could tune to the channel but not
demodulate the DVB-T2 signal.
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I'm using VDR in Bellevue, WA - but only analog with a Hauppauge PVR-150
card.
The limited FTA channels in DVB-S (Satellite dish) stopped me buying such a
card. Also DVB-T won't work as USA doesn't use that standard (ATSC).
Neither will DVB-C as they don't use that either!
- Original
!
One more question: Does anybody know what format does comcast send his
digital programs over cable, I saw that they offering some digital
packages as pay channels.
Regards
Marco
Simon Baxter schrieb:
I'm using VDR in Bellevue, WA - but only analog with a Hauppauge PVR-150
card
Hi.
I'm looking at getting the following from dvbshop.net
Technotrend Remotecontrol SET
Technotrend Technotrend Dual Tuner Package (Technotrend Premium S2300 (Rev
2.3) modded)
RGB/S-Video J2 Extension for Technotrend Premium (for component/RGB-out)
Has anyone got any advice on getting this
I'm confused. I thought component video was RGB? s-video uses luminance
and chrominance, component uses RGB - am I wrong?
Component video is color difference, S video is very similar to
component, as there is a Y(luminance) but there are 2 color signals
instead of one (R and B), the
Is there any support for the DVD plugin?
The sourceforge site forums seem to be empty as well !
- Original Message -
From: Simon Baxter [EMAIL PROTECTED]
To: VDR Mailing List vdr@linuxtv.org
Sent: Tuesday, October 10, 2006 9:26 PM
Subject: Re: [vdr] DVD plugin - sound jerky??
It's
Hello.
Can anyone help me with where to get support for this plugin?
It still seems to partially work in VDR-1.4.1 - but I don't know where to
turn.
Are people afraid to respond because of CSS or something???
Thanks
- Original Message -
From: Simon Baxter [EMAIL PROTECTED
marks - which is every 5-10
minutes on some DVDs
Stefan Lucke
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
May be you can analyse the structure of the DVD using IfoEdit ?
I'm not familiar with that? Will have a look
Chapters are a misconception.
DVD consist of Domains, TitleSets, Titles, PGCs, PGs and Cells (top to
bottom structure).
Chapters are in fact only pointer markings optionally
Hi.
I've been googling this PPPClear thing - It looks like it might be to do
with the vdr-xine plugin.
http://linvdr.org/mailinglists/vdr/2004/11/msg00736.html
talks about multiple audio channels a transfer patch in VDR 1.3.14
There might also be something in toggling the dolby selection in
I'm building a remote VDR device on a Dell GX260 SFF PC, which has 1x AGP
low-rise slot and 1x PCI
I'm having trouble finding a selection of video cards which will fit in
the SFF case.
Can someone recommend a card? It needs to have s-video out (doesn't need
to have VGA - but must have
I've been trying all the available modes in the streamdev-server to find the
one that suits my needs best.
I have 2 VDRs, a server and a client. Ideally, I'd like them both to be
able to change channel - and when the transponders need to change, one will
just force the other to change as
Simon Baxter [EMAIL PROTECTED] writes:
I've been trying all the available modes in the streamdev-server to
find the one that suits my needs best.
I have 2 VDRs, a server and a client. Ideally, I'd like them both to
be able to change channel - and when the transponders need to change,
one
I've been trying xineliboutput for the first time - looks like it will solve
all sorts of problems I've been having, if I can get over these ones
Problem number 1:
If I start the plugin with :
vdr -Pxineliboutput --local=sxfe --video=xv --audio=alsa --remote=none
I get a letterbox window
I get a letterbox window in the middle of the gnome screen. So I tried:
-P'xineliboutput --fullscreen --local=sxfe --video=xxmc --audio=alsa
--remote=none'
...
When I use vdr-xine, I start it with
xine --fullscreen --hide-gui -V xv -A alsa -D --post vdr_video --post
vdr_audio
When I use vdr-xine, I start it with
xine --fullscreen --hide-gui -V xv -A alsa -D --post vdr_video --post
vdr_audio vdr://tmp/vdr-xine/stream#demux:mpeg_pes
for xine use this
-Pxineliboutput --primary --local=none --remote=37890
-Pxineliboutput --primary --local=sxfe --remote=none
I'm
Hello,
I'm having intermittant problems when replaying vdr recordings with
xineliboutput. Every few minutes I get an audio/video slip/break and
stdout reports:
video_out: throwing away image with pts 124350653 because it's too old
(diff
: 29229)
Is this a xinelib message? I'm
video_out: throwing away image with pts 124350653 because it's too old
(diff : 29229)
Is this a xinelib message?
URL:http://xinehq.de/index.php/faq#throwingawayimage, though I suspect
bugginess somewhere.
I'm going to try a CVS snapshot of xine-lib 1.1.2 from August 2006, see if
that
video_out: throwing away image with pts 124350653 because it's too old
(diff : 29229)
Is this a xinelib message?
URL:http://xinehq.de/index.php/faq#throwingawayimage, though I suspect
bugginess somewhere.
I'm going to try a CVS snapshot of xine-lib 1.1.2 from August 2006, see if
that
Incidentally, the messages don't bother me. It's the video/audio slippage
every 2-3 minutes that annoyes the wife :)
Something weird's happening. When I run vdr-xine, I get no slippage. When
I run xineliboutput I get:
video_out: throwing away image with pts 4299359 because it's too old
I'm having intermittant problems when replaying vdr recordings with
xineliboutput. Every few minutes I get an audio/video slip/break and
stdout
reports:
video_out: throwing away image with pts 124350653 because it's too old
(diff
: 29229)
Is this a xinelib message? I'm running a xine-lib
I'm having intermittant problems when replaying vdr recordings with
xineliboutput. Every few minutes I get an audio/video slip/break and
stdout
reports:
video_out: throwing away image with pts 124350653 because it's too old
(diff
: 29229)
I've resolved this by using:
-Pxineliboutput
cPvrDevice::SetPid 301 5 1
pvrinput: 11:39:06 cPvrDevice::SetPid 300 6 1
pvrinput: 11:39:06 cPvrDevice::OpenDvr
Why am I getting IVTV_IOC_G_CODEC failed ??
Simon
I've just received my new PVR-500 card and have it happily installed and
working with ivtv 0.9 (svn)
I figure since the FM radio
pvrinput: 11:39:05 IVTV_IOC_G_CODEC failed, 22:Invalid argument
pvrinput: 11:39:06 Detected input 0: Tuner 1
pvrinput: 11:39:06 IVTV_IOC_G_CODEC failed, 22:Invalid argument
pvrinput: 11:39:06 found 2 PVR devices
It appears this is a problem with pvrinput plugin using the old
IVTV_IOC_G_CODEC
Simon Baxter wrote:
I'm trying to get my PAL PVR-500 working in a non-PAL country. May sound
weird, but I'm preparing to move back to New Zealand.
Correct me if I'm wrong, but isn't NZ a PAL country? At least from what I
know the Australian area is mostly using PAL.
Cheers,
Udo
Yeah
Thought I might create a dedicated thread for this.
Has anyone heard anything about an update to pvrinput, to support the new
2.6.18 v4ls spec rather than relying on ivtv for codec selection?
If you run ivtv version 0.8.0 you'll run into this. 0.8.0 no longer
supports IVTV_IOC_G_CODEC and
What command line are you starting vdr with?
try adding '-l 3' to the command line
There should be some messages in /var/log/messages, and also in the shell
screen where VDR was started.
I'd recommend building from sources and setting the recordings directory in
Make.config
- Original
Hi.
I've tried adjusting the picture by adding:
gui.vo_brightness:35616
gui.vo_contrast:33900
gui.vo_saturation:42940
...to ~/.xine/config_xineliboutput
but it has no affect.
Any ideas?
___
vdr mailing list
vdr@linuxtv.org
Am 04.02.2007 um 17:10 schrieb Martin Prochnow:
here a new release of my ExtRecMenu-plugin.
Many thanks for the new release, especially moving between partitions
and the new info menu (channel of the recording, filesize of the
recording etc) were things i was looking for!
Ciao,
I've asked this before, last year, but never had a response.
How do I configure radio channels in VDR.
My channels.conf has:
Classic Hits:9:I999C0:C:0:0:300:305:A1:12003:1:1006:0
But I think I'm picking up the wrong device, as I hear no audio. I have a
single PVR-150 with ivtv and the
It looks like this plugin does something wrong with the analog radio on
the OEM PVR-150 card.
With channels.conf set to:
Radio 91ZM:90900:I999C0:C:0:0:300:305:A1:12003:1:1007:0
v4l2-ctl --all looks like this:
Audio input : 0 (Tuner 1)
Frequency: 1454 (90.875000 MHz)
Video standard =
sound is distorted an finally
sound
stop. There is not any messages in the log. I don't know if is pvrinput
or
xineliboutput fault.
Jose Alberto
Jose Alberto
El Martes, 13 de Febrero de 2007 11:01, Simon Baxter escribió:
It looks like this plugin does something wrong with the analog radio
sound is distorted an finally
sound
stop. There is not any messages in the log. I don't know if is pvrinput
or
xineliboutput fault.
Jose Alberto
Jose Alberto
El Martes, 13 de Febrero de 2007 11:01, Simon Baxter escribió:
It looks like this plugin does something wrong with the analog radio
have is that after a while sound is distorted an finally
sound
stop. There is not any messages in the log. I don't know if is pvrinput
or
xineliboutput fault.
Jose Alberto
Jose Alberto
El Martes, 13 de Febrero de 2007 11:01, Simon Baxter escribió:
It looks like this plugin does something
In order to get the correct info from a v4l2-ctl --all:
Format:
Type: VBI Capture
Sampling Rate : 2700 Hz
Offset : 248 samples (9.18519e-06 secs after leading
edge)
Samples per Line: 1440
Sample Format : GREY
I'm looking for a way to execute a command whenever a channel change is
selected. I think part of the 'sky' plugin is close to what I want -
without the stream type changing part.
I have a PVR-150 running with the pvrinput plugin, attached via composite
to a digital cable STB. I have led-xmit
Has anyone done anything like this?
Thanks!
Simon
I'm looking for a way to execute a command whenever a channel change is
selected. I think part of the 'sky' plugin is close to what I want -
without the stream type changing part.
I have a PVR-150 running with the pvrinput plugin, attached
no experience at this level!
Would like to understand - and have been modifying and tuning stuff within
VDR for a while, but am totally lost when it comes to the real
inner-workings. Any help would be gladly appreciated!
Thanks
Simon
___
vdr mailing list
Hi.
Anyone know a good reference on how to write VDR plugins?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Simon Baxter a écrit :
Hi.
Anyone know a good reference on how to write VDR plugins?
If you understand french :
http://famillejacques.free.fr/vdr/articles/vdr-05/
Jean-Claude
Maybe a little :)
Thanks
___
vdr mailing list
vdr@linuxtv.org
pvrinput
sourced audio, what is the easiest way to 'copy' the audio to the other
channels, so I at least get sound out all the speakers?
Hmm, perhaps this is a setting in xine...?
Thanks
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org
I'm running vdr-pvrinput and vdr-xine. Until recently I was living in the US
(NTSC land), but moved back to NZ (PAL land) recently.
I'm also now playing at 16:9
Everything I watch or record here is at full screen, but all the recordings I
made in the US are cropped with verticle black bands
My media box has 6 channel output LF,RF,LR,RR,C,SW which I'm using with
ALSA. Mplayer plays through all channels fine (settings in
~/.mplayer/config), but VDR sourced audio only plays in stereo from the
LR,RF output.
Just add
--post-plugin upmix
My command line was as follows:
xine
I'm having problems processing epg into VDR.
I have the following channels:
LSTC
250-1 TV1-Cable:112250:C0:C:0:301:300:305:A1:1796:0:0:0
250-2 TV2-Cable:119250:C0:C:0:301:300:305:A1:1908:0:0:0
250-3 TV3-Cable:126250:C0:C:0:301:300:305:A1:2020:0:0:0
250-4
man 5 vdr:
EPG DATA
...
E event id start time duration table id version
Try something like
E 0 1175578200 3600 0
and make sure each event gets a unique event id (the first number).
In Perl, for instance, you could do
$Id = $time / 60 % 0x; # this gives us
1176231600 7200 0
T Breakfast
D Breakfast
e
c
.
QUIT
Can anyone help me??
Thanks heaps!!!
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I'm now getting my xml EPG from a different source, and am having problems
getting the perl script to run properly. My perl knowledge is poor (to
say the least!!)
The problem is, the epg xml I'm getting has the channel= at the wrong
end of the programme sequence.
So instead of:
point me in the right direction?
Thanks
Simon
___
vdr mailing list
[EMAIL PROTECTED]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
El Viernes, 13 de Abril de 2007, Simon Baxter escribió:
My question is this. I need to modify the channel sent, so that double
(or triple) channel numbers are sent as '6 3' or '1 1 7' rather than
'63'
or '117'. i.e. put spaces between the letters.
You can try something like
man 5 vdr:
EPG DATA
...
E event id start time duration table id version
Fixed it - there was a problem with xmltv2vdr matching the wrong fields in
the .xml listing.
___
vdr mailing list
[EMAIL PROTECTED]
it decrypt
multiple channels simultaneously like the above for FTA???
Thanks
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Question is, when you're using a CAM to decrypt channels, can it decrypt
multiple channels simultaneously like the above for FTA???
AFAIK, yes, under certain conditions:
1) vdr 1.5.x needed
2) your CAM must support multiple streams
3) your CAM must respond to query request
Thanks
Any
Hi everyone.
Can you use a fully-featured card (with MPEG decoder) without using the
decoder?
I've read you need to attach an external cable from the card audio output to
the PC soundcard. Is this necessary???
Can you just use xineliboutput or vdr-xine as a soft device instead??
I'm looking at getting a Technotrend C-2300 card.
The card specs on dvbshop.net indicate:
Bu 1 Audio-In 3,5mm Jack-plug
Bu 2 Composite-Video-In Cinch-female connector
Does this mean there's an MPEG2-encoder onboard as well? How do I use
this? With v4l2/ivtv and pvrinput?
Thanks
dvbshop would have done that!!)
Thanks
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Has anyone done any work (or written a plugin) to update the standard OSD?
I've not done this yet, but see you can change font size and colours using
themes, but I was thinking more than this.
I've now replaced my TV with a big high-res flat screen that could fit way
more text etc on the screen.
Hi!
Yes there are some VDR-Skin-Plugins around. For example mine at
http://andreas.vdr-developer.org/enigmang
What output device do you use?
You should be aware that e.g. Full-Featured DVB-S cards have limited OSD
capabilities (~90kb). So hires hi-color OSD will be a problem here.
Hi
I have a couple of boxes running VDR on a network. I've ended up in this
situation because of a lack of PCI slots for capture cards, and a
PVR-500/Via chipset incompatability.
I can use the remote menu plugin to set timers in the 2nd box from the 1st
one, which is great.
I run vdradmin, and
Hi.
I can't get this plugin to work - I get a remote timers and remote
schedule unavailable message on the 'client'.
svdrp works - and so does remoteosd.
Any ideas?
___
vdr mailing list
vdr@linuxtv.org
Hi.
I've just taken receipt of my TT-1500 DVB-C card, but can't find any
channels.
I've run 'dvbsnoop -s pidscan' but find nothing - but as I don't know what
to tune the card to, I guess that's expected?
I found one reference to frequencies and encoding someone had on google and
created a file
I've just added a DVB-C card into my machine (had been using pvr's for a
while) and am getting a compile error:
/usr/src/development/v4l-dvb/linux/include/linux/dvb/osd.h:107: error:
variable or field '__user' declared void
/usr/src/development/v4l-dvb/linux/include/linux/dvb/osd.h:107: error:
I've just added a DVB-C card into my machine (had been using pvr's for a
while) and am getting a compile error:
/usr/src/development/v4l-dvb/linux/include/linux/dvb/osd.h:107: error:
variable or field '__user' declared void
/usr/src/development/v4l-dvb/linux/include/linux/dvb/osd.h:107:
Can anyone suggest a method to scan for channels with a non-standard
symbol rate?
My provider does not use 6900 or 6875.
Thanks
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Simon Baxter wrote:
Can anyone suggest a method to scan for channels with a non-standard
symbol rate?
My provider does not use 6900 or 6875.
Thanks
Simon
Usually, you can specify the symbol rate within the initial scan file for
the dvb scan utility. But this does mean, you
have
Hi.
Lots of posts recently - many of which I've resolved!
The latest -
I've added an Irdeto CI adapter to my TT-1500 Budget card. But I can't
decrypt channels, and get the following errors:
In /var/log/messages:
Apr 30 19:31:26 media1 vdr: [2774] CAM 1: module present
Apr 30 19:31:28 media1
Usually, you can specify the symbol rate within the initial scan file
for
the dvb scan utility. But this does mean, you
have to know the symbol rate of your cable provider.
Thanks - got the SymbolRate from my provider, and I now have a
channels.conf file.
Problem is now I get a
Looks like VDR can do ioctl() calls on the CI file handle, but
no write operations. Do you have write access to /dev/dvb/adapter0/ca0?
Klaus
Hmm, I'm running as root. And just in case, I :
chmod -R 666 /dev/dvb/adapter0/*
chown -R vdruser /dev/dvb/
[EMAIL PROTECTED] vdr-1.5.2]# ls -l
.
Can anyone suggest anything? Does this look like faulty hardware??? It
does it in 2 different machines.
Thanks
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[EMAIL PROTECTED] gnutv]# ./gnutv -cammenu
en50221_tl_poll: CAWrite failed
en50221_stdcam_llci_poll: Error reported by stack:-2
snip
Can anyone suggest anything? Does this look like faulty hardware??? It
does it in 2 different machines.
It is indeed not flaky hardware as i wrote
[EMAIL PROTECTED] v4l-dvb]# gnutv -cammenu
en50221_tl_poll: CAWrite failed
en50221_stdcam_llci_poll: Error reported by stack:-2
I took my Irdeto CAM and SmartCard to a friend's place today - it's
definitely not a hardware problem. In his DreamBox he could access the CAM
Menu, decrypt etc. He
Does anyone have a TT-1500 DVB-C card working with an Irdeto CAM?
Or in that case, any other CAM?
If so, what kernel are you running? What v4l-dvb snapshot??
I'm lost!
Thanks
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi
Question for you. When you FF/REW etc, the .xpm file for the FF etc (i.e.
plugins/skinenigmang/icons/replay/fastForward1.xpm) is overlaid on a
white/blue icon that looks kind of like a video tape.
Where is the xpm for this blue/white thing? I'd like to edit it
Thanks
Hi.
I use remoteosd to schedule and record programs on a remote device, which I
access from the primary device via an NFS share.
Problem is, new programs only appear in the primary device once VDR
restarts.
Is there a way to refresh recording directories without restarting VDR?
I'm getting the following error when I try and compile epgsearch-0.9.19
Plugin epgsearch:
make[1]: Entering directory
`/usr/src/development/vdr-1.5.2/PLUGINS/src/epgsearch-0.9.19'
g++ -g -O2 -Wall -Woverloaded-virtual -fPIC -c -D_GNU_SOURCE -DPLUGIN_NAME_I
18N='epgsearch'
I'm getting the following error when I try and compile epgsearch-0.9.19
Plugin epgsearch:
make[1]: Entering directory
`/usr/src/development/vdr-1.5.2/PLUGINS/src/epgsearch-0.9.19'
g++ -g -O2 -Wall -Woverloaded-virtual -fPIC -c -D_GNU_SOURCE -DPLUGIN_NAME_I
18N='epgsearch'
(Windows) GBPVR
My question is, can anyone suggest any other tools which test CAMs?
Also, I don't really understand how the CAM is accessed - can anyone point
me in the right direction?
Thanks!
Simon
___
vdr mailing list
vdr@linuxtv.org
http
Is there a way in VDR to reformat recordings made in 4:3 to play back in
16:9 ?
-Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hey Simon,my answer sounds maybe stupid, but I always have all output to
720x576. I use vdr-xine, xine is set to no scale. So for example: we
have shows on RTL or arte in 16:9 amorph which means, that we have 16:9
but with 720x576 pixels. My Sony 16:9 TV takes then the PAL and shows
Hi.
I've posted loads of posts on this and the linux-dvb forums, trying to get
help with my Irdeto CAM and TechnoTrend 1500-C. I've had almost no
responses, and certainly found no help anywhere.
___
vdr mailing list
vdr@linuxtv.org
Hi
I've recently got my TT-1500C, CI and Irdeto CAM working. My cable
provider
only provides encrypted channels, so can't do any testing free-to-air
channels.
Here's my modprobe in dmesg:
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt Link [PIN3] enabled at IRQ 15
On Mon, June 4, 2007 21:31, Simon Baxter wrote:
I've recently got my TT-1500C, CI and Irdeto CAM working. My cable
provider only provides encrypted channels, so can't do any testing
free-to-air channels.
...
Can anyone suggest any other testing I can do?? It looks like it should
I'm trying to get a picture out of my budget TT-C1500 card/ci/cam and
having little success (but am making progress!). My cable provider
encrypts everything - so it has to run through the CAM.
the dvb-apps 'dvbstream' gives me the following:
/usr/src/development/dvbstream-0.5/dvbstream -s
You have the wrong format in channels.conf
check 'man 5 vdr'
- Original Message -
From: Pirlouwi
To: vdr@linuxtv.org
Sent: Monday, June 11, 2007 10:15 PM
Subject: [vdr] How to use vdr with DVB-T - channels.conf error
Hello everybody,
I live in Belgium, and would like
control do you use on the clients
running xine and how does it work to send the command to the vdr session?
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
didn't solve the problem.
femon 1.1.3
xineliboutput 1.0.0-rc2
vdr 1.4.7
Any ideas?
Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
:530:0:606:201:182:2:0
Juice 2;T:594000:M64:C::577:578:0:606:204:182:2:0
Food TV;T:602000:M64:C::817:818:0:606:303:182:3:0
-Simon
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi
I have an Irdeto CAM in a TechnoTrend budget DVB-C card.
vdr doesn't seem to even attempt QUERY to decrypt more than one stream in
the TS. If I record one stream and try and watch another in the same
boquet, I just get channel not available.
This is my channels.conf:
Sky
Read herring on this - was nothing to do with VDR.
Problem with my nvidia accelerator driver on high-bandwidth streams causing
dropped frames
- Original Message -
From: Simon Baxter [EMAIL PROTECTED]
To: VDR Mailing List vdr@linuxtv.org
Sent: Tuesday, July 24, 2007 9:29 PM
Subject
715:
case AOT_CA_PMT_REPLY: {
dbgprotocol(Slot %d: == Ca Pmt Reply (%d),
Tc()-CamSlot()-SlotNumber(), SessionId());
if (!repliesToQuery) {
dsyslog(CAM %d: replies to QUERY - multi channel
decryption
possible, Tc()-CamSlot()-SlotNumber());
Anyone know if development on these for vdr-1.5.x is underway?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
to show the audio stream being played?
Thanks
Simon
vdr-1.4.6 locally
vdr-1.5.2 remote recorder
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Can anyone suggest where I can find which CAMs support QUERY ?? If
yours
does, can you tell me which model it is??
I use an Alphacrypt with the latest firmware and this one does
react to QUERY.
Klaus. I have now received new Alphacrypt and Alphacrypt Light CAMs to
test.
Can you help me?
Whats your mount-options? I'm doing the same with these options:
acregmax=30,acdirmin=10,acdirmax=30,intr,noatime,rsize=8192,wsize=8192
and have no Problems ..
I've been _very_ generic:
10.1.1.15:/media/video/vdr/media/video/vdr/REMOTE nfs
rw,user,sync 0 0
Thanks - will
I've been running a Shuttle SK43G with 2.2Ghz AMD, silentPC fan, silent 250W
psu and replaced all the mobo fans with heatsinks for 3 years.
time to replace. The fan is still quiet, but now the case vibrates a
little, and the whole thing runs about 61 degrees - which isn't ideal.
I'd like to
Simon Baxter a écrit :
I'd like to go fanless and cool. What I like about the shuttle is it's
size. The 1x PCI is fine, as is the VIA unichrome VGA s-video out.
Any ideas on a small compact fanless (DEAD quiet) case motherboard??
* mobo : compact + fanless = VIA (new EX is really well
Nice setup - but the case is too big for me. I have a single glass panel
shelf, the case can be 11.5 deep maximum..
I went for a heavily customized CD player... Count 1-2 days drilling and
cutting to fit the mobo inside, with all planned before that.
Hmmm - cool idea!
I'm building up a fanless VDR client, and am looking at the VIA EPIA SP8000E
with tv-out.
Is this 800Mhz processor with MPEG2/4 accelerator fast enough for the vdr-xine
plugin?
What kind of CPU % can I expect? With my Shuttle AMD 2.2G and unichrome
accelerator, and vdr-xine, the cpu sits
just use windows media wit the k-lite codec pack
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
- Original Message -
From: Torgeir Veimo
To: VDR Mailing List
Sent: Monday, September 17, 2007 9:18 AM
Subject: [vdr] Exist: windows media player that plays unaltered
or try:
http://ftp.isu.edu.tw/pub/Windows/softking/soft/en/k/klcodec340f.exe
- Original Message -
From: Torgeir Veimo
To: VDR Mailing List
Sent: Monday, September 17, 2007 9:18 AM
Subject: [vdr] Exist: windows media player that plays unaltered vdr files?
Subject says it
hello all
im wondering is there anyone in the usa doing local off air tv with vdr...
if so.. what have you done to vdr to get analogtv and atsc digital tv...
what plugins are you using.. how are you getting guide info for
channel services...
i do know my hdtv picks up some info about
1 - 100 of 298 matches
Mail list logo