Hello
Does somebody know what this tapealert means ?
Have tried both Symantec knowledge base IBM's website as our drives and
robot is IBM without luck
It happened when I did a redirect restore from one Netapp filer to another,
there is nothing the logs on either Netapp system
Regards
Michael
Dear NetBackup experts,
Does NetBackup v6.5 support for BMR Boot Server under Windows 2003 Server
Enterprise x64 Edition?
If it does, then where can I find the source/installer/binary of it?
I didn't find it in NetBackup Installation Package for Windows x64, but I can
find it in NetBackup
Hi,
System: NetBackup 6.5.5 server running on Windows 2008, client on Windows 2003,
2008, Linux(Redhat) and NAS (NDMP)
I have migrated our Netbackup server 6.5.5 to a new hardware. Everithing seems
to work fine except one thing, the Reports.
All Reports result are empty Search completed with
Could be this
268 0x1e
269 Hardware A
270 Critical
271 The tape drive has a hardware fault:\
272 1. Eject the tape or magazine.\
273 2. Reset the drive.\
274 3. If the problem persists, call the tape drive supplier help
line.
275 The drive has a hardware
I'll second that, convert to decimal 0x1e = 30 and then go here, same codes
apply for Netbackup and BackupExec
http://seer.support.veritas.com/docs/230206.htm
Regards
Mike
From: veritas-bu-boun...@mailman.eng.auburn.edu
All,
I've got a co-worker fighting with an issue neither of us have much
experience with. He's successfully configured our Exchange 2003 mailbox
backups (Netbackup 6.5.3.1 all around) with the required accounts,
backup selections, etc. and can cherry pick individual mailboxes and
backups
Perhaps it is an oracle thing?
I had our DBA remove the check logical parameter and our throughput improved
10X
--
Message: 11
Date: Tue, 9 Mar 2010 13:11:49 -0600
From: Heathe Yeakley hkyeak...@gmail.com
Subject: [Veritas-bu] Tru64 NetBackup Performance
To:
OK...thanks Marion.
We are now chasing that down and seeing if we can get that taken care of.
Thanks very much.
+--
|This was sent by dpe...@acxiom.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
NBU 6.5.2 is the version providing BMR support (server+boot server)
for Windows x64.
On Wed, Mar 10, 2010 at 12:08 PM, Adrian Soetanto
adrian.soeta...@bentoel.co.id wrote:
Dear NetBackup experts,
Does NetBackup v6.5 support for BMR Boot Server under Windows 2003 Server
Enterprise x64
We normally restore mailboxes to a recovery storage group and then use exmerge
to merge the two without this duplicate issue you are seeing.
-Jonathan
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jonathan Dyck
Sent:
Hello,
I am planning to partition my dell 6020 as part of my KMS encryption
project. My library has 2 LTO-4 and 4 LTO-3 drives. What is the Best
Practice for managing a library with different drive models? Do most
people partition their libraries or use different media types in
Netbackup?
I just use the different type of media within netbackup. HCART2 for my
lto2's and HCART for my lto4's. Easy.
Scott Chapman
Senior Technical Specialist
Storage and Database Administration
ICBC - Victoria
Ph: 250.414.7650 Cell: 250.213.9295
From:
Same here, simple - works fine. "Chapman, Scott" scott.chap...@icbc.com 3/10/2010 1:12 PM
I just use the different type of media within netbackup. HCART2 for my lto2's and HCART for my lto4's. Easy.
Scott Chapman
Senior Technical Specialist
Storage and Database Administration
ICBC - Victoria
To answer your question about the partitioning, when you partition the
ML6000 yes, you see separate libraries, robotic control arms, drives and
slots. However, I agree with Scott that it would be less complex to use
different media types, as long as you segregate your barcodes.
-Jonathan
Hello List, I'm wondering if anyone out that is using SSIM to centralize
their logging. We have begun to use it here, but from what I've found,
NetBackup 6.5 running on a Solaris master isn't supported by any of the
collectors that Symantec provides... So, I'm hoping somebody out there
is doing
Dear All,
Once you have setup the KMS and assuming you want to restore them. What is
the necessary info required to restore.
Pool Name ??
Key Name = ??
Key Tag ??
etc
Phase-1 and Phase-2 don't show this info.
From where we will get this info for the restore.
With Warm Regards
Hello there,
I think I've found the solution:
http://seer.entsupport.symantec.com/docs/326387.htm
Thank you.
--
Best Regards,
Adrian
-Original Message-
From: Bahadir Kiziltan [mailto:bahadir.kizil...@gmail.com]
Sent: 10 Maret 2010 23:58
To: Adrian Soetanto
Cc:
Has anybody successfully setup a trunk group using hp-ux ia64?
I currently have 4 media servers and a master server that are all hp-ux ia64
11.23 -- I've got apa configured using LACP_AUTO and LB_MAC -- however I
only see netbackup traffic being passed through one interface. When I start
an sftp
18 matches
Mail list logo
