El 8/5/19 a les 19:25, Karl-Heinz Volk ha escrit:
I just purchased an Amazon FireTV 4k stick and this is amazing. It is
working until 2160p60 consuming 1..2 Watt using an USB power supply.
Why is there no VDR for Android using network DVB sources?
You can buy an android tv box and put
El 13/01/16 a les 12:00, Peter Münster ha escrit:
Hi,
Is is possible to play VDR-recordings on Samsung Smart TV with
subtitles, and if yes, how please?
It seems, that the Samsung Smart needs 2 files: an mp4 and an srt file.
I've tried: "ffmpeg -i 1.ts -vn -an -codec:s:0 srt 1.srt"
of the "Positioner application notes" one.
Duh
Bye
Regards
El 2015-12-12 17:37, Luca Olivetti escribió:
Hello,
In cDiseqcPositioner the last nibble (corresponding to the first
decimal) of the angle is calculated as
a % 10 * 16 / 10
With, e.g. angle -123 (-12.3) the resulting dise
Hello,
In cDiseqcPositioner the last nibble (corresponding to the first
decimal) of the angle is calculated as
a % 10 * 16 / 10
With, e.g. angle -123 (-12.3) the resulting diseqc command would be
6e e0 c4
(i.e. the last nibble is 4 to represent 0.3).
OTOH the enigma2 implementation uses
El 02/10/15 a les 02:14, Ralph Metzler ha escrit:
Yes, build instructions are hard to find.
After some trial and error I am doing it like this:
git clone https://github.com/oe-alliance/build-enviroment.git
cd build-enviroment
make
MACHINE=vuduo2 DISTRO=openvix DISTRO_TYPE=release make image
El 12/08/15 a les 09:28, jori.hamalai...@teliasonera.com ha escrit:
I abandoned VDR after 11 years of running it for Duo2+OpenVix.
Sorry for the off-topic, but my google-fu is failing: where could I find
instructions on how to build openvix from sources?
I see they're on github, but they
Al 23/04/13 12:41, En/na Klaus Schmidinger ha escrit:
So maybe it should be better called SetCurrentPosition
The specs on the 0x6F command are a little vague.
What do you suggest should be sent to a DiSEqC rotor?
Something like
6F nn 00 00
where 'nn' is the number of the satellite
Al 22/04/13 14:28, En/na Klaus Schmidinger ha escrit:
So what do you folks think?
I don't have any preference wrt Left/Right East/West.
My last (and only) set top box with integrated positioner was analogue
and used East/West, but I don't remember if it had any provision for the
southern
Al 21/04/13 14:54, En/na Klaus Schmidinger ha escrit:
I'm currently implementing support for steerable dishes, loosely based
on https://linuxtv.org/patch/12911. In doing so, I'm defining a virtual
base class cPositioner, which defines all the functions necessary to
control the positioner.
Is
Al 21/04/13 15:52, En/na Klaus Schmidinger ha escrit:
Any visual feedback will be done via the channel display of the skin, by
comparing
CurrentLongitude() to TargetLongitude(). And of course any section
filtering will
start only after the target position has been reached.
Mmh, how will
Al 21/04/13 20:17, En/na Luca Olivetti ha escrit:
Al 21/04/13 15:52, En/na Klaus Schmidinger ha escrit:
Any visual feedback will be done via the channel display of the skin, by
comparing
CurrentLongitude() to TargetLongitude(). And of course any section
filtering will
start only after
Al 21/04/13 15:52, En/na Klaus Schmidinger ha escrit:
One more observation
virtual void StepEast(void) {}
/// Move the dish one step to the east.
virtual void StepWest(void) {}
/// Move the dish one step to the west.
