Re: [vdr] Why won't my new TT-1401 DVB-S work :(

2010-10-11 Thread Simon Baxter 

Can anyone help me on my problem?

I've found I can get a picture with mplayer /dev/dvb/adapter0/dvr0 when I 
szap, BUT only if I add the -r switch


szap -r -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf Maori TV

1) If I miss out the -r switch I can't get a picture from dvr0.
2) If I add the -r switch, mplayer detects the TS format and plays the 
live TV perfectly.

3) If I miss out the -l 11300 I can't get the front end to lock

I still can't get the front end to lock in VDR either - so no recording and 
no live TV.


I've tried all sorts of LNB config in setup.conf - latest being:
Use DiSEqC:no
SLOF (MHz):11700
Low LNB frequency (MHz):   9750
High LNB frequency (MHz):  10600

But I can't get it to work.


Any ideas?



But I'm still getting:

Oct  8 07:34:21 callin vdr: [1677] saved setup to 
/etc/vdr/vdr-1.7.15/setup.conf

Oct  8 07:34:27 callin vdr: [1677] switching to channel 1
Oct  8 07:34:30 callin vdr: [1681] frontend 0/0 timed out while tuning to 
channel 1, tp 112483
Oct  8 07:35:35 callin vdr: [1681] frontend 0/0 timed out while tuning to 
channel 1, tp 112483



And I can still szap:
./szap -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf Maori TV
reading channels from file '/etc/vdr/vdr-1.7.15/channels.conf'
zapping to 1 'Maori TV':
sat 0, frequency = 12483 MHz H, symbolrate 2250, vpid = 0x0202, apid = 
0x028c sid = 0x

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 03 | signal c94f | snr 95c4 | ber ff17 | unc fffe |
status 1f | signal ca5e | snr 9537 | ber 0600 | unc fffe | 
FE_HAS_LOCK
status 1f | signal ca76 | snr 95d6 | ber 0700 | unc fffe | 
FE_HAS_LOCK
status 1f | signal c940 | snr 95a9 | ber 0600 | unc fffe | 
FE_HAS_LOCK
status 1f | signal ca7e | snr 9558 | ber 0600 | unc fffe | 
FE_HAS_LOCK





___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] Why won't my new TT-1401 DVB-S work [RESOLVED]

2010-10-11 Thread Simon Baxter 



Can anyone help me on my problem?

I've found I can get a picture with mplayer /dev/dvb/adapter0/dvr0 when 
I szap, BUT only if I add the -r switch


szap -r -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf Maori TV

1) If I miss out the -r switch I can't get a picture from dvr0.
2) If I add the -r switch, mplayer detects the TS format and plays the 
live TV perfectly.

3) If I miss out the -l 11300 I can't get the front end to lock

I still can't get the front end to lock in VDR either - so no recording 
and no live TV.


I've tried all sorts of LNB config in setup.conf - latest being:
Use DiSEqC:no
SLOF (MHz):11700
Low LNB frequency (MHz):   9750
High LNB frequency (MHz):  10600

But I can't get it to work.


Any ideas?


Had to use a diseqc.conf entry, even though I'm not actually using diseqc!

S160E 9 H 11300 t V

All good now 



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr