Hi,
Dieter Bloms wrote:
t: 1171143387,098, c: 1, r: 0, a:
--
t: 1171143387,099, c: 1, r: 0, a: ioctl(fd_frontend, FE_SET_TONE,
SEC_TONE_OFF)
t: 1171143387,100, c: 1, r: 0, a: ioctl(fd_frontend, FE_SET_VOLTAGE,
SEC_VOLTAGE_13)
t:
Hi Reinhard,
On Sun, Feb 11, Reinhard Nissl wrote:
I'd like you to do some further tests by modifying diseqc.conf:
I will do each setup for about 1 week and will see, if I miss some
recordings and let you about the results.
A) let's remove FE_DISEQC_SEND_MASTER_CMD and FE_DISEQC_SEND_BURST
Hi,
Dieter Bloms wrote:
Feb 9 12:02:00 video vdr: [30529] switching device 2 to channel 1
Feb 9 12:02:09 video vdr: [30537] frontend 1 timed out while tuning to
channel 1, tp 111836
Feb 9 12:02:32 video vdr: [30603] ERROR: video data stream broken
so why can I get ts streams from the
Hi,
Dieter Bloms wrote:
Feb 9 12:02:00 video vdr: [30529] switching device 2 to channel 1
Feb 9 12:02:09 video vdr: [30537] frontend 1 timed out while tuning to
channel 1, tp 111836
Feb 9 12:02:32 video vdr: [30603] ERROR: video data stream broken
so why can I get ts streams from the
Hi,
On Sat, Feb 10, Reinhard Nissl wrote:
szap always sends DiSEqC commands, so I'd suggest to use VDR's
diseqc.conf. It's default section Full DiSEqC sequence is identical to
the tuning sequence that szap uses.
You may want to try the attached szap and VDR patch. You'll then get
some
Hi,
Dieter Bloms wrote:
szap always sends DiSEqC commands, so I'd suggest to use VDR's
diseqc.conf. It's default section Full DiSEqC sequence is identical to
the tuning sequence that szap uses.
You may want to try the attached szap and VDR patch. You'll then get
some output while tuning.
Hi,
On Sat, Feb 10, Reinhard Nissl wrote:
Don't know. But have you tried DiSEqC with VDR (menu Settings - LNB)?
no, because I didn't install any diseqc switches.
I had also an empty diseqc.conf
You might get similar messages but on the other hand, it might work ;-)
ok, now I have installed
Hi,
with strace I can see, that vdr tries to open video0 and audio0, which
aren't there.
Do they have to exist for nova cards ?
video:/var/service/vdr # grep adapter1 /tmp/vdr-1.5.0.strace
access(/dev/dvb/adapter1/frontend0, F_OK) = 0
open(/dev/dvb/adapter1/frontend0, O_RDONLY) = 10