I'd suggest a parameter with the number of steps
Al 21/04/13 20:36, En/na Luca Olivetti ha escrit:
Al 21/04/13 15:52, En/na Klaus Schmidinger ha escrit:
One more observation
virtual void StepEast(void) {}
/// Move the dish one step to the east.
virtual void StepWest(void) {}
/// Move the dish one step
Al 04/03/13 15:30, En/na Klaus Schmidinger ha escrit:
While implementing an option to turn on/off sorting folders first in the
Recordings
menu, one more string was necessary and needs to be translated:
Always sort folders first
es_ES Siempre ordenar primero carpetas
ca_ES Sempre ordenar
Al 30/12/12 01:08, En/na Christopher Reimer ha escrit:
I don't consider the mailinglist as central spot of developement.
Here I'm forced to speak English. Almost all VDR Users are German. And
in VDR-Portal I reach the critical mass. With the addition that I am
allowed to speak my native
Al 17/06/12 12:50, En/na Klaus Schmidinger ha escrit:
Well, first of all: there will be no SQL dependency in the core VDR ;-)
That's a pity, because channels.conf would be a perfect candidate for being an
sqlite table.
(Note that I said sqlite, not sql, but since sqlite uses sql it would allow
Al 27/03/2012 15:29, En/na YUP ha escrit:
I managed to build actuator plugin. As it was stated by Klaus, Any
plugins that implement cStatus::ChannelSwitch() need to add the
parameter 'bool LiveView' to that function. So it is enough to add
bool LiveView , for details please see my PKGBUILD
Al 27/03/12 16:35, En/na Dominic Evans ha escrit:
Ah I realise now that someone sent me the rotorng sources rather than
the actuator plugin.
Which is the superior of these two?
They're different: actuator controls an old style 36V actuator, using a
relay board
connected to the parallel
, find some time! ;-)
I'm really sorry, but I have even less time now :-(
I think I won't have time to touch this at least until summer.
Bye
Regards,
Yarema
17 січня 2012 р. 13:28 Luca Olivetti l...@ventoso.org
mailto:l...@ventoso.org написав:
Al 17/01/12 00:39, En/na YUP ha escrit
Al 10/02/12 18:07, En/na Pim Zandbergen ha escrit:
I suppose you could use mediatomb with vdrnfofs to share your recordings.
Or hack the TV to simply nfs mount the directory with the recordings
Bye
--
Luca
___
vdr mailing list
vdr@linuxtv.org
Al 13/09/11 11:09, En/na Henning Pingel ha escrit:
Can actuator be used by people without a motor behind their dish?
Yes, with the -s option it will just offer the channel scanning functionality.
Bye
--
Luca
___
vdr mailing list
vdr@linuxtv.org
Al 11/09/11 13:49, En/na Udo Richter ha escrit:
Am 11.09.2011 11:37, schrieb Henning Pingel:
And this tackles another small problem: I think that VDR doesn't delete
any channels from the channels.conf in any case. So outdated channels
have to be removed manually. Has there been an attempt to
Al 09/09/11 21:19, En/na Reinhard Nissl ha escrit:
No matter which OSD size I setup in vdr-xine (e. g. 720x576, 1280x720 or
1920x1080), the subtitles are never positioned correctly and vdr-xine
complains very often like that:
vdr-xine: new OSD(-152, 0) requested with coordinates out of
Al 09/09/11 16:54, En/na Klaus Schmidinger ha escrit:
I think this is still needed for output plugins that don't implement the
method,
so that they should at least work as before this modification.
Can you please point out exactly which modificaton you are
referring to?
I'm referring to
Al 05/09/11 18:15, En/na Klaus Schmidinger ha escrit:
On 05.09.2011 00:08, Luca Olivetti wrote:
Al 04/09/11 23:53, En/na Luca Olivetti ha escrit:
Al 04/09/11 23:05, En/na Klaus Schmidinger ha escrit:
Ok, I couldn't resist and I tried. I don't know if it solves the issue
because now
Al 05/09/11 19:43, En/na Luca Olivetti ha escrit:
Ok, I got confused, but why do you use VideoAspect * OsdHeight instead of
OsdWidth?
