Re: [vdr] adding a budget card to my VDR

2007-11-16 Thread Füley István
Hm... I'm using a DVB-S FF card as TV-out and two budget DVB-T cards as the input. I do not even have a sat dish. My FF does ONLY do TV-out. So the answer appears to be yes then. Thanks for clearing that up. Great! This means, that I can go on with my budget-upgrade, the only issue will be

Re: [vdr] next features?

2007-11-18 Thread Füley István
On Sun, 18 Nov 2007, Klaus Schmidinger wrote: Does anybody have a recommendation for such a board? I'm afraid such a board does not exist, at least it is not an ordinary desktop MB. Novadays an ordinary full ATX mobo has 3 PCI, 1 PCI-e 16x and 1 PCI-e, mATX boards have only 2 PCI ports. All

Re: [vdr] next features?

2007-11-19 Thread Füley István
PCI-Express has nothing to do with PCI, they're different slots. I'm selling hardware, and as I said before, current motherboards does not have 5 PCI slots. The last boards with 5 PCI slots were these: Asus P5P800, with AGP port, socket 775 on board 10/100 LAN, DDR 1 support. I have couple of

Re: [vdr] next features?

2007-11-19 Thread Füley István
hi i bought the p5gc recently; it is the only board with 6x PCI, but without onboard graphics. Ooops, you're right. P5GC has 6 PCI, and Gbit on board! On my list it appears to have only 3 PCI ports, but I looked at the Asus site, and yes, it has 6 PCI ports. Great news (also for me!) :) --

[vdr] HDTV - 2B or not 2B

2007-11-22 Thread Füley István
Hello list, I followed the recent messages about the future of VDR with great interest . I would like to share my recent experiences about HDTV. As I consider myself to be open for new technologies like HDTV is now, I recently bought an HDTV receiver. It doesn't matter who produced it, I

Re: [vdr] HDTV - 2B or not 2B

2007-11-22 Thread Füley István
Oops, that's really not so good... one can't comment about HDTV with a resolution which is not full HDTV : 1920x1080... Ok, this means that my setup is a low-end instead of being average as I stated before, therefore my considerations about HDTV was totally wrong. But to buy a 1000+ Euro TV

Re: [vdr] VDR EPG documenation

2007-11-22 Thread Füley István
Did yiu tried xmltv (tv_grab_xx) and xmltv2vdr ? I'm using it with good results in my country (Hu). István -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ vdr mailing list

Re: [vdr] HDTV - 2B or not 2B

2007-11-22 Thread Füley István
On Thu, 22 Nov 2007, Gregoire Favre wrote: First you could try it on a computer monitor : tremendous !!! Yes, I did it once, about two years ago, on a 24 CRT monitor I tried Euro1080, or something like this, it was DVB-S, MPEG2, but unfortunately my CPU has not enough power to decode it

Re: [vdr] HDTV - 2B or not 2B

2007-11-22 Thread Füley István
On Thu, 22 Nov 2007, VDR User wrote: Btw, do you still prefer music on cassette tape? ;) (just kidding) No, I never liked casette tapes. But I prefer LPs instead of CDs... -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Re: [vdr] No buttons in EnigmaNG

2007-12-17 Thread Füley István
files) but I cant see any of the red-yellow-green-blue buttons at the bottom of each OSD menu. Any ideas as of what to start with? Your OSD area is set to a too high value. Go to Menu/Settings/OSD, and set a smaller area. EnigmaNG uses more memory than standard skins and your 2MB onboard

Re: [vdr] Subtitles - 1.5.11

2007-12-18 Thread Füley István
Here is my setup.conf (part of it) Just try to move your setup.conf from vdr's config dir, and let vdr to create a plain setup.conf and see if it works. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

[vdr] 2 motorized dishes

2008-02-02 Thread Füley István
I recently added to my single-FF-card VDR-box a second card, it's a TT-S2-3200. It's working fine with the multiproto dirvers and vdr-1.5.14, i can watch SDTV on the nexus-s' tv out or HDTV (quite well) via vdr-xine. I have one issue with my dishes. I know that few of the vdr users have

Re: [vdr] Straw poll: stable version 1.6.0 now?

