I seem to remember that there was a patch to prevent stopping and starting
recording
if audio-pid changes.
Was there ?
*** recording starts here ***
Sep 2 20:47:30 vdr vdr: [2977] setting audio track to 1 (0)
Sep 2 20:48:00 vdr vdr: [2891] switching device 3 to channel 2
Sep 2 20:48:00 vdr
Rene Bartsch wrote:
Videgor is a peer-to-peer hard disc video recorder. With its help it is
possible to record missed broadcasts from the past.
Great, last sunday there was a movie on finnish channel MTV3.
Plse inform how I can record that now.
___
Rene Bartsch wrote:
Hi,
if the configuration (channels, transponders, options) and EPG would be
stored in a MySQL-DB other applications could easily use that data instead
of doing expensive scans of the files again and again.
Maybe there could be a compiler switch or even a command-line option
Carsten Koch wrote:
Channels I do not care for include:
* Channels that I cannot decrypt.
* Channels that only have audio languages that I do not understand.
* Shopping / Advertizing / Porn 0900.
* Sports.
* Radio.
Getting rid of radio is easy, just comment out in file sdt.c
Carsten Koch wrote:
Yes. The following algorithm for NEW CHANNELS would be good:
1) Can I receive any data from thic channel?
(i.e. does the femon plugin show a video rate 0)
If no: do not create a channels.conf entry.
2) Is the audio language among the configured ones?
If yes: Move
upgraded from 1.3.36 to 1.4.2, everything works,
except automatic setting of tv between 4:3 and 16:9 modes.
Works just fine with 1.3.36.
Is 1.4.x eating the WSS or what.
Connection to tv is via composite video, no messing with
voltages or pin 8 or whatever.
Drivers are same in both cases.
Richard Scobie wrote:
Adding my 2 cents, in the hope that others more knowledgable may be able
to reproduce the problem.
Using a Nexus S 2.1 with the latest beta firmware, I find I lose audio
sync when doing multiple yellow button skips to jump through
commercial breaks, where there is a
Halim Sahin wrote:
Hello,
In my channels.conf there are the channels:
atv;Service Provider:12633:v:S42.0E:4800:308+8179:256=eng:0:0:1:1:1:0
SAMANYOLU TV;STV:11951:v:S42.0E:8800:300:301=tur:0:0:1:1:48:0
Vdr start on ATV.
After switching to the second channel, vdr changes the name and
Klaus Schmidinger wrote:
On 06/12/07 18:02, Oliver Joa wrote:
Hi,
i use vdr since a long time, i still use version 1.3.23 on 3 Computers.
The last months/years i did not follow the development. Is there already
a solution for the client-server Problem? I wonder if it is possible to
have 1
that plugin is ancient. Is there somewhere a plugin which compiles
under 1.4.6 or so.
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Nov 7 12:25:58 vdr2 vdr: [1407] VDR version 1.5.11 started
Nov 7 12:25:58 vdr2 vdr: [1407] switched to user 'root'
Nov 7 12:25:58 vdr2 vdr: [1407] found 0 locales in ./locale
Nov 7 12:25:58 vdr2 vdr: [1407] no locale for language code 'deu,ger'
Nov 7 12:25:58 vdr2 vdr: [1407] no locale for
Lauri Tischler wrote:
Nov 7 12:25:58 vdr2 vdr: [1407] VDR version 1.5.11 started
Nov 7 12:25:58 vdr2 vdr: [1407] switched to user 'root'
Nov 7 12:25:58 vdr2 vdr: [1407] found 0 locales in ./locale
Nov 7 12:25:58 vdr2 vdr: [1407] no locale for language code 'deu,ger'
Nov 7 12:25:58 vdr2
Rolf Ahrenberg wrote:
On Tue, 6 Nov 2007, Reinhard Nissl wrote:
The problem for this issue is in cRemux::cRemux():
new cRingBufferLinear(RESULTBUFFERSIZE, IPACKS, false, Result);
IPACKS needs to be replaced by SUBTITLE_PACKS too. Otherwise a packet
larger than IPACKS (up to
Mika Orajärvi wrote:
Hi!
I’m trying to update vdr 1.4.x to 1.5.11. But my vdr keeps segfaulting every
time when it’s started. It takes about 2-3 s after starting the vdr to the
segfault. I’ve tried running it only with xine-plugin (0.8.0) so far and
without any patches on top of vdr. And
Mika Orajärvi wrote:
Hi,
I tried starting vdr without existing setup.conf and by default it seems
that Sans Serif is used. But it seems that I don't have that either since
Vdr still segfaults, now with following backtrace. By the way, is fc-list
the correct way to check if certain font is
[EMAIL PROTECTED] wrote:
Graziano Pavone [EMAIL PROTECTED] writes:
[...]
And you wouldn't mind applying a huge patch on VDR to achieve this goal?
This feature is so interesting that I certainly wouldn't mind, even if it
would a very good feature to be included in the 1.5 vdr release...
Pasi Kärkkäinen wrote:
Btw afaik some countries are broadcasting SD content H.264 encoded.. norway
for example?
Estonia sends all in mpeg-4, i think...
Eesti DVB-T teenus hakkab tööle järgmiste parameetritega:
Modulatsiooni tüüp: COFDM
Modulatsiooniskeem: 64 QAM
Kandvate arv: 8k
Klaus Schmidinger wrote:
From the pictures and description I also don't see any optical
SPDIF output to which I could connect my Dolby-Digital decoder.
AFAIK the HDMI connector also provids the digital audio, but
that would go to the tv set - how would it go to the DD decoder?
Klaus Schmidinger wrote:
Does anybody have a recommendation for such a board?
Asrock ALiveNF5SLI-1394 has seven pci-slots
- 1 x PCI Express x 16 slot (White)
- 2 x PCI Express x 8 slots (Yellow; for NVIDIA® SLI™ only)
- 1 x PCI Express x1 slot
- 3 x PCI slots
Füley István wrote:
PCI-Express has nothing to do with PCI, they're different slots.
I'm selling hardware, and as I said before, current motherboards does
not have 5 PCI slots.
The last boards with 5 PCI slots were these: Asus P5P800, with AGP port,
socket 775 on board 10/100 LAN, DDR 1
Jan Exner wrote:
But there are more people like Klaus who are quite happy with hardware
decoding, and I am grateful he works the way he does.
Hear, hear...
Thankfully no need for totally bloated X-stuff or framebuffers or such..
Just plain minimal text/consolebased system.
VDR _is_ just a
Füley István wrote:
Oops, that's really not so good... one can't comment about HDTV with a
resolution which is not full HDTV : 1920x1080...
Ok, this means that my setup is a low-end instead of being average as I
stated before, therefore my considerations about HDTV was totally wrong.
But
Alasdair Campbell wrote:
Lauri Tischler wrote:
Füley István wrote:
Oops, that's really not so good... one can't comment about HDTV with a
resolution which is not full HDTV : 1920x1080...
Ok, this means that my setup is a low-end instead of being average as I
stated before, therefore my
Klaus Schmidinger wrote:
Should there be a stable version 1.6.0 now, based on what's in
version 1.5.14, but without DVB-S2 or even H.264 support?
YES - if it works without any devel-type drivers, just with
standard kernel as delivered with debian etch
Ludwig Nussel wrote:
Klaus Schmidinger wrote:
Should there be a stable version 1.6.0 now, based on what's in
version 1.5.14, but without DVB-S2 or even H.264 support?
Yes.
It would be pity if that means that the stable version stays at
1.6.0 and doesn't receive any more bugfixes
Event info has disappeared. In ver 1.4.x it is
Feb 19 18:00:20 vdr vdr: [28242] channel 2 (YLE TV2) event Ti
19.02.2008 18:00-18:23 'Oikea kysymys' status 4
Feb 19 18:01:14 vdr vdr: [28242] channel 5 (YLE Teema) event Ti
19.02.2008 18:01-18:02 'Katsaus tulevaan' status 4
Feb 19 18:02:28 vdr
Niko Mikkila wrote:
A last question, with DVB-S, I'm needing two cards if I want to see two
different channels because the channels could be on differents
transponders. But is it true with DVB-T ? In others words: if I want to
see 3 differents channels, do I really need 3 DVB-T tuners ?
Klaus Schmidinger wrote:
On 04/12/08 15:42, Manu Abraham wrote:
If that looks hard, i can push a tree which is a result of the above
outlined steps.
Thanks a lot for providing http://jusst.de/hg/multiproto_plus.
Any instructions somewhere how to stuff that into stock kernel (debian)?
I
Magnus Hörlin wrote:
Lauri Tischler wrote:
Halim Sahin wrote:
Hi,
install the linux-headers package coresponding to your running kernel.
e. G. linux-headers-2.6.24-1-686.
you can get the running kernel's version by typing uname -r
check out the multiproto drivers by typing
hg clone
Lauri Tischler wrote:
Halim Sahin wrote:
Hi,
On So, Apr 20, 2008 at 11:44:24 +0300, Lauri Tischler wrote:
Any particular requirement for kernel version,
i'm running 2.6.18-5-k7 (debian etch)at the moment ?
HMM this kernel is too old!
I think you need min 2.6.22 or better!
I have tested
Does VDR 1.4 - 1.6 work with multiproto drivers ?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -c -DREMOTE_KBD
-DLIRC_DEVICE=\/dev/lircd\ -DRCU_DEVICE=\/dev/ttyS4\ -D_GNU_SOURCE
-DVIDEODIR=\/video\ -DCONFDIR=\/video\ -DPLUGINDIR=\./PLUGINS/lib\
-DLOCDIR=\./locale\ -I/usr/include/freetype2
-I/root/multiproto_plus/linux/include
oleg roitburd wrote:
2008/4/24 Lauri Tischler [EMAIL PROTECTED]:
dvbdevice.c: In member function 'bool cDvbTuner::SetFrontend()':
dvbdevice.c:271: error: 'struct dvbfe_info' has no member named 'delivery'
dvbdevice.c:286: error: 'struct dvbfe_info' has no member named 'delivery
Lauri Tischler wrote:
Lauri Tischler wrote:
Halim Sahin wrote:
Hi,
On So, Apr 20, 2008 at 11:44:24 +0300, Lauri Tischler wrote:
Any particular requirement for kernel version,
i'm running 2.6.18-5-k7 (debian etch)at the moment ?
HMM this kernel is too old!
I think you need min 2.6.22
Jean-Claude Repetto wrote:
Klaus Schmidinger wrote :
Plain vanilly VDR assumes that every DVB-S card can receive all satellites.
Klaus
I hope this will be configurable in VDR 1.8 !
The LNB type should also be configurable for each DVB card (I am still
using a Full-band LNB on my
Igor wrote:
could you explain please how it's possible to connect 3 cards in VDR to 3
LNB's for Hotbird, Sirius, Astra for example
with DiSEq-Cswitch
Simple diagram, using quad-lnb's, input of lnbs are called as
HB-1, HB-2, HB-3, HB-4
SI-1, SI-2, S1-3, SI-4
AS-1, AS-2, AS-3, AS-4
Mattia Rossi wrote:
On Wed, 21 May 2008 16:57:33 +0400
Igor [EMAIL PROTECTED] wrote:
--- snip -
could you explain please how it's possible to connect 3 cards in VDR
to 3 LNB's for Hotbird, Sirius, Astra for example with DiSEq-Cswitch
Hmm, using this switch ?
Brian wrote:
Lauri Tischler wrote:
Igor wrote:
could you explain please how it's possible to connect 3 cards in VDR to 3
LNB's for Hotbird, Sirius, Astra for example
with DiSEq-Cswitch
Simple diagram, using quad-lnb's, input of lnbs are called as
HB-1, HB-2, HB-3, HB-4
SI-1, SI-2, S1-3
Matthias Fechner wrote:
Hi,
I have here an old VDR system running and my DVB-S cards are stopping to
work now (VDR 1.6 and 2xDVB-S cards).