Most probably the problem is caused because the dxr3 plugin doesn't implement
the GetOsdSize and GetVideoSize method, but the xine plugin does implement
Al 04/09/11 15:42, En/na Klaus Schmidinger ha escrit:
- The subtitle PIDs are now stored in the channels.conf file as an extension
to the
TPID field (thanks to Rolf Ahrenberg).
When I start a recording on a satellite that's not the one the dish is pointing
at,
when it finally reaches the
Al 04/09/11 16:41, En/na Klaus Schmidinger ha escrit:
Does this modification fix the issue?
It might - there's one way to find out ;-)
Well, I'm getting old, so I try the latest and greatest only if
it's strictly necessary :-D
Bye
--
Luca
___
Al 04/09/11 17:22, En/na Luca Olivetti ha escrit:
Al 04/09/11 16:41, En/na Klaus Schmidinger ha escrit:
Does this modification fix the issue?
It might - there's one way to find out ;-)
Well, I'm getting old, so I try the latest and greatest only if
it's strictly necessary :-D
Ok, I
Al 04/09/11 23:05, En/na Klaus Schmidinger ha escrit:
Ok, I couldn't resist and I tried. I don't know if it solves the issue
because now the subtitles are whacky: they only appear from time to
time and they're in the middle of the screen, both with my trusty dxr3 and
with the xine plugin (in
Al 04/09/11 23:53, En/na Luca Olivetti ha escrit:
Al 04/09/11 23:05, En/na Klaus Schmidinger ha escrit:
Ok, I couldn't resist and I tried. I don't know if it solves the issue
because now the subtitles are whacky: they only appear from time to
time and they're in the middle of the screen
Al 01/08/11 10:04, En/na Steffen Barszus ha escrit:
2011/8/1 Gerald Dachs v...@dachsweb.de:
http://www.geek.com/articles/chips/raspberry-pi-25-pc-goes-into-alpha-production-20110728/
Any thoughts?
VDR runs just fine on a seagate dockstar, so I see no reason why it
shouldn't run on this
Al 20/03/11 22:20, En/na Morfsta ha escrit:
I'd like to release it at some point when I've tidied it up (perhaps
as rotor-ng or something), but one issue I have is with DVB-S2 signal
tuning and scanning on my Hauppauge Nova HD-S2 card - does anyone have
this functionality working either with
Al 23/01/11 09:56, En/na Arthur Konovalov ha escrit:
On 22.01.2011 20:31, Timothy D. Lenz wrote:
VDR being a euro program where FTA sat is far more common should have
really good support built in.
I agree and awaiting too native rotor support in the vdr core.
What I'd like to see is that
Al 22/01/11 19:31, En/na Timothy D. Lenz ha escrit:
I know about that plugin. Won't really help with a rotor. Different
setup. Actuators are for BUD's, Dishes over 1.2m though they have come
out with small dish systems.
Yes, my dish is 1.2m, but I fitted it for an analog receiver, long
Al 16/01/11 12:09, En/na Gero ha escrit:
Currently when I forget to switch to a SD channel on the xineliboutput
frontend before stopping that frontend, the vdr is not operable for the FF-
user. There's no way to recover.
I had the same issue with vdr-xine and the dxr3 plugin.
Maybe the ff
Al 11/01/11 19:24, En/na Tony Houghton ha escrit:
Since my upgrade from VDR 1.6.0 to 1.7.16 I can't view my local ITV1
region (ITV1 Mer South) on Freesat. The EPG appears normal, but there's
no picture or sound. ITV1 is OK on Freeview, as is the London version on
Freesat. The log says:
Jan 11
Al 11/01/11 21:50, En/na Tony Houghton ha escrit:
BTW, this is my entry for it
ITV1 Meridian
S;BSkyB:10891:HC56M2O0S0:S28.2E:22000:3336=2:3337=...@4:2344:0:10140:2:2053:0
Essentially the same as mine I think.
