on that subject will this show only true failures, i.e. jobs that did
not run successfully on a retry?
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Mark
Glazerman
Sent: Tuesday, June 23, 2009
thanks for the reply
From: Donaldson, Mark [mailto:mark.donald...@staples.com]
Sent: Tuesday, June 23, 2009 2:08 PM
To: Fernandes, Eustace; Mark Glazerman; veritas-bu
Subject: RE: [Veritas-bu] modify backup_exit_notify.sh script
The emails on NB are per-image
Netbackup master 6.0 Mp5
Client getting error 41 on backup Linux redhad release 4 update 7, the
client is in the DMZ
This is what I get when I do a test for
bptestbpcd -client calsmtp1 -debug
15:26:46.154 [27093] 2 vnet_async_connect: vnet_vnetd.c.4163:
getsockopt SO_ERROR returned:
Netbackup 6.0 MP5
I heard there was a potential problem with consistency check whilst
running nbsupport script ... I wondered if there was a flag not to
Check the catalog OR if there is no problem with running this with
Netbackup 6.0 MP5 Solaris ?
Eustace Fernandes
Technical Support
Netbackup 6.0 MP5
How do you install client files over to the secure clients (is without
disabling ftp / enabling ftp using svcadm)?
I.e. install_client_files script but using scp
Eustace Fernandes
Technical Support
mailto:[EMAIL PROTECTED]
voice (403) 237-1534
thanks 6.0 does not have an ssh script
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2008 3:43 PM
To: Fernandes, Eustace; VERITAS-BU@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Installing client files securely
Short answer
Tape Library ACS SL8500
Procedure
1. Produce eject list and eject using vmchange (done this and works
fine)
2. Physically remove media from the cap
3. produce report that matches the actual media removed from the cap
(currently there may be a discrepancy between the eject list and what
was
Thanks, thats what I wanted to confirm ...
Eustace
From: Ueli Schweizer [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 09, 2007 3:37 PM
To: Fernandes, Eustace; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] NBU 6.0 Retention change
Hi Eustace
Netbackup 6.0
Does anyone have eject scripts for netbackup 6.0 for SL8500... to ACS?
Eustace Fernandes
Technical Support
mailto:[EMAIL PROTECTED]
voice (403) 237-1534
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
Solaris 9 Netbackup 6.0 MP2, does anyone know if the online HOT backups,
FULL and INCR contain a copy of the /usr/openv/db/data files, I cannot
see them with bprecover -l
-tpath .etc ...
Eustace Fernandes
Technical Support
mailto:[EMAIL PROTECTED]
voice (403) 237-1534
Target master server name is the same as the restore server name
Solaris 9
This is what I get using the GUI to recover from a HOT backup
Images seem to have recovered successfully and then
Starts to restore the database and I get ...
6:09:59 (36.001) INF - Beginning restore from
: Wednesday, February 28, 2007 7:05 AM
To: Fernandes, Eustace; Veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] tpautoconf
Are these FC connected drives?
what does:
prompt# cfgadm -al -o show_FCP_dev
show you?
--
-Original Message-
From: [EMAIL PROTECTED
Sgscan tape is missing a device ... mt -f /dev/rmt/0cbn does show that
the OS can see the device ... this is a case where I replaced a drive
and
I ran tpautoconf -report_disc ... output shows 1 Missing Device but no
corresponding new device so that I can run the replace drive name
drive path
During a HOT catalog recovery I am getting the following error
02/07/2007 16:11:59 - started process bptm (pid=382)
02/07/2007 16:12:00 - Critical bptm (pid=382) unable to make directory
for media filenames, Not a directory cannot make required directory (35)
Any ideas.
Eustace Fernandes
Netbackup 6.0
Tpautoconf -t .. getting Failed opening the device mappings file, so
I installed the mapping patch Mappings_6_286713.tar, then executed
Tpext .. got message ... EMM interface initialization failed,
status = 77
Also unable to use the GUI auto discovery to add drives
I am at 6.0 and after upgrading to MP2 I am unable to add a new volume
pool or media
-Original Message-
From: WEAVER, Simon [mailto:[EMAIL PROTECTED]
Sent: Friday, May 19, 2006 12:23 AM
To: Fernandes, Eustace; Justin Piszcz
Cc: List Veritas List
Subject: RE: [Veritas-bu] EMM Database
-Original Message-
From: WEAVER, Simon [mailto:[EMAIL PROTECTED]
Sent: Friday, May 19, 2006 12:23 AM
To: Fernandes, Eustace; Justin Piszcz
Cc: List Veritas List
Subject: RE: [Veritas-bu] EMM Database error 196
Eustace
The command was NBPUSHDATA.
You never actually said what version
Title: EMM Database error 196
After upgrading to MP2 I am unable to vmadd or vmpool add any ideas ?
Eustace Fernandes
Technical Support
mailto:[EMAIL PROTECTED]
voice (403) 237-1534
PROTECTED]
Sent: Thursday, May 18, 2006 3:37 PM
To: Fernandes, Eustace
Cc: List Veritas List
Subject: Re: [Veritas-bu] EMM Database error 196
Did you run the nbdata (dont have docs in front of me) -push command to
populate the database?
On 5/18/06, Fernandes, Eustace [EMAIL PROTECTED] wrote
Thanks does not sound like a good idea to run nbpushdata, will just have
to wait for Veritas to call
-Original Message-
From: Justin Piszcz [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 18, 2006 4:10 PM
To: Fernandes, Eustace; List Veritas List
Subject: Fwd: [Veritas-bu] Add Volume Pool
Java worked fine before I upgraded to MP2
-Original Message-
From: Dmitri Smirnov [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 18, 2006 4:30 PM
To: Justin Piszcz; Fernandes, Eustace; List Veritas List
Subject: RE: [Veritas-bu] Add Volume Pool - EMM 196 w/ NBU 6.0MP2
Some stupid ideas
Title: Space requirement for 6.0 MP2 anyone limited 1.5 GB available on /opt/openv
Eustace Fernandes
Technical Support
mailto:[EMAIL PROTECTED]
voice (403) 237-1534
Title: Available _media script
Does anyone know what the FULL tape report is based on
Eustace Fernandes
Technical Support
mailto:[EMAIL PROTECTED]
voice (403) 237-1534
Title: Message
question you change type in the volDB to match the
available SU?, i.e.
if you want to do restore from a tape that is marked as
type DLT2 and the UNIT did not exist, can you
change the volDB info to reflect its now a DLT3 to match
the currently available SU with type DLT3?
24 matches
Mail list logo