can we avoide ?
Your help is very much appreciated.
THX
--
Joe Royer / Sr. SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
encryption. Has anyone upgraded to LTO gen 4 yet who is also using the
on-drive encryption and if so what kind of throughput do you see on
average. Any real-world, real-life information will be greatly
appreciated.
--
Joe Royer / Sr. SysAdmin / Digital Motorworks / 512-692-1028
This message
-Original Message-
From: Rosenkoetter, Gabriel [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 06, 2007 10:56 AM
To: Joe Royer; veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] disable tld
Do something that always takes the robot offline, like opening the front
door
Is there a way to manually down tld0, thus forcing the library drives to AVR?
I tried upoprbyname and that still put the drives in TLD.
Today is not a good day. The robot is dead, and the vendor is having
logistics issues which means I have been waiting on a replacement part for 9
hours now.
To answer my own question: kill tldd
On Mon, 5 Nov 2007, Joe Royer wrote:
Is there a way to manually down tld0, thus forcing the library drives to
AVR? I tried upoprbyname and that still put the drives in TLD.
Today is not a good day. The robot is dead, and the vendor is having
this was complete, I had acceptible
speeds again (above the minimum 10MB/s for my HP LTO2 drives).
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged
] On Behalf Of Joe
Royer
Sent: 10 July 2007 15:49
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Catalog performence to tape
I have gone a few rounds with this issue myself, and here is what I
learned:
- Catalog disk needs read performance, not write.
- RAID-5 is faster than
to disable reserve / release if doing dynamic
drive sharing in ARCServe and CommVault, I'm wondering if NBU would be
similar?
EMC and the robot vendor both say to turn SCSI reserve / release off,
Veritas says to leave it on; anyone out there with any experience with
these issues?
thanks.
--
Joe
and
one for /opt/openv/.
The V240 has MORE than ample PCI IO for that amount of data, but if the
T2000 is cheaper, I'd go that way.
If/when you eventually need more performance for the catalog, you can
put it on FC-SAN disk, or an external FC array.
Paul
--
Joe Royer / SysAdmin / Digital
a problem fixed in NB 5.1MP6 The work around it to creating
touch file:
/usr/openv/netbackup/NOSHMDUP
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joe
Royer
Sent: Thursday, May 03, 2007 9:17 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject
with 2 x LTO-3 drives (SCSI)
A staging platform (a NAS device possibly, Quantum Snap server or along
those lines, something compatible with NetBackup before spooling off to
tape)
Any recommendations on the above or your what you currently run in-house
would be great.
Many thanks,
Dale
--
Joe
(54).
01:01:36 INF - Duplicate of backup id netapp01_1177753767 failed, timed
out connecting to client (54).
TIA
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information
.
.../Ed
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
of the message is not the intended recipient
's
for medias...They are all optimized for IO and multiple
threads/processes. Quad GigE onboard, 32GB RAM max...
Austin
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information
\, it
is not a multiple of 512
How do I get it to use the NDMP drives to duplicate?
TIA
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
a NDMP storage unit, the Linux media server isn't even
available.
So, it seems that I'm missing something. Suggestions while I go off and
dig through the Nix Admin Guide?
Thanks,
Jason
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended
, using linux top command, we see a plenty of free memory (5 or
6GB),no matter how many jobs are running.
btpm complains also that it?s waiting for empty buffers.
Am I doing something wrong?
TIA
-- next part --
--
Joe Royer / SysAdmin / Digital Motorworks / 512
is L100 and I am using two drives for backup. By increasing
number of drives or number of channels the backup speed is not going to
be better.
The tunning I have made so far is.
NET_BUFFER_SZ as 262144
NUMBER_DATA_BUFFERS=64
SIZE_DATA_BUFFERS=1048576
--
Joe Royer / SysAdmin / Digital Motorworks
LTO3 show
shining?
How can I tell if my drives are show shining? Where do I look, what
commands do I need to run etc.?
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information
was thinking of maybe using a cron job to
de-activate the specific policies at 8AM and another cron job to
reactivate at 6PM. Is there a simpler way?
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
Edge 2950 w/
4GB RAM. I originally spec'd two processors (two dual cores) which I'm
certain will be quite powerful enough to drive 4 Gigabit nics to disk
over fiber. But how important is it, and can 1 do the job? Anyone
running anything similar?
-Jonathan
--
Joe Royer / SysAdmin
hit 27MB/s
reliably doing OS backups, but my DSSU is on SATA SAN drives and hard
to measure.
Thanks!
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged
in one
robot with robot control on the (linux) master. Will any of this
require an SSO license?
I'm reading the manuals, but I'm hoping you guys will be faster.
Thanks!
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use
from scratch, and of course
now it's urgent.
Thanks!
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
of the message
to backup.
Paul
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
of the message is not the intended recipient
Looks like Remote NDMP is not supported on Linux. I just looked at the
compatibility matrix and all the linux NDMP patches, nowhere does it say
support was added for linux server. Someone please correct me if I'm
wrong.
On Tue, 12 Sep 2006, Joe Royer wrote:
Actually I was hoping to use 3
Blok Kat:4-5
34805 Kavacik / ?stanbul
[EMAIL PROTECTED]
--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
of the message
filesets or =
=3D
shadow copies). We've power-cycled the master and media servers a =
=3D
couple of times, and that isn't fixing the issue. =3D20
If anyone could shed some light on this for us, I'd greatly =3D
appreciate it.
=20
Best Regards
Harun Jonatan
--
Joe
28 matches
Mail list logo