Well, yours is missing some of the parameters (i.e. it's missing the
M2O0S0),
Al 04/01/11 10:01, En/na Luca Olivetti ha escrit:
En/na Luca Olivetti ha escrit:
Yesterday I noticed that the timing offset is not fixed but depends on
the recording (e.g, with my previous experiments I hardcoded a 4
seconds delay for the bbc channels, while yesterday I needed a 2
minutes
En/na Luca Olivetti ha escrit:
Yesterday I noticed that the timing offset is not fixed but depends on
the recording (e.g, with my previous experiments I hardcoded a 4 seconds
delay for the bbc channels, while yesterday I needed a 2 minutes delay).
I don't know the cause of this offset
Al 01/01/11 18:09, En/na Luca Olivetti ha escrit:
I found a simpler (i.e scriptable) way: I wrote a simple python script
that uses ProjectX (cvs version) to extract the subtitles from the ts
file, BDSup2Sub to convert the subtitles to png images, ImageMagick's
convert to improve the resulting
Al 18/12/10 12:57, En/na Luca Olivetti ha escrit:
Al 15/12/10 18:28, En/na Luca Olivetti ha escrit:
I've a media player that only understand srt subtitles, so I'm looking
for a way to extract the dvb subtitles from a vdr ts recording, and then
use some kind of ocr to convert it to srt.
I asked
Al 15/12/10 18:28, En/na Luca Olivetti ha escrit:
I've a media player that only understand srt subtitles, so I'm looking
for a way to extract the dvb subtitles from a vdr ts recording, and then
use some kind of ocr to convert it to srt.
I asked google and I came empty handed (many people asking
Al 15/12/10 00:19, En/na VDR User ha escrit:
On Tue, Dec 14, 2010 at 12:56 PM, Luca Olivettil...@ventoso.org wrote:
Instead of speculating I actually tried.
I created a test database with the contents of my channels.conf (only
containing the number, name, frequency, source, symbol rate and the
Al 15/12/10 20:35, En/na VDR User ha escrit:
On Wed, Dec 15, 2010 at 9:21 AM, Luca Olivettil...@ventoso.org wrote:
Instead of speculating I actually tried.
I created a test database with the contents of my channels.conf (only
containing the number, name, frequency, source, symbol rate and the
Al 15/12/10 20:57, En/na Jouni Karvo ha escrit:
I don't understand what would be easy in using SQL. Since the
channels.conf-code is already there,
and pretty stable, then obviously rewriting that to SQL is not easy,
but instead additional work.
Justifying additional work needs some reason.
Al 13/12/10 11:34, En/na Steffen Barszus ha escrit:
That was my point in the beginning. Then: I want to see sqlite3 being
less efficient on insert and fetch or memory consumption. I can not
imagine it (prove me wrong! ;)). Last but not least i don't think any
user would even notice any
Al 14/12/10 21:20, En/na Luca Olivetti ha escrit:
Al 13/12/10 11:34, En/na Steffen Barszus ha escrit:
That was my point in the beginning. Then: I want to see sqlite3 being
less efficient on insert and fetch or memory consumption. I can not
imagine it (prove me wrong! ;)). Last but not least i
En/na Klaus Schmidinger ha escrit:
Of course, but they are *simple* databases ;-)
I don't want VDR to become dependent on some particular database software.
And I like the fact that these files are plain readable text files.
text files, yes, plain readable, no (with all special symbols,
Al 12/11/10 16:24, En/na Klaus Schmidinger ha escrit:
I also see that cSdtFilter starts processing with the first section, and
that shouldn't really be necessary as long as one processes all sections.
Personally I'm not interested in that whole NVOD stuff, therefore
Me neither, but that
Al 03/11/10 21:31, En/na Alasdair Campbell ha escrit:
Hi,
Been a while since I've used VDR. Have it setup after scanning using
the scan program, however something is strange.
