Re: [vdr] WSS signaling with DXR3 cards
Kartsa kirjoitti: Jukka Tastula kirjoitti: On Friday 10 August 2007 10:14:32 Ville Skyttä wrote: Hm, so you have an ADV7175 based one currently? Sorry, I don't think that helps - again, as far as I know, the WSS stuff only works with ADV7170 based cards. The patched adv717x driver never even tries to set the WSS mode for any other DXR3/H+'s. I don't have any others than a couple of ADV7170 based cards so I can't test with anything else. It could be useful to ask on dxr3-devel or dxr3-plugin lists if someone can help out more. I have both and I can confirm that the ADV7175 does not support WSS. If you're really bored feel free to compare the datasheets http://pdf1.alldatasheet.com/datasheet-pdf/view/48906/AD/ADV7175.html http://www.ortodoxism.ro/datasheets/analogdevices/168564552ADV7170_1_a.pdf ADV7170 has WSS support clearly stated where as ADV7175 makes no mention of it at all. I managed to find a ADV7170 card and now WSS works. Thanks to who partissipated. \\Kartsa ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] WSS signaling with DXR3 cards
Ville Skyttä kirjoitti: On Sunday 05 August 2007, Kartsa wrote: At first I had problems with getting DXR card to work with fedora core 7 but now everything is otherwise fine but wss signaling does not seem to work. Do I need to patch the kernel or em8300 or something to make it work? Or do I still have to compile the CVS version of dxr3? Any pointers would be preciated. The WSS patches are included in the em8300 modules shipped in Fedora, and version 0.2.7 of the DXR3 plugin contains the WSS patch also upstream, no patchwork needed. Note that (AFAIK) you need an ADV7170 based DXR3/H+ for this WSS stuff to work, and it needs to be enabled in the DXR3 plugin's setup through VDR's OSD. Thanks for the prompt responce. Did not have chance to check the card before now. It was not an ADV7170 based soI changed it to ADV7175. No luck though. Still no wss and tv must be changed by hand usint tv's remote. And I know the tv supports it because when using FF cards output it worked fine. Any other hints? What should the parameters for adv717x module be? \\Kartsa ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] WSS signaling with DXR3 cards
On Friday 10 August 2007, Kartsa wrote: Ville Skyttä kirjoitti: On Sunday 05 August 2007, Kartsa wrote: At first I had problems with getting DXR card to work with fedora core 7 but now everything is otherwise fine but wss signaling does not seem to work. Do I need to patch the kernel or em8300 or something to make it work? Or do I still have to compile the CVS version of dxr3? Any pointers would be preciated. The WSS patches are included in the em8300 modules shipped in Fedora, and version 0.2.7 of the DXR3 plugin contains the WSS patch also upstream, no patchwork needed. Note that (AFAIK) you need an ADV7170 based DXR3/H+ for this WSS stuff to work, and it needs to be enabled in the DXR3 plugin's setup through VDR's OSD. Thanks for the prompt responce. Did not have chance to check the card before now. It was not an ADV7170 based soI changed it to ADV7175. No luck though. Hm, so you have an ADV7175 based one currently? Sorry, I don't think that helps - again, as far as I know, the WSS stuff only works with ADV7170 based cards. The patched adv717x driver never even tries to set the WSS mode for any other DXR3/H+'s. I don't have any others than a couple of ADV7170 based cards so I can't test with anything else. It could be useful to ask on dxr3-devel or dxr3-plugin lists if someone can help out more. Any other hints? What should the parameters for adv717x module be? There are no module parameters that affect WSS. Programs using the driver set the desired WSS mode themselves. The patched em8300setup program can be used for this too if you want to try out something. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] WSS signaling with DXR3 cards
On Friday 10 August 2007 10:14:32 Ville Skyttä wrote: Hm, so you have an ADV7175 based one currently? Sorry, I don't think that helps - again, as far as I know, the WSS stuff only works with ADV7170 based cards. The patched adv717x driver never even tries to set the WSS mode for any other DXR3/H+'s. I don't have any others than a couple of ADV7170 based cards so I can't test with anything else. It could be useful to ask on dxr3-devel or dxr3-plugin lists if someone can help out more. I have both and I can confirm that the ADV7175 does not support WSS. If you're really bored feel free to compare the datasheets http://pdf1.alldatasheet.com/datasheet-pdf/view/48906/AD/ADV7175.html http://www.ortodoxism.ro/datasheets/analogdevices/168564552ADV7170_1_a.pdf ADV7170 has WSS support clearly stated where as ADV7175 makes no mention of it at all. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] WSS signaling with DXR3 cards
On Sunday 05 August 2007, Kartsa wrote: At first I had problems with getting DXR card to work with fedora core 7 but now everything is otherwise fine but wss signaling does not seem to work. Do I need to patch the kernel or em8300 or something to make it work? Or do I still have to compile the CVS version of dxr3? Any pointers would be preciated. The WSS patches are included in the em8300 modules shipped in Fedora, and version 0.2.7 of the DXR3 plugin contains the WSS patch also upstream, no patchwork needed. Note that (AFAIK) you need an ADV7170 based DXR3/H+ for this WSS stuff to work, and it needs to be enabled in the DXR3 plugin's setup through VDR's OSD. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
