum: Sonntag, 7. März, 2010 19:02 Uhr
   can someone to create the patch
  for reelchannelscan and rotor plugin for correct compilation
  with vdr
   1.7.13
  
  
  with this patch I could run ver-rotor 0.1.5 with vdr
  1.7.13
  
  thanks to alex_kag 
  http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13727#post13727

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14

2010-03-27 Thread Goga777
Приветствую, Newsy
 Hi Goga,
 
 I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff 

ok


 I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually.

what is vdr-1.7.9-rotor.diff ?

please use extension patch for vdr 1714
http://copperhead.vdr-developer.org/downloads/extensionpatch/ExtP-NG-vdr-1.7.14-V1.diff

uncomment the line for rotor plugin in makefile.config after patching and 
recompile vdr 



Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14

2010-03-27 Thread Goga777
Приветствую, Newsy
 thx Goga for your quick answer but there's no difference after I used 
 extension patch on a clean vdr
 1.7.14.

how did you use extension patch ? please explain how did you patch rotor, vdr 



 
 regards

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14

2010-03-27 Thread Goga777
  I already got rotor plugin patched with rotor-0.1.5-vdr-1.7.13.diff
 
  ok
 
 
  I patched vdr 1.7.14 with vdr-1.7.9-rotor.diff manually.
 
  what is vdr-1.7.9-rotor.diff ?
 
  please use extension patch for vdr 1714
  http://copperhead.vdr-developer.org/downloads/extensionpatch/ExtP-NG-vdr-1.7.14-V1.diff
 
  uncomment the line for rotor plugin in makefile.config after patching and 
  recompile vdr
 
 There's no reason you should have to apply that enormous patch.  Rotor
 support should be made available as a small separate patch.  It's
 really stupid when you're forced to install a bunch of crap you don't
 want/need.

agree
but I don't have separated rotor patch extracted from extension patch

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] timeshift

2010-03-27 Thread Goga777
Hi

with that patch the timeshift works more reliable on slow systems, where 2 
seconds are not enough to fill
up the file enough to start replaying


*** menu.c.orig 2010-02-15 13:15:53.0 +0300
--- menu.c  2010-02-15 12:36:58.0 +0300
***
*** 5476,5482 
Skins.Message(mtStatus, tr(Pausing live video...));
cReplayControl::SetRecording(NULL, NULL); // make sure the new 
cRecordControl will set cReplayControl::LastReplayed()
if (Start(NULL, true)) {
!  sleep(2); // allow recorded file to fill up enough to start replaying
   cReplayControl *rc = new cReplayControl;
   cControl::Launch(rc);
   cControl::Attach();
--- 5476,5482 
Skins.Message(mtStatus, tr(Pausing live video...));
cReplayControl::SetRecording(NULL, NULL); // make sure the new 
cRecordControl will set cReplayControl::LastReplayed()
if (Start(NULL, true)) {
!  sleep(5); // allow recorded file to fill up enough to start replaying
   cReplayControl *rc = new cReplayControl;
   cControl::Launch(rc);
   cControl::Attach();

thanks to Raider05

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan rotor plugin for VDR 1.7.14

2010-03-27 Thread Goga777
 I made a 
 patch -p1 -i ExtP-NG-vdr-1.7.14-V1.diff


ok

 in vdr root dir. then I copied Make.config.template to Make.config, 
 uncommented rotor =1 line

ok

 for rotor I did a 
 patch -p1 -i rotor-0.1.5-vdr-1.7.13.diff from src/rotor dir.

where did you take rotor-0.1.5-vdr-1.7.13.diff ? in 
/usr/src/vdr/PLUGINS/src/rotor/patches there is not
such patch.

you should use the patch rotor-0.1.5-vdr-1.7.13.diff 
from http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13727#post13727


Goga


 all hunks succeeded.
 
 regards
 
 
 Newsy
 
 --- Goga777 goga...@bk.ru schrieb am Sa, 27.3.2010:
 
  Von: Goga777 goga...@bk.ru
  Betreff: Re: [vdr] reelchannelscan  rotor plugin for VDR 1.7.14
  An: vdr@linuxtv.org
  Datum: Samstag, 27. März, 2010 18:47 Uhr
  Приветствую, Newsy
   thx Goga for your quick answer but there's no
  difference after I used extension patch on a clean vdr
   1.7.14.
  
  how did you use extension patch ? please explain how did
  you patch rotor, vdr 

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13

2010-03-27 Thread Goga777
Приветствую, Newsy
 anybody got vdr 1.7.14 working with rotor plugin + this patch. It's compiling 
 without any probs but when
 I go to rotor menu I cannot select satellite, there always position: 0 and 
 it can't be toggled.


do you have /etc/vdr/plugins/rotor.conf with filled positions like this

S5.0E = 0
S7.0E = 0
S9.0E = 9
S10.0E = 0
S13.0E = 13
S16.0E = 0
S19.2E = 19
S28.2E = 0
S28.5E = 0
S36.0E = 36
S39.0E = 39

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] ERROR: driver buffer overflow on device 1

2010-03-21 Thread Goga777
  I have experienced this problem several times today while on HD h264
  channels.  Like previously posted:
 
  Mar 12 15:02:23 vdr: [20675] buffer usage: 70% (tid=20674)
  Mar 12 15:02:24 vdr: [20675] buffer usage: 80% (tid=20674)
  Mar 12 15:02:24 vdr: [20675] buffer usage: 90% (tid=20674)
  Mar 12 15:02:25 vdr: [20675] buffer usage: 100% (tid=20674)
 
  VDR was unresponsive and had to be restarted to fix.
 
  Best regards,
  Derek
 
  Sorry, forgot to mention this is with VDR-1.7.13...
 
 
  I confirm - with vdr 1.7.13 still have the same issue
 
  I assume, you both use vdr-xine. It would be a good idea to
  create a backtrace in that situation to rule out vdr-xine as
  source of this issue.
  
  yes, I'm using the vdr-xine 093
  please advice how should I use backtrace
 
 When VDR is unresponsive, type something like that:
 
   gdb /path/to/vdr `pidof vdr`
 
 At the gdb prompt, issue the following command:
 
   thread apply all bt
 
 and provide the output.


but with my buffer overflow problem the vdr is working without any deadlock. I 
can such messages only in
syslog. That's why I can't do backtrace 

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] ERROR: driver buffer overflow on device 1

2010-03-14 Thread Goga777
  I have experienced this problem several times today while on HD h264
  channels.  Like previously posted:
 
  Mar 12 15:02:23 vdr: [20675] buffer usage: 70% (tid=20674)
  Mar 12 15:02:24 vdr: [20675] buffer usage: 80% (tid=20674)
  Mar 12 15:02:24 vdr: [20675] buffer usage: 90% (tid=20674)
  Mar 12 15:02:25 vdr: [20675] buffer usage: 100% (tid=20674)
 
  VDR was unresponsive and had to be restarted to fix.
 
  Best regards,
  Derek
 
  Sorry, forgot to mention this is with VDR-1.7.13...
  
  
  I confirm - with vdr 1.7.13 still have the same issue
 
 I assume, you both use vdr-xine. It would be a good idea to
 create a backtrace in that situation to rule out vdr-xine as
 source of this issue.


yes, I'm using the vdr-xine 093
please advice how should I use backtrace

thanks

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] Can't start Transfer Mode and (device.c, 1940): Bad file descriptor

2010-03-14 Thread Goga777
Hi

with vdr 1713 + cvs streamdev I sometimes have the error

ERROR: Can't start Transfer Mode! 
ERROR (device.c,1940): Bad file descriptor


it happened while I tried to switch on another channel from other satellite, 
than previous.


