Re: [vdr] VDR feature request: GotoStoredPosition

2009-04-29 Thread Morfsta
On 4/27/09, marti...@embl.de marti...@embl.de wrote:
 To enable/disable GotoStoredPosition we would need a setting (on/off)
 on the Diseqc setup menu

SNIP

IMHO, VDR needs multi satellite support bundled with it (via diseqc
1.2), which could be achieved either in the core, or as a bundled
plugin. The plugin should: -

1) Set East/West limits
2) Drive the rotor east/west for tuning
3) Store sat locations at certain position numbers
4) Display signal strength etc
5) Allow scanning of DVB-S / S2 transponders and add these to VDR channel lists

Mostly this is done by the rotor plugin, but it doesn't seem to be
supported anymore. :-(

Thanks,

Morfsta

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] VDR feature request: GotoStoredPosition

2009-04-29 Thread Halim Sahin
Hi,
An easy diseqc configuration setup will be useful in core VDR (+1).

The reelbox had such a feature in the past don't know if current versions
do.

Regards
halim


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


Re: [vdr] VDR feature request: GotoStoredPosition

2009-04-26 Thread Klaus Schmidinger
On 25.04.2009 19:18, marti...@embl.de wrote:
 As you probably know the rotor plugin is rather buggy by now as it has more
 patches than code.
 It would be not be necessary if vdr  had an option ´Enable GotoPosition
 ´
 and if enabled it sent the diseqc command E0 31 6B XX which means ´First 
 rotor
 go to stored position XX´ when changing to a channel on a different sat
 position.
 
 This way it would be posible to use an external program such as xdipo (GPL)
  to
 store the orbital positions in the first place and then just configure
 diseqc.conf for vdr use.
 
 #my diseqc.conf
 
 #S19.2E is the first stored position
 S19.2E 11700 V  9750  t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t
 S19.2E  9 V 10600  t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T
 S19.2E  11700 H  9750  t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t
 S19.2E  9 H 10600  t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T
 
 #S13.0E is the second stored position
 S13.0E 11700 V  9750  t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t
 S13.0E  9 V 10600  t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T
 S13.0E  11700 H  9750  t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t
 S13.0E  9 H 10600  t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T
 
 #S5.0E is the thirst stored position
 S5.0E 11700 V  9750  t v W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 t
 S5.0E  9 V 10600  t v W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 T
 S5.0E  11700 H  9750  t V W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 t
 S5.0E  9 H 10600  t V W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 T
 
 #plugins/rotor.conf
 S19.2E = 1
 S13.0E = 2
 S5.0E = 3

What exactly would have to be changed in VDR to do this?

Klaus

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr