Re: [vdr] probs with new ZDF HDchannels
Hi, this solution worked on my SuSE-System after updating xine-lib. So far, so good. However, on my Debian-System I did update xine-lib as well (without any harder problems) . Then I edited /.xine/config as discribed below. But Xine seems not to react on this entry. I can see that config is written each time I enter Xine-Setup at runtime, but in the Setup-Window (Engine) there is no entry saying Priority for vdpau_264_alter decoder. In consequence, xine does not use this alternative decoder... Hm, as I said, on the SuSE-System everything is fine... The only difference, as far as I can see, is that on Debian xine gui language is english, on the Debian System it is english. Any ideas? Thorsten On 05/01/12 21:18, Reinhard Nissl wrote: Hi, Am 01.05.2012 20:08, schrieb Harald Milz: I just added the new ZDF HD channels (ZDF, KIKA, ZDF neo, kultur and info) and I get strange effects like the ones described in http://www.heise.de/newsticker/meldung/Neue-HDTV-Sender-Ruckler-auf-bestimmten-Receivern-1564225.html. It looks as if the color pallette switched every 0.7 s. This didn't happen with the old ZDF HD channel. My setup is unchanged. Other HD channels are not affected. Did anyone else observe this, and what can we do to fix this? You didn't mention your setup in detail, but I assume you're using a xine-lib VDPAU based solution. In my vdr-xine setup I had to switch from vdpau_h264 to vdpau_h264_alter decoder. The following lines from ~/.xine/config give vdpau_h264_alter a higher priority: # priority for vdpau_h264 decoder # numeric, default: 0 #engine.decoder_priorities.vdpau_h264:0 # priority for vdpau_h264_alter decoder # numeric, default: 0 engine.decoder_priorities.vdpau_h264_alter:1 Bye. -- Thorsten Stuppi ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] probs with new ZDF HDchannels
Sorry - on SuSE it is german... On 05/06/12 17:11, Thorsten_Stuppi wrote: Hi, this solution worked on my SuSE-System after updating xine-lib. So far, so good. However, on my Debian-System I did update xine-lib as well (without any harder problems) . Then I edited /.xine/config as discribed below. But Xine seems not to react on this entry. I can see that config is written each time I enter Xine-Setup at runtime, but in the Setup-Window (Engine) there is no entry saying Priority for vdpau_264_alter decoder. In consequence, xine does not use this alternative decoder... Hm, as I said, on the SuSE-System everything is fine... The only difference, as far as I can see, is that on Debian xine gui language is english, on the Debian System it is english. Any ideas? Thorsten On 05/01/12 21:18, Reinhard Nissl wrote: Hi, Am 01.05.2012 20:08, schrieb Harald Milz: I just added the new ZDF HD channels (ZDF, KIKA, ZDF neo, kultur and info) and I get strange effects like the ones described in http://www.heise.de/newsticker/meldung/Neue-HDTV-Sender-Ruckler-auf-bestimmten-Receivern-1564225.html. It looks as if the color pallette switched every 0.7 s. This didn't happen with the old ZDF HD channel. My setup is unchanged. Other HD channels are not affected. Did anyone else observe this, and what can we do to fix this? You didn't mention your setup in detail, but I assume you're using a xine-lib VDPAU based solution. In my vdr-xine setup I had to switch from vdpau_h264 to vdpau_h264_alter decoder. The following lines from ~/.xine/config give vdpau_h264_alter a higher priority: # priority for vdpau_h264 decoder # numeric, default: 0 #engine.decoder_priorities.vdpau_h264:0 # priority for vdpau_h264_alter decoder # numeric, default: 0 engine.decoder_priorities.vdpau_h264_alter:1 Bye. -- Thorsten Stuppi Dipl.-Ing. Nachrichtentechnik Ingenieurbuero Stuppi Wueppelser Altendeich 14 D-26434 Wangerland Phone: +49 (0) 44 25 - 96 91 11 GSM: +49 (0) 160 - 4 22 83 95 FAX: +49 (0) 180 - 35 51 86 99 86 EMail: i...@stuppi-engineering.de Site: http://www.stuppi-engineering.de ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] probs with new ZDF HDchannels
Success! Thanks, Carsten. On 05/01/12 23:16, Carsten Koch wrote: On 05/01/12 20:08, Harald Milz wrote: Did anyone else observe this, Yes. Same here. It happens only when I play back new channels like 3sat HD with xine. and what can we do to fix this? I installed the latest *xine-lib/xine-lib-1.2-vdpau* http://anonscm.debian.org/hg/xine-lib/xine-lib-1.2-vdpau/ from http://anonscm.debian.org/hg/xine-lib/xine-lib-1.2-vdpau/archive/tip.tar.bz2 However, with that xine-lib, xine-ui now shows some of the buttons (vcd, dvb) twice, leaving no more room for the vdr button. I have found no solution for that yet. I worked around it by entering the vdr mrl on the xine command line. With that workaround, vdr works fine here with the new channels. Carsten. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr -- Thorsten Stuppi Dipl.-Ing. Nachrichtentechnik Ingenieurbuero Stuppi Wueppelser Altendeich 14 D-26434 Wangerland Phone: +49 (0) 44 25 - 96 91 11 GSM: +49 (0) 160 - 4 22 83 95 FAX: +49 (0) 180 - 35 51 86 99 86 EMail: i...@stuppi-engineering.de Site: http://www.stuppi-engineering.de ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] probs with new ZDF HDchannels
Hi, same problem as mentioned by Harald. Setting priority to alternativ Decoder did not solve the problem. However, running xine-lib-1.1.16.1. Regards Thorsten On 05/01/12 21:18, Reinhard Nissl wrote: Hi, Am 01.05.2012 20:08, schrieb Harald Milz: I just added the new ZDF HD channels (ZDF, KIKA, ZDF neo, kultur and info) and I get strange effects like the ones described in http://www.heise.de/newsticker/meldung/Neue-HDTV-Sender-Ruckler-auf-bestimmten-Receivern-1564225.html. It looks as if the color pallette switched every 0.7 s. This didn't happen with the old ZDF HD channel. My setup is unchanged. Other HD channels are not affected. Did anyone else observe this, and what can we do to fix this? You didn't mention your setup in detail, but I assume you're using a xine-lib VDPAU based solution. In my vdr-xine setup I had to switch from vdpau_h264 to vdpau_h264_alter decoder. The following lines from ~/.xine/config give vdpau_h264_alter a higher priority: # priority for vdpau_h264 decoder # numeric, default: 0 #engine.decoder_priorities.vdpau_h264:0 # priority for vdpau_h264_alter decoder # numeric, default: 0 engine.decoder_priorities.vdpau_h264_alter:1 Bye. -- Thorsten Stuppi Dipl.-Ing. Nachrichtentechnik Ingenieurbuero Stuppi Wueppelser Altendeich 14 D-26434 Wangerland Phone: +49 (0) 44 25 - 96 91 11 GSM: +49 (0) 160 - 4 22 83 95 FAX: +49 (0) 180 - 35 51 86 99 86 EMail: i...@stuppi-engineering.de Site: http://www.stuppi-engineering.de ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