It starts with a lot of distortions and then they stops to record
completely. I have only 0 minute records for my new timers.
In the log file I
JJussi wrote:
Maybe 2x Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz is not enough..
Umm.. why does the log say 1596 MHz ?
model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
stepping: 6
cpu MHz : 1596.000
Loaded latest xineliboutput from cvs, compiled and installed,
it did complain about old libextract, says that 0.5.20 is needed,
xbuntu has 0.5.18, might this be the reason for not working
dvd subtitle menus in Media Player ?
I would need to rape Xbuntu distro then and insert libextract
from Debian
Any chance of having an upgrade to multiproto_plus tree ?
I understand that multiproto_plus is the _only_ tree
sanctioned by Klaus.
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Goga777 wrote:
Any chance of having an upgrade to multiproto_plus tree ?
I understand that multiproto_plus is the _only_ tree
sanctioned by Klaus.
why ? The regular multiproto can work with vdr 1700 too. If you don't have
FF mod card it's no any sense to use
multiproto_plus
Hmmm, would
VDR User wrote:
On Thu, Jul 10, 2008 at 4:13 AM, Lauri Tischler [EMAIL PROTECTED] wrote:
What 'FF mod card' are you referring to ?
There's a hardware hack to allow the full transport stream to be
passed by the Nexus. By default it doesn't so when there's heavy
load, a lot of packets
Lauri Tischler wrote:
VDR User wrote:
On Thu, Jul 10, 2008 at 4:13 AM, Lauri Tischler [EMAIL PROTECTED] wrote:
What 'FF mod card' are you referring to ?
There's a hardware hack to allow the full transport stream to be
passed by the Nexus. By default it doesn't so when there's heavy
load
Trying to google for manual, info or article where all parameters for
xine tvtime command are explained, what they do, why, etc.
No luck yet, any pointers ??
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Using Femon 1.6.1 with VDR 1.7.0 and multiproto shows
odd parameter values, maybe Femon needs a patch ?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Goga777 wrote:
Using Femon 1.6.1 with VDR 1.7.0 and multiproto shows
odd parameter values, maybe Femon needs a patch ?
what do you mean - odd ? There's some missing parameters, I wrote about this
on this week
Odd, as strange, ie. Bandwidth is reported as 7Mhz when it should be 8Mhz
and
Goga777 wrote:
Hi
I'm using the latest femon + vdr 170 + h.264 patch. If I will watch h264
dvb-s2 channels than some information in femon is
missing -
Apid - 0
Spid - 0
Aspect ratio - reserved
Frame rate - 0.00 Hz
Video format - unknown
Resolution - 0x0
Information about audio
I'm trying to force one DVB-T channel on VHF to particular card.
I have three DVB-T cards in system, only card 2 is capable
to tune to VHF frequency, so I want to set this channel
to use allways card 2, I did set CA value in channel.conf to
2 but still it chooses other cards.
What's up duck
Goga777 wrote:
is it good for 1080i/720p channels ?
Well, it works, I can't say, yet, how good it is.
Local provider, YLE, is broadcasting HD (1280x720) on
VHF-channel 8. My VDR shows the picture fine.
It is only testpicture, colorbars, eventually they
will broadcast Bejing Olympics there.
Lauri Tischler wrote:
I'm trying to force one DVB-T channel on VHF to particular card.
I have three DVB-T cards in system, only card 2 is capable
to tune to VHF frequency, so I want to set this channel
to use allways card 2, I did set CA value in channel.conf to
2 but still it chooses other
Grabbed testclip of shuttle takeoff, 1920x1080 resolution
VDR log shows
---
Jul 17 17:45:28 vdr3 vdr: [5831] [xine..put]
cPlaylist::EscapeMrl('/video/ksc_062707_sts117_launch_1080i.mpg')
Jul 17 17:45:28 vdr3 vdr: [5831] [xine..put] --
'/video/ksc_062707_sts117_launch_1080i.mpg'
Jul 17
Alex Girchenko wrote:
Thanks, you've saved my... night! :)
Is there any official description of all of the options in setup.conf?