Mar 14 23:51:13 localhost vdr: [7607] switching to channel 2
Mar 14 23:51:13 arvdr vdr: [4811] TS buffer on device 1 thread ended (pid=3346, 
tid=4811)
Mar 14 23:51:13 arvdr vdr: [4810] buffer stats: 21432 (0%) used
Mar 14 23:51:13 arvdr vdr: [4810] receiver on device 1 thread ended (pid=3346, 
tid=4810)
Mar 14 23:51:13 arvdr vdr: [5009] receiver on device 1 thread started 
(pid=3346, tid=5009)
Mar 14 23:51:13 arvdr vdr: [5009] receiver on device 1 thread started 
(pid=3346, tid=5009)
Mar 14 23:51:13 arvdr vdr: [5010] TS buffer on device 1 thread started 
(pid=3346, tid=5010)
Mar 14 23:51:13 arvdr vdr: [4806] streamdev-livestreaming thread ended 
(pid=3346, tid=4806)
Mar 14 23:51:13 arvdr vdr: [5010] TS buffer on device 1 thread ended (pid=3346, 
tid=5010)
Mar 14 23:51:13 arvdr vdr: [5009] buffer stats: 0 (0%) used
Mar 14 23:51:13 arvdr vdr: [5009] receiver on device 1 thread ended (pid=3346, 
tid=5009)
Mar 14 23:51:13 arvdr vdr: [4805] streamdev-writer thread ended (pid=3346, 
tid=4805)
Mar 14 23:51:13 arvdr vdr: [3357] buffer stats: 54520 (1%) used
Mar 14 23:51:13 localhost vdr: [8684] ERROR (device.c,1940): Bad file descriptor
Mar 14 23:51:13 arvdr vdr: [3357] buffer stats: 0 (0%) used
Mar 14 23:51:13 localhost vdr: [8684] TS buffer on device 10 thread ended 
(pid=7607, tid=8684)
Mar 14 23:51:13 localhost vdr: [8685] buffer stats: 54144 (2%) used
Mar 14 23:51:13 localhost vdr: [8685] receiver on device 10 thread ended 
(pid=7607, tid=8685)
Mar 14 23:51:15 localhost vdr: [7607] Streamdev: Lost connection to 
192.168.9.254:2004: Connection timed out
Mar 14 23:51:15 localhost vdr: [7607] ERROR: Can't start Transfer Mode!
Mar 14 23:51:16 arvdr vdr: [3357] Streamdev: Accepted new client (VTP) 
192.168.9.88:50583
Mar 14 23:51:16 arvdr vdr: [3357] streamdev: too many clients, rejecting 
192.168.9.88:50583
Mar 14 23:51:16 arvdr vdr: [3357] client (VTP) 192.168.9.88:37193 has closed 
connection
Mar 14 23:51:16 arvdr vdr: [3357] streamdev: closing streamdev connection to 
192.168.9.88:37193
Mar 14 23:51:16 arvdr vdr: [3357] buffer stats: 0 (0%) used
Mar 14 23:51:16 arvdr vdr: [4803] streamdev-filterstreaming thread ended 
(pid=3346, tid=4803)
Mar 14 23:51:16 arvdr vdr: [4802] streamdev-writer thread ended (pid=3346, 
tid=4802)
Mar 14 23:51:16 arvdr vdr: [3357] buffer stats: 0 (0%) used
Mar 14 23:51:16 arvdr vdr: [3357] streamdev: closing streamdev connection to 
192.168.9.88:50583
Mar 14 23:51:16 localhost vdr: [8682] ERROR: Streamdev: Didn't receive greeting 
from 192.168.9.254:2004
Mar 14 23:51:17 localhost vdr: [8682] cStreamdevFilters::Action(): stream 
disconnected ?
Mar 14 23:51:19 localhost vdr: [8682] Streamdev: Lost connection to 0.0.0.0:0: 
Connection timed out
Mar 14 23:51:19 localhost vdr: [8681] TS buffer on device 1 thread ended 
(pid=7607, tid=8681)
Mar 14 23:51:19 localhost vdr: [8682] buffer stats: 72004 (6%) used
Mar 14 23:51:19 localhost vdr: [8682] StreamdevFilters::Action() ended
Mar 14 23:51:19 localhost vdr: [8682] streamdev-client: sections assembler 
thread ended (pid=7607, tid=8682)
Mar 14 23:51:20 localhost kernel: [ 8643.236164] [drm] Num pipes: 1
Mar 14 23:51:23 arvdr vdr: [3350] frontend 0/0 timed out while tuning to 
channel 2, tp 112207

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] ERROR: driver buffer overflow on device 1

2010-03-13 Thread Goga777
  I have experienced this problem several times today while on HD h264
  channels.  Like previously posted:
 
  Mar 12 15:02:23 vdr: [20675] buffer usage: 70% (tid=20674)
  Mar 12 15:02:24 vdr: [20675] buffer usage: 80% (tid=20674)
  Mar 12 15:02:24 vdr: [20675] buffer usage: 90% (tid=20674)
  Mar 12 15:02:25 vdr: [20675] buffer usage: 100% (tid=20674)
 
  VDR was unresponsive and had to be restarted to fix.
 
  Best regards,
  Derek
 
 Sorry, forgot to mention this is with VDR-1.7.13...


I confirm - with vdr 1.7.13 still have the same issue

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13

2010-03-07 Thread Goga777
 can someone to create the patch for reelchannelscan and rotor plugin for 
 correct compilation with vdr
 1.7.13


with this patch I could run ver-rotor 0.1.5 with vdr 1.7.13

thanks to alex_kag 
http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=13727#post13727

Goga
diff -u orig/rotor-0.1.5/menu.c rotor-0.1.5/menu.c
--- orig/rotor-0.1.5/menu.c	2009-10-04 14:54:22.0 +0300
+++ rotor-0.1.5/menu.c	2010-03-06 22:42:23.0 +0200
@@ -139,7 +139,8 @@
   RotorPos=RotorPositions.GetfromSource(OldChannel-Source());
   Position=RotorPos-GetPos();
   Frequenz=OldChannel-Frequency();
-  if ((*OldChannel).Polarization() == 'v' || (*OldChannel).Polarization() == 'V')
+  cDvbTransponderParameters dtp((*OldChannel).Parameters());
+  if (dtp.Polarization() == 'v' || dtp.Polarization() == 'V')
 Pol='V';
   else
 Pol='H';
Общие подкаталоги: orig/rotor-0.1.5/patches и rotor-0.1.5/patches
Общие подкаталоги: orig/rotor-0.1.5/po и rotor-0.1.5/po
diff -u orig/rotor-0.1.5/rotor.c rotor-0.1.5/rotor.c
--- orig/rotor-0.1.5/rotor.c	2009-10-04 15:10:26.0 +0300
+++ rotor-0.1.5/rotor.c	2010-03-05 23:07:52.0 +0200
@@ -93,7 +93,7 @@
   {
 if ((source-Code()  0xC000) != 0x8000)
   continue;
-if ((diseqc=Diseqcs.Get(source-Code(),12000,'h')) || (diseqc=Diseqcs.Get(source-Code(),12000,'v')) || (diseqc=Diseqcs.Get(source-Code(),12000,'l')) || (diseqc=Diseqcs.Get(source-Code(),12000,'r'))) 
+if ((diseqc=Diseqcs.Get(0,source-Code(),12000,'h')) || (diseqc=Diseqcs.Get(0,source-Code(),12000,'v')) || (diseqc=Diseqcs.Get(0,source-Code(),12000,'l')) || (diseqc=Diseqcs.Get(0,source-Code(),12000,'r'))) 
 {
   char *c=strdup(diseqc-Commands());
   while (c = strchr(c, '['))
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] reelchannelscan rotor plugin don't compile with vdr 1.7.13