There are multiple versions of some channels, such as BBC
One/Two/News, Channel 4 etc. Some of these either have video
En/na Halim Sahin ha escrit:
Hi,
On Thu, Oct 21, 2010 at 10:03:05PM +0400, Goga777 wrote:
have a look on actuator plugin from Luca
http://www.ventoso.org/luca/vdr/
I read only about dvb-s/s2 support in the announcement. Unfortunately in need
also dvb-t and maybe
later dvb-c (I am looking for
Al 21/10/10 20:03, En/na Goga777 ha escrit:
I tested reelchannelscan on my vdr-1.7.15 and had problems
with it.
It crashs when using it with empty channels.conf, because it need a
tuned channel before scanning.
When started with an empty channels.conf there is no channel tuned and
the plugin
Al 12/10/10 18:13, En/na Hannu Tirkkonen ha escrit:
On 11.10.2010 22.22, Vesa wrote:
eHD card has now days working plugin for vdr, more info about that here:
http://www.vdr-portal.de/board/thread.php?threadid=98019
eHD is stable with latest card firmwares, also for ts playback. Only
issue
is
Al 10/10/10 13:39, En/na Gregoire Favre ha escrit:
On Sun, Oct 10, 2010 at 12:39:24AM +0200, Luca Olivetti wrote:
Oh, I know what happened :-(
Try the attached patch.
Thanks, that's it :-)
Ok, I'll push a new release.
Now i just discovered that my vdr-xine don't seems to work (even
Al 10/10/10 14:06, En/na Goga777 ha escrit:
From this version it is also possible to use the plugin without an
actuator, i.e. as a channel scanner only.
does it mean, that with your plugin no need to use reelchannelscan plugin for
creating/updating
channels.conf ?
Yes, but I could only
Al 10/10/10 13:54, En/na Luca Olivetti ha escrit:
Al 10/10/10 13:39, En/na Gregoire Favre ha escrit:
On Sun, Oct 10, 2010 at 12:39:24AM +0200, Luca Olivetti wrote:
Oh, I know what happened :-(
Try the attached patch.
Thanks, that's it :-)
Ok, I'll push a new release.
I released version
Al 10/10/10 16:39, En/na Luis Fernandes ha escrit:
hello,
just to say that in scanner.c
must contain this patch if relevant:
- Int Atypes [MAXDPIDS + 1] = {0};
+ Int Atypes [MAXAPIDS + 1] = {0};
and also
Dpids [NumDpids] = esPid;
+ Dtypes [NumDpids] = SI:: AC3DescriptorTag;
Al 10/10/10 17:04, En/na Luca Olivetti ha escrit:
Al 10/10/10 16:39, En/na Luis Fernandes ha escrit:
hello,
just to say that in scanner.c
must contain this patch if relevant:
- Int Atypes [MAXDPIDS + 1] = {0};
+ Int Atypes [MAXAPIDS + 1] = {0};
and also
Dpids [NumDpids] = esPid;
+ Dtypes
Hello,
I'm releasing version 1.2.0 of the actuator plugin available at
http://www.ventoso.org/luca/vdr/
This plugin controls a linear actuator (or an horizon to horizon one)
through the parallel port with a simple circuit.
From this version it is also possible to use the plugin without an
Al 09/10/10 22:03, En/na Goga777 ha escrit:
From this version it is also possible to use the plugin without an
actuator, i.e. as a channel scanner only.
does it mean, that with your plugin no need to use reelchannelscan plugin for
creating/updating
channels.conf ?
Yes, but I could only
Al 09/10/10 23:23, En/na Gregoire Favre ha escrit:
On Sat, Oct 09, 2010 at 10:43:10PM +0200, Luca Olivetti wrote:
Yes, but I could only test it with plain dvb-s, no dvb-s2.
Also, it doesn't to a blind scan, it needs a transponder.ini file for
each satellite that you want to scan.