Can't find it on the wiki.
RTFM, it's all in the MANUAL
___
vdr mailing list
vdr@linuxtv.org
Alex Girchenko wrote:
Lauri, I've found only one manual so far:
http://www.linuxtv.org/vdrwiki/index.php/VDR_User%27s_Manual. It
doesn't contain a word on setup.conf. Also studied the entire wiki,
the man page. Could you please provide a link to the exact manual you
mean? TIA.
File MANUAL
Alex Girchenko wrote:
Lauri, I've found only one manual so far:
http://www.linuxtv.org/vdrwiki/index.php/VDR_User%27s_Manual.
In that page section '1.15 Parameters in the Setup menu' contains
the information you are looking for, expect it is out-of-date, old.
So you are better off by getting
Seppo Ingalsuo wrote:
Hi,
Lauri Tischler wrote:
/usr/src/multiproto/v4l/cx25840-core.c:71: error: conflicting type
qualifiers for 'addr_data'
/usr/src/multiproto/v4l/../linux/include/media/v4l2-i2c-drv-legacy.h:41:
error: previous declaration of 'addr_data' was here
Please try
Seppo Ingalsuo wrote:
Pasi Kärkkäinen wrote:
Maybe try with recent mplayer (from svn).. and give it
-demuxer lavf -lavdopts fast:threads=2 -no-correct-pts or something
similar..
you can also try with threads=4 etc..
mplayer -demuxer lavf -lavdopts fast:threads=4 -nocorrect-pts ...
David Hláčik wrote:
Hello guys,
I have Fedora 9 with lastest kernel. I have Skystar 2 DVB PCI card rev 2.8.
As this revision is using FlexCopII DVB i needed to recompile v4l dvb
modules. I have downloaded lastest v4l using mercurial.
Now my Skystar 2 works fine with Fedora 9 . I am using
Gregoire Favre wrote:
On Wed, Aug 13, 2008 at 04:11:46PM +0300, Lauri Tischler wrote:
Vanilla VDR-1.7.0 does not work with v4l-dvb drivers.
You have two options :
- download multiproto drivers from http://jusst.de/hg/multiproto
make and make install
you may need to patch those
Sascha Vogt wrote:
Hi all,
as my hardware is shipping (went for the ASUS M2N78Pro, GeForce 8300
with an Athlon X2 4850e, hopefully that'll work with VDPAU and HD
videos)
Couldn't find M2N78Pro, do you mean M3N78PRO ?
___
vdr mailing list
Sascha Vogt wrote:
Hi Lauri,
Lauri Tischler schrieb:
Sascha Vogt wrote:
as my hardware is shipping (went for the ASUS M2N78Pro, GeForce 8300
with an Athlon X2 4850e, hopefully that'll work with VDPAU and HD
videos)
Couldn't find M2N78Pro, do you mean M3N78PRO ?
Sorry, you're right, meant
I'm getting tons of messages like...
Jan 21 18:16:47 lassehome vdr: [4716] [input_vdr] vdr_plugin_write: PES too
long (17843 bytes,
max size 8192 bytes), data ignored !
Jan 21 18:16:48 lassehome vdr: [4716] [input_vdr] get_buf_element: big PES
(50251 bytes) !
Jan 21 18:16:48 lassehome vdr:
Reinhard Nissl wrote:
Hi,
after being away 7 month from VDR development I'm pleased to
announce release 0.9.0. You can find it on my homepage as usual:
Wonder where can I find keybindings of vdr-xine.
It seems that keypadkeys in general work (keypad arrows,
keypad enter) but where the hell
Darren Salt wrote:
I demand that Lauri Tischler may or may not have written...
Reinhard Nissl wrote:
after being away 7 month from VDR development I'm pleased to announce
release 0.9.0. You can find it on my homepage as usual:
Wonder where can I find keybindings of vdr-xine.
It seems
gimli wrote:
I saw some things going on in the xineliboutput CVS.
Not sure if TS should work or not.