2010-03-05 Thread Goga777
hi

can someone to create the patch for reelchannelscan and rotor plugin for 
correct compilation with vdr
1.7.13


arvdr:/usr/src/vdr-1.7.13/PLUGINS/src/reelchannelscan# make all
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -D_GNU_SOURCE 
-DPLUGIN_NAME_I18N='reelchannelscan' -DVDRDIR=\../../..\ 
-DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -D__KERNEL_STRICT_NAMES 
-I../s2-liplianin/linux/include -I../../../include 
-I../../../s2-liplianin/linux/include scan.c
scan.c: In member function ‘void cScan::ScanDVB_S(cTransponder*, cChannel*)’:
scan.c:523: error: ‘class cChannel’ has no member named ‘Modulation’
scan.c:523: error: ‘class cChannel’ has no member named ‘CoderateH’
make: *** [scan.o] Ошибка 1



arvdr:/usr/src/vdr-1.7.13/PLUGINS/src/rotor# make all
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -D_GNU_SOURCE 
-DPLUGIN_NAME_I18N='rotor' -I../s2-liplianin/linux/include 
-I../../..//include -I../s2-liplianin/linux/include rotor.c
rotor.c: In member function ‘virtual bool cPluginRotor::Start()’:
rotor.c:96: error: no matching function for call to ‘cDiseqcs::Get(int, int, 
char)’
../../..//include/vdr/diseqc.h:63: note: candidates are: cDiseqc* 
cDiseqcs::Get(int, int, int, char)
rotor.c:96: error: no matching function for call to ‘cDiseqcs::Get(int, int, 
char)’
../../..//include/vdr/diseqc.h:63: note: candidates are: cDiseqc* 
cDiseqcs::Get(int, int, int, char)
rotor.c:96: error: no matching function for call to ‘cDiseqcs::Get(int, int, 
char)’
../../..//include/vdr/diseqc.h:63: note: candidates are: cDiseqc* 
cDiseqcs::Get(int, int, int, char)
rotor.c:96: error: no matching function for call to ‘cDiseqcs::Get(int, int, 
char)’
../../..//include/vdr/diseqc.h:63: note: candidates are: cDiseqc* 
cDiseqcs::Get(int, int, int, char)
make: *** [rotor.o] Ошибка 1





___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] log of diseqc commands (rotor plugin)

2010-02-26 Thread Goga777
Приветствую, mike

 did you gety your log of diseqc stuff for rotor. 

not

if not let me know and I'll send you mine

yes, please send it

thanks a lot

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] log of diseqc commands (rotor plugin)

2010-02-23 Thread Goga777
Hi

does it possible to log the  diseqc command from rotor plugin ?


Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] log of diseqc commands (rotor plugin)

2010-02-23 Thread Goga777
  does it possible to log the  diseqc command from rotor plugin ?
 
 Why wouldn't it be possible?  Just add some isyslog's in the code.


would you please send the patch for it 


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] Channel not available - vdr 1.7.12 + streamdev

2010-02-13 Thread Goga777
Hi

I'm using vdr 1712 + patched cvs streamdev + xbmc pvr-testing2.

While watching some dvb channels on xbmc I can see in vdr log strange logs as

Feb 13 15:40:55 arvdr vdr: [2154] switching to channel 22
Feb 13 15:40:55 arvdr vdr: [2154] info: Channel not available!

really I can watch this channel on xbms without any problem

more details is here
http://pastebin.com/m1378ef32

Goga



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] vdr 1.7.12 - TS continuity error

2010-02-13 Thread Goga777
Hi

I have vdr 1712 + vdr-xine 093 

during of watching regular mpeg2 channels sometimes the sound is disappeared 
and in the logs I can see


Feb 13 21:31:06 arvdr logger: fixing sound card drift by 1352 pts
Feb 13 21:31:07 arvdr logger: 200 frames delivered, 0 frames skipped, 4 frames 
discarded
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (2)
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (6)
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (8)
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (4)
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (0)
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (2)
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (0)
Feb 13 21:38:17 arvdr vdr: [2884] 3 cRepacker messages suppressed
Feb 13 21:38:17 arvdr vdr: [2884] cAudioRepacker(0xC0): skipped 572 bytes while 
syncing on next audio frame
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (6)
Feb 13 21:38:17 arvdr vdr: [2884] TS continuity error (10)
Feb 13 21:38:17 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() 
SNDRV_PCM_IOCTL_DELAY failed.
Feb 13 21:38:17 arvdr logger: fixing sound card drift by 2413 pts
Feb 13 21:38:17 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() 
SNDRV_PCM_IOCTL_DELAY failed.
Feb 13 21:38:17 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() 
SNDRV_PCM_IOCTL_DELAY failed.
Feb 13 21:38:18 arvdr logger: fixing sound card drift by 1956 pts
Feb 13 21:38:19 arvdr logger: fixing sound card drift by 1466 pts
Feb 13 21:38:29 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() 
SNDRV_PCM_IOCTL_DELAY failed.
Feb 13 21:38:29 arvdr logger: fixing sound card drift by 1250 pts
Feb 13 21:38:29 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() 
SNDRV_PCM_IOCTL_DELAY failed.
Feb 13 21:38:35 arvdr logger: pcm_hw.c: snd_pcm_hw_delay() 
SNDRV_PCM_IOCTL_DELAY failed.
Feb 13 21:39:16 arvdr last message repeated 2 times
Feb 13 21:39:16 arvdr logger: fixing sound card drift by 1293 pts

the full log here's 
http://pastebin.com/m413ba15d





___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] xbmc pvr + streamdev

2010-02-10 Thread Goga777
Hi

with new patch for cvs streamdev 
http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/

I couldn't install streamdev-cvs221109-AddFemonV1.diff 

the rejects here are
http://pastebin.com/m10662b78

second question

here is my streamdev settings. Do they correct ?
what about streamdev-server.AllowSuspend = 0 ?


streamdev-server.AllowSuspend = 0
streamdev-server.HTTPBindIP = 0.0.0.0
streamdev-server.HTTPServerPort = 3000
streamdev-server.HTTPStreamType = 0
streamdev-server.IGMPBindIP = 0.0.0.0
streamdev-server.IGMPClientPort = 1234
streamdev-server.IGMPStreamType = 0
streamdev-server.MaxClients = 1
streamdev-server.ServerPort = 2004
streamdev-server.StartHTTPServer = 0
streamdev-server.StartIGMPServer = 0
streamdev-server.StartServer = 1
streamdev-server.SuspendMode = 1
streamdev-server.VTPBindIP = 0.0.0.0

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] vdr 1.7.12 - issue with some mpeg2 channels (cVideoRepacker: switching to MPEG1/2 mode)

2010-02-09 Thread Goga777

thank you very much for your patch. Now everything is ok.

  I can only reproduce this issue on channels with separate PCR
  pid. I'll have to investigate further to find a solution.
  
  As of version 1.7.12 VDR records the PCR pid if it is different
  than the video PID. For lack of better knowledge I made cDevice::PlayTs()
  send the PCR packets to PlayTsVideo(). The FF cards don't have a problem
  with that, but maybe xine or the cVideoRepacker does.
  Maybe VDR shouldn't even replay the PCR data - please advise.
 
 As it is possible to access cPatPmtParser since a few releases,
 I've changed vdr-xine to pull VPID from there instead of picking
 it from packets passed to PlayTsVideo.



-- 
Удачи,
Игорь

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] vdr 1.7.12 - issue with some mpeg2 channels (cVideoRepacker: switching to MPEG1/2 mode)

2010-02-08 Thread Goga777
Hi

my configuration is 

vdr 1712 + vdr-xine 093 + xine-lib-1.2 HG + Geforce 8400 card with vdpau

with some dvb-s mpeg2 channels I and others vdr users  have jerky video
the sample you can download from 
http://vdr-settings.com/goga/sample_video.tar.bz2

In vdr/xine/vdr-xine logs I can see following 


Feb  8 21:16:31 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:31 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:33 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:33 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:33 arvdr logger: video jump
  
Feb  8 21:16:35 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:35 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:38 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:38 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:43 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:43 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:46 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:46 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:48 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:48 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:51 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:51 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:53 arvdr vdr: [2547] Text2Skin: menu display update thread started 
(pid=2145, tid=2547)  
Feb  8 21:16:55 arvdr logger: video_out: throwing away image with pts 11991425 
because it's too old (diff : 5853).
Feb  8 21:16:57 arvdr logger: video_out: throwing away image with pts 12139618 
because it's too old (diff : 5204).
Feb  8 21:16:57 arvdr logger: 200 frames delivered, 0 frames skipped, 2 frames 
discarded  
Feb  8 21:16:57 arvdr logger: video_out: throwing away image with pts 12157643 
because it's too old (diff : 5231).
Feb  8 21:16:57 arvdr vdr: [2547] Text2Skin: menu display update thread ended 
(pid=2145, tid=2547)
Feb  8 21:16:57 arvdr logger: video_out: throwing away image with pts 12190072 
because it's too old (diff : 5215).
Feb  8 21:16:58 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:58 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode 
  
Feb  8 21:16:59 arvdr vdr: [2548] Text2Skin: channelInfo display update thread 
started (pid=2145, tid=2548)   
Feb  8 21:16:59 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2 mode 
  
