Sandy
Have you tried using a different tape to backup the DB? How large is it?
Is there any logging enabled to see at what point the backup of the DB
Fails?
Also, is it stored on a disk with sufficient space?
What is the retention periods? You could use bpexpdate to force them out of
Netbackup,
Title: Message
I did
believe (when I used to backup Exchange) that one license coverd all the
exchange servers.
With
Symantec now holding the NBU License rules, it could well
change
Hope
this helps
Simon
WeaverTechnical SupportWindows Domain Administrator
EADS
AstriumTel:
Hello Andrew
Here is what I have from an earlier mail (for extract just change t to x)
I have had succes with listing the files on a tape with Netbackup tar when I
know the blocksize.
For nonmultipexed tape, blocksize 256k:
/usr/openv/netbackup/tar -itvf norewind device -b 512
For multipexed
Title: Message
Hm
what about Firmware for the SDLT tape drives?
Any
loose cables / connections or possible to change Scsi
connectors?
Not
too sure why they feel the software is polling a drive could cause a
problem?- if anything I would say polling a device is probably good as
Title: Message
They have upgraded the FW to the latest/greatest and
checked cables. I agree on the polling.
From: WEAVER, Simon
[mailto:[EMAIL PROTECTED] Sent: Wednesday, January 04,
2006 08:21To: Barber, Layne (Contractor);
veritas-bu@mailman.eng.auburn.eduSubject: RE: [Veritas-bu] DLT
Title: Message
I
assume its been physically powered down / restarted the drives /
robot?
Also,
do the tapes go into a DOWN STATE during the middle of a backup, or beginning or
would you say very random?
Simon
WeaverTechnical SupportWindows Domain Administrator
EADS
AstriumTel:
Title: Message
ACtually just one more thing I noticed - you said they checked cables -
what about REPLACE? Reason I say this, is due to the amount of time its been
working (June to Oct) and we are now in Jan, so I think its safe to say it
sounds like H/W
Simon
WeaverTechnical SupportWindows
Title: Message
Everything has been power cycled several times. The drives
appear to go down at the end of a job.
From: WEAVER, Simon
[mailto:[EMAIL PROTECTED] Sent: Wednesday, January 04,
2006 08:47To: Barber, Layne (Contractor);
veritas-bu@mailman.eng.auburn.eduSubject: RE: [Veritas-bu]
Check that the /dev/rmt/* entries match the devices in the robot. You can
see if they do by inserting a tape into the drive and then issuing a
mt -f /dev/rmt/* status for the /dev/rmt/ number you have the drive
configured
to. It should show a device is present, if not then you have a
Title: Message
Just
curiousthose of you who admin your own zones/FC
switches.
How do you zone your
drives/servers?
for each HBA port,
do you create a zone for the HBA port and all drives visable to
it?
ie. one HBA
and 3 drives = 1 zone?
ZONE_A =
Server1_HBA0 DRIVE0 DRIVE1
Hi,
I have a SAN with two DSSU's on the
same partition(probably not the best thing).I need to free up some space
on my DSSU's because I'm running out of space.
Should i be using rm on the files i
want to delete?
Thanks
Karl
Title: Message
Definitely NOT.
Use
the GUI and expire the PRIMARY IMAGE of backups that have been moved off to tape
already.
~Kate
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]Sent: Wednesday, January 04,
Title: Message
I agree with kate :-)
Shekhar
Dhotre
ICTStorage
Engineering.
v 404.846.7483
| f 404.848.1077
[EMAIL PROTECTED]48
Perimeter Center East | Atlanta, GA
30346
Remember the difference between a boss and a leader; a boss
says "Go!" - a leader says "Let's
Steven Cashman [EMAIL PROTECTED]
wrote on 01/04/2006 10:21:35 AM:
Also be aware of how DSSUs operate. They will keep images that have
been moved onto tape available on the disk until the disk starts
getting full. Then as NBU needs more space it will start removeing
older images. DSSU
Title: RE: [Veritas-bu] DLT drives going down
Try
running "sgscan tapes" to see if you could see all your tape drives. If
you dont see all your tape drives, you need to fix that problem first, then
remap the drives.
From: Xu, Ying [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 04,
After running getting them back, put an "ENABLE_AUTO_PATH_CORRECTION" entry in the vm.conf file. "Xu, Ying" [EMAIL PROTECTED] 1/4/2006 10:08:39 am
Try running "sgscan tapes" to see if you could see all your tape drives. If you dont see all your tape drives, you need to fix that problem first,
Title: Raw Partition Restore
I just
rebuilt a server, new OS (WIN2003) and new hardware, but same network location,
server name etc etc...
When I go
into archive and restore I can seethe oldserver's past backups but
for some reason the media server cannot connect to this machine. I've
This makes it much easier if you ever have to swap an HBA (and we have
had one fail on our master/media server) - I only have to update 1
zone.
If you configure port based zoning ,then you even don't have to make
zone changes -just swap the failed HBAs or drives .
Shekhar Dhotre
ICT Storage
Title: UNIX RAW PARTITION RESTORE QUESTION
All..
My original e-mail got stepped on by someone replying with another question in it, so I changed my subject and will ask my question again, here goes..
Our environment is HP-UX 11.11, Netbackup 5.1 MP3 backing up mostly HP unix with some
Title: Message
Yes, I am mounting it to the SIME server.
Yes, I can see the database files. Yes, I even tried copying these files to a
different directory. That is what I dont understand. I have no exclude
list yet when a backup runs for that directory, only the directories are backed
up,
Hello! I get this output whenever I do vmphyinv:
vmphyinv -rn 0 -slot_range 1 7 -d hcart -non_interactive
Waiting for mount of media from TLD(0), slot # 1 on host mktibackup
Could not mount media from TLD(0), slot # 1
File name already exists
We're running NB 5.0 MP5 with two TLDs, TLD(0) and
Got it. Found some old MNT_BY_SLOT_x_x files lying around in
volmgr/misc.
Duh :)
Thanks,
Jan
-Original Message-
From: Chaves, Jan Amcil L.
Sent: Thursday, January 05, 2006 10:26 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject: vmphyinv File name already exists
Hello! I get
22 matches
Mail list logo