Seems to be Work in Progress, no picture, no sound,
OSD works and subtitles appear. Patience
___
vdr mailing list
vdr@linuxtv.org
Matti Ropo wrote:
Hi
I am using xxv with my vdr, but lately there has been strange problem.
Couple of channels are missing most of the EPG data. Same data is in the
vdr epg file, but does not appear in xxv. I have tried to look some
erros from log file but haven't found any error
Matti Ropo wrote:
Lauri Tischler wrote:
Some operators (at least Welho) have rearranged their channel id's,
so you may need to re-scan your channels or allow VDR to automatically
update pid's and id's.
I have allowed vdr to search new channels and transponders so it should
also found new
Petri hintukainen wrote:
pe, 2009-02-20 kello 22:02 +0200, Alex Betis kirjoitti:
The problem is that when this script is run in background ( at the
end), the job is shown as stopped.
I've tried to run vdr-sxfe itself in background, it opens the window
and the job stops.
I know there is a
Adding decoding of content descriptor would be nice.
It would allow recording of all soaps or football matches or
whatever without close watching of EPG.
patching of VDRADMIND might be needed.
Cheers
___
vdr mailing list
vdr@linuxtv.org
Rolf Ahrenberg wrote:
On Sun, 22 Feb 2009, Lauri Tischler wrote:
Adding decoding of content descriptor would be nice.
It would allow recording of all soaps or football matches or
whatever without close watching of EPG.
patching of VDRADMIND might be needed.
google: vdr-1.6.0
Petri hintukainen wrote:
Pertti Kosunen wrote:
Lauri Tischler wrote:
- trying to play dvd (Starship Troopers) does not show
correct subtitles, wanted language is defined in VDR.
Maybe this helps also for dvd?:
http://www.kosunen.fi/vdr/matroska-subtitles.diff
Does it work if user
Artem Makhutov wrote:
Is some body working on getting xineliboutput to work vdr-1.7.4?
Latest CVS works.
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Petri Helin wrote:
Artem Makhutov wrote:
Hi,
On Sat, Mar 07, 2009 at 12:22:11AM +0200, Lauri Tischler wrote:
Artem Makhutov wrote:
Is some body working on getting xineliboutput to work vdr-1.7.4?
Latest CVS works.
I tried the lastest CVS, but it does not work for me.
Only the OSD
I wonder if it is possible to somehow make xinelibout automagically
detect correct PrimaryDVB, now, every time I plug/unplug usb-devices
I need to manually edit setup.conf for correct PrimaryDVB.
ie, I have
- dev 1 DVB-S FF PCI
- dev 2 DVB-T PCI
- dev 3 DVB-T USB (occasionaly)
this setup requires
Pertti Kosunen wrote:
Lauri Tischler wrote:
I wonder if it is possible to somehow make xinelibout automagically
detect correct PrimaryDVB, now, every time I plug/unplug usb-devices
I need to manually edit setup.conf for correct PrimaryDVB.
vdr --help
-p--primary Force
Rolf Ahrenberg wrote:
Hi,
new releases of Skinsoppalusikka and RSSReader plugins are now
available.
One might humbly assume that these for VDR 1.6.x only ?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Any working/compiling (with VDR 1.7.5) channelscan plugin anywhere ?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
VDR User wrote:
On Tue, Apr 28, 2009 at 1:20 PM, Simon Baxter linu...@nzbaxters.com wrote:
I've recently taken a different approach altogether.
I use MyMediaSystem (mms) as the front end to my pvr for dvd, movies,
pictures, music, weather, radio etc etc and TV. When you select TV, it
Seppo Ingalsuo wrote:
Off-topic question:
Are there any (free) EDID binary data editors available that are able to
edit the CEA block
http://en.wikipedia.org/wiki/EDID#Extension_Block_Details ?
I'd like to disable 1080i modes from my EDID via CustomEDID option to
avoid Nvidia drivers
VDR User wrote:
On Sat, May 9, 2009 at 4:05 AM, Gerald Dachs v...@dachsweb.de wrote:
Am Sat, 09 May 2009 12:38:39 +0200
schrieb Klaus Schmidinger klaus.schmidin...@cadsoft.de:
It also raises several questions:
- When should such a recording be deleted?