Feb  8 21:16:59 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2 mode  

full log here is 
http://pastebin.com/m4afd26e6


vdr-xine log

-
MakePrimaryDevice: 1
=
SetVideoFormat: 1
SetVolumeDevice: 255
SetAudioChannelDevice: 0
SetVolumeDevice: 255
SetPlayMode: 1
SetDigitalAudioDevice: 0
frame: (0, 0)-(-1, -1), zoom: (1.00, 1.00)
vdr-xine: Client connecting ...
vdr-xine: Client connected!
[AM]
DiscontinuityDetected: triggering soft start
[aAMMM
MM
MM
MM

Re: [vdr] vdr 1.7.12 - issue with some mpeg2 channels (cVideoRepacker: switching to MPEG1/2 mode)

2010-02-08 Thread Goga777
no any problem with vdr 179

 my configuration is 
 
 vdr 1712 + vdr-xine 093 + xine-lib-1.2 HG + Geforce 8400 card with vdpau
 
 with some dvb-s mpeg2 channels I and others vdr users  have jerky video
 the sample you can download from 
 http://vdr-settings.com/goga/sample_video.tar.bz2
 
 In vdr/xine/vdr-xine logs I can see following 
 
 
 Feb  8 21:16:31 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2
 mode Feb  8 21:16:31 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2
 mode Feb  8 21:16:33 arvdr vdr: [2544] cVideoRepacker: switching to MPEG1/2
 mode Feb  8 21:16:33 arvdr vdr: [2544] cVideoRepacker: operating in MPEG1/2
 mode Feb  8 21:16:33 arvdr logger: video

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] can't compile femon 1.7.5 with vdr 1.7.12

2010-01-31 Thread Goga777
/usr/src/vdr/PLUGINS/src/femon# make all
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -Wall -march=athlon-xp 
-pipe -fomit-frame-pointer -fPIC -c -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE 
-D_LARGEFILE64_SOURCE -D_GNU_SOURCE -DPLUGIN_NAME_I18N='femon' 
-I../s2-liplianin/linux/include -I../../../include femonosd.c
femonosd.c: In member function ‘bool cFemonOsd::DeviceSwitch(int)’:
femonosd.c:724: error: no matching function for call to 
‘cTransferControl::cTransferControl(cDevice*, tChannelID, int, const int*, 
const int*, const int*)’
../../../include/vdr/transfer.h:33: note: candidates are: 
cTransferControl::cTransferControl(cDevice*, const cChannel*)
../../../include/vdr/transfer.h:28: note: 
cTransferControl::cTransferControl(const cTransferControl)
make: *** [femonosd.o] Ошибка 1

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] streamdev for xbmc testing-pvr2

2010-01-25 Thread Goga777
 Is that working well ? I am using the vdr-team + henningpingel repo, but
 still have freezing problems 
 (xbmc goes to +/- 100% cpu) when changing channels in about 30% of the
 cases.

I have the same freezing problem with svn pvr-testing2 + non patched vdr 1711 + 
cvs streamdev with patches
from

http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/


I have sent my bug report to xbmc forum - let's see the answer from developers
http://xbmc.org/forum/showthread.php?t=45314page=51

 
 Could you tell me where to find the patches for streamdev. I can find some

http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/streamdev-cvs221109-AddFemonV1.diff?view=log
http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/streamdev-cvs221109-AddCallbackMsg.diff?view=log
http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/streamdev-cvs170110-allowStopRecording.patch?view=log
http://xbmc.svn.sourceforge.net/viewvc/xbmc/branches/pvr-testing2/xbmc/pvrclients/vdr-streamdev/patches/streamdev-cvs170110-VDR1.7.11ParentalRating.patch?view=log


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] streamdev for xbmc testing-pvr2

2010-01-22 Thread Goga777
  does support cvs version of streamdev plugin the xbmc testing-pvr2 
  branch ? or only http://streamdev.vdr-developer.org/snapshots/vdr-
  streamdev-0.5.0-pre-20090706.tgz will be good for xbmc pvr2 ?
 
 The snapshot has been taken right after adding xbmc support to streamdev-cvs.
 Of course you can take a recent cvs version, too.

I would like to run svn pvr2 branch + cvs streamdev + vdr 1.7.11
does it possible at all ?
which patches should I install ?

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] streamdev for xbmc testing-pvr2

2010-01-22 Thread Goga777
 I am using that version of streamdev with pvr-testing2 ok.
 This is my setup:
 
 Streamdev plugin for XBMC
 http://streamdev.vdr-developer.org/
 
 http://streamdev.vdr-developer.org/snapshots/vdr-streamdev-0.5.0-pre-200
 90706.tgz
 
 
 
 PVR testing version of XBMC
 http://www.xbmc.org/forum/showthread.php?t=45314highlight=pvr
 
 svn checkout
 http://xbmc.svn.sourceforge.net/svnroot/xbmc/branches/pvr-testing2
 
 
 
 Patch VDR 1.7.7 with extensions (for Streamdev extension and parental
 rating)
 http://www.zulu-entertainment.de/
 
 http://www.zulu-entertainment.de/page/klick.php?d=VDR+Extensions+Patch
 
 
 cp Make.config.template Make.config
 
 
 Edit make.config enabling:
 
 PARENTALRATING = 1
 STREAMDEVEXT = 1
 Other patches not required for XBMC.
 
 The parental rating patch just gives nice colouring on the epg for tv show 
 categories.
 
 Development is very active and shows much promise. Disappointing 
 deinterlacing though. There is good
 support for VDPAU but with only half rate temporal. I believe there is the 
 intention to support full
 rate deinterlacing... eventually.

several days ago the xbmc developers have added in trunk the support of full 
rate temporal and
temporal_spatial. You can test them.

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] streamdev for xbmc testing-pvr2

2010-01-15 Thread Goga777
Hi

does support cvs version of streamdev plugin the xbmc testing-pvr2 branch ?
or only 
http://streamdev.vdr-developer.org/snapshots/vdr-streamdev-0.5.0-pre-20090706.tgz
 will be good for
xbmc pvr2 ?

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Cannot compile vdr-plugin-streamdev from today cvs against vdr 1.7.11

2010-01-10 Thread Goga777
 server/connectionVTP.c: In member function ‘bool cLSTEHandler::Next(bool)’:
 server/connectionVTP.c:303: error: ‘const class cEvent’ has no member 
 named ‘GetContentsString?’
 server/connectionVTP.c:304: error: ‘const class cEvent’ has no member 
 named ‘GetContentsString?’
 make: *** [server/connectionVTP.o] Error 1


I could compile cvs version of streamdev plugin  and vdr 1.7.11 without any 
problem
http://streamdev.vdr-developer.org/


Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers

2010-01-05 Thread Goga777
Hi

according of discussion in Official linux kernel mailing list
http://www.gossamer-threads.com/lists/linux/kernel/1173758#

in 2.6.34 kernel we will have Crystal HD driver 

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers

2010-01-04 Thread Goga777
 I wish we could get away from xine. 

how ? does it possible at all ?

 VDR/VDPAU/XINE/XORG. End up with lots of problems, change channels oo 
 fast, somthing crashes, weak signal, something crashes, FF/RW speed 
 changing sometimes crashes, with all the buffering, get slow channel 
 change, slow responce to pause, RW/FF and lots of lip sync problems. 
 Need to reduce some middle ware.
 
 On 1/3/2010 1:08 PM, gimli wrote:
  Hello,
 
  i use it with vdr 1.7.10, xine-lib-1.2, vdr-xine, and the xine decoder
  plugin i wrote at :
 
  http://sourceforge.net/apps/trac/archvdr/browser/branches/libcrystalhd
 
  cu
 
  Edgar (gimli) Hucek
 
  Michael Stepanov schrieb:
  Does somebody use it to watch HD channels with VDR? As I understand that
  solution can give the same result as nVidia Ion?
 
  On Sat, Jan 2, 2010 at 8:29 PM, Manu Abraham abraham.m...@gmail.com
  wrote:
 
  On Sat, Jan 2, 2010 at 10:06 PM, Timothy D. Lenz tl...@vorgon.com
  wrote:
  Problem is, that is just a chip. Any boards out using it? Linux
  drivers?
  It is not a single chip. It is a combination of 2 chips. The card will
  be available soon from Azurewave
 
  ___

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] VDR to IPBOX9000HD?

2010-01-03 Thread Goga777
Приветствую, Katty
 I read about porting VDR to IPBOX 9000HD (STi710x)
 locking for more informations about this project


have a look please
http://www.mail-archive.com/vdr@linuxtv.org/msg11392.html

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers

2010-01-02 Thread Goga777
  I just share something I read on the XBMC [1] Web site.
  The Broadcom Crystal HD Hardware Decoder (BCM970012) seems to be an
  alternative for HD playback with free drivers [2]. You can get it at as
  an mini-PCIE card at eBay for 22 $ [3].
 
 I'd recommend the BCM70015, which is the better part.

where is it possible to buy it ?

 It works as a decoder only, making YUV 4:2:2 frames available, which
 must then be blitted to whatever output framebuffer setup you have,
 over the pci express bus. The API seems very straightforward, much
 simpler that VDPAU, thus one could get a HW accelerated H.264 setup
 without X11.


what about of corrected interlace output ? Most of them videocards can't  do it 
correctly


Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers

2010-01-02 Thread Goga777
  I just share something I read on the XBMC [1] Web site.
  
  The Broadcom Crystal HD Hardware Decoder (BCM970012) seems to be an
  alternative for HD playback with free drivers [2]. You can get it at as
  an mini-PCIE card at eBay for 22 $ [3].
  
   If this is all true in my opinion these are fantastic news.
 
 This is great news indeed.
 In the comments someone mentions this motherboard:
 
 http://www.intel.com/products/desktop/motherboards/D510MO/D510MO-overview.htm
 
 It can be passively cooled, has a pci and a mini pci-e slot, but it 
 lacks hdmi.

have a look at 
Intel® Desktop Board D945GSEJT
http://www.intel.com/products/desktop/motherboards/D945GSEJT/D945GSEJT-overview.htm


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers

2010-01-02 Thread Goga777
  what about of corrected interlace output ? Most of them videocards can't  
  do it correctly
 
 I can't answer that unfortunately.

let's hope that Crystal HD can do deinterlacing and scaling


in crystalhd/include/7411d.h there's lines 

/* scaling on/off */
/*  - eCMD_C011_DEC_CHAN_OUTPUT_FORMAT */
typedef enum
{
eC011_SCALING_OFF   = 0x,
eC011_SCALING_ON= 0x0001,

} eC011_SCALING;

/* deinterlacing on/off */
/*  - eCMD_C011_DEC_CHAN_OUTPUT_FORMAT */
typedef enum
{
eC011_DEINTERLACING_OFF = 0x,
eC011_DEINTERLACING_ON  = 0x0001,

} eC011_DEINTERLACING;

/* deinterlacing on/off */
/*  - eCMD_C011_DEC_CHAN_OUTPUT_FORMAT */
typedef enum
{
eC011_DEINTERLACING_OFF = 0x,
eC011_DEINTERLACING_ON  = 0x0001,

} eC011_DEINTERLACING;



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [OT] mini-PCIE with Broadcom Crystal HD Hardware Decoder (BCM970012) for HD playback with free drivers

2010-01-02 Thread Goga777
Приветствую, Timothy
 Problem is, that is just a chip. Any boards out using it? Linux drivers?

no. it's pci-e mini board with chip and Linux open source driver 
http://www.broadcom.com/docs/support/crystalhd/crystalhd_linux_20091229.zip


 Torgeir Veimo wrote:
  2010/1/2 Paul Menzel paulepan...@users.sourceforge.net:
  I just share something I read on the XBMC [1] Web site.
 
  The Broadcom Crystal HD Hardware Decoder (BCM970012) seems to be an
  alternative for HD playback with free drivers [2]. You can get it at as
  an mini-PCIE card at eBay for 22 $ [3].
  
  I'd recommend the BCM70015, which is the better part.
  
  It works as a decoder only, making YUV 4:2:2 frames available, which
  must then be blitted to whatever output framebuffer setup you have,
  over the pci express bus. The API seems very straightforward, much
  simpler that VDPAU, thus one could get a HW accelerated H.264 setup
  without X11.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] Recommendation for new hd vdr system.

2009-11-14 Thread Goga777
  The asus P5N7A-VM motherboard seems a good candidate, is its 
  integrated  9300 graphics powerful enough for good deinterlacing?
 
 
  Mmmh, I hate to reply to my own message, but it seems it isn't 
  available anywhere, at least here in Spain :-(
 I'm just at the same task at the moment.
 
 Vdpau enabled IGP motherboards except ION systems seem not to be 
 available at all for some reason.
 
 Same for passive Nvidia GT220 cards (not yet available (Zotac Zone 
 Edition or ECS)).

agree

П210 or Gt220 or new ION2 can be good choice 



Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] rotor plugin puzzling question

2009-11-12 Thread Goga777
 I think the rotor plugin is a bit of a mess now and the latest version (1.5) 
 is a step backwards with no transponder scan facility.
 
 A clever friend of mine has doctored the previous version to work with 
 vdr-1.7.9, to still scan transponders and better still to scan C-band 
 transponders. Rotor switches diseqc off it appears and VDR defaults to Ku 
 settings so all c-band appears to be out of rangeanyone else have this 
 problem?


may the best solution - to use vdr-reelchannelscan ? nor rotor ?

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] rotor plugin puzzling question

2009-11-12 Thread Goga777
I couldn't apply a patch 


/usr/src/vdr/PLUGINS/src/rotor-0.1.5# cat patch1 | patch -p0 --dry-run
patching file rotor.c
patch:  malformed patch at line 6: 
(diseqc=Diseqcs.Get(source-Code(),12000,'v')) ||


any clue ?

 Is it just me or the newly released rotor plugin for vdr 1.7.9 needs the
 following patch to the plugin itself in order to run (although it compiles
 fine without it)
 If the author reads these lines I would love to know why...
 
 --- rotor.c.old   2006-06-14 23:44:27.0 +0200
 +++ rotor.c   2006-06-14 23:46:43.0 +0200
 @@ -96,7 +96,8 @@
continue;
  if ((diseqc=Diseqcs.Get(source-Code(),12000,'h')) ||
 (diseqc=Diseqcs.Get(source-Code(),12000,'v')) ||
 (diseqc=Diseqcs.Get(source-Code(),12000,'l')) ||
 (diseqc=Diseqcs.Get(source-Code(),12000,'r'))) 
  {
 -  char *c=strdup(diseqc-Commands());
 +  char *commandstring=strdup(diseqc-Commands());
 +  char *c=commandstring;  
while (c = strchr(c, '['))
{
  char *e = strchr(++c, ']');
 @@ -131,7 +132,7 @@
break;
  }
}
 -  free(c);
 +  free(commandstring);
  }
  cRotorPos *p = RotorPositions.GetfromSource(source-Code());
  if (p==RotorPositions.First())

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] vdr-rotor-0.1.5

2009-11-10 Thread Goga777
http://home.vrweb.de/~bergwinkl.thomas/downro/vdr-rotor-0.1.5.tgz
vdr-rotor for vdr 179 

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] strange issue with DVB-S2 and VDPAU

2009-11-10 Thread Goga777
  wrong modulation - should be everytime S1 and O35 or O25
 The channels.conf was as vdr generated it, but I tried different 
 modifications, so maybe that time I changed the modulation, but it didn't 
 helped.
 
  read please man vdr about this parameters
 Believe me, I read it very often, and I had read about channels.conf 
 parameters not in the vdr manual but on the german wiki.
 
  please try to use roll-off factor = 0,35 (as here - O35)
 I tried.
 
 
 I also installed vdr-reelchannelscan plugin, it generated a new 
 channels.conf, but my image remanined broken, and log was full with TS 
 continuity error.
 One thing: I was wrong about that single FTA radio channel from Hello HD 
 packet: it's also not working, I can hear only some glitches if I tune to..

what about of LOCK - do you have permanent stable LOCK ?
have you any figures concerning of SNR BER ?


Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] strange issue with DVB-S2 and VDPAU

2009-11-09 Thread Goga777
 After 4 yeras of SD-VDR I tried to move to HD with my VDR box.
 