2008-02-03 Thread Füley István
On Sun, 3 Feb 2008, Klaus Schmidinger wrote: Should there be a stable version 1.6.0 now, based on what's in version 1.5.14, but without DVB-S2 or even H.264 support? Yes, I think it would be a good idea to have a stable and up-to-date VDR version in the main distros based on the kernel

Re: [vdr] Straw poll: stable version 1.6.0 now?

2008-02-03 Thread Füley István
For the final result all votes given here on the ML and on vdrportal.de will be added up. Klaus Shall it definitely be 1.6.0? Can't the 1.5.x improvements (subtitle support, utf, etc) be backported to 1.4 branch and call it 1.4.8? -- This message has been scanned for viruses and dangerous

Re: [vdr] 2 motorized dishes

2008-02-04 Thread Füley István
On Sat, 2 Feb 2008, Füley István wrote: I have one issue with my dishes. I know that few of the vdr users have motorized dish, well I have two of them :) The first one, a 1.8m prime focus is controlled fine with Diseqc 1.2 commands in diseqc.conf. But I have a second one connected to my S2-3200

Re: [vdr] 2 motorized dishes

2008-02-04 Thread Füley István
On Mon, 4 Feb 2008, Christian Schuld wrote: On Montag, 4. Februar 2008, Füley István wrote: Yes, thats true :) But IMHO implementing this feature would require only a few dozen lines of addtional source code. May be someone else can do it? Don't look at me ;-) Lol :) That's a good one

Re: [vdr] 2 motorized dishes

2008-02-04 Thread Füley István
implemented in VDR. More generally spoken VDR would need a separate diseqc.conf for each receiving device. I know that. But I'm afraid that's not a priority for Klaus, at least not now when there's a war between features like H.26 and subtitles :) To circumvent this situation with current

Re: [vdr] Straw poll: stable version 1.6.0 now?

2008-02-04 Thread Füley István
You're absolutely right. But: UPC Direct removed couple of days ago the Czech and Hungarian DVB subtitle from BBC Prime (on S19.2E) and now it only has teletext subtitles :( This means that after about a year I have to install teletext subtitle plugin again. Did they give any reason why

Re: [vdr] Straw poll: stable version 1.6.0 now?

2008-02-04 Thread Füley István
I'm not sure about that. At least the ZDF here in Germany uses DVB subtitles now, but I don't think the other broadcasters will follow very fast. I believe the ARD is also looking into this. At any rate, using DVB subtitles would be the optimal solution. Klaus You're absolutely right.

Re: [vdr] 2 motorized dishes

2008-02-04 Thread Füley István
On Mon, 4 Feb 2008, Christian Schuld wrote: During tuning VDR selects the right device using the sourcecaps patch and looks up the right diseqc sequence for that satellite source in diseqc.conf. It should work right away, if you setup sourcecaps and disqec correctly. It works :) Both of my

Re: [vdr] Straw poll: stable version 1.6.0 now?

2008-02-06 Thread Füley István
On Wed, 6 Feb 2008, Morfsta wrote: Isn't that the fun part of it? I don't watch much TV, but I like fiddling and tuning the VDR! What you said here is absolutely right, i totally agree :) -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to

Re: [vdr] vdr-xine buffer usage: messages

2008-02-10 Thread Füley István
I run vdr-xine with the following syntax: xine --fullscreen -r anamorphic --hide-gui -V xv -A alsa -D --post vdr_video --post vdr_audio vdr://tmp/vdr-xine/stream#demux:mpeg_pes to redirect logging from console: xine --fullscreen -r anamorphic --hide-gui -V xv -A alsa -D --post vdr_video --post

Re: [vdr] vdr 1.6.0 - when ?