If it gets deleted as soon as replay
Tony Houghton wrote:
It would also be nice if
VDR had a logfile to itself instead of syslog.
Fix your syslogd and RTFM :)
-l level, --log=level
Set logging to level. 0 = no logging, 1 = errors only, 2 = errors and info,
3 = errors, info and debug.
The default logging level is 3.
If logging
Klaus Schmidinger wrote:
On 05/23/09 12:44, Carsten Koch wrote:
On Sat, 2009-05-23 at 11:47 +0200, Klaus Schmidinger wrote:
...
You could also remove all unwanted channels from your list and set
DVB/Update channels to names and PIDs. Then the EPG scan would
only switch through the desired
Goga777 wrote:
There used to be a plugin ,'autosort' i believe, which did
some of those things.
http://www.vdr-wiki.de/wiki/index.php/Autosort-plugin
http://www.copypointburscheid.de/linux/autosort.htm
home page of that plugin doesn't work
where is it possible to download that plugin
Carsten Koch wrote:
I did a
cd /usr/src/v4l-dvb/linux/include/linux
ln -s /usr/src/linux-2.6.27.21-0.1/include/linux/compiler.h .
that fixed it.
This has been a problem with all drivers for a long time,
whenever i grab complete new set of drivers, i need to add
compiler.h to them.
Lauri Tischler wrote:
Carsten Koch wrote:
I did a
cd /usr/src/v4l-dvb/linux/include/linux
ln -s /usr/src/linux-2.6.27.21-0.1/include/linux/compiler.h .
that fixed it.
This has been a problem with all drivers for a long time,
whenever i grab complete new set of drivers, i need
VDR User wrote:
VDR-1.7.8 needs xine-0.9.3.
Well, unfortunately xine-0.9.3 does not exist, yet :)
vdr-xineliboutput does not compile either.
Maybe after the holydayseason is over, september-october...
___
vdr mailing list
vdr@linuxtv.org
Seppo Ingalsuo wrote:
On Sun, 2009-08-23 at 09:05 -0700, VDR User wrote:
Did you know that Klaus is giving VDR a new 24bit OSD? High
resolution/high color will soon be in vanilla VDR, no expensive eHD
card or otherwise required. ;)
That's nice but my main problem with vdr is having two
Klaus Schmidinger wrote:
Maybe it's ok if I use this opportunity to ask if somebody could
point me to a complete idiot's guide to installing the eHD software
(meaning the necessary software that goes into the eHD itself, as
well as the latest version of their plugin). I know, I could search
for
Gavin Hamill wrote:
On Sat, 2009-09-05 at 08:18 -0700, VDR User wrote:
On Sat, Sep 5, 2009 at 6:24 AM, Lauri Tischlerl...@iki.fi wrote:
Somewhat related question is, is there some solution to have
HD-VDR without X, other than eHD ?
Not that I'm aware of but by no means have I researched that
Luca Olivetti wrote:
The asus P5N7A-VM motherboard seems a good candidate, is its integrated
9300 graphics powerful enough for good deinterlacing?
P5N7A does not have enough slots :(
Any comments about M4N78 PRO ?
___
vdr mailing list
Artem Makhutov wrote:
Hi,
On Wed, Nov 18, 2009 at 10:40:38AM +0200, Lauri Tischler wrote:
Luca Olivetti wrote:
The asus P5N7A-VM motherboard seems a good candidate, is its integrated
9300 graphics powerful enough for good deinterlacing?
P5N7A does not have enough slots :(
Any comments
Paul Menzel wrote:
Am Freitag, den 25.12.2009, 13:38 -0800 schrieb VDR User:
[…]
However, in my case since VDR is my main tv/media source, it would be
annoying to have to boot the computer every time someone wanted to
watch/listen to something, therefore the box stays on 24/7. Thus,
never
93 matches
Mail list logo