 Current hardware:
 Asus M3N78-VM with GF9400
 Athlon BE2350
 TT3200 DVB-S2
 
 Software:
 Ubuntu 9.04 x86
 S2API drivers from linuxtv.org/hg/v4l-dvb hg
 xine-vdpau
 xine-ui cvs
 plain vdr-1.7.9

are you using vdr-xine plugin 093 or vdr-xineliboutput ? which version ?

 I'm mainly focused on S9.0E source, because I have a Conax subscription 
 for Hello HD package (http://www.lyngsat.com/packages/hello.html)

 
 After the first install and some finetunings, FTA HD channels (M2HD, Luxe 
 HD) worked well,

what about another FTA channels from 9E - are they working fine ?


 but I had broken image on Hello HD channels (on SD and HD 
 as well, all of them are in DVB-S2 Mpeg4), and log was full with TS 
 continuity error. My channels list was generated with w_scan. 


you can try to scan with patched for s2api reelchannelscan vdr plugin - see my 
announce in this ML

After a 
 while I realized that if I let vdr to update my channel.conf, all the 
 channels are working fine.
 And then came the disaster. Ubuntu said that 9.10 is available, and I 
 choosed 
 to upgrade. 

it was your fault 


After the upgrade I had no sound at all on my system. As I 
 saw, many others had this problem with Ubuntu 9.10.

yep

 After a day and a half 
 I managed to fix the sound (compiling alsa, etc), but the TS continuity 
 error came back on vdr.
 Since then I tried everything, I reinstalled the dvb drivers, xine-lib, 
 xine-ui, I tried vdr-xine plugin and xineliboutput also, but no luck: i 
 have broken image on Hello HD package.


what about of 5 FTA channels ?

 I also tried to make some records from those channels without any output 
 plugin, and I end up with 0 sized recordings (on other channels 
 recordings are fine), so IMHO this has nothing to do with xine.
 I'm suspecting two things:
 1. DVB drivers.
 2. Incorrect channels.conf
 
 Reinstalling dvb drivers from liplianin did not help, nor various 
 channels.conf's
 
 One more detail: I have a Kathrein UFS-910 linux receiver. I have two 
 systems on that: the original firmware and Enigma2. If I try my Conax card 
 in the Kathy, everything works well under E2, but in the original firmware 
 I had the same broken image issue as with VDR.
 
 As I am stuck with this for more than a day, any help or any ideas are 
 welcomed.

show please your channels.conf
try patched vdr-channelscan


Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] strange issue with DVB-S2 and VDPAU

2009-11-09 Thread Goga777
 My channels.conf:

your channels list is wrong

wrong modulation - should be everytime S1 and O35 or O25 


read please man vdr about this parameters 

 m1 HD;HD 
 Platform:12034:vC34M5O0S1:S9.0E:27500:320=27:0;321=hun:0:BAA:4:158:6600:0
 Filmbox Extra;HD 
 Platform:12034:vC34M5O0S0:S9.0E:27500:656=2:657=hun:0:BAA,B00:25:158:6600:0
 HirTV;HD 
 Platform:12034:vC34M5O0S0:S9.0E:27500:672=27:673=hun:676:BAA:26:158:6600:0

please try to use roll-off factor = 0,35 (as here - O35) 

HD-Test ARD ZDF;IRT:11361:hC23M5O35S1:S19.2E:22000:0:0:0:0:11140:1:1011:0

or

O25

as here 

HD4 TEST;Poverkhnost 
TV:12111:HC34M5O25S1:S36.0E:27500:1213=27:1313=eng:0:654,500:3213:878:12100:0

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] xineliboutput.OSD.Blending = 1 or 0

2009-11-02 Thread Goga777
Hi

how can I recognize - does support my Geforce 8400 card the osd blending 
hardware method or not in vdr-xineliboutput ?

xineliboutput.OSD.Blending = 1
xineliboutput.OSD.BlendingLowRes = 0


Goga



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] vdr-plugin reelchannelscan-0.6.1 with s2api support

2009-10-28 Thread Goga777
Hi

http://www.free-x.de/vdr/patches/hdtv/vdr-plugin-reelchannelscan_0.6.1-1tvt1.tar.gz
here's patched channelscan plugin for vdr 1.7.* branch.
It supports s2api and can scan dvb-s/s2 transponders. It has been tested with 
vdr 1.7.9. 

thank to Yuri from Russian Linux VDR/DVB forum
http://www.forum.free-x.de/wbb/index.php?page=ThreadthreadID=290

the actual daily updated transponders list in tpl format (and also in ini, xml 
formats) you can find here's 
http://www.vdr-settings.com/download/channels/CLyngsatSP.tar.bz2


Goga777

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] xineliboutbut channel change judder

2009-10-25 Thread Goga777
Приветствую, Torgeir

I can confirm such behaviour with vdr-xine 093 and vdr 179 - yes, it's really 
annoing :(
Sorry, don't know how to solve such problem 

 When changing channels with vdr-sxfe (remote client on same computer),
 I get some judder. Playback starts quite quickly at channel change,
 but then there's a freeze of both audio and video for about half a
 second before it starts again. Any idea what the problem can be?
 
 Relevant .xine/config_xineliboutput;
 
 engine.buffers.video_num_buffers:500 (tried 250, no difference)
 engine.buffers.video_num_frames:15  (tred 30, no difference)
 engine.buffers.audio_num_buffers is not set, so should use default 230 (?)
 
 vdr-sxfe is run as
 
 vdr-sxfe --video vdpau --audio oss --verbose --aspect 16:9
 --fullscreen --post tvtime:method=use_vo_driver xvdr://127.0.0.1
 
 The xinelibplugin is configured as
 
 -Pxineliboutput --local=none --remote=37890
 
 I don't use local playback as it doesn't support all the configuration
 options that I use for vdpau. Material is mostly 576i.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] vdpau experience

2009-10-24 Thread Goga777
  xineliboutput is a bit more difficult, because the cvs is changing nearly 
  daily, so there is
  currently no patch available, but it should work without patches.
 
  where is the problem? Just do an
 
  cvs -z3 
  -d:pserver:anonym...@xineliboutput.cvs.sourceforge.net:/cvsroot/xineliboutput
   co -D '2009/10/13 12:00:00'
  vdr-xineliboutput
 
  and you are fine with current 
  'xineliboutput-cvs-20091013-vdpau-extensions-v11.diff.gz'
 
 Thanks for the cvs command. I was unaware that could even be done!

on which variant did you stay ? have you any problems with 1080i content 
watching and playback ?

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] channels.conf - changing name of channel

2009-10-11 Thread Goga777
Hi


each time when I tune on one transponder with radi-channels I have in log 
follow messages

Oct 11 20:29:50 arvdr vdr: [2949] Sent DISEQC command: t V [E0 31 6B 24] [E0 10 
38 F7] W150 V t
Oct 11 20:29:51 arvdr logger: osd: can't find out current locale character set
Oct 11 20:29:51 arvdr last message repeated 11 times
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 569 from 
'Energia,;Connecto' to 'ЭНЕРГИЯ,;Connecto'
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 569 from 
'ЭНЕРГИЯ,;Connecto' to 'Energia,;Connecto'
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 1 from 
'AvtoRadio,;Connecto' to 'АВТОРАДИО,;Connecto'
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 1 from 
'АВТОРАДИО,;Connecto' to 'AvtoRadio,;Connecto'
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 570 from 'Radio 
Alla,;Connecto' to 'Радио АЛЛА,;Connecto'
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 570 from 'Радио 
АЛЛА,;Connecto' to 'Radio Alla,;Connecto'
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 572 from 
'Humor-FM,;Connecto' to 'ЮМОР ФМ,;Connecto'
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 572 from 'ЮМОР 
ФМ,;Connecto' to 'Humor-FM,;Connecto'
Oct 11 20:29:54 arvdr vdr: [2613] switching to channel 626


in channels.conf I have still

:Радио 36 NTV+
Energia;Connecto:12303:HC34M2O0S0:S36.0E:27500:0:4143:0:0:30:112:310:0
Radio Alla;Connecto:12303:HC34M2O0S0:S36.0E:27500:0:4180:0:0:45:112:310:0
Радио Зенит 
ТЕСТ;HTB+:12265:HC34M2O0S0:S36.0E:27500:352+422=2:422:0:0:31102:112:10:0
Humor-FM;Connecto:12303:HC34M2O0S0:S36.0E:27500:0:4092:0:0:57:112:310:0
Relax FM;HTB+:12399:VC34M2O0S0:S36.0E:27500:0:427=rus:0:0:10327:112:3:0
Эхо Москвы;HTB+:12399:VC34M2O0S0:S36.0E:27500:0:428=rus:0:0:10328:112:3:0
Новый день;RSCC:12303:HC34M2O0S0:S36.0E:27500:0:125:0:0:300:112:310:0
Воскресение;TricolorTV:12303:HC34M2O0S0:S36.0E:27500:0:126:0:0:4:112:310:0
Радио Дети FM;HTB+:12418:HC34M2O0S0:S36.0E:27500:0:421:0:0:31101:112:10:0


why did vdr twice rename the same channel ?
for example - 

Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 572 from 
'Humor-FM,;Connecto' to 'ЮМОР ФМ,;Connecto'
Oct 11 20:29:51 arvdr vdr: [2950] changing name of channel 572 from 'ЮМОР 
ФМ,;Connecto' to 'Humor-FM,;Connecto'