You can
Al 10/10/10 00:25, En/na Luca Olivetti ha escrit:
Al 09/10/10 23:23, En/na Gregoire Favre ha escrit:
On Sat, Oct 09, 2010 at 10:43:10PM +0200, Luca Olivetti wrote:
Yes, but I could only test it with plain dvb-s, no dvb-s2.
Also, it doesn't to a blind scan, it needs a transponder.ini file
Al 08/10/10 00:37, En/na Mika Laitio ha escrit:
with vdr 1.7.16 and reelbox plugin (eHD) this channels are ok in live tv
(even with some BER with my dish, Warszawa seemed to be weaker, i also
got UNC's there but no real problems, only a small picture distortion
some times)
And Reinhard also
En/na Simon Baxter ha escrit:
My setup.conf for the LNB has:
LnbFrequHi = 11300
LnbFrequLo = 10750
LnbSLOF = 12500
If that's an universal lnb the correct settings are
LnbFrequHi = 10600
LnbFrequLo = 9750
LnbSLOF = 11700
Bye
--
Luca
___
vdr
En/na Newsy Paper ha escrit:
which DVB card and which driver version do you use? I also had those problems
with an old skystar 2. Nr of pid filters was too low and datarate of the stream
was to high to transport it completely I was told.
The card is indeed a skystar 2, but these are fairly
En/na Luca Olivetti ha escrit:
En/na Newsy Paper ha escrit:
which DVB card and which driver version do you use? I also had those
problems with an old skystar 2. Nr of pid filters was too low and
datarate of the stream was to high to transport it completely I was told.
The card is indeed
Al 06/10/10 10:11, En/na Luca Olivetti ha escrit:
En/na Luca Olivetti ha escrit:
En/na Newsy Paper ha escrit:
which DVB card and which driver version do you use? I also had those
problems with an old skystar 2. Nr of pid filters was too low and
datarate of the stream was to high to transport
Al 04/10/10 21:07, En/na Luca Olivetti ha escrit:
Al 04/10/10 20:55, En/na Luca Olivetti ha escrit:
Al 04/10/10 20:10, En/na Luca Olivetti ha escrit:
Al 04/10/10 19:36, En/na Luca Olivetti ha escrit:
Now I tried with a clean vdr (1.7.16), no patches (though my patches
didn't modify
Al 05/10/10 20:49, En/na Reinhard Nissl ha escrit:
FWIW, if I set the audio pid to 0, the video is perfect.
With all output plugins (vdr-xine, dxr3 and streamdev, the latter only
if NOT streaming in TS, which pulls the audio anyway and breaks the
picture).
The reverse is also true: if I set
Al 05/10/10 21:27, En/na Reinhard Nissl ha escrit:
Hi,
Am 05.10.2010 21:00, schrieb Luca Olivetti:
Al 05/10/10 20:49, En/na Reinhard Nissl ha escrit:
FWIW, if I set the audio pid to 0, the video is perfect.
With all output plugins (vdr-xine, dxr3 and streamdev, the latter only
Al 05/10/10 21:50, En/na Luca Olivetti ha escrit:
Does this happen with 1.7.15 too? I'm still at 1.7.15 -- didn't
find time to update yet.
Yes, I just tried 1.7.16 to see if if was automagically solved.
I also tried with vdr-1.7.9 (a random version I used since I had the
tarball around
Al 04/10/10 18:40, En/na Lars Bläser ha escrit:
Well, I'm pretty sure the ber and the unc are right: I tried to stream
those channels with dvbstream and they play perfectly, so the signal is ok.
hi,
to see if unc and ber are working you should provoke those errors by
weakening the signal and
Al 04/10/10 19:36, En/na Luca Olivetti ha escrit:
Now I tried with a clean vdr (1.7.16), no patches (though my patches
didn't modify the signal path at all), only the vdr-xine plugin and the
problem is still there.
BTW, the same xine I'm using with the plugin, has no problem playing the
stream
Al 04/10/10 20:10, En/na Luca Olivetti ha escrit:
Al 04/10/10 19:36, En/na Luca Olivetti ha escrit:
Now I tried with a clean vdr (1.7.16), no patches (though my patches
didn't modify the signal path at all), only the vdr-xine plugin and the
problem is still there.
BTW, the same xine I'm using
Al 04/10/10 20:55, En/na Luca Olivetti ha escrit:
Al 04/10/10 20:10, En/na Luca Olivetti ha escrit:
Al 04/10/10 19:36, En/na Luca Olivetti ha escrit:
Now I tried with a clean vdr (1.7.16), no patches (though my patches
didn't modify the signal path at all), only the vdr-xine plugin
Al 04/10/10 21:41, En/na Reinhard Nissl ha escrit:
Hi,
Am 04.10.2010 21:07, schrieb Luca Olivetti:
Al 04/10/10 20:55, En/na Luca Olivetti ha escrit:
Al 04/10/10 20:10, En/na Luca Olivetti ha escrit:
Al 04/10/10 19:36, En/na Luca Olivetti ha escrit:
Now I tried with a clean vdr (1.7.16
Al 04/10/10 22:21, En/na Luca Olivetti ha escrit:
Besides, the same xine with the same configuration had no problem
playing the stream from dvbstream, and the fact that all output plugins
are doing the same points to a lower level problem.
The dxr3 plugin still uses pes video, so I first
Al 04/10/10 22:38, En/na Luca Olivetti ha escrit:
Al 04/10/10 22:21, En/na Luca Olivetti ha escrit:
Besides, the same xine with the same configuration had no problem
playing the stream from dvbstream, and the fact that all output plugins
are doing the same points to a lower level problem
Al 03/10/10 14:53, En/na Luca Olivetti ha escrit:
Hello,
I cannot currently receive dvb-s2 channels, but I'd like to update my
plugin to work more or less correctly with it (even if I only have a
couple of users).
The wikipedia page
http://en.wikipedia.org/wiki/DVB-S2
says that dvb-s2 has 4
Hello,
this has been bugging me for a while, but since it happens on channels I
don't usually watch, I didn't ask before.
There are some channels that are completely unwatchable: even with a
perfect signal (at least according to femon) I can only see blocking
artefacts and chirping sound.
I
Al 03/10/10 23:10, En/na VDR User ha escrit:
On Sun, Oct 3, 2010 at 12:23 PM, Luca Olivettil...@ventoso.org wrote:
Hello,
this has been bugging me for a while, but since it happens on channels I
don't usually watch, I didn't ask before.
There are some channels that are completely unwatchable:
Al 04/10/10 00:20, En/na VDR User ha escrit:
On Sun, Oct 3, 2010 at 3:06 PM, Luca Olivettil...@ventoso.org wrote:
Yes, it seems like a bad signal, but femon is reporting a ber and unc of 0
(I really don't trust snr and strength, but ber and unc should be just about
right).
The point I was
Al 02/10/10 09:51, En/na Teemu Suikki ha escrit:
It's annoying to have two almost working versions. :) git version is
fine except for the audio and subtitles, and 0.2.11 is fine except for
the OSD.
Mmh, strange, my osd is working (with the usual problems but mostly
working).
Note that my
Al 02/10/10 12:19, En/na Goga777 ha escrit:
I'm trying to understand cSdtFilter in order to write a channel scanner.
will it the plugin for vdr with possibility to scan dvb-s2 channels ?
Hi, no, it's integrated in the actuator plugin. It should work with s2
channels, but I've no means to
Hello,
I'm trying to understand cSdtFilter in order to write a channel scanner.
I see that when it finds a SI::NVODReferenceDescriptorTag it will add it
to the previously found channel with channel-SetLinkChannels, but it
only does if it is in the current section (channel is a local variable)
Al 05/09/10 22:54, En/na Scott Waye ha escrit:
In particular the lost lock/regained lock looks strange. Searching
through the archives suggests this could be due to a weak signal. I ran
femon and got this:
FE: Conexant CX24116/CX24118 (DVBS)
status SCVYL | signal d840 | snr d800 | ber
En/na Goga777 ha escrit:
Provided that I disable Force Full GPU Scaling, the tv reports a 50Hz
signal.
if you disabled full gpu scaling , how upscaling will work really ? what and
how will upscale SD video to 1080p ?
