[Veritas-bu] bpbkar creates file system map very slowly

Hello colleagues,when we perform flashbackup 1TB file system with large (up to 32GB) files, bpbkar creates file system map for 2 hours.We are using nbu_snap based snapshot. File system type is ufs. Is it normal delay orit can be tuned? Whether converting to vxfs can help us to increase

Re: [Veritas-bu] NBU upgrade 3.4 - 6.0 - sanity check

Hi, The path is correct, but I suggest you to stay in 5.1 for a few months. 5.1 is more stable than 6.0. Wait at least until MP5. Before you do the final step (5.1 – 6.0) ask from Veritas support to check the consistency of netbackup catalog You must run the command to convert the images to

Re: [Veritas-bu] Command for Catalog Backup Size

The easiest way is to find the size of /usr/openv/netbackup/db. This dir is the 99.5% of the catalog size ---Original Message--- From: praveen sundriyal [EMAIL PROTECTED] Subject: [Veritas-bu] Command for Catalog Backup Size Sent: 04 Aug '06 05:59 Hi , I am using

Re: [Veritas-bu] Master Server Hostname Change

Title: RE: [Veritas-bu] Master Server Hostname Change All you wont believe it but I'm still investigating the master server hostname change and need some advice as to where else something could go wrong.Now i know this is possible and everyone mentions that Symantec PS should be pulled in

Re: [Veritas-bu] (Sorry) 84 Errors

I get 84 errors on DSSU when the disk is full (can't get staged off). Check to make sure that your disk is not filling up during the backup. It may have space when you look at it, but see if it had space at the time the backup ran. Bobby Williams 2205 Peterson Drive Chattanooga, Tennessee

Re: [Veritas-bu] Pausing scheduling under NetBackup 6

Just disable the service before you reboot. Then NB won't start until after you do the maintenance. Bobby Williams 2205 Peterson Drive Chattanooga, Tennessee 37421 423-296-8200 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nardello, John Sent:

Re: [Veritas-bu] Master Server Hostname Change

Hi, I’ve done this many times. You are correct. You must run the bpimage command before you move the database. Then you can move the image dir to the new server. Also you must move the files: mediadb, voldb, pooldb, ruledb. The vmglob is not needed. Check the vm.conf and bp.conf. Move the

Re: [Veritas-bu] Pausing scheduling under NetBackup 6

Or use the old good method to edit the bihavior file . change the TRIES_PER_PERIOD to 0 smpt ---Original Message--- From: Bobby Williams [EMAIL PROTECTED] Subject: Re: [Veritas-bu] Pausing scheduling under NetBackup 6 Sent: 04 Aug '06 11:29 Just disable the service before

Re: [Veritas-bu] Master Server Hostname Change

That's great info , much appreciated Quick Q ,how did you over come the tapes being overwritten in the new system, or as you have moved all db's the new system recognises the media as if it where its own? Cheers Dave -Original Message- From: smpt [mailto:[EMAIL PROTECTED] Sent: 04

Re: [Veritas-bu] Master Server Hostname Change

If you have the services down during the copy and move the voldb, pooldb from the master and mediadb from all media servers (and the master) there is no problem with the tapes. It will be good to logically move the tapes out of the robot before move the voldb smpt -Original Message-

Re: [Veritas-bu] Master Server Hostname Change

Thanks From tests this morning I have seemed to get it all working , one last question , if I issue tpconfig -d on all media servers and the volume database entry all point to one server does this mean that there is only one volBD I need to worry about or does this in fact point to the

Re: [Veritas-bu] Master Server Hostname Change

Hi Yusuf Obviously in my case I'm trying to move only 1 master server however I do seem to recall a document i have read which might help you, i will try a dig it out and then forward. Dave From: Yusuf GEDIKOGLU [mailto:[EMAIL PROTECTED] Sent: 04 August 2006 12:34To: Stefanos

Re: [Veritas-bu] HELP - Need to find fast way to provide a list of ALLfiles that were backed up for a client

Title: Message use bplist instead - bplist -B -C clientname -l -R -b -t 13 -nt_files '/C/' it takes -s starttime and -e endtime Best regards Christian Sonder Fra: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] På vegne af WEAVER, SimonSendt: 4. august 2006 13:52Til:

[Veritas-bu] HELP - Need to find fast way to provide a list of ALL files that were backed up for a client

Title: Message NBU 5.1 MP2 Client: Win2k NBU 5.1 MP2 I need to veyr quickly find a fast way to LIST all files backed up on the full done 29th July 06 I can see the files in the BA and R utility - but can I export or get a list?? Thanks Regards Simon Weaver3rd Line Technical