Goga



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] vdr-xine - 4:3 zoom problem with h264 SD channels

2009-09-30 Thread Goga777
Приветствую, Reinhard


thanks

with your patch now everything is ok


 I had a look at the above channel. xine reports a ratio of 13636.
 
 But the current zoom code in input_vdr.c doesn't consider this to
 be 4:3. Please replace the function adjust_zoom() by the
 following code:
 

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] Segmentation fault with vdr 1.7.9 and femon 1.7.4

2009-09-20 Thread Goga777
Hi

with vdr 179 + femon 174 sometimes I have the vdr crash during of switching 
between channels with femon 

Sep 20 20:10:05 arvdr logger: vo_vdpau: deinterlace: temporal_spatial
Sep 20 20:10:05 arvdr logger: 200 frames delivered, 0 frames skipped, 59 frames 
discarded
Sep 20 20:10:05 arvdr logger: video_out: throwing away image with pts 28277792 
because it's too old (diff : 3732).
Sep 20 20:10:05 arvdr logger: input_vdr: flush buffers (vb: 0, ab: 0, vf: 0, 
af: 0) done.
Sep 20 20:10:10 arvdr vdr: [3177] changing name of channel 2 from 
'EinsFestival,;ARD' to 'Einsfestival,;ARD'
Sep 20 20:10:10 arvdr vdr: [3176] frontend 0 lost lock on channel 1, tp 110743
Sep 20 20:10:10 arvdr logger: input_vdr: execution of rpc command 0 () failed, 
exiting ...
Sep 20 20:10:10 arvdr kernel: [  409.669020] receiver on dev[3523]: segfault at 
9ef1000 ip b7bd7d26 sp b2d5a298 error 6
 in libc-2.9.so[b7b5f000+158000]
Sep 20 20:10:11 arvdr logger: input_vdr: rpc thread done.
Sep 20 20:10:11 arvdr lircd-0.8.3[2477]: removed client


gdb output 


[Thread 0xb026ab90 (LWP 3556) exited]
[New Thread 0xb026ab90 (LWP 3557)]
[Thread 0xb026ab90 (LWP 3557) exited]
[New Thread 0xb026ab90 (LWP 3558)]
[Thread 0xb026ab90 (LWP 3558) exited]
[New Thread 0xb026ab90 (LWP 3559)]
[Thread 0xb026ab90 (LWP 3559) exited]
[New Thread 0xb026ab90 (LWP 3560)]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb2468b90 (LWP 3554)]
0xb7ce7d26 in memcpy () from /lib/i686/cmov/libc.so.6
(gdb) bt
#0  0xb7ce7d26 in memcpy () from /lib/i686/cmov/libc.so.6
#1  0x00e8 in ?? ()
#2  0xb77a1e46 in ?? ()
#3  0x080a6ee8 in cDevice::Action (this=0x8de9fd0) at device.c:1464
#4  0x08118300 in cThread::StartThread (Thread=0x8de9fd0) at thread.c:257
#5  0xb7fcb495 in start_thread () from /lib/i686/cmov/libpthread.so.0
#6  0xb7d50a4e in clone () from /lib/i686/cmov/libc.so.6
(gdb) disass $pc-32 $pc+32
Dump of assembler code from 0xb7ce7d06 to 0xb7ce7d46:
0xb7ce7d06 memcpy+38: push   %ss
0xb7ce7d07 memcpy+39: movsb  %ds:(%esi),%es:(%edi)
0xb7ce7d08 memcpy+40: dec%ecx
0xb7ce7d09 memcpy+41: test   $0x3,%esi
0xb7ce7d0f memcpy+47: je 0xb7ce7d1d memcpy+61
0xb7ce7d11 memcpy+49: movsb  %ds:(%esi),%es:(%edi)
0xb7ce7d12 memcpy+50: dec%ecx
0xb7ce7d13 memcpy+51: test   $0x3,%esi
0xb7ce7d19 memcpy+57: je 0xb7ce7d1d memcpy+61
0xb7ce7d1b memcpy+59: movsb  %ds:(%esi),%es:(%edi)
0xb7ce7d1c memcpy+60: dec%ecx
0xb7ce7d1d memcpy+61: push   %eax
0xb7ce7d1e memcpy+62: mov%ecx,%eax
0xb7ce7d20 memcpy+64: shr$0x2,%ecx
0xb7ce7d23 memcpy+67: and$0x3,%eax
0xb7ce7d26 memcpy+70: rep movsl %ds:(%esi),%es:(%edi)
0xb7ce7d28 memcpy+72: mov%eax,%ecx
0xb7ce7d2a memcpy+74: rep movsb %ds:(%esi),%es:(%edi)
0xb7ce7d2c memcpy+76: pop%eax
0xb7ce7d2d memcpy+77: mov%eax,%edi
0xb7ce7d2f memcpy+79: mov%edx,%esi
0xb7ce7d31 memcpy+81: mov0x4(%esp),%eax
0xb7ce7d35 memcpy+85: ret
0xb7ce7d36 memcpy+86: shr%ecx
0xb7ce7d38 memcpy+88: jae0xb7ce7d3b memcpy+91
0xb7ce7d3a memcpy+90: movsb  %ds:(%esi),%es:(%edi)
0xb7ce7d3b memcpy+91: shr%ecx
0xb7ce7d3d memcpy+93: jae0xb7ce7d41 memcpy+97
0xb7ce7d3f memcpy+95: movsw  %ds:(%esi),%es:(%edi)
0xb7ce7d41 memcpy+97: rep movsl %ds:(%esi),%es:(%edi)
0xb7ce7d43 memcpy+99: jmp0xb7ce7d2d memcpy+77
0xb7ce7d45: nop
End of assembler dump.
(gdb) info all-registers
eax0x0  0
ecx0x3ffb43f3   1073431539
edx0xffd4   -44
ebx0x92df5e4154007012
esp0xb2468298   0xb2468298
ebp0xb24682c8   0xb24682c8
esi0xb266a000   -1301897216
edi0x94273cc155349964
eip0xb7ce7d26   0xb7ce7d26 memcpy+70
eflags 0x210246 [ PF ZF IF RF ID ]
cs 0x73 115
ss 0x7b 123
ds 0x7b 123
es 0x7b 123
fs 0x0  0
gs 0x33 51
st00(raw 0x)
st10(raw 0x)
st20(raw 0x)
st30(raw 0x)
st40.31748889757214362141724(raw 
0x3ffda28de7553e0819da)
st51(raw 0x3fff8000)
st6100  (raw 0x4005c800)
st7100  (raw 0x4005c800)
fctrl  0x37f895
fstat  0x4020   16416
ftag   0x   65535
fiseg  0x0  0
fioff  0x0  0
foseg  0x0  0
fooff  0x0  0
fop0x0  0
xmm0   {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, 
v16_int8 = {0x0 repeats 16 times},
  v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 
0x0, 0x0}, v2_int64 = {0x0, 0x0},
  uint128 = 0x}
xmm1   {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, 
v16_int8 = {0x0 repeats 16 times},
  v8_int16 = {0x0, 0x0, 

Re: [vdr] vdr-sxfe buffer empty

2009-09-19 Thread Goga777
  which xineliboutput version are you using ? cvs ?
  any patches from here ?
  http://www.vdr-portal.de/board/thread.php?threadid=86804
 
  Goga
  vdr 179 + xbmc
 
 vdr 1.7.8 + xinelibeoutput cvs -minus said patch. Am using the

did you try vdr 179 with cvs xineliboutput ?

 xine-lib 1.2 vdpau branch, which I previously used to run xine with

have you any difference between xine-lib 1.2 vdpau branch and xine-vdpau branch 
?

 I'm amazed that vdr-sxfe manages to completely avoid any judder in
 playback, something which I haven't really seen since I ran with a ff
 card. 

did you try with local frontend ? not with vdr-sxfe 

There's some occasional loss of audio lipsync, and channel
 change is not smooth; I see both audio and video freeze for a few
 frames. I guess both of those are work in progress.
 
 Would any of the patches from the vdr-portal thread above help on those 
 issues?

You can try that patch xine-vdpau-r281-crop-v9.diff.gz 
http://www.vdr-portal.de/board/attachment.php?attachmentid=22895

 there're good reports about it
http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=8313#post8313

 I have to say that vdpau is looking like a very good solution for hdtv
 playback, it's just a shame that they didn't implement field parity
 support for interlaced material.

+1
 
Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] vdr-sxfe buffer empty

2009-09-18 Thread Goga777
Приветствую, Torgeir

which xineliboutput version are you using ? cvs ?
any patches from here ?
http://www.vdr-portal.de/board/thread.php?threadid=86804

Goga
vdr 179 + xbmc




 2009/9/13 Goga777 goga...@bk.ru:
  Приветствую, Torgeir
  I'm trying to find out why vdr-sxfe freezes for a split second once or
  twice every minute. Am running a
 
  xineliboutput is configured as -Pxineliboutput --local=none 
  --remote=37890
 
  I run vdr-sxfe as
 
  vdr-sxfe --video vdpau --audio oss xvdr://127.0.0.1 --verbose --aspect
  16:9 --fullscreen --post tvtime:method=use_vo_driver --hud --syslog
  21 | /tmp/sxfelog.txt
 
  Some output log from xine_input.c
 
  Sep 13 10:54:18 htpc vdr-sxfe[4771]: [4781] [input_vdr] SCR: Buffer
 
  please try to revert this comment
  http://xineliboutput.cvs.sourceforge.net/viewvc/xineliboutput/vdr-xineliboutput/xine_input_vdr.c?r1=1.278r2=1.279sortby=date
 
  (thanks to Rofa for that advice)
 
 Thx! vdr-sxfe now runs very smootly with SD channels. Slight judder
 still with HD channels though.
 
 Now the VDR experience is the best I've had for a very long time,
 vdr-sxfe provides me with judder free live tv and playback, something
 I never achieved with vdr-xine. Generic media playback through the
 media browser is a definite plus, although the media browser interface
 is a bit too cluttered to achieve high WAF. It would be nice to be
 able to clear the settings from the main media player menu, and
 optionally turn off items, eg. if I never need to use the play music /
 play cd options.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] vdr-sxfe buffer empty

2009-09-13 Thread Goga777
Приветствую, Torgeir
 I'm trying to find out why vdr-sxfe freezes for a split second once or
 twice every minute. Am running a
 
 xineliboutput is configured as -Pxineliboutput --local=none --remote=37890
 
 I run vdr-sxfe as
 
 vdr-sxfe --video vdpau --audio oss xvdr://127.0.0.1 --verbose --aspect
 16:9 --fullscreen --post tvtime:method=use_vo_driver --hud --syslog
 21 | /tmp/sxfelog.txt
 
 Some output log from xine_input.c
 
 Sep 13 10:54:18 htpc vdr-sxfe[4771]: [4781] [input_vdr] SCR: Buffer

please try to revert this comment
http://xineliboutput.cvs.sourceforge.net/viewvc/xineliboutput/vdr-xineliboutput/xine_input_vdr.c?r1=1.278r2=1.279sortby=date

(thanks to Rofa for that advice)

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] xbmc-pvr (was - HD clients for vdr)

2009-09-01 Thread Goga777
do you know why xbmc support only vdpau-temporal ? what about bob-vdpau ? 
temporal_spatial-vdpau ?

 I got xbmc-vdr working the other day - but can't seem to see any
 active deinterlacing when using VDPAU Temporal. Other methods such as
 bob and weave work okay, but not VDPAU. Does anyone else see this
 problem? Pretty useless without any reasonable deint going on.. :-(

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [ANNOUNCE] vdr-femon-1.7.3

2009-08-30 Thread Goga777
Приветствую, Rolf

thanks you very much for your wonderful plugin 

 Please, report any regressions by email/IRC.


which IRC channel do you mean ? xine-vdpau ?

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] 1.7.9 patches

2009-08-24 Thread Goga777
 Thanks for  the ttxtsubs patch for vdr 1.7.9
 
 Anybody has a vdr-1.7.9_extensions.diff patch?
 
 Or a setup plugin patch for vdr 1.7.9

have a look here please
http://www.forum.free-x.de/wbb/index.php?page=ThreadpostID=7872#post7872

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9

2009-08-23 Thread Goga777
   Your headers seem broken. What should happen (i.e. in upstream kernel
   git) is:
 
  let's have a look on my headers (debian sid kernel 2.6.30 s2-liplianin dvb)
 
 Did you look in /usr/include/linux/dvb/... or in /usr/src/linux/... ?

/usr/src/s2-liplianin/linux

 For compiling userspace stuff (which vdr for sure is), the versions 
 in /usr/include are used.

not so necessary

it's possible to change this behaviour 

-- edit -- Make.config -- DVBDIR = /usr/src/s2-liplianin/linux


Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9

2009-08-23 Thread Goga777
  Maybe one of these includes in these files is missing?
  
  as you can see - no, everything is ok
 
 Confirm that you looked at the correct files:
 
 You should first look under ../s2-liplianin/linux/include/

in dir /usr/src/s2-liplianin/linux/include/linux there's not any mentioned you 
files


you can have a look yourselves 
http://mercurial.intuxication.org/hg/s2-liplianin/file/ecdc9c389f8a/linux/include/

, and if the
 file in question doesn't exist there, you should look under
 /usr/include/  (note, not in /usr/src).

I did so exactly in my previous mail

PS
vdr 178 compiled fine with existing headers

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9

2009-08-23 Thread Goga777
 Run this:
 g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -E -DREMOTE_KBD
 -DLIRC_DEVICE=\/dev/lircd\ -DRCU_DEVICE=\/dev/ttyS0\ -D_GNU_SOURCE
 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
 -DVIDEODIR=\/video\ -DCONFDIR=\/etc/vdr\
 -DPLUGINDIR=\./PLUGINS/lib\ -DLOCDIR=\./locale\
 -I/usr/include/freetype2 -I../s2-liplianin/linux/include -o
 vdr.processed.c vdr.c
 
 vdr.processed.c should contain the preprocessed C++ source code. Please
 attach it (provided it is not too large) or upload somewhere.

vdr.processed.c.bz2
http://slil.ru/27922128

 

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9

2009-08-23 Thread Goga777
  I did so exactly in my previous mail
 
  PS
  vdr 178 compiled fine with existing headers
 
 Have you tried the patch I posted?


no, because I have already solved this problem (as I wrote in my previous mail)


I could compile vdr 179 after of adding in dvbdevice.h string like

typedef unsigned char __u8;

http://vdrportal.de/board/thread.php?postid=806612sid=21750376f0aea416e10c099a4a488686#post806612

Goga


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] [ANNOUNCE] VDR developer version 1.7.9

2009-08-23 Thread Goga777
 Which distribution and version are you using?

debian sid kernel 2.6.30

 And package name where /usr/include/linux/types.h and related files
 would also help:
 rpm -qf /usr/include/linux/types.h (on rpm systems)
 dpkg -S /usr/include/linux/types.h (on deb systems, I think)

arvdr:/usr/src/vdr-1.7.9# dpkg -S /usr/include/linux/types.h
linux-libc-dev: /usr/include/linux/types.h
 

Goga

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


  1   2   3   4   >