2008-02-19 Thread Füley István
Please read the following carefully: Date: Sun, 17 Feb 2008 15:46:42 +0100 From: Klaus Schmidinger [EMAIL PROTECTED] Subject: [vdr] [ANNOUNCE] VDR developer version 1.5.15 NOTE: = This is the final step towards a stable version 1.6.0. Please report any bugs as soon as possible, so that I

Re: [vdr] wrong characters in EPG (vdr-1.5.18)

2008-03-26 Thread Füley István
External data source simply need to provide the strings in the encoding used on your local system (presumably UTF-8). Klaus This is what I did in my xmltv grab process: iconv --silent --from-code=ISO-8859-2 --to-code=UTF-8 --output=/opt/tigervdr/xmltv/hu-utf.xml /opt/tigervdr/xmltv/all.xml

Re: [vdr] Output plugin

2008-04-11 Thread Füley István
d) any other solution? X + tvtime, it uses the MPEG2 decoder of the FF card. István -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ vdr mailing list vdr@linuxtv.org

Re: [vdr] OT: ITV HD Testing on Eurobird but receivable with VDR

2008-05-03 Thread Füley István
Great, it's working :) I have vdr-xine + ffmpeg. The sound is not perfect, I think the CPU is not enough (AMD 2350 BE). Here is a screenshot: http://www.tigercomp.ro/~ifuley/itvhd.jpg Thanks for the info, Morfsta. Istvan -- This message has been scanned for viruses and dangerous content by

Re: [vdr] BBC Stream from 28.2E

2008-06-27 Thread Füley István
Hello, I'm watching this channels about couple of years ago. Here is my channels.conf : DEV-STRM-0;BSkyB:12441:VO0S0:S28.5E:27500:2305:2307=eng,2308=eng,2310=eng,2313=eng,2315=eng,2327=eng:2326:0:6880:2:2038:0

[vdr] strange issue with DVB-S2 and VDPAU

2009-11-09 Thread Füley István
Hello list, After 4 yeras of SD-VDR I tried to move to HD with my VDR box. Current hardware: Asus M3N78-VM with GF9400 Athlon BE2350 TT3200 DVB-S2 Software: Ubuntu 9.04 x86 S2API drivers from linuxtv.org/hg/v4l-dvb hg xine-vdpau xine-ui cvs plain vdr-1.7.9 I'm mainly focused on S9.0E source,

Re: [vdr] strange issue with DVB-S2 and VDPAU

2009-11-09 Thread Füley István
On Mon, 9 Nov 2009, Goga777 wrote: are you using vdr-xine plugin 093 or vdr-xineliboutput ? which version ? First I used vd-xine-0.9.3. Then I tried vdr-xineliboutput based on this wiki: http://www.vdr-wiki.de/wiki/index.php/Ubuntu_VDR_DVB-S2_mittels_Xine_und_VDPAU_-_VDR_Plugins what about

Re: [vdr] strange issue with DVB-S2 and VDPAU

2009-11-10 Thread Füley István
your channels list is wrong wrong modulation - should be everytime S1 and O35 or O25 The channels.conf was as vdr generated it, but I tried different modifications, so maybe that time I changed the modulation, but it didn't helped. read please man vdr about this parameters Believe me, I

Re: [vdr] strange issue with DVB-S2 and VDPAU

2009-11-10 Thread Füley István
On Tue, 10 Nov 2009, Gerald Dachs wrote: I will reinstall Ubuntu 9.04 on this weekend, and I hope that will help. This is never a good idea, this way you will never find out the reason for the problem. So there is no warranty that it will not happen again. Gerald I agree. But I miss my vdr

Re: [vdr] strange issue with DVB-S2 and VDPAU

2009-11-12 Thread Füley István
Yes, i have signal, as my LNB cable is coming from the Kathrein's loopthrough, and channels are fine on Kathrein's Enigma2. I also tried to connect my LNB directly to TT3200, with same results. I compared Engima2's lamedb channels list to vdr's channels.conf, and I can see only one difference.