According to the help text, that option is only useful if the display
En/na JJussi ha escrit:
I had (up till today) problem with my NVidia, what ever I described in
xorg.conf, output was 60Hz..
Command what fixed everything:
Option FlatPanelProperties Scaling=Native
in Section Screen
That's the same as disabling Force full gpu scaling in
En/na Goga777 ha escrit:
if you disabled full gpu scaling , how upscaling will work really ? what and
how will upscale SD video to 1080p ?
This setting is only useful if your display device can't scale on its own or
the scaling is worse quality. If you enable it the card will always output
Al 26/08/10 10:33, En/na Thomas Hilber ha escrit:
to verify. Even the Xorg.0.log lies about the fact that 50Hz are active
but in reality it uses 60Hz. Maybe nVidia has fixed that in the meantime.
To watch HD broadcasts I use the hdmi output on my laptop.
It isn't configured in xorg but I
En/na Teemu Suikki ha escrit:
OSD is working 100% except for the subtitles. To me it looks like it
is the subtitle font rendering that is bugged, sometimes you can see
unfilled letters where there's only the white outline and inside is
transparent.. This might be VDR bug actually, I have no
Al 17/08/10 18:40, En/na VDR User ha escrit:
On Tue, Aug 17, 2010 at 12:45 AM, martinezmarti...@embl.de wrote:
Unfortunately I can not reproduce it anymore, because in the meantimeI
installed a newer version of xine-lib and the problem disappeared.
What I notice is that using vdpau, on 28e
Al 23/06/10 23:04, En/na Timothy D. Lenz ha escrit:
I also looked at the Actuator plugin because I am interested in getting
something going with c-band and thought maybe it included rotor
commands. Don't it does, doesn't look like it's been updated since
vdr-1.6.0,
Hi, I didn't update the
Al 24/06/10 20:18, En/na Timothy D. Lenz ha escrit:
On 6/24/2010 1:37 AM, Luca Olivetti wrote:
It's a really simple out of tree module, you don't need to hack the
kernel, just to compile the module and insmod it.
It hasn't caused me any problem in the many years I have used it.
BTW
Al 25/03/10 16:08, En/na Jose Alberto Reguero ha escrit:
Patch for xine-lib that don't need to patch remux.c to work.
Today I applied this patch (strange it isn't in xine-lib-1.2 yet) but
there's still no sound on tvehd (vdr 1.7.15, vdr-xine and playing the ts
directly through xine).
Do I
Al 12/06/10 17:23, En/na Jouni Karvo ha escrit:
My current settings in .xine/config (which I found by reading the source
code - is there any documentation anywhere?):
I cannot help with the apparent lack of deinterlacing[*], but those
options are available in the xine gui in the video tab,
Al 16/05/10 14:28, En/na Klaus Schmidinger ha escrit:
Ok, here's a complete patch that attempts to handle audio types.
It is untested, so please use it with care.
Please let me know whether this works with your audio types in
live mode and with replaying recordings.
As of yesterday I can
Al 18/05/10 21:20, En/na Luca Olivetti ha escrit:
Al 16/05/10 14:28, En/na Klaus Schmidinger ha escrit:
Ok, here's a complete patch that attempts to handle audio types.
It is untested, so please use it with care.
Please let me know whether this works with your audio types in
live mode
Al 18/05/10 21:43, En/na Luca Olivetti ha escrit:
(i.e. it only adds SI::AACDescriptorTag)
I must have missed some patch along the way :-/
Ok, they were in the Recording DVB-T HD infrance (sic).
It appears that spain is using the same standard.
Bye
--
Luca
1 - 100 of 226 matches
Mail list logo
