Did you try to use xine-ui directly instead of vdr-sxfe ?
2008/11/5 Pertti Kosunen [EMAIL PROTECTED]
JJussi wrote:
IF I set passthrough device to iec958:CARD=Intel,DEV=0, then result is:
amp don't see any signal and playback is stopped after 1 second.
Do you run vdr-sxfe with '--audio
JJussi wrote:
I tried these.. Only thing what changed, now my amp cannot decode signal
anymore, it's more like loud noise.. Digital garbage.
Search continues...
$ aplay -L -C 1 | grep iec958
iec958:CARD=Intel,DEV=0
iec958:CARD=DG2,DEV=0
$ grep iec958 .xine/config_xineliboutput
On Tuesday, 4. Novemberta 2008 11:24:37 Pertti Kosunen wrote:
$ aplay -L -C 1 | grep iec958
iec958:CARD=Intel,DEV=0
$ grep iec958 .xine/config_xineliboutput
audio.device.alsa_passthrough_device:iec958:CARD=Intel,DEV=0
Check correct output name with aplay and change it to
JJussi wrote:
Sorry.. Didn't help.. :-(
Upmix stereo to 5.1: Yes
This should be no.
What mb/sound chip?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
On Tuesday, 4. Novemberta 2008 17:13:23 Pertti Kosunen wrote:
JJussi wrote:
Sorry.. Didn't help.. :-(
Upmix stereo to 5.1: Yes
This should be no.
It is...
What mb/sound chip?
Asus P5B, Intel HDA sound chip
--
JJussi
___
vdr mailing list
Base question/problem is.. Why vdr-xineliboutput don't work with xine
settings? (as I stated at start of this thread, with xine I don't have
problems with these files... Coping config file to setup_xineliboutput don't
solve problem.)
--
JJussi
___
JJussi wrote:
Base question/problem is.. Why vdr-xineliboutput don't work with xine
settings? (as I stated at start of this thread, with xine I don't have
problems with these files... Coping config file to setup_xineliboutput don't
solve problem.)
Most likely there is something else
On Tuesday, 4. Novemberta 2008 19:04:42 Petri Helin wrote:
JJussi wrote:
Base question/problem is.. Why vdr-xineliboutput don't work with xine
settings? (as I stated at start of this thread, with xine I don't have
problems with these files... Coping config file to setup_xineliboutput
JJussi wrote:
I would.. If I could.. When I try to download file, I get 403 Forbidden
Even for this direct link?
http://www.diatonis.com/downloads/diatonis_ac3_48k_soal.zip
-Petri
___
vdr mailing list
vdr@linuxtv.org
On Tuesday, 4. Novemberta 2008 19:41:38 Petri Helin wrote:
Even for this direct link?
Even direct link.. But I managed to get that other currents file..
Result:
When I have set # at start of line what defines that passthrough device (--
so system uses default value of it), my amp says that
I assume that you use vdr-sxfe as the frontend for xineliboutput? What
does its log output look like? Please set logging to verbose and post
here (as attachments) the results. And the same with xine.
-Petri
Hi!
That's right! vdr-sxfe is my front end.
Here is log files.
--
JJussi
vdr-sxfe
JJussi wrote:
I assume that you use vdr-sxfe as the frontend for xineliboutput? What
does its log output look like? Please set logging to verbose and post
here (as attachments) the results. And the same with xine.
-Petri
Hi!
That's right! vdr-sxfe is my front end.
Here is log files.
On Monday, 3. Novemberta 2008 20:52:15 Petri Helin wrote:
audio.driver:alsa
audio.device.alsa_default_device:hw:0,1
audio.device.alsa_front_device:hw:0,1
audio.device.alsa_passthrough_device:plug:spdif:0
audio.device.alsa_surround40_device:plug:spdif:0
13 matches
Mail list logo