[vdr] deinterlacing VDR-HD on xine?

2009-11-24 Thread Füley István
Hello list, after some unsuccesfull tests with HD-VDR on Ubuntu, I decided to return to Opensuse (i'm using it for SD-VDR for about 4 years). I installed a fresh 11.2 x64 version, compiled v4l-dvb-b8eb9e860545 drivers, installed NVIDIA-Linux-x86_64-190.32, compiled xine-lib-1.2 patched with

Re: [vdr] deinterlacing VDR-HD on xine?

2009-11-24 Thread Füley István
On Tue, 24 Nov 2009, Torgeir Veimo wrote: and in your .xine/config # vdpau: HD deinterlace method # { bob  half temporal  half temporal_spatial  temporal temporal_spatial }, default: 3 video.output.vdpau_deinterlace_method:temporal Or whichever method you'd like to try. Not all hardware

Re: [vdr] Dynamic PIDs

2009-11-27 Thread Füley István
On Thu, 26 Nov 2009, Jouni Karvo wrote: True. I don't know, however, if it is reasonable to request YLE to change the pids before the actual programme stream starts. Couple of weeks ago I reported to the Hugarian Hello HD provider, [1], that they are not sending the correct encoding for

Re: [vdr] Feature request: program guide scroll

2010-03-13 Thread Füley István
Left and Right are used to page up/down within long list, and that's not going to change. However, we could use the Green and Yellow buttons (and additionally the kPrev and kNext keys) for this. Klaus Green and Yellow would be a perfect solution. István -- This message has been scanned for

Re: [vdr] TS to chinapod

2010-10-14 Thread Füley István
From the VDR's INSTALL file: Executing commands before and after a recording: You can use the '-r' option to define a program or script that gets called before and after a recording is performed, and after an editing process has finished. The

[vdr] TT Premium S2-6400

2011-04-19 Thread Füley István
I know that some of you (especially Klaus :) ) already own this card, as a few arrived to dvbshop. I'm asking you to share some experiences, as I hardly understand german discussions on vdrportal. Currently I'm having two VDR machines, one with DVB-S Premium + CRT TV, and another one with

Re: [vdr] TT Premium S2-6400

2011-04-20 Thread Füley István
On 2011.04.19. 20:18, Roland Behme wrote: There are no artifacts while zapping around. The picture turns black, returns and that's it. On 1080i channels there is sometimes a still picture for 0.5 seconds, but afterwards the picture gets fine again immediately. Zapping intervals are around 1-2s

[vdr] eg...@lovete.ro

2011-06-14 Thread Füley István
- DVD-író - webcam 0.3 MP - 2 év garancia 2160.- RON áfástól köszi, Füley István ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] eg...@lovete.ro

2011-06-15 Thread Füley István
Sorry for this, my mistake :( On 2011.06.14. 21:54, Füley István wrote: Szia, ezt a laptopot tudnám ajánlani: Asus X52JU-SX244D - kijelző 15.6 ColorShine HD (1366x768) LCD - processzor INTEL Core i3 350M (2.26 GHz, cache 3 MB, FSB MHz) - memória 2+1 GB DDR3 (1066 MHz) - HDD 500 GB 5400 rpm

Re: [vdr] femon request; historic data

2011-11-10 Thread Füley István
2011.11.11. 3:14 keltezéssel, Torgeir Veimo írta: Am wondering if it would be hard to enhance the femon plugin to show a graph of signal quality and correction statistics? Basically, a histogram with STR, SNR, BER and UNC, so that one doesn't have to oogle the screen constantly to see how

Re: [vdr] Streamdev script to stream audio only?

