Re: [vdr] VDR doesn't always switch channel correctly

2007-11-10 Thread Reinhard Nissl
Hi,

Igor schrieb:

 is it possible to disable this feature , because sometimes it's useless.
 For example, if I with rotor-plugin will try to move manually the dish to 
 east or west , this patch automatically will come back the dish to reference 
 rotational position, because LOCK was disappeared.

Well, we both know that VDR is not prepared for rotor dishes. Please try
the following to disable resending the DiSEqC commands:

- Locate the following code in dvbdevice.c, cDvbTuner::Action():

  case tsTuned:
   if (Timer.TimedOut()) {
  tunerStatus = tsSet;
  diseqcCommands = NULL;

- Change the last line to:

  //diseqcCommands = NULL;

Bye.
-- 
Dipl.-Inform. (FH) Reinhard Nissl
mailto:[EMAIL PROTECTED]

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] VDR doesn't always switch channel correctly

2007-11-09 Thread Thiemo
Am Donnerstag 08 November 2007 schrieb Maxime Laplante:
 Hi guys,

 I'm running VDR 1.4.0 on my CaptiveWorks CW-3000HD FTA receiver.

 My current diseqc.conf is:

 # DiseqC Configuration

 # Port 0 Galaxy 11  Nimiq 1,3
 S91.0W 9 V 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
 S91.0W 9 H 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
 S91.0W 9 R 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
 S91.0W 9 L 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20

I dont see how switching the polarisation is done - as toneburst, voltage and 
diseqc commands are all the same for each polarisation.
Also a repeated command should start with E1 because E0 would be for the 
next (cascaded) switch which is most probably not what was intended...
You could also repeat the commands twice, which is the default.
A correct diseqc block with 2 repeats should look like this:

S19.2E  11700 V   9750 t v W15 [E0 10 38 F0] W15 [E1 10 38 F0] W15 [E1 10 38 
F0] W15  t
S19.2E  9 V  10600 t v W15 [E0 10 38 F1] W15 [E1 10 38 F1] W15 [E1 10 38 
F1] W15  T
S19.2E  11700 H   9750 t V W15 [E0 10 38 F2] W15 [E1 10 38 F2] W15 [E1 10 38 
F2] W15  t
S19.2E  9 H  10600 t V W15 [E0 10 38 F3] W15 [E1 10 38 F3] W15 [E1 10 38 
F3] W15  T

regards, 
T.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] VDR doesn't always switch channel correctly

2007-11-09 Thread Timothy D. Lenz
He has a Dish Pro LNB. The switching is done via the two LO settings. He
wants V high always for propper operration of the LNB. They like the voltage
to be at 18-19v

Try increasing the delay a tad. change the W15's to W20 and the first W20's
to W25's. The W20's at the end I don't think are needed.

- Original Message - 
From: Thiemo [EMAIL PROTECTED]
To: VDR Mailing List vdr@linuxtv.org
Sent: Friday, November 09, 2007 3:07 AM
Subject: Re: [vdr] VDR doesn't always switch channel correctly


 Am Donnerstag 08 November 2007 schrieb Maxime Laplante:
  Hi guys,
 
  I'm running VDR 1.4.0 on my CaptiveWorks CW-3000HD FTA receiver.
 
  My current diseqc.conf is:
 
  # DiseqC Configuration
 
  # Port 0 Galaxy 11  Nimiq 1,3
  S91.0W 9 V 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
  S91.0W 9 H 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
  S91.0W 9 R 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
  S91.0W 9 L 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20

 I dont see how switching the polarisation is done - as toneburst, voltage
and
 diseqc commands are all the same for each polarisation.
 Also a repeated command should start with E1 because E0 would be for
the
 next (cascaded) switch which is most probably not what was intended...
 You could also repeat the commands twice, which is the default.
 A correct diseqc block with 2 repeats should look like this:

 S19.2E  11700 V   9750 t v W15 [E0 10 38 F0] W15 [E1 10 38 F0] W15 [E1 10
38
 F0] W15  t
 S19.2E  9 V  10600 t v W15 [E0 10 38 F1] W15 [E1 10 38 F1] W15 [E1 10
38
 F1] W15  T
 S19.2E  11700 H   9750 t V W15 [E0 10 38 F2] W15 [E1 10 38 F2] W15 [E1 10
38
 F2] W15  t
 S19.2E  9 H  10600 t V W15 [E0 10 38 F3] W15 [E1 10 38 F3] W15 [E1 10
38
 F3] W15  T

 regards,
 T.

 ___
 vdr mailing list
 vdr@linuxtv.org
 http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] VDR doesn't always switch channel correctly

2007-11-09 Thread Reinhard Nissl
Hi,

Maxime Laplante schrieb:

 I searched the mailing list and found that there may be a patch but this
 is not for vdr 1.4.0
 check this:
 http://212.227.166.180/pipermail/vdr/2005-December/006841.html

This patch was already integrated into VDR 1.3.x with some small
modifications, so VDR 1.4.0 works like that: when optimized tuning to
a channel doesn't get a lock within 9 seconds, a non optimized tuning
operation is repeated every 9 seconds until a lock succeeds.

optimized tuning means: when you switch from one channel to another
channel on the same polarization, there is no need to send the DiSEqC
commands. Only the tuner needs to tune to a different frequency.

So non optimized tuning means, that the DiSEqC commands are sent
although there is no need to. This fixed tuning issues where the DiSEqC
message got distorted on the way to the multiswitch/LNB with the result
that VDR never successfully tuned in such a case.

Bye.
-- 
Dipl.-Inform. (FH) Reinhard Nissl
mailto:[EMAIL PROTECTED]

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


[vdr] VDR doesn't always switch channel correctly

2007-11-08 Thread Maxime Laplante
Hi guys,
 
I'm running VDR 1.4.0 on my CaptiveWorks CW-3000HD FTA receiver.
 
I have a DishPro Twin LNB to receive both Nimiq 1 (91.0W) and Nimiq 2
(82.0W)
There is also a Dish Pro DP34 switch between the receiver and lnb.
 
 
Everything is working good except that sometimes VDR doesn't tune a channel
correctly.
I just get a black screen.
 
Usually when I switch from a channel on one satellite to a channel on
another satellite.
 
I searched the mailing list and found that there may be a patch but this is
not for vdr 1.4.0
check this:
http://212.227.166.180/pipermail/vdr/2005-December/006841.html
 
 
My current diseqc.conf is:
 
# DiseqC Configuration
 
# Port 0 Galaxy 11  Nimiq 1,3
S91.0W 9 V 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 9 H 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 9 R 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 9 L 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
 
# Port 1 Nimiq 2
S82.0W 9 V 11250 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 9 H 14350 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 9 R 11250 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 9 L 14350 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
 
 
Thanks,
Maxime
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr