...@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] ACS status = 29
I'm seeing the same issue at one site and I'm curious if your drive had a stuck
tape, or for some other reason couldn't move the tape from the drive to the
home cell?
The problem I see is the tape gets stuck in the drive, can
I'm seeing the same issue at one site and I'm curious if your drive had a
stuck tape, or for some other reason couldn't move the tape from the drive
to the home cell?
The problem I see is the tape gets stuck in the drive, cannot be unloaded,
which causes NBU to constantly request another mount
- properties - timeouts .
regards,
Nick
- original message -
Subject:Re: [Veritas-bu] ACS status = 29
From: "Marianne Van Den Berg"
Date: 11/13/2009 6:39 PM
You need to determine if it's one or all media servers having a problem
with dismounts.
The most common
You need to determine if it's one or all media servers having a problem
with dismounts.
The most common cause of unload failures is device mapping mismatch
(when ACS address e.g. 0,0,10,0 does not map to the correct
/dev/rmt/xcbn device name).
If logging is increased on ACSLS side, you will be abl