2011-12-07 Thread Füley István
Just a question: Do you need to transcode the audio stream? Why don't use the elementary audio stream from the DVB source? something like this: http://www.fuley.ro:3014/ES/S1.0W-1536-705-30511+1 István On 2011.12.06. 17:00, Teemu Suikki wrote: Hi! I need a mp3 audio stream of live tv

Re: [vdr] Using some mediaplayer as set top box player for VDR

2011-12-20 Thread Füley István
On 2011.12.18. 1:23, Kartsa wrote: How about DLNA? I found something about DLNA server plugin but was not sure how it was used. If I would install that plugin and byu a DLNA player could that combination work? Or better yet does anyone have any experience on such combination? I'm using vdr +

Re: [vdr] Digital Devices (Linux 4 Media) 4 port (8 tuner) octopus/Duoflex experiences

2012-11-26 Thread Füley István
Hi, I'm not using such a card, but I use a multituner (4 tuner) VDR setup, and I really like this 8 tuner/1slot idea. I have two major problems with my setup; 1. Using PCI cards I'm limited to a maximum of 5 tuners, and I also need to use a PCI gigabit network adapter, so I have 4 tuners. I

Re: [vdr] plugin for DVD images

2013-02-25 Thread Füley István
Hello, I'm using latest xineliboutput in client-server environment, and it works fine for me. I have dozens of DVD images on a nfs share (created with dd), and they are working well, no freezes, no crashes. DVD images (.img) files appear with a letter D ahead in the browser menu, and they're

Re: [vdr] Audio only output device?

2013-03-13 Thread Füley István
Subcribe. On 2013.03.13. 15:40, Teemu Suikki wrote: Hi! Is there any simple audio output device? I have two sound cards in my system. I would like to use one to play audio of one tv channel, while the other is used normally with softhddevice. I can probably hack it with streamdev and some

Re: [vdr] Which epg for Sky UK

2013-04-14 Thread Füley István
Eepg is working fine here, even running in background by vdr's EPG scan. The single issue I have is that the plugin is filling the log with various messages, even if I set loglevel to a low value (1). Regards, István On 2013.04.14. 11:05, Dimitar Petrovski wrote: Hi, I maintain the eepg

Re: [vdr] RFC: one or many positioners?

2013-04-22 Thread Füley István
On 2013.04.21. 15:54, Klaus Schmidinger wrote: (...) The question I have now is: will it be enough to have *one* single positioner in any given setup, or are there actually users who have more than one positioner? (...) Klaus Currently I have 4 tuners, each of them is connected to several

Re: [vdr] VDPAU deinterlacing

2013-10-20 Thread Füley István
2013.10.20. 16:09 keltezéssel, Tony Houghton írta: I recorded it from the 4Seven channel because I forgot about the first showing on C4HD, and it seems only this channel is affected. Maybe they haven't set deinterlacing flags correctly? You should check the following line in

Re: [vdr] Really stupid question about Full-Function DVB Cards

2013-11-17 Thread Füley István
Why do you need a DVB-C card? You can use the FF DVB-S card for playback (output) only: -Pdvbsddevice --outputonly regards, István 2013.11.17. 13:09 keltezéssel, Brian-Imap írta: Hi, dont kill me please.. I'm using a 4 Tuner Cine 2 DVB S2 setup for recording TV programs. For

Re: [vdr] Really stupid question about Full-Function DVB Cards

2013-11-17 Thread Füley István
I'm also using this solution on one of my vdr clients, but of course there is one limitation: you can only playback MPEG2 recordings, no MPEG4 nor HD. 2013.11.17. 14:04 keltezéssel, Brian-Imap írta: On 11/17/2013 12:16 PM, Füley István wrote: Why do you need a DVB-C card? You can use the FF

Re: [vdr] [Announce] streamdev-0.6.1

2013-12-01 Thread Füley István
2013.11.29. 15:19 keltezéssel, Frank Schmirler írta: Hi István, On Fri, 29 Nov 2013 12:17:58 +0200, Füley István wrote The channel not available message is the expected behaviour when a negative priority is configured on the client. With a priority of 0 or higher on the client, the client

Re: [vdr] Really stupid question about Full-Function DVB Cards

2013-12-01 Thread Füley István
Bought a Raspberry Pi and am trying that with Openelec, and that seems to work pretty well as a client. Quite a cheap solution. Cheers Brian You should also try the new rpi output plugin from here:

Re: [vdr] Raspberry Pi, Streamdev + rpihddevice

2014-12-02 Thread Füley István
Hello, Can somebody tell me if using a Rasberry pi + rpihddevice plugin I get picture on R-Pi's analog (RCA) TV out? thanks, István 2014.07.07. 20:08 keltezéssel, Norm Dressler írta: Hi all, I just set up a couple of RPI's with the configuration of a Raspberry Pi, rpihddevice and

Re: [vdr] Raspberry Pi, Streamdev + rpihddevice

2014-12-02 Thread Füley István
Hello, Can somebody tell me if using a Rasberry pi + rpihddevice plugin I get picture on R-Pi's analog (RCA) TV out? I would like to answer myself: it works perfectly :) Tested on Raspberry Pi Model B, 512MB RAM. BTW: awesome plugin, thanks! István

Re: [vdr] Raspberry Pi, Streamdev + rpihddevice

2014-12-20 Thread Füley István
2014.12.20. 17:54 keltezéssel, Brian-Imap írta: What advantages does this software have over the stuff I am using? Well, it depends. I'm using vdr for about 10 years, and I'm used to vdr behaviour (menu, osd). Using rpihddevice plugin on a Raspberry Pi i can continue to use VDR's menu.

Re: [vdr] Raspberry Pi, Streamdev + rpihddevice

2014-12-20 Thread Füley István
2014.12.20. 20:41 keltezéssel, VDR User írta: almost no resources to run VDR + mplayer plugin + mpv-player. With How did you installed mpv-player on RPI? Did you compile it, or are you using Jessie instead of Wheezy? How stable it is? Does it using hw acceleration on PI? thanks, István

Re: [vdr] raspberry pi media player with VDR

2015-03-23 Thread Füley István
Hello, I'n using mplayer with omxplayer, here is my mplayer.sh: pi@pi01 ~ $ cat /var/lib/vdr/plugins/mplayer.sh #!/bin/bash export IFS= omxplayer --key-config /var/lib/vdr/plugins/omxplayer/key.conf $1 killall -9 omxplayer.bin exit and my key.conf: pi@pi01 ~ $ cat

Re: [vdr] from xineliboutput to ... perhaps softhdddevice?

2015-04-17 Thread Füley István
I know, it's not a proper answer for your problem, but I think at the moment the best native vdr client is a Raspberry Pi with Thomas Reufer's great plugin. It's small, cheap and (using with vdr) it's fast. I moved from vdr-sxfe to rpihddevice with all my 3 clients in the house. regards,

Re: [vdr] from xineliboutput to ... perhaps softhdddevice?

2015-04-17 Thread Füley István
2015.04.17. 10:24 keltezéssel, Patrick Boettcher írta: Hi all, And you are using streamdev-server on your vdr-host (which has all the DVB-cards) and client on the RPI? Yes, this is the basic arhitecture, but it is changing for time to time :) I have 4 DVB-S2 cards on my headless server, which

Re: [vdr] from xineliboutput to ... perhaps softhdddevice?

2015-04-17 Thread Füley István
2015.04.17. 13:07 keltezéssel, Reiner Bühl írta: Hello István, which USB DVB-S2 receiver do you use on your Raspberry Pi? It's an old Terratec Cinergy S2: http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_S2 I used it several years ago on my main server, but I had a problem with it: i

Re: [vdr] Media (.mkv) player on Raspberry Pi2 VDR client

2016-02-09 Thread Füley István
2016.02.09. 11:19 keltezéssel, Nicolas Huillard írta: The mplayer plugin seem very old and may not work neatly with the rpihddevice output. I use mplayer plugin on my old RPI, and it's working fine, even with HD .mkv-s. It's patched for using omxplayer instead of mplayer. See details here