Re: [Veritas-bu] HELP - Need to find fast way to provide a list of ALL files that were backed up for a client

Simon, Use this command: bplist There is a special syntax, will see if I can find for you. Justin. On Fri, 4 Aug 2006, WEAVER, Simon wrote: NBU 5.1 MP2 Client: Win2k NBU 5.1 MP2 I need to veyr quickly find a fast way to LIST all files backed up on the full done 29th July 06 I can see

Re: [Veritas-bu] HBA-FC adapters for IBM3584 LTO-3

Hi JNI are NO LONGER SUPPORTED by SunEmulex Qlogic okRegards Jim On 8/1/06, MacKinnon, G. R. (Gregory) [EMAIL PROTECTED] wrote:Evsyukov, Sergey wrote: Hi Len, We could not create the /dev/rmt devices neither with cfgadm nor with devfsadm utility and have been compelled to use JNI adapters to

[Veritas-bu] exclude list for clients in a specific policy

Hi, How do I use the Exclude_List to exclude certain files/directories for a bunch of windows clients in a certain policy?-- DLew97 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

Re: [Veritas-bu] Command for Catalog Backup Size

Another method is to use the bpsyncinfo commad which will give you information about the paths being backed up by your catalog backup. You can then use that to do du -sk on those paths -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of smpt Sent:

Re: [Veritas-bu] HELP - Need to find fast way to provide a list of ALLfiles that were backed up for a client

Hi, You can use "bplist -B -C"Client Name" -R -s"Start Date""Start Time"-e "End Date""End Time" (*praveen*) From: "WEAVER, Simon" [EMAIL PROTECTED]To: "'veritas-bu@mailman.eng.auburn.edu'" veritas-bu@mailman.eng.auburn.eduSubject: [Veritas-bu] HELP - Need to find fast way to provide a list of

Re: [Veritas-bu] Backup jobs get queued...

Hi, I have tried this also but it didnt worked at all .After using #ipcrm -q "que id" the que disappers from the list but no jobs get active and then we have to reboot the server again we wait for the CBYTES to reduce to 0. (*praveen *) From: "Lee, Kenneth (SBS US)" [EMAIL PROTECTED]To:

Re: [Veritas-bu] Backup jobs get queued...

I am assuming that when you said you restart the services, you mean that you do a netbackup stop and a netbackup start. If that is correct, when you stop netbackup and do an ipcs qa, do you still see the message queue? If you do, you should use ipcrm to remove the message queue before

[Veritas-bu] image imports

Guys: I am in the midst of trying to import images on a remote disk unit (Data Domains). We have a separate NBU 6 server at the BCP site. The data was backed up in our production environment. We used the bundled replication software (within the arrays) to replicate the data to the BCP

[Veritas-bu] RES: image imports

Are the datas thar are being replicated of the NetBackup catalog? If yes you don't need to import the images T+ Carlos Alberto Lima dos Santos Eng. Computação – Jundiaí SP-BR * [EMAIL PROTECTED] H https://www.linkedin.com/in/carlostoca icq 123987362 - skype carlostoca msn only [EMAIL

[Veritas-bu] RES: Backup jobs get queued...

I already had a similar problem with Solaris, there I had to change the kernel parameters that control the messages queues, in the True 64 I don't know if this is possible. T+ Carlos Alberto Lima dos Santos Eng. Computação – Jundiaí SP-BR * [EMAIL PROTECTED] H

Re: [Veritas-bu] Master Server Hostname Change

Hi, I'm not sure about the command, but you can go to the windows GUI (or java) and see the properties of all libraries The default installation has one server for the voldb. I don't see why someone will change it. ---Original Message--- From: Clooney, David [EMAIL PROTECTED]

Re: [Veritas-bu] Master Server Hostname Change

I never done that but and you have to test it first. Move the image directory to the new master server. Keep a copy of mediadb. This file must be in the same place after the changes Do the changes and run an inventory. All tapes of the remote sites will be new tapes for the new master. Then

[Veritas-bu] RES: Master Server Hostname Change

I think that vmglob -listall -java command, shows that you wants. T+ Carlos Alberto Lima dos Santos Eng. Computação – Jundiaí SP-BR * [EMAIL PROTECTED] H https://www.linkedin.com/in/carlostoca icq 123987362 - skype carlostoca msn only [EMAIL PROTECTED] -Mensagem original-

Re: [Veritas-bu] image imports

I am in the midst of trying to import images on a remote disk unit (Data Domains). We have a separate NBU 6 server at the BCP site. The data was backed up in our production environment. We used the bundled replication software (within the arrays) to replicate the data to the BCP site.